No files will open in PS in CS2 nor trial version CS5
Up to a month ago my PS CS2 was working great. Then one day I found I could not open any files in the program. I tried reloading preferences with no change. I then removed and reloaded the program (Creative Suite CS2), and PS worked great for two days, then went back to the same problem.
I recently downloaded a current verions of CS5 (with all updates) and it has the same problem. I notice in File>Open Recent it shows a record of alll the files I tried to open. I tried using various methods of opening the files, such as through bridge, and explorer. I reloaded Preferences with no change.
I looked for conflicks with my virus program (Vipre) and made PS an approved program, no change. I feel there must be some conflict in my system, but I cannot find what it is. I want to note that I do run a number of video and 3d programs. And all my other Adobe products work great.
I might mention that I did try Fireworks CS5 recently, and it worked great with photos, no problem. The only program that seem affected is PS.
I am running a Dell Latitude (D520) with Windows XP, Professional, Service Pack 3, Intel (R) Core (TM)2 CPU, T5500 @1.66GHz, 1.99 GB of RAM, Physical Address Extension.
I have searched the web for answers, none worked.
I would appreciate any help.
Gerald W -
Hunt:
Thank you for your help.
Now, do you get any error messages? If so, what are they, as accurately, as you
can articulate them. NO. AS I MENTIONED BEFORE WHEN I RELOADED THE CS2 AGAIN A FEW WEEKS AGO, IT DID WORK FOR A COUPLE OF DAYS, THEN STOPPED. BEFORE IT STOPPED THE FIRST TIME I USED THE PROGRAM FOR SEVERAL YEARS WITHOUT A PROBLEM.
What is your graphics card's make and model?
MOBILE INTEL(R) 945GM EXPRESS CHIPSET FAMILY
What is the currently installed driver's version and date?
Intel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 08/05/2011
Report Time[hr:mm:ss]: 11:48:11
Driver Version: 6.14.10.4814
Operating System: Windows XP* Professional, Service Pack 3 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 2038 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 224 MB
Graphics Memory in Use: 17 MB
Processor: x86 family 6 Model 15 Stepping 2
Processor Speed: 1662 MHZ
Vendor ID: 8086
Device ID: 27A2
Device Revision: 03
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 945GM Express Chipset Family
Video BIOS: 1343
Current Graphics Mode: 1400 by 1050 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Monitors: 1
Active Notebook Displays: 1
* Monitor *
Monitor Name: ViewSonic VA1930wm-3
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: 16.0 inches
Vertical: 10.0 inche
Thanks for your help.
Jerry -
Similar Messages
-
Some files in "DOCUMENTS" icon in dock won't open. Get msg saying "You need a newer version of Pages to open this document." Already have Pages 4.1 installed. Same files will open ok from Finder/Pages App./selected file. Prob not noted until recently after sync'd with ipad2 (Pages) when I installed iOS5. Anyone-- please?!
You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Rate/review Pages 5.2 in the App Store.
Peter -
Raw files for Nikon D810 not showing a picture in preview for photoshop cs6 . Have camera raw plugin 8.6.0.250 File will open in ACR and process but no picture before opening raw file.
Are you referencing Apple's Preview application or the Preview panel in Bridge? Huge difference.
Try purging the cache for the offending folder(s) through the Tools menu in Bridge. -
Photoshop CC on Windows 7- No files will open
I am running Photoshop CC, freshly downloaded on 9/26. No files will open and I can not create a file. I select File>Open, but nothing happens. If I go to a PSD file on the hard drive and double-click, it opens Photoshop but nothing happens. I have tried JPG, TIF, PSD, and PNG files, all with the same result - nothing. I am running a PC with Windows 7. I did some searching and saw some people mentioned resetting Preferences and/or Malware, but I have tried resetting Preferences and also several anti-malware programs. There is no change. I'm hoping that someone has an answer for me. Thanks in advance! Carl.
Here's the info:
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 2
Processor speed: 3092 MHz
Built-in memory: 4013 MB
Free memory: 1901 MB
Memory available to Photoshop: 3330 MB
Memory used by Photoshop: 60 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1024, right=1280
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=1782
glgpu[0].GLName="Intel(R) HD Graphics"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="10.18.10.3412"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Intel(R) HD Graphics"
glgpu[0].GLRendererID=1026
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,i gd10iumd32"
glgpu[0].GLDriverDate="20140129000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 10.18.10.3412"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
clgpu[0].CLPlatformVersion="1.2 "
clgpu[0].CLDeviceVersion="1.2 "
clgpu[0].CLMemoryMB=1624
clgpu[0].CLName="Intel(R) HD Graphics"
clgpu[0].CLVendor="Intel(R) Corporation"
clgpu[0].CLVendorID=32902
clgpu[0].CLDriverVersion="10.18.10.3412"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=7.86905e+009
clgpu[0].CLCompute=75.0867
License Type: Subscription
Serial number: 94070495094314310677
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Carl\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 441.5G, 276.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.1
Plugin.dll Adobe Photoshop CC 2014 15.1
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.1
PSViews.dll Adobe Photoshop CC 2014 15.1
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.1 (2014.1.0 x001)
Accented Edges 15.1
Adaptive Wide Angle 15.1
Angled Strokes 15.1
Average 15.1 (2014.1.0 x001)
Bas Relief 15.1
BMP 15.1
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.1
Charcoal 15.1
Chrome 15.1
Cineon 15.1 (2014.1.0 x001)
Clouds 15.1 (2014.1.0 x001)
Collada 15.1 (2014.1.0 x001)
Color Halftone 15.1
Colored Pencil 15.1
CompuServe GIF 15.1
Conté Crayon 15.1
Craquelure 15.1
Crop and Straighten Photos 15.1 (2014.1.0 x001)
Crop and Straighten Photos Filter 15.1
Crosshatch 15.1
Crystallize 15.1
Cutout 15.1
Dark Strokes 15.1
De-Interlace 15.1
Dicom 15.1
Difference Clouds 15.1 (2014.1.0 x001)
Diffuse Glow 15.1
Displace 15.1
Dry Brush 15.1
Eazel Acquire 15.1 (2014.1.0 x001)
Embed Watermark 4.0
Entropy 15.1 (2014.1.0 x001)
Export Color Lookup NO VERSION
Extrude 15.1
FastCore Routines 15.1 (2014.1.0 x001)
Fibers 15.1
Film Grain 15.1
Filter Gallery 15.1
Flash 3D 15.1 (2014.1.0 x001)
Fresco 15.1
Glass 15.1
Glowing Edges 15.1
Google Earth 4 15.1 (2014.1.0 x001)
Grain 15.1
Graphic Pen 15.1
Halftone Pattern 15.1
HDRMergeUI 15.1
IFF Format 15.1
IGES 15.1 (2014.1.0 x001)
Ink Outlines 15.1
JPEG 2000 15.1
Kurtosis 15.1 (2014.1.0 x001)
Lens Blur 15.1
Lens Correction 15.1
Lens Flare 15.1
Liquify 15.1
Matlab Operation 15.1 (2014.1.0 x001)
Maximum 15.1 (2014.1.0 x001)
Mean 15.1 (2014.1.0 x001)
Measurement Core 15.1 (2014.1.0 x001)
Median 15.1 (2014.1.0 x001)
Mezzotint 15.1
Minimum 15.1 (2014.1.0 x001)
MMXCore Routines 15.1 (2014.1.0 x001)
Mosaic Tiles 15.1
Multiprocessor Support 15.1 (2014.1.0 x001)
Neon Glow 15.1
Note Paper 15.1
NTSC Colors 15.1 (2014.1.0 x001)
Ocean Ripple 15.1
OpenEXR 15.1
Paint Daubs 15.1
Palette Knife 15.1
Patchwork 15.1
Paths to Illustrator 15.1
PCX 15.1 (2014.1.0 x001)
Photocopy 15.1
Photoshop 3D Engine 15.1 (2014.1.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.1 (2014.1.0 x001)
Pinch 15.1
Pixar 15.1 (2014.1.0 x001)
Plaster 15.1
Plastic Wrap 15.1
PLY 15.1 (2014.1.0 x001)
PNG 15.1
Pointillize 15.1
Polar Coordinates 15.1
Portable Bit Map 15.1 (2014.1.0 x001)
Poster Edges 15.1
Radial Blur 15.1
Radiance 15.1 (2014.1.0 x001)
Range 15.1 (2014.1.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.1
Ripple 15.1
Rough Pastels 15.1
Save for Web 15.1
ScriptingSupport 15.1
Shake Reduction 15.1
Shear 15.1
Skewness 15.1 (2014.1.0 x001)
Smart Blur 15.1
Smudge Stick 15.1
Solarize 15.1 (2014.1.0 x001)
Spatter 15.1
Spherize 15.1
Sponge 15.1
Sprayed Strokes 15.1
Stained Glass 15.1
Stamp 15.1
Standard Deviation 15.1 (2014.1.0 x001)
STL 15.1 (2014.1.0 x001)
Sumi-e 15.1
Summation 15.1 (2014.1.0 x001)
Targa 15.1
Texturizer 15.1
Tiles 15.1
Torn Edges 15.1
Twirl 15.1
U3D 15.1 (2014.1.0 x001)
Underpainting 15.1
Vanishing Point 15.1
Variance 15.1 (2014.1.0 x001)
Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
Water Paper 15.1
Watercolor 15.1
Wave 15.1
Wavefront|OBJ 15.1 (2014.1.0 x001)
WIA Support 15.1 (2014.1.0 x001)
Wind 15.1
Wireless Bitmap 15.1 (2014.1.0 x001)
ZigZag 15.1
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONE -
Some Tiff files will open in ACR, some not
Hello everyone,
I have tried and read on several posts before posting here to get the solution but nothing foudn till now.
I have LR 5.2 and PS CS6.
RAW files are being managed, worked and converted into Tiff (uncompressed, ProPhoto RGB profile, 350dpi) from Lightroom and then imported in CS6 for further adjusted and layer works, etc..
Some files will be opened via ACR before being opened by CS6 and then some days before, they will just open directly into CS6.
I have checked some settings in LR like " Include Develop Settings in metadata inside JPEG...." which is UNCHECKED/DISABLED and "Automatically write changes in XMP" is CHECKED/ENABLED.
What could be doing this or what could i have messed somewhere?
your help and support well appreciated.
B.Hello everyone,
Apologize for taking so long to revert back but i was out of the country and busy with the end of year work load.
I will describe my workflow for you to get a better idea of the issue am having.
- I take files (Canon CR2. RAW files) from the memory card (Canon 500D, Canon 70D) then copy to my computer / HDD
- Import these same files withing lightroom for selection/rating/etc.. at this stage the .xmp files have already been written beside the .CR2 files as i have a preset for lens correction on import.
- I will then work on the RAW files inside LR 5 for minor adjustments, and then export them in TIFF format.
- I then open PS CS6 then open the TIFF file.
- Some files will open directly in PS while others may open via the ACR window before then i will click on open image to get it in PS.
- I do my adjustments and advanced editing in PS then save the files in same format.
- LR will see the adjustments done outside of LR and i will import the one from disk (to get the changes i made from PS)
This is my usual workflow and i would like to know if LR and PS use the same .xmp files to store the changes done?
Why some files which get the same treatment inside LR opens without getting through ACR window and some will?
Do you need more info? Please let me know and thank you in advance for the support.
B. -
I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open. This is very annoying.
If this is an external USB drive, you must understand that USB is really, really slow. There may be nothing wrong except for that.
In my opinion, USB external drives are only acceptable for backups, and to get "near Hard Drive" performance, you need FireWire. -
Whenever I try to open a file of any type, that file will open, as well as several other files I do not wish to open. How do I prevent this from happening?
Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it. -
I can not open files FH11, Is it because I have the trial version of Illustrator CC 2014?
FH support has been dropped in CS6.
The FH plugin from tensai.co.uk should solve your problem. -
I need indesign cs6 becasue I am migrating files from pagmaker. Can I download a trial version ?
Here is the direct Adobe page.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
No files will open in PS CS5, CS2, or 7.
I have 3 versions of photoshop - none of which will open any files anymore. I've been using them all regularly and then a few weeks ago I've been unable to open files - ANY files. I also cannot create new files of any type with any of the 3 versions I own. (5, 2 or 7). I can't open them through the File dialog or any other manner.
What's strange is that after I have attempted to open a file - it appears in the recent list as if it had been open. There are no error messages. I can't perform any operations on it like save or modifications, so I dont' think it's I can't find my window issue.
Any other Adobe product, such as Illustrator or bridge work fine. It just appears to be photoshop. It's been working fine until now.
I've researched around and tried the various proposed fixes. I've updated my versions, deleted all the preference files, verified the registry is correct and tried the default printer fix.
Does anyone have any idea what could be causing this?Prefs deletion would pretty much preclude dialogs opening on the wrong monitor, no?
I might try getting an updated display driver from the web site of the maker of your video card.
-Noel -
Does my pdf file will open in an iphone/ipad?
Hi there.
I'm having a huge problem with pdf.
I have this file I created with acrobat and I have to send it to someone else. The problem is that they told me "please, make sure your pdf will open in a iphone or ipad without fail."
How do I know if it's ocmpatible? I own a windows computer and I don't have an ipad or an iphone.
thank you!If it's a plain "vanilla" PDF (ie without any form fields, multimedia
elements, scripts, etc.) there should be no problem to open and view it on
an iPad/iPhone (provided there's an app installed that can open it, of
course). -
Under File menu Open File will not open local files even those downloaded to the desktop by Firefox 5.
If I double click on HTML file it does open
Reinstalled. Same behaviour. Default Browser set correctly.
Permissions set correctly. Odd behaviour.Are you sure it hasn't imported?
Check for the track names (trackname only, not Album or Artist)) and see if they have a blank Artist and Album, because WAV files have no MetaData, so are kind of stupid as far as knowing anything about the Artist, Album & track id.
You can't search by 'Untitled' either as there is literally, no name at all, but iTunes does pick up the actual physical track name in Finder and uses that. As an example, if you renamed your Aerosmith WAV file from say 'Toys In The Attic' to 'Love Song' it would import the track as 'Love Song' as that's all it can go by.
There are a few iTunes AppleScripts that let you import from a file of WAV music, by looking at the enclosing Album in the enclosing Artist as that's how most PC progs create the WAV file structure.
Mike -
Only .mov files will open
My iMac hung up today and AppleCare helped me clear out all the caches, reset parameter ram, emptied all the cache files with Secure Empty Trash, etc. Computer now is working great but I find that I can only open movie files with the Quicktime Player. That seems to open all the movie formats that I've tried - .avi, .wmv, .mp4, .mov, etc. But none of my other movie players will open any of my movie files. I have Movist, VLC, Flip Player etc. They used to work with most of the move formats I have. Any ideas why they no longer work?
ThanksThis is strange, but a day later the other movie players now work.
-
URGENT! File will open in the new QTX no matter what done!
Hi!
The script at the bottom of the post worked perfectly on 10.5, but once I installed 10.6 it does not work anymore.
*On 10.5 it was like this:* The script consatntly checks a downloads folder. When a new file is downloaded, the script checks whether it is an .avi file and if it is true, then it checks whether the file name includes phrase "house". If the file is .avi and name contains house, then the file is moved (copied) to an external drive. Then the new file (locted on the external drive) is opened with QuickTime 7, a movie reference file is created and saved on desktop. Then the reference file is added to iTunes.
*On 10.6 it is like this:* The issue is that the newly created (copied) file on the external drive is opened not by QuickTime 7, but by the new QuickTimeX, so eventually it turns out that the file is opened in QTX and QT7 is just launched - the script fails. It is strange because specifically application id "com.apple.quicktimeplayer" (which is QT7) is asked to open the file, but it still opens in QTX.
To resolve the issue, I made a separate script to just check whether the QT7 would simply open the downloaded file (not the one that is moved to an external drive) using the same
+tell application id "com.apple.quicktimeplayer"+
+activate_
+close every document+
+open thisItem+
*and it actually did!*
So I guess that the issue lies somewhere on the fact that the file is opened from a different location or something like that (QT7 can open thisItem, but cannot open theNewFile). To sum up, if the file is not moved - everything works, once it is moved - it does not.
To conclude, the issue MUST be in this line:
*set theNewFile to (move thisItem to (POSIX file house_path))*
PLEASE, PLEASE help! Thanks in advance!
property folder_path : "/Users/reinis/Transmission/"
property family_path : "/Volumes/ALL/Family Guy/Season 8"
property family_season : "8"
on run
tell application "Finder"
set action_folder to ((POSIX file folder_path) as alias)
set droppedItems to entire contents of folder action_folder
end tell
repeat with thisItem in droppedItems
tell application "Finder"
copy name of thisItem as string to FileName
if FileName ends with ".avi" then
if FileName contains "House" then
set theNewFile to (move thisItem to (POSIX file house_path))
try
set my_location to (path to desktop) as text
tell application "iTunes"
launch
make new user playlist with properties {name:"Via"}
end tell
tell application id "com.apple.quicktimeplayer"
activate
close every document
*open theNewFile*
set movie_name to name of document 1
set save_location to my_location & movie_name & ".mov"
save document 1 in save_location
close document 1
end tell
set movie_reference to save_location
tell application "iTunes"
activate
add movie_reference to user playlist "Via" of source "Library"
delay 3
set pl to user playlist "Via" of source "Library"
set ofi to fixed indexing
set fixed indexing to true
repeat with t from 1 to (count of file tracks of pl)
set tr to file track t of pl
try
if tr's played count is 0 then
set tr's video kind to TV show
set tr's season number to house_season
set tr's show to "House"
end if
end try
end repeat
set fixed indexing to ofi
end tell
tell application "Finder"
delete file movie_reference
end tell
tell application id "com.apple.quicktimeplayer"
quit
end tell
tell application "iTunes"
activate
try
delete user playlist "Via" of source "Library"
end try
end tell
tell application "Finder"
empty the trash
delay 2
beep
end tell
end tryHello
It seems you're caught in a typical pitfall.
It's easy to evade.
Replace the line :
set theNewFile to (move thisItem to (POSIX file house_path))
with this line :
set theNewFile to (move thisItem to (POSIX file house_path)) as alias
Brief explanation.
The original theNewFile holds an object specifier of Finder object and therefore 'open theNewFile' is handled by Finder whether or not it's in a tell block targeted to another application. It means 'open theNewFile' behaves the same as double clicking theNewFile in Finder, which will let QTX Player open it under OSX 10.6, I guess.
Meanwhile the modified theNewFile holds an alias object, which is an AppleScript's own object and not owned by any application, and therefore 'open theNewFile' is to be handled by the application to which the immediate context belongs, i.e., to which the immediate tell block is targeted.
Hope this may help,
H -
File will open in CS3 but not CS4?
I recieved a tif, 161.806"x138.889", cmyk at 72dpi. When I try to open the file in CS4 I get "end of file error".
I have to go back to CS3 and open it, save as psd then it will open in CS4. Any idea why?
thanksThere are some files written by CS3 with bad metadata that CS4 could not read.
Or it could be written or modified by a third party program, and CS3 is ignoring the corrupted part.
I fixed a few cases like that in Photoshop CS5.
Maybe you are looking for
-
RRI to Opportunity transaction on CRM UI
Hi All, We are using BI 7.0 and CRM 7.0. I have a requirement of jumping from opportunity BI Report to its opportunity screen on CRM UI. I have maintained sender-receiver assignment but it is not working. Has anyone worked on RRI to CRM transaction (
-
Flex 4 Web Service Introspection For Dynamic WSDL Locations
In Flex 3, introspecting a web service resulted in a constructor that allowed the location of the web service to change at runtime. It appears that the Web Service introspection tool now only allows the single WSDL URI that was specified in the WS W
-
HT200197 My Apple TV not working properly. I can't access my photos and it shuts down.
Don't know how to get help. My Apple TV all of a sudden isn't working properly. It goes to load my library from itunes and takes a very long time to do so. When it finally stops and I click on slideshow it just goes back to the main screen. Help!
-
Error while using metaContainer facet in ADF Faces EA19
Hi all, i have some problem with using mataContainer facet. I use it in the next way: <af:document> <f:facet name="metaContainer"> <meta http-equiv="refresh" content="5; URL=../logout.faces" /> </f:facet> </af:document> It works, but there are some e
-
In Portal ESS> Benefits and Payments > Participation Overview iView is not showing "Flexible Spending" as one of the listed plans. Please advice.