No file explorer and direct install of apps frm un...

File explore is the most important we require...and the next thing is we cant download songs from internet in phone directly...nd last bt never the least cant install apps directly frm unknown sources as androids have...even a 3000₹ android phone have these avails...android is more likely to laptops bt NT windows phone??? Shocking...

leoaristocrat wrote:
hi all i am a new commer here dont know hoe to start a new topic actuly iam a student and i want  to have a windows phone lumia 625 attracts me alot but people scare me that apps dont run properly its bluetooth doesnt work properly and it fails plz help me iam in confusion 
To start a new topic use the link that says 'New Message'
Apps? I have over 50 installed and have not had a problem with the app not doing what is supposed to do, more specifics might help.
The bluetooth problem is with some vehicles, pairing and using handsfree. Some vehicles it works just fing.. We have two BT stereo headsets and a little BT box with a 3.5mm connection for speakers. Just need to do a little searching to check before you buy a BT headset  A lot of users think they need a constant BT connection to transfer files back and forth with a PC. That is not the case. Just pair the phone to a PC and start the transfer and it works. A constant BT connection is not necessary.
The 625 is an entry level phone with a large screen. The 512mb ram will limit you for higher end games along with the 8GB of memory.  Backing up photos constantly takes memory, that can be turned off. If you already have music install an SD card, 16GB. In music+video settings, turn off "connect to xbox music"
Before you turn the phone on have your MS outlook.com email account setup. That is your account for everything.
Windows Phone How-To
http://www.windowsphone.com/en-us/how-to/wp8

Similar Messages

  • HT5409 I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get.

    I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get. anybody?

    I also had issues opening AVCHD files on case-sensitive filesystems.
    You can try these steps to solve the issue:
    Right click on the AVCHD file and select 'Show Package Contents'
    Right click on the BDMV file and select 'Show Package Contents'
    Rename index.bdm to INDEX.BDM (it seems that all files in the BDMV folder should be in UPPERCASE for Quicktime to open the AVCHD file).
    Go back twice and try again to double-click on the AVCHD file (Quicktime should open a window showing the multiple clips, as expected).

  • In Numbers for IOS8, when I double tap a cell it no longer displays the Input Ba, just the number keyboar. It worked fine until yesterday. I've tried deleting and re-installing the app.

    In Numbers for IOS8 when I double tap a cell the Input Bar no longer appears - I just get the number keyboard so I Canwick't select the text keyboard or the formula keyboard.  It has worked fine for ages but from yesterday I have this problem.  Deleting and re-installing the app has no effect.

    Hi 902tig,
    This is the Numbers for Mac forum. While some of use use Numbers on iOS you might get more responses on the iWork for iOS forum.
    quinn

  • Someone else set up my apps on my iPad. Now when I load find friends it shows him instead of me. I rebooted and re installed the app. How can I remove him even though I'm signed in under my apple account

    Someone else set up my apps on my iPad. Now when I load find friends it shows him instead of me. I rebooted and re installed the app. How can I remove him even though I'm signed in under my apple account tnx

    deltajane wrote:
    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    This is the article that will assist with this part of your post:
    http://support.apple.com/kb/ht4486
    deltajane wrote:
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
    deltajane wrote:
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
    Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

  • I can't install any app frm store. it shows NSinconsistencyexception error?

    i can't install any app frm store. it shows NSinconsistencyexception error?

    Hi..
    Installing the appropriate combo may help as that reinstalls the App Store for you.
    For Snow Leopard v10.6 >  Mac OS X 10.6.8 Update Combo v1.1
    For Lion v10.7 >  OS X Lion Update 10.7.4 (Client Combo)
    Restart your Mac after the combo is iinstalled then try the App Store.
    Tip..   when you post for help, please tell us which Mac OS X you have installed 

  • Copy Files to new iMac and fresh install of Apps?

    I am upgrading to a new 27" iMac from a Mid (2007) 24" Core 2 Duo
    My understanding is that setup assistant or migration assistant, will copy over my user data, applications, etc....  My issue is, I don't want a lot of that copied over to the new machine.  For instance, If I understand correctly, if I copy the Apps, it is an all or nothing scenario, correct? 
    Would I be better off just setting up the new iMac "as-is" out of the box, and just reinstall the apps that I want?
    Also, for my user directory, couldn't I just copy those files off to an external hard drive from the old machine, and copy them back into the new one?

    With a new Mac running Mountain Lion, I would install the latest (newest) versions of all apps from scratch.  I would not migrate apps from an older system.  You said your existing Mac is a 2007 iMac - what version of OS X are you using?
    You can easily transfer all your data files (things that are in your old user folder and elsewhere on your old Mac by starting it in Target Disk Mode and connecting it via FW to your new Mac.  Then just user the FInder to copy whatever files/folders you want to transfer to your new iMac. There is no need to do a "double copy" by copying them to an external drive first, and then copying them a second time from the external drive to your new iMac.
    Note: you will probably need the Apple Thunderbolt-Firewire Adapter to do this.

  • Dll file is missing on installing the app-v 5.0 sequenced application

    HI All,
    I have sequenced a application using AppV 5.0 Sequencer. During sequencing the application is fine, I gave the PVAD as C:\Program Files (x86).
    After installation of the sequenced application, on launching the shorcut it throws error that 
     "The program cannot start because PBVM100.dll file is missing from your computer. Try re-installing the application".
    I searched for that dll file, the weird thing is the dll file is present in the ProgramFiles(x86), but still i dont why the application was throwing such an error.
    If I install the source it is fine, but if I install the sequenced application it throws error.
    I even tried connection groups through SCCM 2012, it is still throwing the same error.
    I am out of ideas. Can anyone help me on this issue.
    Thanks in advance.

    Hello Cody. I created a sequenced
    Actuate 7 eSpreadsheet Designer 10.0.2 with Appv-5 Sp2. I published the package using the Powershell commands, but When I tested the app in this test machine the app never openned. The process eSpreadSheet.exe cosumed the 99% of the CPU and never
    open the app. I performed a Devirtualization in another machine and it looks work properly, So I think it's a virtualization problem. Do you have any idea how to fix this?
    Note: I created another sequence including all the DLLS detected in SystemX86 in the same directory where the exe file resides for this application C:\Program Files\Actuate7 as you suggested in the last entry but I'm still having the same problem.

  • Question about Windows File Explorer and offline attribute display

    In previous releases of Windows (including Windows 8), Windows File Explorer would display a small "x" icon if the offline file attribute was set.  In Windows 8.1, Windows File Explorer no longer displays the "x" icon if the offline
    file attribute is set.  Is there a reason this behavior was changed?  Is there an option to get the old behavior of displaying the "x" icon?

    Hello Ed Winn,
    What ‘x’ icon do you mean?
    Please share us the screenshots to compare.
    Based on my test, I can’t find the ‘x’ icon in the offline folder both in Windows 7 and Windows 8.1.
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Offline Files (Background) Sync makes File Explorer and other programs responding slow

    Hi TechNet,
    I have a problem with Offline Files and
    especially with VPN users.
    For VPN users, the slow-link
    policy is activated with a background
    sync interval of one hour. But, when Offline Files is syncing, their File Explorer is hanging (not responding) by creating new files/folders, deleting files/folder, or rename files/folders. This happens only in their (redirected)UserData
    folder or with other DFS shares which are cached locally. In other programs (Outlook or Office 2010) when they save data in the UserData folder exactly the same things happens (not responding).
    This problem occurs in both the
    internal network and via VPN, so bandwidth is
    not the problem. When the sync is finished, everything is working fine again.
    I've tested:
    - Offline mode with scheduled background sync: problem occurs
    - Online mode with manual sync: problem occurs
    - Rebuild offline cache database: no effect
    - Tested with fresh Windows 8(.1) installations and user profiles: problem occurs
    - Monitoring SMB traffic with WireShark: no result
    - Montoring Windows 8(.1) clients with procmon: no result
    - Tested with full DFS paths: problem occurs
    - Disable IPv6: problem occurs
    - Disable Windows Search: problem occurs
    - Browsing in the Offline Files folder (Sync Center -> Manage Offline Files -> View Offline Files) is very slow (with +- 200 files). This occurs also when Offline Files is not syncing.
    Does anyone have an idea how I can solve this problem?
    Thanks,
    Bas
    (Sorry for my bad English)

    Hello,
    May I know if there is any update there?
    Please let me know if I can help you more, thanks.
    BR,
    Steven Song
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
      Hello Steven,
      First, sorry for the late response, I have tested a few things for you:
    Offline mode with background sync over a VPN connection: During scheduled sync File Explorer hangs. When bypass the cache by using a UNC path (State: Online) there is also a delay, but this is caused by bandwidth.
    Online Mode with Manual Sync over a LAN connection: During sync File Explorer hangs in (redirected)UserData Folders (They are always available offline, maybe this is a problem?). With UNC paths, there is no delay…
    The first folder/file is created slowly, but the second is fast.
    It's like csc
    still
    must initialize
    the cache…or something…
    I m  I made some
    print screens, but I can not upload them because my account is not verified.......
    trT  Thanks,
     Bas

  • CC Team License and already installed CS6 apps Causing conflicts?

    Hi,
    I have Illustrator CS6 and Acrobat Pro Xl already on my PC as part of Technical Communication Suite 4 (non-subscription).
    I have been given a seat on a team license for CC today, and after installing the latest Desktop App, this updated Illustrator to the latest version, even though this isn't linked to my CC license. This may be causing a conflict now, as Photshop, InDesign CC etc are only being listed as Trial versions in the Desktop App, not install. I've checked with the Team License Admin and there isn't an issue as far as he is concerned.
    Do I need to Deactivate the version of Illustrator CS6 I have installed and start again?
    Mark

    Hi Kartikay,
    The problem was that I had a personal free Adobe ID logged in to the Desktop app. I removed that ID, got the original invitation deleted and got another invite which then worked when I signed in with my corporate ID. I have experienced issues using Chrome as my browser though, which may not have helped. Chrome displays blank pages when clicking links from Invitation emails and also from within the desktop app.
    I'm on Windows 7 running the most up to date version of Chrome.
    Mark

  • SCP, SSH and SFTP in CMD / File-Explorer and SSH key management with Windows Credential Manger

    Please add SSH, SFTP and SCP in CMD and File Explorer.
    Also, allow us to copy to FTP in File Explorer.
    Would be nice to have the SSH credentials managed by Windows Credentials Manager.

    Even with the RHEL firewall completely disabled, it has the same upper limit. SCP between the Solaris systems, with ipfilter running on both systems and both systems on completely different networks, is not a problem. Between Solaris and RHEL, same network but different subnet, RHEL with no firewall running (only while troubleshooting this, don't panic), still a problem. Using PuTTY SFTP from/to any of the systems is fine, even though on different networks. The mtu on the RHEL was the same as the Solaris systems (1500) - changing values on the RHEL increased the upper limit but still hit a ceiling. Only have one RHEL system so I can't see whether RHEL-RHEL transfers are affected, only those between Solaris, PuTTY on Windows, and the one RHEL system.

  • Is it possible to update an old version of 10.4.11 to a newer version on my ibook? and to install the app store?on my ibook

    Can anyone help me update my old ibook version 10.4.11 to the latest version and possibly be able to install the app store on it?

    Choose About this Mac from the Apple menu and check the processor.
    If it's a G3, no further upgrades are available.
    If it's a G4, buy a retail Mac OS X 10.5 DVD from a source such as Amazon or eBay; Apple still might have copies in stock if you phone them.
    Back up your data before upgrading. No iBook can have the Mac App Store installed onto it.
    (121072)

  • Flat-File Recon And Provision to DB Apps Table

    Hi,
    I have a query relating to the process for recon with Oracle HRMS and creating/updating users in OIM and then approval to provision to target resource.
    The following is detailed process that I am looking for -
    1. Run Recon to get the users from flat file location.
    2. Create users in OIM and based on information from flat file trigger approval process for creation of the users in target resource
    Please tell me what is the process I need to follow to configure the flat file gtc and also to trigger the approval/provisioning process for target resource.
    Thanks.

    Hi,
    To configure the flat file gtc, just go through Admin console guid there you will find all the required steps for flat file recon. Or you can refer the OIM Labs also.
    Now to trigger the db provisioning with approval, you can crete access policy on ALL User group as all the user get created in that particular group. While you will create access policy there is option to check for Approval Required,just chyeck that option and your approval will start tirgger automatically.
    On the other end you need to create an resourceobject, it resource, provisioning process and approval process for database provisioning.
    Let me know if you have any query for the same.
    Regards
    Alabhya Goel

  • Iphoto wont open and cant install of app install disc

    2 days ago iphoto came up as damaged or incomplete when pressed.
    I followed the instructions of here to remove the iphoto pkg files but still could not install iphoto again.
    The disc that came with my mac just fails to install at the end,.
    I really hope i havent lost my photos as there from years ago!!!
    PLEASE HELP!!!!

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Files to copy when install  BI apps (OBIA) 7.9.6.3 on Linux 64 Bit

    So,
    I've installed OBIA 7.9.6.3 on Windows XP and I've installed OBIEE 11.1.1.5 on Linux successfully. Does anyone know which files to copy over from Windows to Linux or any oracle docs that has this.
    Thanks,
    Gary

    Here is the link to the documentation for this step:
    http://download.oracle.com/docs/cd/E20490_01/bia.7963/e19038/windows_ic.htm#BABDCEGC
    This part has changed from 10g to 11g now with WebLogic handling most of the setup.

Maybe you are looking for