No firmware and no contact with PC with zen visio

I wanted to upgrade firmware and followed an instruction that told me to rebuild firmware first and then install the firmware upgrade. The update program doesnt say it is docked - although it states docked in the Vision M screen.
Appreciate any helpMessage Edited by borge on 04-3-20070:50 PM

Ok, I am assuming that either pc suite is so buggy that no one has had a chance to emulate this or that no one has this issue other than me and everyone is synchronising their outlook contacts with their N70 and are still able to us voice Tags?
If anyone is experiencing this issue can they please let me know I am not the only person having this problem or preferably if anyone knows a fix please let me know so I can either ignore and forget ever using voice tags or allow me to use what would be a really useful feature?
I am beginning to think this may be like a Microsoft built in feature
Cheers, B

Similar Messages

  • How do I Sync Email with BES and Calendar-Contacts-Tasks-Notes with BDS?

    I have a Storm that I sync with our BES just for email and I want to sync my calendar, contacts, etc.. with the Blackberry Desktop Software.  First I was only able to sync my contacts... not my calendar.  Second, everytime I sync I lose my ability to send and receive email from my Storm and have to have our BES admin resend my service books to me so I can sebd abd receuve email again.
    Any thoughts or help would be appreciated.

    Did you install the desktop manager in blackberry enterprise or blackberry internet mode? I'm guessing it might be the latter, and it could be changing your servicebooks because of that... If it is installed for blackberry internet service, try removing it and installing it for blackberry enterprise service (this is a choice during installation).

  • Iphone 6 and ipad contacts not synching with icloud

    Hi,
    I've noticed that a few of my contacts on my ios devices have not synched with my contacts list in icloud. I've made sure icloud is the default contacts
    for both iphone 6 and 4th Gen ipad but they still dont show in the cloud. Any help would be appreciated, thanks.

    Hello rob5257,
    I'm sorry to hear you are having these issues with your iCloud Contacts. If certain contacts do not appear to be syncing correctly from your devices to iCloud, you may find the troubleshooting steps outlined in the following article helpful:
    Get help using iCloud Contacts - Apple Support
    Sincerely,
    - Brenden

  • I have a new iPad mini and my contacts are synching with each others information and pictures

    I am trying to set up a new iPad.  My contacts from Facebook are putting wrong picture and combining names

    Hi Hindie,
    If you are having issues syncing contacts on your new iPad Mini, you may want to double check how you have your contacts set to sync. The "Contacts" section of the following article should outline the process:
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Cheers,
    - Brenden

  • Icloud Calendar and icloud Contacts quit working with my Outlook

    Everything was working properly until this last week, then it just stopped.  I have an idea it may be related to ios6, but I don't know.  Trying to re-install iCloud control Panel on my PC was successful, but did not produce results.  anybody have any ideas?

    I solved it myself!
    Found that in "info" on the ipod sync page, "Sync Contacts....", "Sync Calendars..." and "Sync mail accounts...." had become unticked

  • Having trouble with my Creative Zen Visio

    I recently had a lot of computer trouble due to that fact that family members think they know what they're doing and delete things off of the computer that aren't supposed to be deleted. Today, I was forced to reinstall my operating system back to factory settings, so things that weren't working are working now. I have only one problem.
    I reinstalled my Vision M, and plugged in the USB cord, to find out that my computer no longer, (and for whatever reason,) detects my Vision M. Which is extremely annoying, seeing as I'd like to upload some songs to it sometime in the near future.
    Any help would be greatly appreciated.

    Creative Zen Xtra 40 GB
    purchased May 2005
    I have encountered similar problems with my Zen when overhauling or re-programming parts of my computer. The current firmware for your player requires the most recent drivers, Windows drivers, and Windows plug-ins in order to detect your player. I suggest you visit the Creative Downloads page for your player and make sure these programs have been properly installed on your computer.
    I currently use Mediasource Organizer as my principle program for manipulating and transferring content. However, I occasionally use Creative's older media organizer, Playcenter 3, and for this I require a specific Windows plug-in for my operating system. Once installed and the computer rebooted, I have no problems.
    Tally-ho
    d

  • Problems with second hand Zen visio

    Hi I recently sold a zen vision m 30gb, it was working fine when i sold it however i could not find the software that came with the player..... I checked the support page and everything seemed to be there that the buyer would need to get the player up and running...........however the buyer states the player is not charging and he cant get the software from the support page installed as there is no player already installed on his PC.
    How can we get the player to work on his PC without have the orginal software I've had a check and can't seem to find any answers using the search function.....please help this is driving me nuts

    What accessories went with it's If a wall charger was one of them good tell them to charge that way if not tell them that the charger for the playstation portable will work with it for charging. They should be using a REAR usb port to charge the player. Try a different usb cord. Buy a new dongle/power cord http://cgi.ebay.com/-ITEMS-ACCESSORY...dZp73.m53.l262 They do not really need the Creative software to use the player it will work with Windows Media Player
    Before they can do this function they MUST have 50% power of the battery:.......First have them boot player into recovery mode & do a Cleanup> Format>Reboot on the player & tell them I can't stress this point enough DO NOT CHOOSE RELOAD FIRMWARE!!!!!!! That function erases the firmware & will render the player useless.
    http://forums.creative.com/creativel...ap&thread.id=3 Check you private messages.

  • Problem with a new Zen Visio

    Hello :0I just got today my Zen Vision:M and I have a problem After using the player for few minutes the Touch Pad freeze... all the other keys are working, just the Touch Pad freezes.. I tried to reset and no change, I tried to Clean up and again not helping, I tried format.. firmware uninstall/upgrade.. no change.. Is there a solution for this problem or I will have to replace it's?Thanks,Matan

    jessevsm wrote:
    I got my Zen yesterday, and the player itself works great! And I've installed the software for it, and this is where my problem is. None of the software for it seems to be seeing that the player is connected to my computer. My computer recognizes it's there, and the player says it's docked. But yet when I access the Media Explorer or the other media programs that it came with, none of them recognized that it was there. And another problem that I've been having is it takes 'forever' to get into the Media explorer. I click on it from My Computer, and it takes a couple minutes just to get through. But then it still says that the player isn't connected. I've sent an e-mail to Creative talking about this problem. And I haven't gotten a response. I called earlier today and the person who I talked to said she was sending me a few things through email to fix the problem. But I never got that email for some reason, so now I'm coming here in hopes that someone may know how to fix this problem I'm having. I haven't been able to put any music or anything on my Zen because of the fact I can't get the software to work correctly.
    try to uninstall the softwares and install them again with full packages.

  • What online stores are compatable with the creative zen visio

    i just want to know what i can use to get my music and videos?

    For video, I'm not sure if there are any stores yet. I have vague memories of one or two reviews mentioning upcoming sites, so I would search through some of the old posts for review links. There was mention of the BBC providing programmes that would be in a suitable format, but that was a future project.
    I assume the Vision:M is MTP compatible, which means you can use subscription sites, depending on what's available in your country (this forum covers three large international regions). You can also of course use standard licensed WMA files.
    There's a great thread here on sites to get music from.

  • M.E Firmware And GBe ROM, Think I've messed something up.

    Hello there, I have the z77a-gd55 Motherboard and I updated my bios recently to the v1.11 bios. Now I didn't see the little warning on the bios download page. The one about not updating unless using a 22nm ivy bridge cpu and updated it.
    Problem is I have the intel core i7 2600K cpu, Which is sandy bridge.  After the ME firmware updated I noticed some weirdness going on with my LAN. I'm surprised it's even working if I have a sandy bridge CPU?
    I no longer have ipv6 connectivity. My router and isp supports ipv6 and this is what I used to use. But now it gets some weird garbage as an address for ipv6 so I have to have it disabled to have any internet connection at all. This lets my system default to ipv4 only i guess. But my dns server is tunneling the packets through torredo or something like that and it's reeeaally slow now. I have tried going back to the previous bios but the ME firmware wont go back to ME 7 i guess it was. And instead stays on 8.1.xxx I checked with MEinfo and my Lan GBe is 1.3. I'm pretty sure it used to be 1.5. I'm almost certain it has something to with my LAN having weird behavior now. Because after the Bios update and ME update windows re installed my lan and it had #2 next to it 
    Does anyone have any information on this? I have searched all over the internet to find a way to revert back to my old ME firmware but to no avail. I Also found something that could flash my GBe to ver 1.5? But I'm not sure if this is safe to do.
    Is it possible there is a bios somewhere that has the original ME firmware and GBe thing that shipped with this board? If so could i flash that? And get my old ME firmware back. Or am I a total fail and screwed up my board? 
    Edit: Forgot to post system specs..doh!
    CPU: I7 2600k
    RAM: 8GB Vengeance 1600hz
    HDD: OCZ SSD Agilty 3 120GB
    PSU: Corsair 800 watts
    SPU: X-Fi Titanium Fatal1ty
    MOBO: z77a-gd55
    Cooling: Corsair H80 all in one.
    Sorry about that.

    Quote from: Svet on 19-April-14, 05:00:25
    reflash by using this method: https://forum-en.msi.com/index.php?topic=163871.msg1267803#msg1267803
    Ok so you want me to flash using the forum flasher with bios E7751IMS.1B1 ==> E7751IMS.1B2 
    I just want to be sure.
    Sorry if I'm not allowed copy that information here.
    Update: Flashed the bios linked to me by svet. Flash proccess scared me at first because it said Region does not exist in YELLOW. But i held my face in my hands because i couldn't stop it and it WORKED. Windows yet again reinstalled my LAN But this time i have ipv6 connectivity back! My internet connected works flawlessly once again.
    So thank you Svet and the Msi forums! I won't ever be messing with my bios again!

  • Centro will not sync with Palm desktop - Calendar and/or Contacts

    I have used a Palm device for many years. Acquired a new Centro. Upon installation of Palm Desktop (on Windows XP) that came with Centro, all contacts, calendar, to do, memos, etc transferred to the Centro during installation. 
    Subsequent changes to contacts and/or calendar on Centro are not syncing with Palm desktop when Hot Sync is performed. Hot Sync starts and appears to complete normally. To Do list and memos appear to sync just fine. Have tried changing conduits to have Centro overwrite desktop. Have uninstalled/reinstalled Desktop many times.
    Hot Sync log:
    HotSync operation started for Daniel M. Key on 07/02/08 13:35:13
    OK Quick Install
    OK VersaMail
    OK Memos
    OK Media
    OK Tasks
    -- Backing up MultiMail BData to C:\Palm\MD\Backup\MultiMail_BData.PDB
    -- Backing up PmTraceDatabase to C:\Palm\MD\Backup\PmTraceDatabase.PDB
    -- Backing up HxSyncRegistry to C:\Palm\MD\Backup\HxSyncRegistry.PDB
    -- Backing up Saved Preferences to C:\Palm\MD\Backup\Saved_Preferences.PRC
    OK Backup
    HotSync operation completed on 07/02/08 13:35:19
    Please help. Thx.
    Post relates to: Centro (Sprint)

    I have a Centro/Verizon Wireless using Versamail with accounts established for personal POP and Exchange e-mail synchronization.  The latter account is for work.  Previously I owned a Treo 650p using Versamail. 
    When I first installed Palm OS Desktop and synched to my Centro device, it was on a Windows XP home computer, and no Versamail accounts were defined.  First I downloaded and installed the Versamail version which allowed Exchange synchronization.  I exported the Treo650p contacts list to a disk file, and imported it onto the Windows XP home computer into the Palm OS Desktop installed with the Centro-supplied CD.  This synched the imported contacts list to the Centro fine.  After I defined all the POP and Exchange accounts, synchronization with the office Exchange contacts list worked fine, and still does.  Synchronization with the windows XP home computer for contacts seems to still be ok, too regardless of the MS Exchange Versamail account commingling with my personal POP accounts.  Maybe the install sequence is overriding the previous posts' notation that MS Exchange mail definition will override synch with Palm OS Desktop?
    The problem now is I have a different/second home computer that's Vista os.  I installed the Palm OS Desktop and synch with the Treo.  The contacts list is not synching to this second home computer, maybe because I didn't follow the exact same sequence as for the Windows XP pc?  I can still synch my Centro with my Windows XP pc and that includes contacts.
    Is there a way on this second pc to override the MS Exchange contacts override for synchronization without having to go through the exact same install sequence as occurred on the Windows XP machine?
    Post relates to: Centro (Verizon)

  • Face time fades out and then tries to reconnect on new ipad retina display on WiFi.  Iphone 4s has no problem with face time from exact same location and same contact.  WiFi signal strong on both devices.  What gives?

    Face time fades out and then retries to connect (new Ipad Retina Display) on WiFi. Iphone 4s has no problem with face time from same location and same contact.  What gives?

    rdallas001 wrote:
    Is the router to small?
    Not necessarily, if you are using Facetime all the data goes through your WiFi router, your cable/DSL modem, your ISP and the internet to Apple's Facetime servers and then, in reverse, down to the Facetime recipient. If your ISP connection is too slow or there is excessive traffic on the internet you can have Facetime problems.
    Most WiFi routers can handle this unless others in the house are also using WiFi at the same time. The problem may be your ISP connection or congestion on the internet, etc.

  • I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

    I updated iOS 7 and my contacts were ok then they suddenly disappeared a few weeks after updating. I have no idea if it has anything to do with iOS 7 but when I email someone the contacts are there. When I open the app they are gone. What happened?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i c

    I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten

    1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
    2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi.

  • Hello apple guys, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

    hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

    So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac".  I really, really miss Steve Jobs!

Maybe you are looking for