No Fill In the Series

Hi Gurus,
Is this possible in the Xcelsius 2008 Sp3 that we can make series filled with no color , actually i tried to bind the color with no fill cell but by default it is taking black..
My requirement is something like i need to make one series without color ,also unmarking the option of Chart BAckground doesnt help as i have few other charts below it(DV)
Please help.
Thanks
Saurabh

Similar Messages

How Do You Fill in a Series?

How do you fill in a series? On Excel it's so easy, I've been trying to figure this out all day on iWork 09. I have found all the other fill options but I can't find out how to fill in a series anywhere. I've tried everything and I'm really annoyed at this point, please help =(

And of course it's well described in the Numbers User Guide available to every users from the Help menu.
Yvan KOENIG (VALLAURIS, France) vendredi 28 août 2009 10:31:29

Captivate 4.0 - Adjust Font for Fill in the Blank answer selections

I have a series of Fill in the Blank questions on an exam I am creating. However, I need to enlarge the font in the answer dropdown box and cannot find how to do this. Please advise

Hi
I have been using the Quiz section quite a lot recently and I
had not noticed that bug.
I am sorry I don't have an answer to that but I would now
also like to solve it has anyone found a solution for you?
Regards
Ashley

How to fill a date series but skip cells

How do you fill a date series, but skip cells.

Wayne Contello wrote:
A1 is the starting date
A3=A$1+(ROW()-1)/2
copy cell A3 and paste in A5, 7, 9, etc
Alternatively,
A3 = A1+1
Leave A2 blank
Select cells A2 and A3 then grab the "fill" handle (the little yellow circle) and drag down to fill in the rest of the column with the pattern of alternating date/blank cells

Filling in the Blanks - Formula for "specific" fill of blank cells

I am still in the midst of my super extended spreadsheet project and I have come across one more issue that I am sure has an easy solution (using a formula). What I have is a table like this:
!http://i142.photobucket.com/albums/r103/foenixfortean/Blanks.jpg!
What I need is for every blank to be filled with the previous word directly above it so the original file would end up looking like this.
smooth
smooth
tax-free
public
public
fair 1
fair 1
part-time
part-time
inland
inland
another
another
another
another
agricultural
cold
cold
cold
cold
cold
freezing
freezing
I would just do it by hand but seeing as how my spreadsheet has 60000+ entries it would be much nicer to let the computer do the work, right?!? Are there any formula experts out there who might be able to help me come up with one for this? Thanks in advance!!

You can do this using a simple formula.
To fill column B, for example, enter this in B2:
=B1
Click Accept, then drag the handle at the bottom right of B2 down to fill the rest of column B.
When you enter data in any cell in column B, the entered date will replace the formula in that cell, and the formulas in the cells below will copy the entered data into every cell below until blocked by the next cell filled with entered data.
Regards,
Barry

Have 2 or more fill in the blank on one slide

How is it possible to have 2 or more fill in the blank options in Captivate 8?
I have seen posts on here that link to now closed websites. If anyone could give some advice I would appreciate it hugely.
Thanks

Thanks for that I'm very thankful.
Do you know if its possible to create a GIFT file which allows an import of 2 FITB fields?

Structure is not getting filled in the subroutine

Hi Gurus,
I'm working on a Z-report ZMB52 for fetching Reserved Stock and showing it in a column.
The following code in a subroutine I've written for the same.
DATA: GS_RESB LIKE LINE OF GT_RESB.
    CLEAR: BESTAND.
    IF BESTAND[] IS NOT INITIAL.
      SELECT MATNR
             BDMNG
        FROM RESB
        INTO TABLE GT_RESB
        FOR ALL ENTRIES IN BESTAND[]
        WHERE MATNR EQ BESTAND-MATNR.
        IF SY-SUBRC EQ 0.
          SORT GT_RESB BY MATNR.
          LOOP AT BESTAND.
           READ TABLE GT_RESB INTO GS_RESB WITH KEY MATNR = BESTAND-MATNR. "BINARY SEARCH.
             IF SY-SUBRC EQ 0.
               MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
             ENDIF.
             CLEAR: BESTAND, GS_RESB.
          ENDLOOP.
        ENDIF.
     ENDIF.
When I debug, I can see that the structure GS_RESB is not getting filled through the READ TABLE statement. However, GT_RESB shows the data.
Could you please tell me where am I going wrong and a way to correct it?
Thanks in Advance!
Best Regards,
Ashutosh.

Hi Joshi
You can use
LOOP AT GT_RESB INTO GS_RESB WHERE MATNR = BESTAND-MATNR. "BINARY SEARCH.
              MODIFY BESTAND TRANSPORTING BDMNG WHERE MATNR = BESTAND-MATNR.
            CLEAR: BESTAND, GS_RESB.
ENDLOOP.
And please check in debug BESTAND-MATNR .
Best regards.

HT1438 dont i have to submit a slip before giving back in my ipod for fixing? what do i do? how do i fill in the form?

how do i fill in the form to give back my ipod and get a new one? whats the website i go to and what do i type in? can i change the color of my ipod from black to white?

Follow the instructions here:
Apple - Support - iPod - Service FAQ
I do not think you can change the color but you can ask.

Fill in the Blank Problem

Alright, I'm new to captivate and all that, but I have a slight problem with fill in the blank quizes that I can't seem to figure out. What I want to do is create fill in the blank quiz questions that already have an incorrect answer in the blank that, after a user attempts to answer the question, returns to the original incorrect answer. So, for instance, if I had a fill in the blank that read "(Cats) go woof woof" where the parentheses represent the blank, I would want 'Cats' to reappear after a user incorrectly filled in that blank. As it is, it seems to keep the user text. I've tried checking and unchecking the retain text button in options, but that doesn't seem to do it. Any help would be much appreciated.

Re-reading the question, I realize I may not being clear? I want the example text in a text entry box to re-appear after a user types in an answer and is given the failure or success message. Not possible? Thanks in advance.

I purchased my iMac used. When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it. Any ideas?

I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
RJ@

Try to connect on Live chat one more time.
Still not connected , better to contact Adobe Phone Support
Click on Phone option and check once :
Contact Customer Care

How can I make a fill-in-the-blank question with partial score?

I need to make an evaluation test with some questions. Some of them is a fill-in-the-blank question and it has to have partial score.
I have:
4 fields (text entry boxes) with: retain text, validate user input;
also checked include in quiz, with points, add to total and report answers;
an action that disables the 4 fields when the student is on review mode (otherwise it would be possible to change the answer after submitting the answers);
Problems:
I can't give feddback to the student: if i turn on success/failure captions the student will see them while answering, if i turn them off he wont know what's the right answer. I tried to use a shape to hide captions but the captions are always in front of the shape;
When reviewing the test something happens and the second time we see the results slide it assumes that the fields in the FIB question are empty;
Notes: it will be used in Moodle, as a scorm package
What can I do?

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

Created a 20 page fill-in the blank form with livecycle 8.0 and now page 20 needs updated.

Created a pdf with acrobat 8.0 and used livecycle 8.0 to create a fill in the form document. Now that I am at page 20, the lines i put in for a description for people who still use a typewriter should have been taken out for this document. Is there any way to replace this page with a revised pdf page. When I open the document in aapro and select document the insert page is not highlighted. I know I have deleted and inserted pages before, but not one that went into livecycle. Can it be done or do I have to start all over again?

Since this PDF is based on a LiveCycle Designer template individual pages cannot be removed. Can you not just go back into Designer and remove the page you don't want anymore and add in a new one?

I want to download an invoice template. How can I then fill in the template and place in a file?

I want to download a template of an invoice. How can I then fill in the template and create a separate file?

template in Word format? Excel? PDF? a little more information please.

No Fill In the Series

Similar Messages

Maybe you are looking for