No folders on my iPad post migration
I followed all the instructions, checked I was IMAP, but my iPad 2 (IOS 8.0.0) doesn't show any of my folders except Inbox, Sent and Trashed (and the latter two are just those sent and trashed since the change). I looked at the checks and noticed that SSL encryption was set to off and also the port number was 587 so I switched SSL on and changed the port number to 465 as instructed but still no joy. Everything's still fine when I look at my e-mail through a web browser (Firefox and Safari), the problem is just when I use the mail app on the iPad.
Any suggestions please? Thanks
Delete the account and restart the iphone.
Set the email account up manually (Other) . Do not use the wizard.
Set it up as an IMAP account.
Server incoming and out going: mail.btinternet.com
Email user name: (Normally you only need the prefix of your email address but some users have found the need to enter their full email address.ie [email protected])
Password: Your BT email password. (if you have changed it recently, try the old one if new one doesn't work)
Log on using clear text authentication
Out Going Server (Use same as incoming mail server.)
Outgoing Port : 465 SSL security
Incoming Port : 993 SSL security
Similar Messages
-
On my computer I have folders in my email accounts but they are not on my iPad when I go into mail how do I get my folders in my iPad?
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/offerOptOut
-
Is there a way to create folders on one iPad and sync the folders to multiple iPads?
Is there a way to create folders on one iPad and sync the folders to multiple iPads? I have 23 iPads and I want to have all the folders match for easier access for students.
Here is a possibkle workaround, assuming the iPads are all starting out with the same initial content on them:
Backup that iPad to each computer you will be using. Then restore from the backup (only takes a couple minutes). Then rename the other 22 iPads. -
how do i download 15 photo folders to my ipad. it only lets me download one. if i try download another folder, it deletes the previous folder.
You need to select and sync them in one go. Photos that you sync from your computer can't be deleted directly in the Photos app, instead they are deleted by not including them in the next photo sync - so you've effectively been telling iTunes to replace the folder that you've just synced with a new folder
-
How do I create photo folders in my iPad
How do I create photo folders in my IPad ?
You have to create the folders on your iMac first, then sync with your iPad using iTunes. Then, the folders show up as albums on the iPad.
-
Why do I have 2 Trash Folders on my iPad Air Mail
Why do I have 2 Trash Folders on my iPad Air Mail. Incoming Mail is often sent to First Trasg Folder {i.e. Not the one with picture.
How can I get rid of First Trash Folder?I have the same issue so I end up with same entry twice. :-(
-
BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina JoshiHi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
-- Hardware Sizing
-- Preparation of Data Centres
-- HANA Hardware preparation
-- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
-- House Keeping activities on BW system (data clean up, etc)
Post Installation:
-- Sanity checks / Preparation and License checks
-- JAVA Configurations
-- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
-- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
- ZBW_HANA_COCKPIT Tool
- ZBW_HANA_CHECKLIST Tool
- ZBW_ABAP_ANALYZER Tool
- ZBW_TRANSFORM_FINDER Tool
- SIZING Report
- System Clean up Activities
- Impact of 7.4 on source system checks
- Java Upgrade for portal
# DMO Stages
- Preparation & Pre Migration checks
- Execution / Migration
- Post Migration Activities
# Testing Phase
- Source system checks/Activities
- System and Integration Testing
- End to End Testing
- Performance testing
- Reports
- BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren -
Hi,
We are facing issues post migration issue in 11.1.1.1.5.
We are using JMS adapter with 3rd party Queues (IBM MQ). We are able to produce and consume the messages in 11.1.1.1.3. But, post migration to 11.1.1.1.5, we are able to only prouce the messages and not able to consume the same.
We use JMS message id as Correlation id.
Please assist us on this.
Thanks!and not able to consume the same.Do you see any error in log? Paste the error info here. Alternatively, you may log a SR with support.
Regards,
Anuj -
JET/DAO 3146 error on post migration
I had a urgent issue that held their development. I would appreciate if someone can help me on this.
I was trying to migrate access 97 database to Oracle database. Here is environment,
Access97
Oracle 8163
Microsoft ODBC for Access 4.00440302
Oracle ODBC for Oracle 81700
I had a problem in the post migration when WorkBench tried to update Access Database (to create the global link or
something like that). It failed with an ODBC error: JET/DAO error code: 3146, description: ODBC--call failed.
Does anyone know what does it mean on this error and what could have caused this?We are currently looking into this issue. Looks as though it may be related to Office 2000.
-
Can u make folders in the ipad app?
Can u make folders in the ipad app?
Yes, you can make folders.
Tap Documents in the left hand column
Navigate to where you want to make the folder
Choose "Edit" in the top right toolbar
Tap the icon that is a Folder with a Plus sign on it -
Transfer ID appeared to be successful, with the target taking over the name and IP of the source server. But after some problems and lots of hair pulling, I discovered that none of the OES services in Yast picked up the source IP. They still had the premigration target server IP. I've reset, but am still having problems with the cluster service. Is there anywhere else I need to check for the old IP? Thanks.
You may want to open an SR with Novell since you had problems with the post migration not changing the server name as well before.
I've not had it happen to me, but that doesn't mean it's not a bug somewhere.
Novell will probably want a supportconfig and the entire project directory log files as that'll contain the results of the changeip scripts and whatnot.
Perhaps you found a bug or there's something unique to your environment that's causing things to not work properly. -
TS3274 How can I access email in My Folders on my iPad?
I have assigned some email to a folder in My Folders. On my computer I can open the folders but I don't know how to do that on my iPad. Anybody know how that's done?
Unless your email account is an IMAP account, you cannot access or create folders on the iPad built in mail app. The folders that you created in the mail client on your computer, are for local storage and organization in that mail client. Those will not sync to the iPad and they are not accessible on the iPad.
-
Trouble with Post Migration Scripts
I try to run the volrepair script but am getting errors. I have run the Update NDS option from nssmu but still now luck.
ccs_fs1:~ # /opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning: The following NSS Pools does not exist on the source server. Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server. Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS$(UYou need to have the same set of pools and volumes on the source server and target server (atleast the names should be identical).
The error says the pools or volumes that exists on the target server doesn't match with those on the source server.
Try updating them from nssmu or iManager.
Refer section "9.0 Preparing for Transfer ID -> 9.1. Prerequisites " of http://www.novell.com/documentation/....html#bookinfo
-Ramesh
>>>
From:
dmilam<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
05/03/2010 11:06 PM
Subject:
Trouble with Post Migration Scripts
I try to run the volrepair script but am getting errors. I have run the
Update NDS option from nssmu but still now luck.
ccs_fs1:~ #
/opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a
admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 ..6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning:The following NSS Pools does not exist on the source server.
Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server.
Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS
dmilam
dmilam's Profile: http://forums.novell.com/member.php?userid=11991
View this thread: http://forums.novell.com/showthread.php?t=409414 -
itunes easily synchs the selected picture folders onto the ipad, but it wipes out all previously synched photos. how do i stop that?
how to use iTunes to sync is in the
http://www.apple.com/support/itunes
For MacBook Pro community and OS X
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
While it isn't as easy to just use a Mac iDevice as media storage as Android and Windows, you can add documents and such like Word, PDF and others manually in iTunes to have them sync as well.
http://support.apple.com/kb/HT1386
http://support.apple.com/kb/HT1351
They are all there searchable from Bing, Google or every Mac product has a support page.
http://www.apple.com/support/ -
I apologize if this has been discussed already but when I read through some of the discussions, well frankly, I became more confused.
I have a MBP, an iPhone and the iPad. My iPhone displays all the same Yahoo mail folders which appear on my MBP Yahoo account. However the same is not true on the iPad. Is this even possible? I'm not as computer savvy as most so the terms POP and iMap confuse me. I expected the Yahoo mail to look the same on the iPad as it does on the iPhone, which looks like the Yahoo mail on the laptop!The settings on my iPad are as follows:
POP Account
Incoming mail Host Name:
Plus.pop.mail.yahoo.com
Outgoing Mail = SMTP Plus.smtp.mail.yahoo.com
Primary Server (same as outgoing mail) = ON
Other Servers = Off
iPhone Settings:
Outgoing = SMTP Yahoo! SMTP Server
Primary Server = Yahoo! SMTP Server = ON
I don't see any other settings on the iPhone
Not sure what the "plus" indicates on the iPad.
Can someone explain the differences that might affect the lack of folders on the iPad?
Thank you
Maybe you are looking for
-
Sales Area mandatory in sales order
Dear Sir, I want to make Sales area as mandatory in sales order and Inquiry . When we enter T. code VA01, in initial screen of sales order, without entering sales order document type in sales order VA01, system does not allow to process further. In t
-
Remotley connect to mySql via mm.mysql
Hello, I'm running WIN2k, JDK 1.2.1_004 and I'm trying to make a local java application to connect to mysql on my web server via mm.mysql. But it doesn't work I get the following error: SQLState: 08001 Message: No suitable driver Vendor: 0 I've tried
-
Idea for new (stationary) notebook
This is just feedback summary on the HP Pavilion dv7-3135eo, I got. So if you got a forum for "How would you layout your own notebook" this topic belongs... If I could upgrade this notebook, I would turn it into a stationary notebook. Partly because
-
Hi guys, I hope everyone is fine..... Well, i try to finish a project and only have to solve two small problems, sorry for post two question here at the same time, but both are related with swing, so.... 1) I am using a JOptionPane.showMessageDialgo
-
"request to server ical failed"
I get back an error message whenever I click on the red "i" symbol that just showed up on my calendars. I've never had the problem before, and I just re-subscribed to .mac.