No Glossary When Viewing Compiled CHM
RoboHelp HTML 7.02, Windows XP. I'm generating a CHM with
TOC, index, search, and glossary tabs. When I click the glossary
tab in my CHM, I get a blank white pane, even though my glossary
isn't empty in my project. I've specified a default window in which
the glossary box is checked, so I'm guessing that's why I've got a
glossary tab at all. (But I have other parameters in that window
setting that don't seem to take...)
How do I get my glossary terms and definitions to show?
Thanks,
Ben
Hi Ben
Is this on the development PC or on PCs after you distribute?
If it's the development PC, I'm a bit stumped. It should work
without issue. But if it's on other PCs after you distribute, it's
likely because the HHActiveX.DLL isn't present and correctly
registered on those PCs. That DLL provides functionality for the
Browse Sequence area and the Glossary tab.
Cheers... Rick
Similar Messages
-
Selected images disappearing from compiled CHM
I've got a project that I'm trying to get compiled into a CHM file from RoboHTML 8. Everything seems to have gone fine, except that four of the images I added to the project prior to compilation don't show up in the CHM. They seem to be fine when viewed from RoboHelp, they're where they're supposed to be, and the source code of the compiled CHM refrences them correctly. And yet... they don't actually show up! I have tried renaming them, and reimporting them into the project, but these tricks didn't work. I'm hoping someone out there has some suggestions!
I've had this happen a few times.
I deleted the image from the topic and then inserted it again from the
RoboHelp project files (from the "Images in Project Folders" section on
the left side - not from the open folder icon).
This solved the problem for me; hope it helps you as well.
Debbie
Debbie Sarig | Documentation Manager | Magic Software Enterprises Ltd
Tel.03-538-9386 | Fax. 03-538-9333
Email. [email protected] | www.magicsoftware.com
(Embedded image moved to file: pic19072.jpg)Magic Software Logo
DISCLAIMER. Information in this message and its attachments may be
privileged or confidential. It is for the exclusive use of the intended
recipient(s). If you are not one of the intended recipients, you are hereby
informed that any use, disclosure, distribution, and/or copying of this
information is strictly prohibited. If you receive this message in error,
please notify the sender immediately and delete all copies of this message.
We recommend that you scan your incoming Emails. We cannot accept
responsibility for any transmitted viruses.
From: elemonated <[email protected]>
To: Debbie Sarig <[email protected]>
Date: 06/17/2009 05:56 PM
Subject: Selected images disappearing from compiled CHM
I've got a project that I'm trying to get compiled into a CHM file from
RoboHTML 8. Everything seems to have gone fine, except that four of the
images I added to the project prior to compilation don't show up in the
CHM. They seem to be fine when viewed from RoboHelp, they're where they're
supposed to be, and the source code of the compiled CHM refrences them
correctly. And yet... they don't actually show up! I have tried renaming
them, and reimporting them into the project, but these tricks didn't work.
I'm hoping someone out there has some suggestions! -
TIFF & JPEG renders of RAW files appear different when viewed in Bridge
I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal physical drives, Canon 50D, CR2 files. I have a camera profile generated through Profile Editor, and the monitor is calibrated with i-1 Match.
I have been practicing with the new Basic Panel controls (Process 2012). When I felt that I was getting the hang of them I started saving JPEG and TIFF files and noticed differences between what appears in Bridge and ACR. I worked on this for some time and searched out some other discussions in the Forum which seemed to talk about similar results. I have now tried Image Processor via Bridge, Save Image in ACR, and Open>Save manually in PS CS6. By whatever route, the TIFFs and JPEGs are different (lighter in the following examples, but this is not always the case), while PSD saves seem to be close, but not identical to the CR2 when viewed in Bridge or Photoshop. Here is a screen capture of Bridge thumbnails which show the differences.
I hope the labels come through legibly. The two images on the second row are CR2 and PSD respectively. What is really odd to me is that when I resaved the PSD file as a TIFF, the same sort of difference shows up in the TIFF. (See _MG_7960_via_PSD.tif above.) I have uploaded the CR2, its XMP, a TIFF and a JPEG on Sendspace (107 MB). I did this earlier in my experiments and regret that the file naming is not as informative as might be.
http://www.sendspace.com/file/t0lhko
I have run a few other ACR adjusted CR2 images through Image Processor and seen a variety of differences between the rendered files and the RAW versions. The differences seem to be in Exposure and Contrast. Most of these looked somewhat darker, unlike the examples above.
I will happily provide any other information on request. Thanks!
Photoshop System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 3511 MHz
Built-in memory: 16382 MB
Free memory: 13415 MB
Memory available to Photoshop: 14766 MB
Memory used by Photoshop: 71 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 460/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 460
OpenCL Unavailable
Driver Version: 8.17.13.142
Driver Date: 20120515000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 460
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Kieren\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 770.4G, 644.1G free
K:\, 931.5G, 482.3G free
L:\, 1.82T, 854.4G free
H:\, 1.75T, 505.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.1
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEThanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto: -
Management Point created using Powershell will error CM Console when viewing properties
Greetings,
We have an established ConfigMgr 2012 R2 CU3 environment with several Primaries and management points already active. These were all installed manually using the CM Console.
I am now trying to add additional Management Points using Powershell using the command:
Add-CMManagementPoint -enablessl -sitecode "ABC" -sitesystemservername "MPservername.domain.com" -allowdevice -clientconnectiontype internetandintranet -generatealert -verbose
The PS completes without error, the MPSetup.log and MPControl.log indicate all is well once the setup completes
The MP appears as a component under the Server when viewing in the console
The IIS logs show clients communicating fine and the CM component Status monitor is all green with no errors showing in the status message
A Get-CMManagementPoint returns fine showing all the same details as other working MP's
However if I try to view the properties of the Management Point from the console, the console will error
If I click Continue it will open the properties but they don't appear correctly. The "sitedatabase" tab is missing and the mobile device and generate alert boxes aren't selected. If I click Quit the then console crashes.
So everything appears to be working, except for being able to view the actual properties through the console.It doesn't appear to give a specific error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.ConfigurationManagement.AdminConsole.SiteSystems.ManagementPointConnectionsControl.InitializePageControl()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnInitialize()
at Microsoft.ConfigurationManagement.AdminConsole.SmsPropertyPage.OnLoad(EventArgs e)
at System.Windows.Forms.UserControl.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.ControlCollection.Add(Control value)
at System.Windows.Forms.TabControl.ControlCollection.Add(Control value)
at System.Windows.Forms.TabControl.TabPageCollection.Add(TabPage value)
at Microsoft.EnterpriseManagement.ConsoleFramework.SheetFramework.AddTabs()
at Microsoft.EnterpriseManagement.ConsoleFramework.SheetFramework.OnLoad(EventArgs e)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
Followed by lots of entries of the loaded dll's and finished off with
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box. -
How to programmatically jump from one topic to another in a compiled CHM file
Hello,
I'm working with the trial version of RoboHelp 9.0, trying to evaluate it for my company before we go ahead and purchase it.
Basically I'm importing a Word document and then exporting it into a .chm file.
I'm using a programing tool to jump from one topic to another in the compiled CHM file.
The topic is displayed just fine but the content on the left side stays closed and doesn't open accordingly.
I'm not sure how to extract from the RoboHelp viewer a topic's HTML address to serve as an input for my programming tool.
I'll appreciate any idea.hi
say there are two infoobjects X and Y.
X is existing infoobject and Y in new one.
go to infosurce-search for X-create export datasource - map the rules and load the data.
This is one way.
Other way is u can use X as a reference object of Y so that both of them have same structure and both objects will share common database tables in BW which are exsting for X.
Hope this helps.
Kindly assign the points if it helps. -
Compiled CHM File Does Not Reflect New Project Name
I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
As a result, the output Help that the user sees still has the old project name in the title bar.
All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME window?
3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.)
Will any of these actions correct the problem? I appreciate any help you can give.Welcome to our community
Try File > Project Settings.
And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug MayI can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.
-
Hi. I am having an issue with music on my IPod. It would probably be easier to explain my specific issue: I have songs by Band of Horses from Cease to Begin. When viewing my albums through cover flow, it shows Cease To Begin as two separate albums, one with only Islands on the Coast, and the other having Islands on the Coast with 3 other songs. If I delete the album with only one song from my IPod, it deletes the song from the other "album" as well. If I go to "All Songs" by Band of Horses, it only shows one Islands on the Coast, so it is not a duplicate issue. Also, in Itunes, it only shows one album. I just recently updated to iOS5 on my 4th Gen IPod Touch, if that helps.
Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
The earlier post was my first attempt at posting and had some typos. Repeated with typos corrected.
I have a Macbook Pro Retina 13" Late 2013 with preinstalled Mavericks.I now have the 10.9.1 update. Almost from the time of purchase in Nov '13, I have been experiencing freezes and slow & unresponsive trackpad. I have more or less narrowed this symptom as happening when viewing downloaded PDF files. The only option is to force eject, if available or shut down. I spoke to Support as I thought it was a RAM issue and they told me that in Mavericks RAM showing almost full was normal as it uses RAM differently. They took me through some resets and cleaning up which has helped a little but freezing stll happens. This never happened with my Macbook AIr running Lion. Any suggestions?
Shankar9
Macbook Pro Retina 13" Late '13-Mavericks 10.9.1
Macbook Air 13" Mid '11-Lion
Macbook Aluminium 13" Late '08-Snow LeopardSo a PDF file that you can view in Preview on your MBA causes your new MBP to lock up and/or slow down. Is this right? Also you say more or less narrowed down to PDFs with Preview but does the computer exhibit this behavior with other programs and if so under what conditions? And how much free hard drive space do you have?
Viewing memory use in Mavericks is different than with previous versions of the OS. Today it looks like we need to pay attention to what Apple calls Memory Pressure which is gauged by the bar graph in Activity Monitor and to the Virtual Memory being used. When the memory pressure graph bar gets too high it turns red and that's bad news. Looking at how much memory is being used doesn't help - I have a 16GB computer and with almost nothing running it still shows something like 15.79GB used but the memory pressure graph is just a think green line. So unless you see the memory pressure bar turning red lets not worry about memory usage at the moment.
If among the things AppleCare had you do was reinstall Mavericks then I recommend a trip to the Apple store - and take a problem PDF file with you to demonstrate. -
Why do images within a PDF look jagged when viewed in Acrobat Pro 10.1.6?
Using a MacBook Pro running Mac OS version 10.7.5 with NVIDIA GeForce GT 650M 1024 MB graphics card. High-resolution source images look fine in other software, and embedded images in a PDF look fine when viewed on Google Drive, but curves and diagonal lines look jagged when viewed in Acrobat Pro 10.1.6. Checking smoothing options in Preferences only adjusts the position of the jagged edges; it neither enhances nor ameliorates them.
I created a sample PDF to illustrate the problem I'm having. Created in illustrator, exported to PNG and converted to PDF. Here is a screenshot of the source PNG side-by-side with the PDF I created from it:
Please note that when I preview the PDF in Finder, and when I view the PDF in Chrome using Google Drive, the image looks fine. Here's a link to the sample PDF:
http://www.sendspace.com/file/77f5m6
Any assistance is appreciated. Thanks!Unfortunately, as I mentioned in my original post, I've already tried toggling smoothing options. They don't make the jagged edges go away—they just change them slightly. In some cases, as with the sample file provided, it does help smooth the art out, but it never looks as good as it did going in, in a recent project, toggling smoothing options didn't affect the appearance of the image at all. Zoom does not appear to relieve the artifacting.
A little clarification: this PDF was created from a flat PNG, but I have had this issue with PNGs and TIFFs as well, generated by both Photoshop and Illustrator. To reiterate, the PDFs display fine in other software—Finder preview looks great, and the same file viewed in my browser via Google Drive looks as intended as well. A colleague was able to replicate this issue in Acrobat on his Windows machine. This appears to be a rendering issue specific to Acrobat with regards to the files I use it to create. -
Sapscript output(Spool) to PDF problem when viewed
We have a number of documents which are output in Russian using the Cyrillic courier font within our Uincode SAP system. They look fine on the spool when viewed, print okay, and all look fine when converted to a PDF file (using RSTXPDFT4) and viewed via Adobe PDF viewer (vers 9.1.20), except one form, the invoice, which will not display properly in Adobe, showing square blocks with crosses through them when viewed. The strange thing is that when this same PDF is viewed via Sumatra (Open source PDF viewer) it looks perfect, but will not display via the Adobe PDF viewer, even though all the other delivery/dispatch docuemnts (all Sapscript) print and view fine via the Adobe PDF viewer.
I guess I could suggest that we just use Sumatra from now on, but that is not really the answer when you have a multinational company which has Adobe already installed on all hardware as default.
Has anyone come across this problem before. I was wondering if there could be anything in Sapscript that might have caused this as this is a copy of SAP standard Russian Invoice Sapscript (J_3RVINVOICE)?
I'm going to check OSS to see if there's a fault with the PDF convertion program (RSTXPDFT4) but I would like to hear from anyone that may have encountered the same problem.
Regards
GaryHi Gary
How the issue is resolved, please let me know. Since i am also facing same issue.
Thanks
M G Shankar -
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica<br><font face="Helvetica" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font><br>
Helvetica Neue<br><font face="Helvetica Neue" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font>
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page.<br />
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps -
I have a brochure I need to print. When viewed on screen it is pixelated, however when I change to presentation view it is fine. I need to print on presentation view. How do I do this?
Sounds to me more like you have the Display Performance set on Typical rather than High Quality Display. Unless there is a problem with a missing or out-of-date link, the display in ID has nothing to do with output quality -- all of the image data is used for output.
-
When viewing a note in the bridge how do you switch to landscape full screen mode?
When viewing notes in the Bridge, there are two modes after pressing messages. One is portrait where the note being viewed shows in full screen after going to it from the inbox list. The other is in landscape where the inbox list is on the left and notes on the right. I want to zoom to a full screen landscape view of the note. I know that the device is capable of displaying a note this was as this is what you see when you touch the icon in the upper left corner to go directly to a new note or an urgent one, but I can't figure out how to get there from the normal note display.
There are two full screen modes in FCP X when running in MacOS X Lion.
Fullscreen playback:
Enter using the double arrow on the viewer or with command-shift-F.
Exit with the Escape key.
Fullscreen editing:
Enter using the double arrow on the top right of FCP X's windows or control-shift-F.
Exit using escape or control-shift-F.
This is how it works for me.
Maybe you are looking for
-
Multiple ipods on same computer, ok?
I have 1, want 1 for wife!
-
Users to be created for ART and Workbech
Hi Todd, I have an ART installation where I have created separate unix users for Workbench ( user work1 ) and ART (Work2 ). The product has been installed with a different user ( oracle ). I am facing some issues with this as work2 user is unable to
-
Firefox Sometimes Does Not Recognize Character Set
Firefox cannot decode some characters of english text or symbols and instead of characters appear some kind of codes. Just like you would surf to chinese website without chinese character set. [http://img15.imageshack.us/img15/1638/characterseterror.
-
How can I add the extra fields to a datasource usign "User Exist"?
Hallo guys, I have a quesiton on an extractor. I want to extend fields for an extractor, and the additional fields come from a third table (for the extractor, there is a view which 2 Tabels inner join.) The third table should have LEFT OUTER JOIN rel
-
Help! I lost all my iTune musics...
Hi, My laptop was recently stolen and all my musics were in there as well. I still have my iPod with all the musics in there. I'm afraid once I hook it to my new computer (w/o any music) it's gonna have all the musics in iPod erased. Does anyone know