No fields displayed while creating transaction variant

Hi,
I am trying to create a transaction variant via SHD0 for the tcode 'VF31'. I enter the ZVF31as transaction variant in the transaction variants tab and click on the create button. It takes me to the VF31 screen. From there when I click on Back or Exit button, it takes me to the change transaction variant screen. Although I did get the fileds listed the first time, I am unable to get the same subsequently. Is this a GUI problem? Quick response would be much appreciated.
Thanks,
Preethi

Selection variant is possible to VF31. If selection screen is 1000 ( Executable programs) then we cannot create Transaction variant,

Similar Messages

Problem while creating transaction variant for transaction KCH1.

Hi All,
I am trying to create transaction variant for KCH1 transaction code.
I am able to deactivate standard navigation options Change, Copy, Delete for the menu called "Group" in the main screen.
But I am unable to disable the standard navigation options for the menu u201CGroupu201D in the second screen where we enter possible profit center values in hierarchal structure. I want to deactivate u201COther Groupu201D , u201CChangeu201D and u201CCopyu201D In the hierarchy screen.
Please advice.
Thanks & Regards,
Padmasri

Hi,
As I have already mentioned in my previous message, I am able to deactivate standard menu options by using Menu functions for Main screen where we provide Profit center group value which needs to be created. For this screen I have passed GUID START_CO and was able to deactivate required options. But for the Hirarchial screen, I am unable to deactivate some of the menu options. In menu functions I have passed LIST_01(GUID for the screen) and deactivated the options but was not reflecting which testing the transaction variant.
Anyone please let me know if transaction variant work for my scenario. If no please suggest a solution.
Thanks & Regards,
Pratima

Error while trying to create Transaction variant for FV60 layout change

Hi Gurus,
I am trying to change the "order/sequence" of FV60 layout (rearranging columns). For which I tried to create Transaction Variant (in sandbox). I keyed in the t-code (FV60) and gave a variant name in the field for Transaction variant. But it gives me a wierd error - "Enter transaction code". Has anybody come across this before? This is enhancement pack 7 so the config button is not available.

Thanks Ravi. I went through the note and did exactly the same. But the two check boxes displayed in the note for "Adopt column sequence" and "Adopt column width" is not displayed in my screen!!! Screen shot attached.

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

Problem in creating transaction variant

Hi all,
I am trying to create transaction variant for F- 41 transaction . it's giving an error message .
Variants are possible only for dialog transactions.
Message no. MS417
Diagnosis
You cannot create variants for variant or parameter transactions.
Procedure
Variant transaction: Adjust the variant
Parameter transaction: Adjust the parameter(s)
i need to disable the filed 'document type' .
Guide me.
Regards,
Ravi

Hi,
You can copied into SAP standard program to Zprogram and then use the Loop at screen....Endloop to disable the Documnet type.
FYI...If you go for F.14 transaction there you find Sytesm----> status .. there you will find SAP standard program. Make a copy to Zprogarm and try to disable it.
Regards
Thiru

Add a custom table for field selection while creating field catalog for LIS

Hi,
I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
Regards,
Akash Sinha

hi,
You need to add your field in the Data Dictionary first. For example, if
you want the new field in the Order Item field catalog do the following.
Look at structure MCVBAPUSR (SE11). If you already have a user structure
appended to this structure then you can add your new field to your existing
structure. If there is no structure already appended to MCVBAPUSR then you
must create a new structure with your field in it and then append the new
structure to this one.
If you look at structure MCVBAP you will see the data appended to the end
of it.
Now you should see it in the field catalog.
regards,
balajia

How to make ship to address fields mandatroy while creating sales order

Dear forum Members,
My client oraganizes trade shows and hence ship to address vries everytime when sales order is entered for the same sold to party.So one times ship to customer is used in the sales order and address is entered at sales order level. Please note that at master data level all address fields are suppressed for one time customer.Hence there is no question of going back to one time customer account group and making any field mandatory.
While changing address for ship to at order level, there are few fields which are mandatory, for example city is mandatory. I also want to make zip code and region as mandatory.where is this controlled?Please note that this is not account which controls this. i have already done lot of r&d on account group and transaction variants which are not controlling these fields at sales order level.

Hi Kanwal,
Only incompletion procedure will not suffice for your requirement.
You need to make the field mandatory wherein, if you dont enter, system will not allow you for enterin further fields. For this you should do the following:
Goto transaction SHD0, you will get a screen where you need to enter you Tcode "VA01"
Below you define a transaction variant (starting with Z).
On the next tab you have Screen Variant. Here you enter screen variant name, program name & screen number.
Then you click on create.
Its like as if you are doing some kind of recording. Finally you will reach to the screen where there are options available to make the field mandatory.
For your reference the program is SAPMV45A screen number is 4001.
Further screen are self explinatory.
Hope this should solve your requirement
Regards,
Dhananjay

How to create Transaction Variant for T code F-30

Hi
I want to create a Transaction variant for T code F-30, so that user can't change the currency field and put any value in rate. Currency should be always in USD.
Any input will be heighly appriciated.
Regards
Shiv

Hi,
In that case you can use transaction SHD0 to create a transaction variant for F-30 with its screen variant for screen# 122. And you also want to creat a so called Variant Transaction Z-something for F-30 using the mentioned transaction variant. You restrict users to use that Z-something. For other unrestricted process, the system will still cal F-30. Here is the documentation:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/67/232037ebf1cc09e10000009b38f889/content.htm
Regards

Create transaction variant of mm01 - can't fix material type

Hi,
I am trying to create two transaction variants for MM01 called ZM0R and ZM0F for raw and finished materials respectively.
I have created them and all the fields I want as Required are working.
However, I want the material type to default in as raw for ZMOR and as finished goods for ZMOF. I have ticked "with content" and "required" but it is not working. Whatever material type was last used in MM01 still comes in.
I have also tried creating a copy of MM01 using Se93 to see if I can get it to work this way but when I test it, I get a message Sap Transaction control and can't seem to get past that.
Any ideas?
Thanks

Hi Jurgen,
worked a treat, thanks!. I have another related problem...my backflush field in MRP2 is not appearing. I have checked the field groups and it is there, group 74, for the material type and marked as Optional. Is there somewhere else this can be hidden?

How to create Transaction Variant

Hi all,
I have a requirement like this
I need to create a transaction variant for the table CEPCT, for the transaction SE16 and want to disable or invisible CREATE and CHANGE options in that
Can any one help me out in this requirement
Regards
Srinivas

Hi,
Recording a Transaction Variant
Transactions variant are recorded through transaction SHD0.
   1. Enter the transaction code you want to record u2013 here BP, and press enter
   2. Enter a name for your transaction variant u2013 here Z_BP_NO_PERSON. Please notice that the naming convention for transaction variant requires that it starts with Z or Y.
   3. Push Create
You have now called transaction BP in recording mode.
   1. When you push the exit button you will get the following popup
   2. Enter a name for the screen variant u2013 e.g. Z_BP_NO_PERSON,
   3. Press the deactivate menu function, and you get the following popup.
In this Popup you can deactivate menu functions.
   1. Open the Menu Bar à Business Partner à Create
Position the cursor on u201CSCREEN_1000_CRE_PERS Personu201D
   2. And push the deactivate button.
   3. Push enter
   4. And u201CExit and Saveu201D
   5..Save the Transaction Variant.
Thanks,
NNR.

Segment field missing while creating profit center master data in SAP ECC6.

Hi,
I am working on ECC6.0 IDES. When I create profit center master I dont see the field for Segment on the profit center master.
Is there any setting which needs to be activated to see the the field for Segment on profit center master.
Regards,
Raghav

HI Raghavendra,
Check if the segmentation scenario is available for general ledger at the following path
Financial Accounting (New)>Ledgers> Fields > Customer Fields > Display Scenarios for General Ledger Accounting
Regards
Sach!n
Edited by: Sachin Bhutani on Mar 26, 2009 11:23 AM

Price Field Changeable while creating the Shopping cart

Hi We are in SRM 4.0 and follow a classic scenarios.
For some materials we run program EBP_GET_BACKEND_PRICES
and get the prices from the backend, how ever while creating a shopping cart if the price differs we need to change the price but the field is grey.
how do we change the price ????
EX - My MAP in R/3 for Material A is 100 Rs. how ever while I create a shopping cart the price i need to enter is 102 how do I change the price.
can anyone throw light on this.
regards,
Nimish Sheth

Nimish,
for this you have to change the standard code.
In screen communication structures, there is a flag "price_changeable" that controls the edit mode of price field.
You have to change the standard logic to implement your behaviour in FORM price_changable_set from include LBBP_SC_APPF92:
IF es_item-mode EQ gc_display OR
    ( es_item-rfq_ind EQ gc_yes AND es_item-price IS INITIAL ).
    CLEAR: es_item-price_changeable.
ELSE.
    IF NOT es_item-catalogid IS INITIAL OR
       es_item-price_origin EQ c_price_origin_f OR
       iv_scenario EQ c_sc_generic_soco OR
       iv_scenario EQ c_sc_generic_history OR
       iv_scenario EQ c_sc_generic_workload OR
       ( es_item-price NE es_item-gross_price AND
         NOT es_item-price IS INITIAL ).
      CLEAR: es_item-price_changeable.
    ELSE.
      es_item-price_changeable = gc_yes.
    ENDIF.
ENDIF.
Rgds
Christophe

No member Disk displayed while creating Diskgroups for new ASM instance

Have installed CRS
Have installed DB software
Invoked dbca to create asm instance
Instance created
Disk members not displayed for creating disk groups
OS is Hp ux 11.23

The most likely reason on HP/UX is the permissions on the devices, all the devices to be used by ASM (including the devices for alternate paths) should be set to oracle:dba (or what ever user ASM is installed under) and chmod to 664.

New field catalog VOLEH does not display while creating a new table

Dear Gurus,
I added new field as VOLEH in field catalog. However while I am creating a new table, new field (VOLEH) does not showed in field catalog...
How can I fix this error?
Kind Regards,

HI
Check once again in IMG>SD>Basic func>Pricing >Pricing control>define condition table>conditions : allowed fields> go to new entries then press F4
check here newly created field is there or not
(or) when creation of condition table check properly next page button in menu bar
still if its not found
Note 21040 - Allowed Fields not appearing for condition table
or check this link
http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Regards,
Krishna.

PR00 should automatically display while creating sales order

Hi,
PR00 should automatically display in sales order and i have to enter price only without maintain condition record.
i dont want to enter PR00 and price.
PR00....................................1000
Defaultly that pr00 should be display in the sales condition and price filed should be blank.
so that i can enter price for that condition type PR00.
my client dont want to enter condition type every time.
Thanks in advance
by
babs

Hi,
Thanks for ur reply.
But my requirement is not that.
I am creating sales order and entered customer number, material and qty.
now system throw an error PR00 Mandatory pricing missing
In Item overview select condition tab
There u have to enter PR00 ............1000
Instead of this, PR00 should be there and price field should be blank.
now i can enter only price for PR00 condition type.
I dont want to select condition type(PR00) each and every time while entering price.
I hope now you understand my requirement.
Thx in advance
babs

No fields displayed while creating transaction variant

Similar Messages

Maybe you are looking for