"No File" on my Alpine headunit after changing to OS 3.1

I use my iPhone (as well as 3G, 3GS, iPod) with my headunit on a regular basis. However, since upgrading the firmware to OS 3.1 the headunit displays "No File". This has only happened since the 3.1 upgrade. All other firmwares haven't caused a problem. And that's starting from the first 3G released. Help Apple!

I had the same exact issue after upgrading to 3.1. I use my iPhone on my Alpine KCA-420i hooked up to a CDA-9835 all the time but as soon as I did the 3.1 software upgrade my head unit now says "no disc" which essentially means it doesn't recognize the iPhone. I tried it on my dad's head unit and iPod interface which is a newer model and his says "no file" like you're describing.
I have a feeling Apple is going to blame Alpine and Alpine will blame Apple on this one and we'll all be screwed, but hey, I'll post up on here and maybe Apple will see this and realize something they did screwed stuff up for a bunch of users and release a fix.

Similar Messages

Lost all files and applications installed after changing user profile in the registry of windows 8.1 pc

The original user profile on my windows 8.1 pc is C:\Apple\acer sm. I tried changing it to C:\Apple\Apple. After I rebooted my PC, I found out that all my files and applications are lost. What shall I do to recover them?
Your help would save my life. Thank you!

Hi AppleMist,
We wonder if you changed the registry entry or path of user profile.
If you did that in registry please try changing it back.
After changing your user profile and reboot, system won’t read the profile you changed but a new user profile (C:\Apple\acer sm or TEMP) should be created by system. Try renaming this new one as acer sm.old and changing the apple back to acer sm.
It should works fine if you didn’t change file in profile, if it doesn’t work perform a system restore.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't find some files after changing drive name

I keep all my music files on an external drive, and my iTunes folder (and iTunes Music folder) on the internal drive. After changing the name of the external drive, a good number of files (not all, and probably not even most, but a lot) couldn't be found by iTunes.
I'm suspecting that this problem results from having my files stored externally and separate from the internal default iTunes Music folder, but I'm hoping someone can give me some more details about this and hopefully help find a solution. Thanks.

In the root of the filesystem there normally is a folder "lost+found", in which files with strange names are found. These are the files cvfsck has collected in the recovering of the filesystemnames. It is sometimes not possible to recover the original file name and location. So this is the only way for cvfsck to give them back.
If you think the content of these files is allright, you can rename and relocate them.
Regards
Donald

After changing my graphic card to an ASUS Strix GT 970, Photoshop CS6 opens the JPG files without show them on the screen

After changing my graphic card to an ASUS Strix GT 970, Photoshop opens the JPG files without show them on the screen

Try turning off GPU support in your Photoshop's preferences performance section. Also check that you have installed the latest device driver installed for your GT 970 adapter and that all CS6 updates are installed... Your CS6 should be version 13.0.1.3....

I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edi

I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edit the file, but when i open AE, it still the old same keys.
How to have this working? And why until now, we don't have a GUI for shortcuts?
I use the Apple Wireless Keyboard, and need to change the preview keys to a suitable ones, because this keyboard don't have the num pad.
Until CS6, i was using ? and Shift+?, in the place of some kind of Zoom.
But this time, i edit the file, in a sort of way i tried, and non of then change at all.
WE NEED A GUI in AE Preferences to CHANGE THE SHORTCUTS!
Thank You!

The best way to add a +1 would be for everyone to file a feature request. Those are officially tracked by Adobe (unlike this user-to-user forum) and the more people that ask for something, the more likely it is to be implemented.

After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

How do I reconnect media after changing file name?

The original file name is 1001.WAV I changed it to Take1 . How do I relocate the files? I use Pluraleyes to sync all my files.
Cheers, Greg

Change it back. NEVER change file names in the Finder level if the media is in an FCP project. Change it BEFORE you import it into FCP...or change the name IN FCP. What you did was bad bad wrong wrong. Expecially since you already did things like sync it up with pluraleyes.
Change it back. Then change the name in FCP.

Message Server Unreachable (after changing IP address at host)

Hi guys,
I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
This is what I got from dev_rfc.trc:
ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
This is what I got from dev_disp:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
Anyone has any idea?

Yes I'm on Windows, the path that i'm refering is:
winnt/system32/drivers/etc/services
winnt/system32/drivers/etc/hosts
Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
Thanks guys

Delete flat file from the local drive after downloading in the program

how to delete flat file from the local drive after downloading in the program
I am using gui_upload to upload flat file data in internal table. and after that i dont want that flat file in the disk. i want to delete it.

Once the file has been uploaded into the internal table call the FILE_DELETE method of the class CL_GUI_FRONTEND_SERVICES.
DATA: v_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_delete
EXPORTING
filename = 'C:\TEMP\MATERIAL.TXT'
CHANGING
rc = v_rc
EXCEPTIONS
file_delete_failed = 1
cntl_error = 2
error_no_gui = 3
file_not_found = 4
access_denied = 5
unknown_error = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards
Kathirvel

Internet very slow after changing my previous airport extreme to my new 2T TC

Hi,
I just got a new 2T time capsule to replace my Airpot Extreme that worked fine. After installing it I chose to import a previous wifi network to the new TC and my internet became very slow. I read a few online documents sugesting that the internet slows down when backing up large data, but I dont think it is backing up (I did a force quit on systems preferences that "froze" with the cursor becoming a spinning ball) and after that tryed to restart my mac pro, but it has been recovering space from file vault for 2 hours. I am trying to access the internet from my mac air, but the speed is 10% of what I usually get.
Any suggestions? Starting to regret getting the TC, I had high expectations about it.
Thanks
Rubens

Thanks William.
I got help from Apple by phone and aparrently after importing the old airport extreme configurations, my time capsule ended with wrong "Radio channel selection" and after changing the 2.4Ghz to 9 and the 5Hhz to 157 the internet connection is back to normal. thanks

How can we remove the space after changing look and feel to generic

Hi
I want to remove the space which left blank after changing look and feel to generic in formsweb.cfg file.
Can anybody help me to remove this blank space.

Hi,
can you be more specific on teh space you mean?
Frank

Soa managed server is not running after changing weblogic admin password

hi guys....
we have oim 11g deployment on weblogic 10.3.5 ....it was working fine....
we changed the weblogic user password through admin console and changed the boot.properties file also....after that we succcessfully started the adminserver but soa server is not starting and giving following errors...
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy28.login(Unknown Source)
     at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
     at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy46.authenticate(Unknown Source)
     at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
     at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Regards
jdev

Which boot.properties did you update Just the admin server? You need to update this file on each of the servers in the domain. Browse to the soa server directory inside the domain directory and there inside the security directory you should see the boot.properties file. You need to update the password in this file.
-Bikash

Problems saving a file in Adobe Reader 11 after highlighting

Hi,
Has anyone come across a problem where Adobe Reader 11 seems to have problems in saving certain files after highlighting some text?
One of our processes involves checking information and to do this we open up a saved PDF file in Adobe Reader 11 and highlight the relevant text to confirm the amounts have been checked, and then save the file.
This is all done in Adobe Reader - not the full version and not using any external helpers etc, and running under Windows 8 64 bit.
However one of our users is having problems with certain PDF files where, when she goes to save the file after highlighting, it comes up with an error saying that it can't save to this filename and requests that a new filename is entered. If we then save to a new file, and then save as to the original file it works.
So basically this user is having to save the PDF file twice after highlighting - which is annoying.
The strange thing is it appears to only be happening with PDFs created from certain applications on our system (payroll software and BACS processing software) whilst other PDFs work fine. Another user, also using Adobe Reader 11 and also using Windows 8 64 Bit, can open up the problem files, highlight text and save the changes without any problem at all, so it doesn't appear to be the files themselves.
I've tried uninstalling and re-installing Adobe Reader without any success.
Can anyone suggest anything?
Thanks

pwillener wrote:
I'm getting something similar, but the message I get is "...pdf already exists. Do you want to replace it?" I click 'Yes' and the document is replaced under its original file name. This is using Reader 11.0.10.
Sorry - I should have been clearer.
She gets exactly that question, but when she clicks yes, then she gets 'The document could not be saved. Cannot save to this filename. Please save the document with a different name or in a different folder.' At this point the name of the document as shown at the top of the screen has changed to a ???????.tmp filename.
Trying to save this document over the top of the original now works.
It looks like something is locking the original file and only releasing it after the attempted save, which then allows the original to be saved over.
Also using 11.0.10

After changing my mac mini 2009 with a mac mini late 2012, and using Time machine for the reinstallation, Lightroom is operational but Photoshop elements is said to have a license no more valid (code error 150:30). I tried all solution I found to no avail

After changing my computer from a mac mini 2009 to a late 2012 version, all reloaded with Time machine, Lightroom works fine but Photoshop elements refuses to start (error code 150:30; "license no more valid"...). No solution found on the internet works. Any advice ? possibility to reload the application (I have kept the number of license etc.) ? Thanks in advance to anyone who could help.

Alain Picard this error often occurs due to incorrect file permissions or corruption of licensing data during the Time Machine restore. What version of Photoshop Elements were you using? I would recommend that you remove and reinstall it using the uninstaller located in the Applications/Utilities/Adobe Installers folder.

New Depreciation to start from Mar (not Jan) after change of useful life

Hi
Does anyoe has any solution or will there be changes to SAP B1's Fixed Asset?
Let me explain the full scenario as below:
1) Customer has Fixed Assest which has useful life of 25 years, i.e. 300 months.
2) The assets has been depreciated for a few months, e.g from July 2008 to Mar 2009. In FA Master Data, it shows the remaining useful life is 294.
3) From Mar 2009 onwards, the management decides that the userful life is to be 30 instead of 25. The past depreciated value is to remain. The new depreciated value is to be effective from Mar 2009 onwards.
Changes Done
1) In Fixed Asset Master file, under the General tab, a change has been made to the Useful life from 300 to 360. The remaining life is auto-change to 354.
2) Re-run the depreciation for Mar 2009.
3) The new depreciated value is re-calculated from Jan 2009 onwards and the adjustment is posted in Mar 2009.
What is required is that Jan 2009 to Feb 2009 should remain the original depreciated value. The new depreciated value should be adjusted from Mar 2009 onwards.
Please advise is there any solution or proposals.
Example
Asset value = 518749.95
Useful life = 300
Remaining Useful life = 294
Monthly Planned Depreciated Value = 1729.17, Dec Planned Depreciated value = 1729.13
After Changes Done
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Monthly Planned Depreciated Value = 1436.09, Dec Planned Depreciated value = 1436.06
Required
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Jan and Feb Planned Depreciated Value = 1729.17
Mar 2009 onwards, Planned Depreciated Value = 1404.95
Calculation = (518749.95 - 20750 - 3458.34)/352
where 20750 is the depreciated value for 2008 and 3458.34 is the depreciated value for Jan and Feb 2009.
Thanks
Siew Yuen

Hi Yatsea
Let me explain the full scenario as below:
1) Customer has Fixed Assest which has useful life of 25 years, i.e. 300 months.
2) The assets has been depreciated for a few months, e.g from July 2008 to Mar 2009. In FA Master Data, it shows the remaining useful life is 294.
3) From Mar 2009 onwards, the management decides that the userful life is to be 30 instead of 25. The past depreciated value is to remain. The new depreciated value is to be effective from Mar 2009 onwards.
Changes Done
1) In Fixed Asset Master file, under the General tab, a change has been made to the Useful life from 300 to 360. The remaining life is auto-change to 354.
2) Re-run the depreciation for Mar 2009.
3) The new depreciated value is re-calculated from Jan 2009 onwards and the adjustment is posted in Mar 2009.
What is required is that Jan 2009 to Feb 2009 should remain the original depreciated value. The new depreciated value should be adjusted from Mar 2009 onwards.
Please advise is there any solution or proposals.
Example
Asset value = 518749.95
Useful life = 300
Remaining Useful life = 294
Monthly Planned Depreciated Value = 1729.17, Dec Planned Depreciated value = 1729.13
After Changes Done
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Monthly Planned Depreciated Value = 1436.09, Dec Planned Depreciated value = 1436.06
Required
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Jan and Feb Planned Depreciated Value = 1729.17
Mar 2009 onwards, Planned Depreciated Value = 1404.95
Calculation = (518749.95 - 20750 - 3458.34)/352
where 20750 is the depreciated value for 2008 and 3458.34 is the depreciated value for Jan and Feb 2009.
Thanks
Siew Yuen

"No File" on my Alpine headunit after changing to OS 3.1

Similar Messages

Maybe you are looking for