No global.srvc on the ITS Server

Hello everybody,
i just figured that we do not have a global.srvc file on the ITS Server. Even tho the server is working without any problems.
I am not that ITS Expert, but shouldnt it be there or have you have to create in manually?
regards,
Markus

never mind. Got it

Similar Messages

  • How to install the ITS server

    Hi,
    I am looking for the ITS server in my ECC 6.0 installation files but i could not find it. Can someone help me to identify the files? Its used to access sap server via the web browser.

    hi,
    You can configure and administer SAP Integrated ITS using the following SAP Transactions:
    RZ10 u2013 definition of parameters
    SICF u2013 configuration of the ITS service
    ST11 u2013 traces
    SITSPMON u2013 status of integrated ITS
    please refer the following link for details;
    http://www.techyblog.com/docs/integratedits.pdf
    regards,
    gokul

  • How to use the integrated ITS server in WAS6.40 for WEBGUI

    Hi,
    I am testing the Portal 6.0SP6 on WAS6.40SP7.
    Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system.  If I am going to use webgui to call a transaction, do I need the ITS server at all?  The reason I asked because I thought WAS6.40 came with an embedded ITS server.
    If I can make use of the integrated ITS server, how do I configure the system connection?
    Thanks,
    Edmond wong

    I have read the past posts, but I am still not clear... We are implementing mySAP ERP 2004.  This will include ECC 5.0 and EP 6.2. 
    We currently have R/3 4.6C and EP5.5.  From EP 5.5 I have users executing R/3 transactions directly from EP using the standard Master iView.  This traffic goes via the ITS virtual instance for the R/3 system.
    I am trying to decide if I need to setup a separate ITS to continue to do what we do now OR if the direct call of a transaction from EP6.2 using the SAP supplied Master iView can be accomplished using the Internal ITS on ECC 5.0.  We do not have the DEV systems set up so I cannot test.
    Any comments?
    Thanks,
    Rich

  • The ITS could not connect to the Web Application Server or the R/3 System

    Hi Gurus
    we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
    Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server"  these are working fine for webgui!
    and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
    the error message is :
    Connect Error
    The ITS could not connect to the Web Application Server or the R/3 System
    any help please
    Thanks in advance

    Hello Balaji,
    Check the global.srvc file for errors in the R/3 system information.  The ITS uses the following to connect to your system:
    ~appserver     
    ~routestring     
    ~systemname
    ~systemnumber     
    ~logingroup     
    ~messageserver     
    Which parameters are used depend on how you are connecting (logon group, route string, etc.)
    Edgar

  • Intergated ITS and global.srvc

    Hello,
    Working on Single Sign On from EP 6.0 SP16 to ECC 5.0 SR1. Using integrated ITS 6.40. 
    Saw a reference to ITS parameter settings in the global.srvc, but cannot find this file on the ECC WAS 6.40.  Is this file required for integrated ITS?
    Thanks,
    Alan

    hi Alan,
       To acheieve Single Sign On from EP 6.0 SP16 to ECC 5.0 SR1 we do not require this global.srvc. Check out the below thread.
    Transaction Iview with integrated ITS.
    Regards,
    Gopi

  • How do I have a cRIO register its IP address with the DNS server, clearing any previous entries?

    I've run into a problem when I try to move a cRIO-9073 from one network segment to another (say 10.1.33.x to 10.1.36.x):  The old IP address remains registered on our DNS server, so trying to access the cRIO by its DNS name fails as the DNS server tells my PC to look for the old IP address.
    When I search the DNS server from my PC using "NSLOOKUP" with the old IP address, it finds the DNS name of the device.  If I repeat the search with the new IP address (MAX finds the device with its new address, but I hate to have users use MAX to find it), it again returns the DNS name, so it appears the DNS name is registered under two IP addresses on our DNS server.  I've also repeatedly tried to flush my PC's DNS cache using command "IPCONFIG /FLUSHDNS", but it still tries the old IP address.  I also see in MAX that the cRIO is using the same DNS server my PC uses.
    Our IT people say that I have to tell the device to re-register its DNS name.  They told me a command to do it from Windows (command "ipconfig /registerdns"), but obviously this is VxWorks on the cRIO.  Is there a command to do this on the cRIO or a setting in the "NI-RT.INI" file I can change?  I honestly don't think this is the issue (as it successfully registered the new IP address under its name), but I want to try it if it's possible.
    Thanks!
    Erik
    ps - Our IT dept. won't let me use static IPs unless I get them assigned by both their MAC address AND the network jack they're connected to, so that's out.

    Normally this is actually a function of your DNS server. It needs to perform a periodic flush of stale records. You can check the RFC for the DNS protocol and build the necessary packet yourself.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Hyper-v replication Error Hyper-V received a digital certificate that is not valid from the Replica server 'burstingreplica'. Error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp"

    Hi,
    When trying to initiate hyper-v replication from the main server i'm getting this error in the event logs.
    Hyper-V failed to enable replication for virtual machine 'RECADemo': A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file. (0x800B0101). (Virtual Machine ID 561591B6-567C-...)--I'm using certificate based auth and cert is installed/recognized on both machines.Please help.Thanks,Jaffer
    Jaf

    Hi,
    This error occurs because the Microsoft Certificate Trust List Publisher certificate expired. A copy of the CTL with an expired signing certificate exists in the CryptnetUrlCache
    folder. Please try to renew the Trust List Publisher certificate.
    The related KB:
    Event ID 4107 or Event ID 11 is logged in the Application log in Windows and in Windows Server
    http://support.microsoft.com/kb/2328240
    How to Renew the Site Server Signing Certificate (Microsoft Certificate Services)
    http://blogs.technet.com/b/configmgrteam/archive/2009/02/11/how-to-renew-the-site-server-signing-certificate-microsoft-certificate-services.aspx
    Manage Trusted Publishers
    http://technet.microsoft.com/en-us/library/cc733026.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT4623 when i am updatin my i phone 3gs its sayin could not be activated because the activation server is temporarily unavailable

    when i am updatin my i phone 3gs its sayin could not be activated because the activation server is temporarily unavailable

    Call AppleCare, give them the model and serial number of your iPhone and find out which cell carrier it is now locked with. Contact that cell carrier and see what the process is to officially unlock your iPhone and whether you qualify.

  • I have many contacts in address book from a certain company that just changed its name.  Is there a way to globally change all the contacts to the new company name all at once?

    I have many contacts in address book from a certain company that just changed its name.  Is there a way to globally change all the contacts to the new company name all at once?

    Rando510 wrote:
    Although clunky as you say, this sounds like a reasonably efficient way to accomplish what I was seeking.
    Address Book has no global find/replace. Bob Grove suggested one possible workaround; however, a grep-capable text editor (eg, TextWrangler) is better than TextEdit if complex strings are involved.
    An alternative is Bento (which is designed specifically to interact with the AB database), but it's not free.

  • Why can i not get my email to send from my mac? the outgoing server keeps saying its offline?!

    why can i not get my email to send from my mac? the outgoing server keeps saying its offline?! any help would be greatly appreciated

    markwmsn wrote:
    To each his own. I own Outlook, but I avoid using it like the plague. The only Mac mail software I have liked better than Apple's Mail was Qualcomm's Eudora, which is no longer updated or even available, won't run without Rosetta, and unfortunately never quite got the hang of IMAP.
    Check out this post regarding this user's continuing use of Eudora on his Lion MacBook:
    Shield Eudora from Lion's Claws
    A thousand thanks and kudos to Michael for this fabulously excellent thread!
    Eudora's now happy in her new Snow Leopard VM home on my Lion ModBook!
    Appears essential to keep resource-forked data off Lion disk:
    First attempt with Eudora on SL VM was sharing data on Lion disk. Error messages on open like "can't find Table of Contents" suggest Lion ate resource forks crucial to Eudora.
    Found success by transferring data from SL Mac to thumb drive, then mounted drive in SL VM so Lion couldn't touch.
    While Michael warns against storing data in VM, appears there's no choice with Eudora. At least She's enthroned on a mirrored RAID.
    There is Nothing like Eudora! (to tune of "There is Nothing Like a Dame" from South Pacific -- Oops! my gray hair is showing!)
    (It's amazing Parallels can force Lion to store taboo resource forks. Thank God for code warriors!)
    B
    http://forums.macrumors.com/showpost.php?p=16496788&postcount=355

  • Change the ITS connection to Message Server

    Hi Gurus,
    Our project is using EP7 to access ECC 6 via ITS web access. EP7 -> ITS -> ECC 6
    Currently, we has configured Group access via Message Server on ECC 6. We notice that, the ITS is still connected to Single Application Server on ECC 6. Do anyone know how to change the ITS connection to Message Server instead of Dedicated Application Server?
    Please help.
    Thanks,
    HauChee

    Hello,
    Let's say your ITS port is 8000
    The way to distribute load of integrated ITS requests to the different Dialog instances is to call port 8001 of the message server... That's it...
    So basically the rule is:
    Always call the message server hostname + defined ITS port number + 1
    So in your EP7 system object you define your ITS as:
    http://ECCITSMessageServer.domain.com:8001/...
    Same rule apply in the WebAS section of that EP system object.
    Then, the message server will redirect the request to one of the available dialog instances of integrated ITS on port 8000.
    You will be able to see the redirection happenning by using an HTTP sniffer program like HTTPWatch ($$).
    Regards,
    Marc.

  • Tests the connection to an SAP ITS server

    Hi friends,
    When iam trying to test the connections in portal the following errors are seen.Please help me to solve the problem if it is in the abap stack or java stack
    SAP Web AS Connection
      Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Checks if the host name of the server can be resolved.
    6. Pings the server to see if it is alive.
    7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
    8. Checks HTTP/S connectivity to the defined back-end application
      Results
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000)
    5. The host name evoxssqab.comm.nonprod.evo.internal.vodafone.in was resolved successfully.
    6. The server evoxssqab.comm.nonprod.evo.internal.vodafone.in was pinged successfully.
    7. The Web AS ping service http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
    8. An HTTP/S connection to http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/bsp/sap was not obtained successfully; this might be due to a closed port on the Firewall.
    ITS Connection
      Test Details:
    The test consists of the following steps:
    1. Checks the validity of system ID in the system object.
    2. Checks if the system can be retrieved from the PCD.
    3. Check whether the system object has a valid system alias
    4. Check whether a SAP system is defined in the system object
    5. Validate the following parameters: ITS protocol; ITS host name
    6. Checks if the host name of the server can be resolved.
    7. Pings the server to see if it is alive.
    8. Checks HTTP/S connectivity to the defined back-end application
      Results
    1. The system ID is valid
    2. The system was retrieved.
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ITS Protocol (http) ITS Host Name (evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000)
    6. The host name evoxssqab.comm.nonprod.evo.internal.vodafone.in was resolved successfully.
    7. The server evoxssqab.comm.nonprod.evo.internal.vodafone.in was pinged successfully.
    8. An HTTP/S connection to http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/gui/sap/its was not obtained successfully; this might be due to a closed port on the Firewall.
    thanks

    Hi Murthy,
    From the Result message which you gave, it seems that you are using the incorrect Hostname/Host path.
    Try giving portal server name, generally the system name would be the portal server name.
    The port which you are using is 8000, try 80 instead.
    Please find the below URL for more details about these parameters.
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/2f86691ca96d7be10000000a114a6b/frameset.htm
    Thanks,
    Ansar

  • Factory reset my ipad but now its saying the activation server isnt available can anyone help

    factory reset my new ipad but it is now saying that the activation server isnt available, has anyone got any ideas please?

    Ring 133622

  • I am restoring an iphone 5 that i bought from a friend and when i go to activate it its says "iPhone could not be activated because the activation server is temporarily unavailable..."

    I just bought this iphone 5 from a friend and it has no sim card in it. i got it restored but when i tried to activate it on the intial setup it is say "iPhone cannot be activated at this time the activation server is temporairly unavailable. ???

    yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
    and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
    trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
    no worries

  • I have a update waiting and the box that says software update trys to connect to the update server but it can't do you have any help for me cause its saying i need this update real bad

    firefox says i have a update waiting but i try to install it and the software update box pops up and says (connecting to the update server) but thats as far as it goes can you please help me solve this issure

    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    XP:
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    If you have problems with updating then best is to download the full version and uninstall the currently installed version.
    You may need to remove the Firefox program folder to do a clean install of the new version.
    Do a clean (re-)install:
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    * It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
    You do not need to create a new profile, that is not necessary for this issue
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Maybe you are looking for