No gatekeeper and iphoto doesnt work after upgrading

I updated my macbook pro to mountain lion recently and now iphoto won't open anymore- says the application is damaged.
Also gatekeeper does not seem to have been installed with mountain lion.
Anybody?

1. Make a back up of your iPhoto Library - you should always have a back up of it anyway.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Similar Messages

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

IPhoto stopped working after upgrading to 9.3

I upgraded to iPhoto 9.3 and iPhoto stopped working. So I dragged it to the trash and went to reinstall from the original iLife'11. The reinstall finished normally, but when I tried to open iPhoto it instructed me to run Software Update. I did and Software Update informed me all of my software was up tp date. Again I tried to start iPhoto with the same result - run Software Update. Anyone have a suggestion?

download and install the 9.1 update
LN

Iphoto Not Working After upgrading to Yosemite

I am unable to use iPhoto after upgrading to Yosemite.
I have two apple id and when I used one of them i get the message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled'. I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
I can't use iPhoto and the iPhoto library to does not work

I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
Sign out of the App Store and then sign back in with the other Apple ID.

Screen rotation doesnt work after upgrading to lolipop

After upgrading my phone to lolipop the auto rotation doesnt work even in the safe mode

@alahmed
Repair your phone with PCC and report back
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Internet and more not working after upgrading to iOS 8

After upgrading to IOS8 - I had multiple issues
Network Connection is shotty and disconnects after clicking few sites
Email gets stuck
There is some sort of a bug(s) system is not stable.
Safari is not working
Apple needs an update or patch very soon.

Sept. 22, 2014 Hello everyone finally a solution - The issue is with the 5GHZ networks. Reset your network of your IPAD and/or IPHONE and connect to your slower 2.4GHZ network - So far issue is fixed but for gamers and serious bandwidth absorbers, it might be a disappointment with the 2.4GHZ.
Let's face it, it's better than the sporadic network drops.
My Movie connection was uninterrupted.

[SOLVED] Xorg and keyboard not working after upgrade.

Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)

WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

Drag and move doesnt work after 5 mintues

Hi,
If i start my system up, i can move a window by dragging the titlebar, but then after about 5 minutes it doesnt work anymore. Also i cant copy text by clicking left and moving the cursor. I have a Lenovo T410 and i am using the touchpad. I just freshly configured my system on a new ssd from vertex. Before i didnt have this issue and i copied my old xorg files to the new system but that didnt work either. I have no idea where the problem lies.
Thanks for your help!
Cheers Felix

Hi Igoksadze,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with the system if the system wakes up the keyboard and mouse not working.
As per the query would like to give some trouble shooting steps:
Start>C Panel> System & Security> Power Options> Change Plan settings>Change adv power settings> (and look for the sleep tab / settings along with USB, etc).
Check if the USB port is disabled or enabled.
Also check in BIOS for the wake up power options.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Canon scanner doesnt work after upgrading to maverick

Hi after upgrading to Maverick on my 2.93 GHz Intel core 2 duo processor with 4 GB memory and a 10.9.4 version for my OS X my canon MG5220 all in one printer scanner shows as MP Navigator EX quits unexpectedly.

Thanks so much, Eric! Yes, that solved the problem.

Mouse and keybord stopped working after upgrading to Mavericks.

Since upgrading from snow Leopard to Mavericks, the Apple USB keyboard and mouse nolonger work on my Mac Pro. I've tried booting in safe mode sucsessfuly, but the keyboard and mouse still don't work. Can anybody help me please?
Thanks,
Dave

Test the devices with another computer, if possible. If they work, or if you can't test, see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I just want to crop my photos! Preview and iPhoto not working since upgrading.

I just upgraded to OS X Yosemite, and since doing so the edit function on Preview is non-selectable and iPhoto won't save any of my edits!? Please help this is an urgent requirement! I'm not interested in upgrading to the new Photos app - I've head terrible things about it.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Facetime and iMessage not working after upgrade to Mountain Lion

Was running Messages (beta) and Facetime on my Macbook Pro with Lion. I used both Facetime and sent iMessages through the Messages client, and they were both working 100%.
Today I upgraded from Lion (latest version) to Mountain Lion. All is working except iMessages (through the Messages application) and Facetime. When I try to log in, using the same @gmail.com account as I had done before, I get the message saying "The server encountered an error processing registration. Please try again later".
I know that iMessage, with that account, is working. I am using it from my iPhone and it works ok. And I use the same account in iTunes, and it is ok there as well.
So what is wrong ? What happened with iMessage and Facetime connectivity after the Mountain Lion upgrade ?

backup the device with itunes.
Restore the device with itunes and set up as new.
Sign into the facetime and imessage to activate it.
After that is done and activation is good.
Restore from the backup.
Then make sure to sign into facetime and imessage again and you should be good to go

Iphoto not working after upgrade

After just using my IPhoto yesterday, I just got a message that I needed to upgrade my version of IPhoto. I downloaded it and keep getting the same message - To prepare the library, use the iPhoto Library Upgrader available from Apple.
I have MacOSX Version 10.7.5 and plenty of hard drive space. IPhoto is version 9.3.2
Help?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Itunes doesnt work after upgrade from 6 to 7

i've recently upgraded to itunes 7...and it wont open now..i've installed both quicktime and itunes..and i've checked that quicktime IS 7.1.3 which is compatible...and after i double click the itunes icon..i get a licence agreement..then i click agree..and right after that i get a error msg saying "the itunes application could not be opened. An unknown error occurred (-200).
anyone experienced this before or hav the solution??
many thanks
ken

I have seen that error message before,
What you will want to try is uninstalling Quicktime from Add remove Programs,
Open up My Computer, Browse to C:\Program Files\ and delete the Quicktime folder (There may be more than one)
Empty Recycle Bin and Restart
After the restart go to http://www.apple.com/quicktime/download/win.html and make sure that you select QuickTime 7.1.3 for Windows 2000/XP and download and install it.
That should take care of it.

LOG AND TRANSFER not working after upgrade ...?

Hi ..
I am running FCP 6.0.5
I am using Mac OSX 10.5.6
I've been using the 'log and transfer' window of FCP for the past few months without any trouble ... until today.
Every time i transfer the clips everything appears to go smoothly, but then when the 'transferred' clip is played back there is an odd 'jumping' or 'glitching' ... IE: the resulting footage is definitely NOT usable.
The only thing that i can think of that's changed is the fact that I upgraded the software last thursday and i probably hadn't transferred any footage since then. Is there an FCP conflict with the latest quicktime or Itunes upgrades?
I have tried re-transferring some clips from last week before the upgrade and the transfers now have the glitches.
I need this working as soon as possible! I have deadlines! Anyone who can help it would be greatly appreciated.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

No gatekeeper and iphoto doesnt work after upgrading

Similar Messages

Maybe you are looking for