No Grid View after updating to lightroom 3.6.

I updated to lightroom 3.6, I no longer have grid view when importing photos. How can I fix this problem? I tried to redo the update, but same problem.

Do you see the box in the screenshot, below? Try pushing the button in the lower left corner.
Hal

Similar Messages

Language change after update to Lightroom 3.2! Help asked!

I use Lightroom from the first version and love to work with it. I always work with the English version of it - for several reasons - even when my Windows XP version is in Dutch.
By upgrading to Lightroom 3.2 I selected the English language. After the update my version of Lightroom 3.2 however was in Dutch. I tried to change that to English following the help file, but that does not work
This unwanted change gives me a lot of trouble now as I normally import my pictures with a filename in the date-number format. But the date format in the Dutch version is day-month-year, as I however want to use - and used for over 50.000 pictures!!! - the year-month-day format. I had no trouble with it in Lightroom 3.0. My trouble began after updating to Lightroom 3.2.
Can anyone help me here, as I cannot import pictures I made in the right format now!!!
Ton Soneveldt

The answers is in this thread: http://forums.adobe.com/message/3042985#3042985.

After updating to Lightroom CC 2015, it will not launch when i click on the icon.

After updating to Lightroom CC 2015, it will not launch when I click on the icon. A window gets up: "__crtCreateSymbolicLinkW" not found in DLL "MSVCR110.dll". Same failure occurs when I start Photoshop CC.
LR 5.7.1 Starts without Problem.

Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

Publish to Flikr it fails after update to Lightroom CC?

Hi!
After that I updated to Lightroom CC publish to Flikr fails?
I have tried to reload plugin and remove and re-authorize Flikr account without success.
Any clues?
/Klas

Hi Tim,
I see the "AnalyticReporting" on an existing report with a hyperlink, by doing a right click on the hyprlink and then copy text.
In SP3 it shows up with the following:
https://xxxdevpp.xxxxx.com:8443/AnalyticalReporting/opendoc/logonVintela.do?sDocName=Journal_Line_Details&sType=wid&sWindow=New&appKind=InfoView&lsSBusiness_Unit=CS &lsSPeriod=5&lsSFiscal Year=2010&lsSDeptid=040 &lsSAmount=5867.31&lsSJournal_Line=8832&lsSVoucher_id=1&lsSJournal_Id=HR00434265
The same report in SP2 FP2.2:
https://xxxprod.xxxxxx.com:8443/OpenDocument/opendoc/logonVintela.do?sDocName=Journal_Line_Details&sType=wid&sWindow=New&appKind=InfoView&lsSBusiness_Unit=CS &lsSPeriod=4&lsSFiscal Year=2010&lsSDeptid=040 &lsSAmount=16214.23&lsSJournal_Line=2398&lsSVoucher_id=1&lsSJournal_Id=HR00430868
I have opened a ticket with tech support and so far their only solution is to have us re-write all of our hyperlink formula's, which will affect a lot of reports and formula's. I was hoping you might have a solution..
Thanks,
Randy

After update, some files and folders don't show in icon view

I had an issue where some existing folders did not show their content in icon view after updating to Mavericks from 10.8 (ie 0 items in icon view, 30 items in list view)
I solved it by going to the "view options" for the folder, and changing the "arrange by" settings from "blank" to any thing else. The update did not transfer the arrange by options correctly.

Hi there and welcome to the WD community.
Try to do a system restore on the unit to see if this maked the web file viewer since this should be available on any users dashboard. This link Might help you with the procedure on the unit hope it helps: http://wdc.custhelp.com/app/answers/detail/a_id/10433

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Update from Lightroom 4.2 to 4.3 "Publishing" did not transfer

After updating from Lightroom 4.2 to 4.3, none of the Publishing services such as Flickr were imported. How do I import Publishing information from 4.2 to 4.3? From a previous post, loading a current version of my catalog did fix other issues but did not fix this issue.

Double check your File>Plug-in Manager and make sure the Publishing Service for Flickr is enabled.

Lightroom 5.5 grid view fails to load some images. These do load in develop, then re-appear in grid. Re-installed 5.4 (after deleting 5.5, then emptying trash in 10.9.5) and it now exhibits same behavior. Suggestions?

These same images fail to load in slideshows; "loading" appears without the image ever appearing. I can export these grayed-out images and retrieve the image content in the exported file. Not being able to see all images in grid view is an inconvenience for sure; e.g., I can't review all the contents of a collection before posting it. This behavior didn't occur until I upgraded to 5.5. Now it has migrated back into 5.4, despite having selected 5.5 and emptying trash before the re-install.

Whoa this is happening to me...

Lightroom 4.4: Only 3 thumbnails will display at a time in both Grid view and the Film Strip

Hi. I have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.
Help, please?
With many thanks,
Rita

Alas, it didn't work. I did it twice--the second time rebooting the computer before starting Lightroom. I didn't expect the reboot to make a difference, but I did discover something else in the process: the second time I tried this, I accidentally opened a different catalog--and new photos imported just FINE into that one, thumbnails and all! For one moment I thought the reboot HAD made the difference. However, when I reopened the catalog I actually wanted, the original problem remained. Thumbnails don't load with import, and, when forced, only display up to three at a time.
So the problem seems specific to this catalog.
And yes--thank you for affirming that reinstalling Lightroom wouldn't work, either. (I forgot to mention that's what I had tried first. It didn't help--but it's nice to know it wasn't supposed to.)
Thank you so much for your reply. Do you have any other ideas, please?
With many thanks, truly,
Rita

After the update to Lightroom 5.7, the profile of my lenses have disappeared in the camera calibration, how can I import them again because I gave you mine Extra gespeicher. I'm working on a PC.

After the update to Lightroom 5.7, the profile of my lenses have disappeared in the camera calibration, how can I import them again because I gave you mine Extra gespeicher. I'm working on a PC.

Can we see a screenshot that includes the filename you're viewing with its extension and the camera Make list?
What is almost always the case when someone says they are missing most of their lens profiles is that their current image is not a raw file. It doesn't matter whether you shoot raw, it matters what the current images is. Maybe it is an exported JPG or a Edit-In-whatever result file that's a TIF or PSD or JPG.
Here are examples of the screenshot that I'm asking for:
Raw files show 24 items in the Make list:
While non-raw files have only 9 items + None in the Make list:

How do I show and/or update image info in the Grid view?

Somehow, all the info that was showing in my grid view, in Lightroom 5.6, disappeared. How do I view info for each grid image, on the grid and how do I update or change what info is viewable?

Ctrl/Cmd-J

Update messed up grid view

I updated iTunes a day or two ago, and I've been using the grid view since it came out and had no problems, but now that I updated, whenever I enter anything in the search bar it goes to list view for some reason. To make matters worse when I tried to adjust to this change and would play music from the list view, it would start playing music that wasn't anywhere on the screen or even have any of the words I searched.
So basically searching in grid view changes to list view, which is annoying, and it doesn't even stick to playing just what came up when I searched (when the album finishes it's last song it moves on to whatever song is after that in my overall list of songs).
Is there a way to correct this or should I start looking for ways to downgrade until this is fixed?

Yep, same problem here --- VERY VERY annoying. Hope this is a bug that will be fixed and not some new "functionality" that apple has decided to implement. I would like to downgrade to 8.0, but don't think this is possible once the library files have been updated.
When is itunes going to let you multi-select folders to add to the library too!!
Paul.

This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view. How can I get the icons back on the thumbnail photos of the full gallery that is loaded?

This is a silly question, but I cannot fix it! The icons that appear on my photos after I edit them, have gone away. The only way I can see them is in the Grid view.
How can I get the icons back on the thumbnail photos of the full gallery that is loaded? TIA =)

You have likely dragged the size of the filmstrip thumbnails to a small size that prevents Lightroom from displaying the badges. Using your mouse, mouse over the top line of the filmstrip and then drag it supports to increase the size.

Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

Rotate your phone to landscape.

Updating a view after modifying a table...

Hello,
Here is the scenario.
I have a a table in HANA with 50+ columns of data. I have created both Attribute and Analytical views of that data. These views have been activated and deployed. Now I need to modify my table to add two new columns that I will want to included in my existing Attribute and Analytical views. How can I accomplish this? It seems that when I modify my table, the views in HANA studio do not have the ability to be updated. It seems I have to re-create my voews from scratch to now include my two new columns. Hopefully I am missing something simple.
Thanks in advance!

Hi Matt, no way you need to recreate your views after a DDL change on the underlying tables.
When the table structure changes, you usually need to close any information view editors on the model in question and then reopen the model for editing after the change, but otherwise should be fine. I have done this many times.
What revision are you working on? Can you give the exact sequence of steps?
Regards,
Justin

No Grid View after updating to lightroom 3.6.

Similar Messages

Maybe you are looking for