No file found installer
I create with the installer a setup.exe. When I let it run, I can choose the directory where I can save the application and the runtime. When I continue I get a error message that file is not found. But there is no description what there is missing. I created a log file but I have some problems to understand it. Is theree a way that I can see where the problem is?
Kind regards Reto
Attachments:
test.txt 1626 KB
Hello halo,
did you include the LV runtime by checking the appropriate checkbox in the "additional installers"- section? Do you have administrator privileges on the computer? But I must admit, this seems rather weird to me.
Greets, Dave
Greets, Dave
Similar Messages
-
No oracle rdbms file found during PI 7.1 EHP1 installation
Dear all,
I am currently installating SAP EHP1 for SAP NetWeaver Process Integration 7.1.
I have filled out all preselections screens.
I have started the installation (enterred the key generated from SAP Solution Manager).
When I reach step 8 - Install database server software, I get this message box :
"no oracle rdbms file found".
Then, eitheir if I click on "OK" or "Cancel", I get the following message box :
"SAPinst now stops the installation" ....
Here, I normally have to start the oracle installation.
I go to /oracle/stage/112_64/database/SAP to start the ./RUNINSTALLER_CHECK
/oracle/stage/112_64 exist, but /database/SAP does not exist !!!
Any idea is very welcome
Best regards
SAP NetWeaverAdmin
Edited by: SAP NetWeaverAdmin on Nov 30, 2011 12:29 PM
Edited by: SAP NetWeaverAdmin on Nov 30, 2011 12:31 PMHello dear sap nw admin,
I've the same problem while installing systems with the latest sw provisioning manager 1.0 sp3
Have you solved your problem by just downloading the latest installation master or have you also updated the rdbms dvd?
Kind regards
Roland -
J2ee1.4 installation error - there are no files requiring installation
hi all,
i downloaded the j2ee sdk 1.4 bundle and installed successfully on my suse 8.2. however when i tried doing it on another suse 8.2 machine using the same bundle i got an error that says :
There are no files requiring installation - here's all the output -
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
Error: There are no files requiring installation.
Deleting temporary files...
i'm new to j2ee so plz, if any one knows how to get around this, let me know.
thanks,
richThis message will be issued if files necessary for installation are not found once the self-extracting executable extracts its content. If you successfully used same distribution file to install on another machine, it is very likely that the distribution file got corrupted while being moved from one system to another.
If you use ftp to transfer files between systems, make sure that you transfer file in binary mode.
If you don't have the original distribution file anymore, you might need to download the distribution again. -
"Template import error: No VM configure file found" on brand new setup
Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name? -
Can't boot after system update - INIT: No inittab file found
Hi i've a pc where i installed arch linux more than one year ago
Its a:
PentiumII 400mhz
192mb ram
2 harddrives (don't know if i use them as a lvm or if each consists of 2 partitions used as mountpoints)
graphic card nvidia TNT2
i wanted to update it using "pacman -Syu" but it didnt worked because TNT2 needed nvidia legacy treiber 71xx don't work with kernel > 2.6.26
so i removed currently used nvidia treiber with pacman and installed the xf86-nv driver using pacman...
after that i think i updated just the kernel (pacman -S kernel26)
and than the system (pacman -Syu)
that was successfully....but after my reboot the shock
INIT: No inittab file found
Enter runlevel:
doesnt matter what runlevel i try i can't get further
what should i do now? please help me and provide me something like a step by step guidemenhir wrote:
what kind of live cd should i use?
is there a arch live cd that has the initscripts package include that i don't require to have my wlan working?
where can i find a good tutorial for "chroot" rescue in my case?
Just use the Arch installation disc -
I downloaded Adobe edge animate CC
version 2_0_1_LS17
Size 143 MB
File hash
MD5 C4A7DBE9B5AA013012E3291239C37028
SHA-1 4A21DB88091034A675F046FDCD0BFDBA6869FCDA
When i install it extracts files (i extract it on my desktop) after extration setups doesn't start and when i went to the folder to start setup manually there is no executable(.exe) file found.
I am using windows 8.1 pro build 9600go here, https://creative.adobe.com/
log in with your adobe id and download adobe edge. the cc app will download and then handle other cc downloads/installs. -
Package files of Installation SBA for Lync Server 2013
Hi everyone,
It´s my first post and would like know where can found the files of installation for Lync Server 2013 SBA (Survivable Branch Appliance).
My appliance is a module SRE-910 with Router 2911
I contacted the microsoft and they said that the files are provided from cisco.
The Guide that I´m following is this:
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=28555
Question posted in forum Microsoft:
http://social.technet.microsoft.com/Forums/en-US/lyncvoice/thread/81a0d1e2-39f2-45ad-9908-f4162e9d302f
Quote of Site Microsoft about software and Hardware requeriments to SBA:
"Required hardware and software is built into the Survivable Branch Appliance"
Someone can give a light ?
Thanks in advance!http://blogs.technet.com/b/xdot509/archive/2012/10/24/installing-a-two-tier-pki-hierarchy-in-windows-server-2012-part-ii-installing-a-root-certification-authority-with-the-gui.aspx
-
Restore from OSB. RMAN-06024: no backup or copy of the control file found
I backed up controlfile for standby on production server to OSB media:
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:15:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: EMGC (DBID=1838014073)
connected to recovery catalog database
RMAN>
RMAN> CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
BACKUP CURRENT CONTROLFILE FOR STANDBY tag 'stb_ctl';
RELEASE CHANNEL ch1;
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN> 2> 3> 4> 5> 6>
allocated channel: ch1
channel ch1: sid=1085 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 25-JAN-11
channel ch1: starting compressed full datafile backupset
channel ch1: specifying datafile(s) in backupset
including standby control file in backupset
channel ch1: starting piece 1 at 25-JAN-11
channel ch1: finished piece 1 at 25-JAN-11
piece handle=1em30ngu_1_1 tag=STB_CTL comment=API Version 2.0,MMS Version 10.3.0.2
channel ch1: backup set complete, elapsed time: 00:00:27
Finished backup at 25-JAN-11
released channel: ch1
RMAN> list backup of controlfile;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
RMAN configuration parameters are successfully reset to default value
starting full resync of recovery catalog
full resync complete
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN>
On standby server I try to restore this control file but there is some trouble with restore... By the way I can delete that backup piece...
-bash-3.00$ rman target / catalog rman/rman@emgc
Recovery Manager: Release 10.2.0.5.0 - Production on Tue Jan 25 15:34:32 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: emgc (not mounted)
connected to recovery catalog database
RMAN> set DBID=1838014073;
executing command: SET DBID
database name is "EMGC" and DBID is 1838014073
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
crosscheck backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Crosschecked 1 objects
released channel: ch1
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
1479 Full 512.00K SBT_TAPE 00:00:18 25-JAN-11
BP Key: 1480 Status: AVAILABLE Compressed: YES Tag: STB_CTL
Handle: 1em30ngu_1_1 Media: mf_rman-000003
Standby Control File Included: Ckp SCN: 33567224 Ckp time: 25-JAN-11
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
RESTORE CONTROLFILE FROM TAG 'STB_CTL';
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting restore at 25-JAN-11
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2011 15:35:20
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN> RUN
ALLOCATE CHANNEL ch1 DEVICE TYPE 'SBT_TAPE';
delete noprompt backup of controlfile;
2> 3> 4> 5>
allocated channel: ch1
channel ch1: sid=1093 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1480 1479 1 1 AVAILABLE SBT_TAPE 1em30ngu_1_1
deleted backup piece
backup piece handle=1em30ngu_1_1 recid=40 stamp=741367328
Deleted 1 objects
released channel: ch1
RMAN>You cannot specify a tag for a standby control file.
read here
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1002594
Edited by: Adigozalov Gurban on Jan 25, 2011 2:14 PM -
MDT 2012- Unattend.xml, or worse, No existing catalog file found.
Hello. Back again with a new issue.
MDT2012. Win 7 pro/ x64.. I've got a an issue with a recently Sysprep/Captured image. It was successfully captured with no errors, but won't deploy... citing
I initially had an issue with an Unattend.xml (the dreaded "5212 Welcome wizard failed" error) and it was suggested I:
Edited Unattend.xml file and : Navigated to the SPECIALIZE step
–highlighted “”amd64_Microsoft-windows-IE-InternetExplorer_neutral”” and
edited the “”IEWelcomeMSG”” feild, and unticked “”write image value.””
This did not resolve my issue, matter of fact, it may have made things worse, but since I'm not an expert, here I am.
The image I captured has IE11 (bad idea?) and the machine is fully patched as of a week ago. My latest error is when I got BACK to UNedit the Unattend.xml file... I'm greeted with this:
Performing operation "generate" on Target "Catalog".
Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "C:\DeploymentShare\Operating Systems\WIN7PRO-X64-JAN29
\WIN7PRO-X64-JAN29.wim" 1 > "C:\Users\(mynameremoved)\AppData\Local\Temp\Microsoft.BDD.Catalog.log" 2>&1
No existing catalog file found.
PROGRESS: 0: Starting.
PROGRESS: 0: Creating mount folder: C:\Users\(mynameremoved)\AppData\Local\Temp\IMGMGR_WIN7PRO-X64-JAN29_WIN7PRO-X64DDrive_pnjtetms.yq5.
PROGRESS: 5: Creating temp folder: C:\Users\(mynameremoved)\AppData\Local\Temp\IMGMGR_WIN7PRO-X64-JAN29_temp_2c1hyp2l.h5y.
PROGRESS: 10: Mounting Windows image: C:\DeploymentShare\Operating Systems\WIN7PRO-X64-JAN29\WIN7PRO-X64-JAN29.wim. This might take a few minutes.
ERROR: Unable to generate catalog on C:\DeploymentShare\Operating Systems\WIN7PRO-X64-JAN29\WIN7PRO-X64-JAN29.wim: System.ComponentModel.Win32Exception:
The process cannot access the file because it is being used by another process
at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
at Microsoft.BDD.Catalog.Program.DoCatalog()
Non-zero return code from catalog utility, rc = 2002
Then upon closing the above window, this sits behind it: ""Unable to edit the unattend.xml for this OS because no catalog could be located or generated""
I see the (an?) error regarding NO EXISTING CATALOG FILE FOUND... as well as PROCESS IN USE BY ANOTHER..
What can I do to resolve the above? And did I give you enough info here...?
Thanks!The part for the disk drivers is ignore able. It applies the image to the disk perfectly it is the unatend.xml file that is missing. Also I have it set up
so if the second disk is missing that is would keep executing. You will notice this further down the line.
I have tested this on real hardware and a VM. the log that I have posted it from a VM (I typed it out by hand). The log for the real machine is basically the same except with out the disk errors (because It has two HDDs). -
Hi i want to exit the program if no file found by FM call file_get name
HI
I am calling a function module which is picking up a file from utility server
presently its giving error message that if no file found it propts for error msg no file found or file could not be opened i suppose its coming by the FM only
now i want to write a code that if there is no file then the program should exit and not execute further but with no error mesage
pls suggest a code for this
regards
AroraHi Nishant,
Try to do as indicated in the following code below
FORM validate_app_file USING fp_file TYPE FILENAME-FILEINTERN.
data : l_fname(60).
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
LOGICAL_FILENAME = P_FILE
OPERATING_SYSTEM = SY-OPSYS
IMPORTING
FILE_NAME = L_FNAME
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = '0'.
OPEN DATASET L_FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
MESSAGE s007 DISPLAY LIKE c_e.
ELSE.
CLOSE DATASET l_fname.
ENDIF.
ENDIF.
Also find below the parameters for the function module and thier use
Interface of function module FILE_GET_NAME
IMPORT parameter
Function
CLIENT
Logical file names can be client-specific. Here you can specify the client to be used. The current client as stored in the system field SY-MANDT is used as default.
LOGICAL_FILENAME
Here you specify the logical filename. (Uppercase letters must be used!)
OPERATING_SYSTEM
Here you can specify the operating system for which to generate the appropriate file name. The application server's operating system as stored in the system field SY-OPSYS is used as default.
PARAMETER_1
PARAMETER_2
Here you can specify values that substitute the placeholders <PARAM_1> and <PARAM_2> in physical file names and paths.
USE_PRESENTATION
_SERVER
Specifies that the presentation server's operating system be used as the basis for generating a platform-specific file name.
WITH_FILE_EXTENSION
Specifies that the logical file name's data format be used as filename extension.
USE_BUFFER
Specifies that the customizing tables for converting platform-independent file names be buffered in main memory.
EXPORT parameter
Function
EMERGENCY_FLAG
If the returned value is not SPACE, then no physical path has been found for the logical filename under the current operating system. In this case the path specified in the profile parameter DIR_GLOBAL will be used as physical path.
FILE_FORMAT
Returns the data format defined for the logical file name. You can use this parameter to decide in which mode to open the file. It is also required as a parameter for DOWNLOAD of files to the presentation server.
FILE_NAME
Returns the fully instantiated platform-specific file name and path.
Exceptions
Function
FILE_NOT_FOUND
Raised if logical file name is not defined.
OTHERS
Raised if other errors occur.
Analyse your problem
If the function module cannot find a physical path for the current operating system (see parameter EMERGENCY_FLAG), this may have various causes:
the operating system is not defined in the customizing tables
the operating system is not assigned to a syntax group
no physical path is assigned to the logical path for the relevant syntax group
no logical path is assigned to the logical file name.
Please check and revert
Also Reward points for all helps.it encorages others to help u more
Regards
Byju
Edited by: Byju Edamana on Mar 20, 2008 11:06 AM -
Hello,
I have a foreach loop in SSIS (as part of Visual Studio 10 and with SQL Server 2012).
It loops over all files in a folder (ForEach File Enumerator).
I set the folder: OK
Traverse Sub folders: OK
I have set up a Variable in Variable Mappings called FileName so it shows User::FileName: OK
Index of variable is 0: OK
It almost works ok. Except that the first file it finds is never considered.
I set a breakpoint then and the first file it finds, is shown in black in the watch variable window. All subsequent files found are shown in red font. When I change the names of the files so another file is the first file found then it skips the other one
which now is the first file.
What is going on here? Why does SSIS skip the first file it finds in a foreach file loop?
Any suggestions highly appreciated.
Thank you
Andi
Andreas"red font - interesting, any example to show us (image)
It would be interesting to share with us whether you use any file masks or expressions.
Arthur
MyBlog
Twitter
It appears a variable value turns red when it changes between breakpoints. It started black for the first value (the first file, obtained BEFORE the execution reached the breakpoint), and then turned red. I was able to reproduce this behavior on a test environment.
However, it did not skip any files.
OP, please set up the test shown in the image below. Create a breakpoint in the sequence container for the "OnPreExecute" event. -
Error: A file found in a source-path must have the same package structure
I use Adobe Flex Compiler (mxmlc) Version 4.1.0 build 16032,I have a file,named CustomGraphContainerController.as,it's directory is c:\controllers,and the GCController.as file is under the same directory,CustomGraphContainerController.as file like follows
package controllers{
import ui.GraphControlContainer;
public class CustomGraphContainerController extends GCController {
public function CustomGraphContainerController(a_graphControlContainer:GraphControlContainer) {
super(a_graphControlContainer);
Then I want to use mxmlc command to compile it,like follows:
C:\>mxmlc c:\controllers\CustomGraphContainerController.as
But it raise compile errors,like follows:
Loading configuration file C:\sdk\frameworks\flex-config.xml
C:\controllers\GCController.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'controllers'.
I don't know how to compile the as file with package controllers? Where is wrong? How to use mxmlc to compile it?
ThanksHI,
You should have one main application class to compile this as code to swf.. So that main application path should be in your proper package structure.. then you can compile you app and as files also...
Thanks
Ram.. -
Very odd and very large file found in system library: maremoted
Hello,
Using a single 1.25 G4 with 10.3.9. It's been acting up and running out of space.
We located a file called maremoted, (which we're guessing is some kind of Remote Daemon), fil, which is upwards of 30 GB. It's run by the root user and trying to trash it causes a Kernel Panic. We took out the drive and sey it as a slave to mine and I deleted it.
The machine started up fine, but it's come back and growing. It's currently 1 GB.
Anyone have any idea what this thing is and how to get rid of it?
Thank you for any suggestions.
-VincentThis is a daemon that is running as part of the Track-It! auditing software by Numara. I have it crashing on several Macs and respawning with a new PID which makes it impossible to kill the process. The only file that I have found growing in size is the log file found in /Library/Logs/Track-It!/Mac Audit. Both the maremoted.log and the maauditord.log are growing in size from the crashdumps. Possibly due to the server and the clients being out of sync version wise?
The symptom is as you describe; sluggishness and unresponsiveness while performing various tasks such as Application switching, network file transfer, and typing.
Placed a call into Numara and the two Mac experts are not in to assist. Will be calling first thing tomorrow. -
Trigger email if no file found
Hi,
I have a requirement like below:
Every day interface will run between 4.00 AM to 4.30 AM. In this case file will be picked from aplication server(NFS) and processed by using proxy(FILE to PROXY communication). In this stipulated time 4.00 AM to 4.30 AM, If there is no file found in NFS path for current date and time, then I have to trigger an email saying that there is no file found.Hi,
Check if in your case you can trigger alerts from XI, if file is not present at source location and communiation channel is giving any error for it....
Check out below link...
How do I configure an auto-email alert for Adapter engine errors
Configuring Alerts for Adapter engine errors
Amol -
ERROR ITMS-9000: "Unmanifested file found : "file name".epub:/iTunesArtwork" at Book (MZItmspBookPackage)
I am having the above error message at the last step of submitting an ebook to the ibookstore. .
A call to apple did not yield any solution. It was suggested to me that I contact itunesconnect by email. As it is I have been waiting for about a month now to get responses to the emails I sent to itunesconnect and the ibookstore about another issue.
Anyone has a solution to this? if you so, please let me know.
Thank you.https://discussions.apple.com/message/17782799#17782799
I thinks this link will help solve your issues. It worked for mine.
Maybe you are looking for
-
How do you change the font size on text message
The font on my texting message is really big and how do I change it?
-
Hi, I recently bought my iPhone5 second hand off a friend. Having inserted my sim the O2 network logo and 3G symbols appear in the top left although there is no signal registered. I am also unable to make or receive calls as well as use the mobile
-
RT startup applicatio​n with C code DLLs deployment problem
Hi! I work with LV 8.2 at host PC and LV RT 8.2 at PXI RT 8186 controller. I have made VI which uses some C code from one of my DLLs. For making DLL I used CVI. My VI with DLL is working good when deployed on RT directly from developer interface. S
-
Are scripts for converting HTML unnecessary now?
These scripts were needed before for applets made with a newer Java-version, when Internet Explorer had an old Java-version. Nowadays, when Windows XP and Internet Explorer has no Java, I suspect that this script causes trouble instead. Is it best to
-
Greetings all, What sort of SODIMM modules does my printer take? I believe it has 144 pin card slots, taken from what I have gathered. I am looking for specifics such as voltage, chip type, etc. NFO I would need to identify it characteristically. Muc