No fullscreen pic of incoming caller comes on screen
hi there is no fullscreen pics comes on incoming caller when calles comes
the feature was removed in ios7
Similar Messages
-
iPhone 4 - my phone doesn't "ring". Speaker plays, it works on vibrate, and when you set the ringer, it will play. Just not when an incoming call comes in. Any thoughts?
Check the position of the mute switch. On the side, just above the volume keys.
-
My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??
I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue
-
Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button with a slider to attend the call and there is no red button to reject the call. is it a bug or some setting?
Because it behaves differently depending on whether the phone is locked (in standby) or unlocked (in use) when the call comes in.
-
Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?
Hello ElleMalloy,
Sorry Im Just Responding Phone Has Been Downloading And Charging.
Well I Will Start Here,
I Tried Everything I Even Restarted My Settings Just So I Can See if That Would Work Because Someone Sujested It But What They Neglected To Say That Their Probrolem Was With A Ipad ? Anywho To Keep It Short I Went Online Logged A Complaint With Apple Made A Appointment With A Apple Store In My Area To Take The Phone There After Trying Everything (Resetting, changing setting etc..........) Nothin Worked Upon Taking The Phone To The Store They Swapped Out My Phone For A New One Volume On New Phone Is Perfect And I Only Had To Wait 40 Minutes -
I upgrades the software of my iPhone 4s to 5.1 since then the flash light is blinking when incoming call comes rebooted the ph many times but doesn't help what shall I do ?
Go to Settings>General>Accessibility and turn LED Flash for Alerts to Off.
-
I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a great big photo for an incoming call?? I have installed ios 7.1.1
Sorry, you can't. Design change with iOS 7.0. Tell Apple you don't like this here:
http://www.apple.com/feedback/iphone.html -
There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.
A good read. Have you done anything at all to resolve your problem. Reset? Restore?
By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here. -
how can i reject incoming calls in lock screen , without using ON/OFF key ??? (in iOS 7.0.2)
You can't. Either tap the Sleep/Wake button or just let the call to continue to ring.
-
This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in, even though my friend hung up. It kept going and going, so I tried holding down the lock button to turn it off but screen was still black/turned off. Hitting home did nothing. My friend said to try holding down the lock button and home button together to reset it. I tried this and yet nothing happened. I am waiting for the battery to drain out and give it a try.
To reset, you have to press both the home and sleep/wake buttons until the Apple logo appears - takes 10-15 seconds.
-
How do i get fullscreen photoes during incoming calls
After updating my iphone 5 to iOS 7.1 a callers photo became small and i would like to have a fullscreen photo back. is possible?
That feature was removed in iOS 7.1. You can tell Apple you'd like it back here:
http://www.apple.com/feedback -
I upgraded my AT&T iPhone 4 from IOS 6.0.1 to IOS 6.1 on Monday evening. It completed successfully overnight and everything looked good on Tuesday morning until I received my first call. When the phone rang, the screen showed the typical 'call waiting' screen, asking me if I wanted to 'End Call and Answer', 'Ignore Call', or 'Hold Call and Answer'. Using any of the selections still does not allow the call to be answered. It takes a hard reboot to clear the call.
If I make an outgoing call, the phone hangs on the 'End Call' portion. It shows the button being pressed and that it is ending the call, but it doesn't ever end. It also takes a hard reboot to clear the call.
So, I have tried hard reboots of the phone, without any success. Last night, I tried to reset the phone to factory settings and restored my phone content from iTunes. Unfortunately, I still was having the issue. I have also tried restoring the Network Settings, and that did not work as well.
Has anyone seen any similar behavior and have any advice?
ThanksA brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really -
Automatic refresh of browser when an incoming call comes in
If you have to take a phone call and you're in the midst of typing information into a web page you lose all of it because when you hang up the call, it goes back to Safari and refreshes the page.
Is there anyway to stop this from happening? I just lost a super long comment I was typing on a blog.
Thanks in advance!It does this because it needs sufficient memory for everything else. It clears the cache of that site which then makes it need to refresh. No way to disable this.
-
How Incoming calls come to UCCX IVR
i have create internal calls from uccx to ucm. but when i try to call from PSTN the call is not reached to UCCX recording. can any one help to solve this issue by steps by steps.
As explained by Anand you need to ensure the cti and cti ports are reachable from GW CSS. Basically, here is what to do:
build the trigger using one of your DIDs
ensure the CSS applied to the GW has access to partitions assigned to the CTI route point AND cti ports.
If you already assigned a non DID number as JTAPI trigger you can add a translation pattern in CUCM to translate a DID to this number.
HTH,
Chris -
I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped working. And the p.roblem now i cant use it. I tried restarting the phone but I can't restart it due to my lock button not working so i need help with a solution on what i can do. I missed my appointment today because i could no longer use my phone and i'm now stuck using my laptop. I did also try connecting it to my MacBook but the screen was still unresponsive and black. I rescheduled my appointment to Monday to see what is wrong with my button and screen but in the meanwhile i would like to know if there is anything i can do or if i would just have to wait until monday and take it in to Apple. Any help would be really appreciated as i am phonelss for now until i take it in to Apple in a few days. Thanks.
You wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Maybe you are looking for
-
I have an I phone and my partner has just got one. How do we set up his own itunes account as it showed mine when we connected his phone to the computer for the first time. Thanks
-
Problem deploying a web application (war)
Hello, I am having a problem deploying a web application in Tomcat. Here is what happens: -I copied the war file into the webapps directory. -I started Tomcat. -Tomcat automatically expanded the war file into a directory of the same name. The problem
-
Reading through a Soap Envelope
Hello, The scenario is a synchronous, PI is sending a request to a web service hosted on the third pary systems. The request has been initiated by the method provided in the WSDL.The third party system is sending the response in terms of a Soap
-
New phishing scam - vzw71?
Just got a call from 800-600-1228 telling me about a $71 discount I could get just be logging into my Verizon account at http://vzw71.com Excellent replica site of vzw.com - but check the copyright at the bottom (2012) vs 2013 on the real site, So be
-
need help in finding the 'accept button for downloading adobe reader. I'm using a Mac.