No FN keys on Satellite A200 after Vista Business installation

Hello,
i have problems with my Satellite A200. I bought it wiht a installed Windows Vista Home Premium. There was a bar on the top when i pressed a FN combination.
I haved installed Windows Vista Business but i don't found the tool/driver for the bar.
THX

thanks for your support i haved fixed the problem :)
but i have another question/problem. the icon of the speaker regulator do not popup on my display when i regulate the volume. can you help me there too?
excused my bad english
i hope you understand me :)

Similar Messages

  • Cannot use webcam with any chat programs - Satellite A200-AH7 Vista

    Satellite A200-AH7/Vista Home Premim/Chicony 2.0 USB built in webcam
    I can't seem to figure out how to get the audio working with the built in chicony webcam when in a chat program, or any program for that matter. I can record audio and playback later, but this is not what I want to do. It's probably just something silly I am missing..but any help sure would be appreciated...I have tried with Windows Live and Yahoo messenger and so far all I can do is wave at people LOL. I have never been able to make it work...any ideas?
    Today I have purchased a Logitech Quickcam for notebooks in case the problem is with the built in camera. I don't want to install it unless absolutely necessary and believe that I would need to uninstall the Chicony to make it work...can anyone point me in the right direction?
    I just want to be able to talk to my grandkids.....
    Thanks in advance,
    Sue

    Hi
    This is a Toshiba Canadian notebook model.
    You have to check the Toshiba Canadian website to get the right webcam software:
    http://209.167.114.38/support/TechSupport/ln_TechSupport.asp
    Remove firstly the old webcam software. Reboot the notebook. Clean the registry and system using the CCleaner (its free). Reboot the notebook again an then install the new webcam software!
    Greets

  • Dual boot on Satellite A200 with Vista-XP?

    Computer details: *Satellite A200-PSAE6E...*
    The laptop came with Vista...I managed to install Windows XP (with new drivers etc...) and it' s working just fine *BUT* after reboot, even Acronis OSS doesn't recognize Vista anymore, and the computer boots directly to Win XP only. (I need both OS...)
    I'm searching many hours now instructions for *dual boot*, but everyone takes for granted that I have an Installation DVD for Vista... I don't!!!
    Toshiba came only with the Product Recovery CD, so all the instructions about MBR and the solutions that even Microsoft gives me (E:\boot\bootsect.exe /nt60 All........) it's useless!
    Is there anybody out there???
    Please....if you can give me any hint at all it would be.... just a miracle...thanx

    Hi,
    This isn't direct with your problem - but I was wondering if you would be able to help me? As like you I have just brought the same laptop, and there was no installation disk just the restore disk?! I am trying to open some applications in PowerPoint but it keeps asking for the product key, although I have put this in as it is on the base of the laptop, it is still stating it is wrong?!
    Have you had any problems with PowerPoint?
    Thanks
    Yvette

  • Re: Satellite A200 - After Win7 installation SD card reader doesnt work

    Hello,
    I have installed Windows 7 on my Satellite A200 and now cannot find my SD card reader.
    Where can I find the driver for that?
    I did not find it in the download section from Toshiba.
    Rob.

    Hi
    The drivers for SD card reader is called Flash Media Driver.
    The Flash Media Driver is for your Bridge Media Slot. This slot lets you insert either a SD card, Memory Stick (Pro) or xD picture card.
    If such driver is not available for Win 7 then you should take the one released for Win Vista.
    Cheers

  • Audigy 2 ZS Video Editor & Vista Business installation iss

    So this is my letter to?Creative who have yet to respond, does anyone have a similar set up to me who can shed some light on this issue and fixing it. Having no sound and not being able to listen to itunes is not a good thing.
    To Engineers,
    Firstly id like to say I?m very disappointed in purchasing this $400 AUS SB Audigy 2 after looking on your website and seeing the Microsoft vista logo plastered everywhere thinking this device would be compatible, quite clearly it is not as I have installed/uninstalled drivers and disks..only to find that it is pointless..
    So here I am about to explain my situation in order for you guys to find me a suitable driver ASAP.
    I currently have a HP M777A running on Microsoft Vista Business with 3.06GHz and 2x GB Kingston Memory..
    In my office I have a 5. speaker surround which sits with my 9?LCD which I like to listen to music from and watch DVD?s.
    In my lounge room I have a 42? LG Plasma Display which also runs with my Denon AV4306 Recei'ver which also have a 5x speakers surround.
    Prior to Vista, I was able to watch DVD?s or listen to music through iTunes which was being powered through my PC, I was able to do this simultaneously in both rooms. This is what I need to achieve again very soon.
    After scouring dozens of websites and reading this products pitch lines which states that this virtually anything can be played through it, well this is why I bought it.. But I?m very disappointed.
    My question to you guys is this.
    . Is there a driver or something I can load up to fix my problem
    2. ?If NOT, then how long will it take to be released.
    3. ?If so, how do I find out about it when it is released.
    4. Etc etc.
    Please advise ASAP with a solution I can work with.

    Copied from the Video forum - (related to video operation under Vista)
    I have used the follwoing procedure to install a working configuration of the Audigy 2 ZS Video Editor in a clean install of Vista Ultimate.
    () Download from Creative Labs (US) site: http://us.creative.com/support/downloads/ the following files:
    (a) Creative Sound Blaster USB Series Windows Vista Driver .00.0060 - USBVS_PCDRV_LB__00_0060.exe (from the Vista section)
    (b) VidCap for Creative Sound Blaster Audigy 2 ZS Video Editor .00.000 - A2VX_PCVDE_L9__00_000.exe (from the WinXP section)
    (2) Use WinZip or WinRAR to open the file (b) and extract the folders \DrvInst and \Vidcap into your Vista Downloads folder.
    (3) Connect the Video Editor to the power supply and a video source; connect the USB cable to your PC. Ignore the "Found NEw Hardware" dialog that pops up.
    (4) Doubleclick on file (a) to install the Creative Sound Blaster USB Series Windows Vista Driver, and follow prompts as required; accept all defaults. After install is complete, let the PC reboot.
    (5) After rebooting, in the "Found New Hardware" dialog that appears, select the options to search for a driver, don't go online to search, browse for a driver and point the search at the \DrvInst folder you extracted in (2) above. The USB video driver will be installed from the \DrvInst\Video\Driver\Win2k.
    (6) After the video driver is installed, doubleclick on the Setup.exe file in the \Vidcap folder you extracted in (2) above to install the Vidcap application.
    (7) Setup the options in Vidcap, and run a test recording.
    Happy capturing under Vista.Message Edited by Dale-CL on 04-8-2007 :3 AM

  • Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

    I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
    I was not able to move my mouse arrow at all.
    I had to purchase a wireless mouse so I could use my laptop.
    When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
    I have a satellite l305d-s5881
    thanks for your help

    Hi mate
    The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
    You will need to visit the Toshiba US driver page in order to get all drivers.
    To get the touchpad working, you will need to install the Touchpad driver.
    Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
    You need to install both; firstly VAP and then Flash Cards.
    Here is the Toshiba US page:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    Greets

  • Re: Satellite A200 (PSAE6E) Vista/7 64-bit flash cards

    I would like to know if such a thing is available... since I didnt find it anywhere
    and also availability of drivers for 64-bit Windows 7, since most manufacturers already have drivers but Toshiba doesnt.

    >...since I didnt find it anywhere
    It is strange. On Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads you can find drivers for Vista 64-bit.
    Windows 7 is still in beta phase and still not available on the market. So support is still not started for it. To be honest I don't believe some other notebook manufacturers have started with Windows 7 support.

  • Satellite A200 - some Vista drivers do not install

    Some drivers do not install software, why? Drivers are listed on Toshiba alerts.
    Thak you

    Can you please be so nice and explain your problem using more than one sentence?
    Which drivers make problems?

  • Graphic Driver on Satellite Pro U200 (Vista Business 32bit CZECH)

    I experience two problems with my gfx driver.
    1) When recovering from Standby, the display goes to 1024x768 instead of going back to 1280x800
    2) When playing Lineage 2, the game crashes to Desktop and I get the error message "Display driver igfx stopped responding and was recovered". After googling a little, i figured out a new display driver for my Intel 945GM Express would resolve the problem. So I downloaded the proper driver from intel.com but I can't install it. I'm getting an error message saying "Installed driver is not verified for this computer. Ask the computer manufacturer for the appropriate driver." So I went to the toshiba website and I've downloaded the appropriate driver from there (well, the one on toshiba.com is not the latest, intel.com has a newer one). But when I tried to install it, I got the message that my computer does not meet the minimum requirements for the installation! What does this mean?! I've read the readme file and my laptop definitely meets the requirements, besides the driver I've downloaded has to be working for the Satellite Pro U200, because I've entered all the needed info for downloading the driver.
    So can someone please solve my problem? And if not, is there a toshiba support hotline or something where i can call?

    1st: Download the latest driver from the iNTEL-Page.
    2nd: !UNINSTALL! the old one, under Add/remove Programs.
    3rd: Reboot.
    4th: Install the new driver.
    5th: Reboot.
    6th: Pray ;)
    Good Luck. The error comes only when you try to install a new driver over another old one (which is from Toshiba). But Toshiba is never up-to-date when it comes to drivers, so better look for wireless, display and chipset always on the intel page!

  • Satellite A300 - After Windows 7 installation how to get factory sate back?

    I have recently installed windows 7 on my laptop and now I want to remove them and restore my computer to its factory state.
    When I enter the "advanced boot menu" I select "repair my computer", then there is a menu from which I select "repair...something". Then it shows up a message which says that there is nothing wrong with my computer and that's where all end.
    Any ideas???
    Thank you

    Hi
    Did you not create the Toshiba recovery disk as yet?
    I think you didnt read the user manual because there you can also find a lot of informations about this.
    The Toshiba recovery disk you can burn using the Toshiba recovery disk creator. This tool is preinstalled on every Toshiba notebook but on another OS like Windows 7 its not possible.
    Normally after the first start when you bought the notebook you get the following message (recovery reminder):
    +Important INFORMATION+
    +your system is equipped with hard disk recovery system. if you need to repair+
    +your computer by restoring it to original factory state, you can do it directly+
    +from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
    +and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
    +Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
    +hat you are able to restore your computer to the original factory installed state, even if your computer+
    +gets seriously damaged+
    However, now its too late and you have to order a new recovery disk from Toshiba directly:
    https://backupmedia.toshiba.eu/landing.aspx
    Bye

  • No led lights after Vista Ultimate installation

    Hi all
    just installed Vista ultimate on my laptop and now the led lights on the keyboard don't light up
    Any ideas as to why??

    Dear Claire
    Have you installed all drivers and Toshiba tools and utilities for your notebook model?

  • Satellite PRO S300M-EZ2401 Recovery Disc---Vista Business or XP SP3

    I bought this second hand with a Microsoft XP Service Pack 3 Recovery Disc (XP OS). It is Windows Vista Enabled with licensed sticker at the bottom which I assume is a Vista Business CD key. If I order a recovery disc for this model, will I get the one with a vista business installer so I can use the CD key at the bottom? I have read in one of the messages in the forum that a retail version installer will not recognize the CD key found at the bottom of this laptop as this is an OEM. confused confused. I thought I can just get a vista business installer and put in the cd key.

    Satellite Pro S300M-EZ2401
    Since the specs above say it comes with Windows Vista Business (32/64-bit version), SP1, then I think it's fair to infer that's what the recovery discs will contain.
    The package may also include the downgrade media mentioned there.
    In any case, the key on the bottom is irrelevant. Whichever Windows becomes available when you restore from  recovery discs is pre-activated. There is no activation required.
    -Jerry

  • Windows vista  business 64-bit -  google chrome - iTune

    Is there something specifik with this combination. For to be able download sportsites (Worldsuperbike/Motogp) to my staionary computer Hp Workstation 4600..Or just download the lateast version?

    Hi:
    It doesn't look like you can get the disks from HP anymore.
    You can still get them from this non-HP vendor at the link below.
    http://www.computersurgeons.com/p-16921-recovery-kit-533108-zh3-for-hp-model-number-s5150t.aspx
    If you can still read all 25 characters of the Vista Business product key on the COA sticker on your PC's case, and you like a challenge, you can make your own plain Vista Business installation media by reading the info at the link below.
    You'll be able to save $30+ bucks if you can.
    http://dellwindowsreinstallationguide.com/download-microsoft-windows-and-office/download-microsoft-w...

  • Installing Vista Business

    I'm trying to install Vista Business on my MacBook Pro and can't seem to get past the first step of the Vista Business installation. After clicking on Install Now it shows me my partitions I then select the partition BootCamp created, and it won;t allow me to go any further and then scans for a drivers disc??? What am I supposed to do?

    After selecting the Boot Camp partition did you select the format option towards the bottom of the same screen. Boot Camp makes a FAT32 partition. You will need to use the windows installer to convert this to a NTFS drive before you can proceed further.
    Hope this helps.

  • HP Windows Vista Business 64 bit recovery discs

    I am looking to get recovery cd for my HP windows vista business 64 bit system. I am unable to boot in safe mode to do system restore.  

    Hi:
    It doesn't look like you can get the disks from HP anymore.
    You can still get them from this non-HP vendor at the link below.
    http://www.computersurgeons.com/p-16921-recovery-kit-533108-zh3-for-hp-model-number-s5150t.aspx
    If you can still read all 25 characters of the Vista Business product key on the COA sticker on your PC's case, and you like a challenge, you can make your own plain Vista Business installation media by reading the info at the link below.
    You'll be able to save $30+ bucks if you can.
    http://dellwindowsreinstallationguide.com/download-microsoft-windows-and-office/download-microsoft-w...

Maybe you are looking for