No flexibility to use diff RFX templates during the RFQ-- RFx integration?

Hi,
I know for a fact that we can only use one RFx template during the RFQ --> RFx process integration. This RFx template is tied to the Integration Configuration Document.
Current customer has different Group functions such as Nuclear, Corp etc. Document security templates on RFx events need to be set such that an RFx created by a user in Nuclear Group function should not be visible to users in Corp.
This can be realised using Document security templates defined by Doc Type. But the issue is that RFQ's created in ECC can only use this one RFx Template associated to a specific type.
Are there any plans in future releases to make this more flexible and not tie all the RFQ's to a single RFx template?
Due to this restriction additional scripts need to be written to ensure code of conduct in the Sourcing app.
Thanks
Rach

Hi Rachith,
Great to catch you back in the forum
Just fyi, choice of templates during RFQ replication is supported starting in Wave 9, which is yet to be releassed. Configuration requirments to do this will be available with Wave 9 documentation.
In releases prior to Wave 9, adding a template node in the xml might not be of help, unless some code downport happens.
Thanks,
Baski

Similar Messages

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

I use my MacBookPro sporadically during the day. Should I shut it down or put it to sleep during the day?

I use my MacBookPro sporadically during the day. Should I shut it off after each use or put it to sleep?

You will get various answers to this type of question. Everyone has their preferences. Read the user manual that came w/your MBP for sleep & shut down recommendations.

How can I use an older template on the latest version of Pages?

Hi,
I just got my first Mac laptop/computer, a Macbook Pro. One of the things I wanted to use my Mac for was to create a newspaper. This newspaper has a template
like this: galleio.png
I am wondering if there is any way to get this on the newest version of Pages?
Thank you in advance

So what format is it in now?
If it is in Pages '09, be prepared to to lose features and formatting by converting it to Pages 5 format.
Do you have Pages '09? If so why not continue to use it, there is nothing to be gained by downgrading to Pages 5.
Peter

Episode 2: Flexible Layouts Using Adobe Edge Animate and the Edge Commons Library | Create Like Crazy with Adobe Edge | Adobe TV

With Adobe Edge Animate you can create flexible layouts easily. In this lesson you will learn how to use percentage values, alignment and several other layout presets to build flexible layouts that look great across all screens. You will also learn how to create different adaptive layouts for specific screen sizes using the Edge Commons library.
http://adobe.ly/QnCdXY

No ADOBE TV videos play. Not in the latest Firefox nor IE. The play icon appears - I click it - and the frame remains black -- no error message, nothing. I even tried accepting 3rd party cookies- nothing. I can play videos fine from othe sites, youtube .... etc ....

How can I use "write to spreadsheet" during the data is taking but not the end of all the loops

Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KL

KL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett

Lsmw Error during the specify files

While doing Material master upload thru lsmw...using Batch input method
During the specify files step i am getting this error
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Pls Guide me.......

Hi,
How you save your source file? Need to be saved in as TAB delimited file
OK. Check link:
http://www.sap123.com/a/98/#loading-material-masters-with-lsmw-direct-input-method
http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench
Regards,
Biju K

Really slow speeds during the daytime?

So i've been with BT for as long as i can remember (Broadband Option 3) and for as long as i remember it's never been that great. Not bad, but not great. Apparently i should be getting up to 8mbps but i was normally around 3mbps, which was never slow enough to bother complaining about. But in the last 2 weeks for some reason im getting extremely slow speeds during the day. From 1pm - 1am i've have around a 1mbps (if im lucky), and from 1am - pm i'll have 5 - 6mbps (which is faster than normal). Im really not sure what's going on, but it makes it impossible to do anything other than use text based websites during the day, which is a pain. Im about 250 metres away from my local exchance so i don't see why im getting 1mbps all day.
Also the wireless connection in my house is awful. My laptop that's 2 ft away from my router (BT Homehub 1 or maybe 1.5 im not sure) and it's getting a 2/5 bar signla strength. I could connect to my neighbours wifi and have a stronger signal. Addmitiedly the Home Hub is pretty wore down, so would getting the Home Hub 4 improve the wireless connection or the speeds problems? Is there any way to get it without paying £60? I mean i could switch to sky broadband, get a new router, and get a years worth of broadband for cheaper than that. The only thing keeping me with BT right now is BT sports, and i can't even any BPL games on that anymore since my connection is too slow when the games are on.
Here's the current speed (9:30 PM) http://www.speedtest.net/result/3704808533.png
I'll post the updated speed at around 2am and see how much better it is. Also any other tests/information you guys might need. Thanks.

welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

TestStand crashes if I'm using "Diff Sequence Files"

If I am using "Diff Sequence Files", TestStand (2.0.1f1) immeadetly closes without any messages, and I've to restart TestStand again.
Same happens rarely if I run my TestStand application (e.g. after testing 75 UUT's). I've got this bug by using the Secuence editor as well by using an operator interface.
Win XP, Nt4, LabView 6i
Any ideas how to fix that, or how to debug if everything is closed.
Thanks for any hints,
martin

Alejandro,
this problem happens with different sequence files. Sometimes the System Exception �System Exception Error Code: -17502� is shown.
But there are also files where I haven�t any problem by using �Diff Sequence Files�. For your information: all files have the same structure.
Attached you�ll find the 2 files where the problem occurs every time without an Error Code.
But the other serious problems are the crashes while running the TestStand application. That means during the test the TestStand application would close without any messages. And this problem occurs very rarely and I�ve haven�t got a chance to debug.
Any hints will be appreciated
Best regards
Martin
Attachments:
1230-2101_0006.seq ‏178 KB
1230-2201_0006.seq ‏178 KB

GarageBand '09 Slow and Beachball when using "Example Ringtone" Template

I'm pretty sure this is just an Apple bug that will need to be squashed at some point, but I'd welcome some other thoughts or advice on this repeatable situation.
Situation:
When launching Garageband all is well until I choose the iPhone Ringtone from the left AND select "Example Ringtone" from the main panel. This bug does NOT occur with either "loop" or "voice" ringtone types or with any other project type (Piano, Electric Guitar, etc)
However, if I select iPhone Ringtone AND "Example Ringtone," I get a beach-ball for a good 2-3 minutes during which my external drives are thrashing.
I have two externals a MyBook USB 500GB for Time Machine and a LaCie 1TB FW800 for other stuff.
If I disconnect the MyBook and perform the same tasks, GarageBand beach-balls for less than a minute...still obviously something wrong there, but better. If I disconnect all external drives, then GarageBand beach-balls for maybe 5 seconds under the exact same conditions. The presence of these external drives is triggering this GarageBand bug!!
I also have iLife 09 on my Unibody MacBook with no external drives and under the same test condiditons, Garageband takes about the same 5 seconds to load the Example Ringtone template.
Soooo, for some inexplicable reason, Garageband is causing massive reads from my external drives making this template pretty much unusable.
Is anyone else having this problem with this particular template and external drives? Can anyone else reproduce if they haven't had the opportunity to try this before now?
Am I missing anything?
Thoughts?

Well, hopefully this new information will be helpful if anyone else runs into this issue. At least until Apple gets a fix in.
The bugged template is called 01. Example Ringtone and is located in the
\Macintosh HD\Library\Application Support\GarageBand\Template\Ringtone folder
Interestingly enough, these templates, according to command info were actually created in GB4, no idea if that is part of the problem.
Anyway, I tried swapping out the template mentioned above with one of the same name that I created and the bug went away.
My steps were as follows:
1) Launch GB and select the Example Ringtone template...wait a long time until GB eventually stops beach-balling
2) GB automatically saves this template under a new name. Usually My Song# and places it in the GarageBand folder of your user directory
3) Rename the file from #2 above to 04 iPhone Ringtone.band and place in the template folder mentioned above
4) When making future ringtones, use the 04 template rather than the 01 provided by Apple until they get it fixed.
Note, you could just replace the Apple provided template rather than adding a new one, but I opted for this approach so I could check after software updates to see if the original problem had been fixed.
I'm still open to the idea that I might have this all wrong, but the evidence seems pretty compelling.
Use Apple's template and 3 minute beach ball. Replace it a near duplicate and the problem goes away.
Hope this helps and if anyone from Apple happens to fly through it would be great to hear about this.

Why am I being charged data usage during the times my phone is not being used?

I got a notice on my phone that my number has used all of its allowed data usage for the month. I looked at my current usage and seen that I was being charged for data usage during the times that I am not using my phone. I figured it up and it adds up to be more than the amount that you say I am over. Explain please.

Ok, what all should I turn off on my 5s and I should get any additional fees waived. I just got this new phone about a week before Thanksgiving and never got a notice till it was full. I have never went over before. I also have never been told that I could be charged data even if I am not using my phone and I should make these changes to prevent this.
Also, the phone was 2 days late getting to me. So in addition to any additional fees that I may occur from the overage I should get a credit for the delay in my phone being sent. Oh, and it probably would have been longer had I not called to see where it was at, which the guy that helped me put in the order and was to follow up the next day with a phone call to let me know what the status was and never did.

I keep trying to load an iphoto book and it keeps getting stuck on a page during the assembly. I am using iphoto 11. What can i do to get this book assembled

Hi
I have now tried to load this book twice. The first time it got stuck during the assembly process on page 6 of 66. The second time it got stuck on page 7 of 66. I've done a preview and it assembles fine. Any ideas would be awesome
thanks

I have now tried to load this book twice
By load do you mean order? It appears that there may be a damaged image on page 6 or 7.
Export all of the photos on those two pages to the desktop as Kind = Originals. Open each with Preview and save as a new jpeg file. Import lthose new files into iPhoto, add them to the book and use them to replace the existing photos in those two pages. Now try ordering again.
HOWEWVER, you might try this first: boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try to order from there. Keep the pdf Preview files you've created to compare with the printed copy when it arrives.
OT

How can I modify column width in a spreadsheet report without using an Excel template

I currently use the LabVIEW Report Generation toolkit in LabVIEW 2011SP1 to create simple spreadsheet reports that I can build/print without having Microsoft Office products installed. I really like being able to do this, and it allows me to generate nice on-demand data reports - I'm also not tied to having Office installed on the system I'm using, so this works on just about any test fixture I can install the software on.
I recently have a requirement that I must have variable-length columns in my report. I currently use the VI "Append Text Table to Report" in order to create a text table, but the column width requirement is that all columns must be equal width UNLESS I use an Excel Template file to define my column widths.
My questions are:
Is it possible to create a text table and define per-column widths without using an Excel Template? If so, how? My report mainly has a lot of small numerical values for the columns, but some columns contain system names or status messages - I really hate the longer text blocks wrapping and taking up so much real-estate when if I could control the column widths I can get all my data on a single line.
I'll admit I haven't tried this myself yet, but if I use an Excel Template will that require me to have Excel installed on the PC in order to print/generate reports?
Is there a recommended way (with an example) of generating a text table in a report with or without using the "Append Text Table to Report" VI that allows me to have custom column widths that doesn't require me to manually build a custom print page? If I do have to create a custom print page, what would be the most straightforward approach?
Thanks!
-Danny

Sure, I'll provide a pared down example that demonstrates my use-case:
I have a control to the VI that takes in a 2D array of strings representing the data I want printed in a table. I am generating a standard report, adding a table to the report, and printing it. The first VI is "New Report.vi", the second VI is "Append Table to Report.vi", and the third is "Print Report.vi", all found standard in the Report Generation palette.
Note that the "Append Table to Report.vi" has an input parameter "Column Width" with a default value of (1). This input parameter is a single input parameter, which defines the column widths of ALL the columns in my table - hence, with the VI the way it is, all my columns will be 1 inch wide.
I find myself needing to be able to define per-column widths, not just a single global column width parameter.
The only way I have found to do this is by using an Excel template file. The "New Report.vi" takes in a "template" parameter, and if used, the report generation toolkit can be set to ignore the "Column Width" input parameter on the "Append Table to Report.vi" by setting the width value to -1. Instead it will launch Excel, open the template file provided, build the table using the template, will close Excel, and will attach the generated table to the report. However, I have a strict requirement that Microsoft Office NOT be required to be installed on the computer.
So, without using Excel, is there a way to generate a table in a report and define the width of each column individually?
-Danny

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

How to Use separate web template to a query, when default one is configured

Hi,
A default template is configured in SPRO. and all the queries display data using this template. Now I want to display a particular query result in a separed template that is customised to suit the need.
how can I achieve it? When I customise template and attach query to it, it displays the result in this template, when executed from WAD. If I execute from Bex, The result is automatically displayed in the default template mensioned in SPRO.
Please advise.

If you want this template to be attached to this query alone - then you will have to have the same as a separate iView on portal.. when you execute from BEx the default template will get executed and by changing the default template all the queries will start using the default template... it is not possible for you to specify the template to be used when executing queries from BEx Query designer..

No flexibility to use diff RFX templates during the RFQ-- RFx integration?

Similar Messages

Maybe you are looking for