No GTS block during delivery even country removed from licence

Hi,
We are using GTS 7.2.
When we create the order and if we remove the country from License still it allows to create the delivery and PGI.
During Delivery and PGI the GTS check should happen again and that is happening but it is taking the same license although the country is
already removed from it and delivery is getting posted.
We are missing any configuration here?.
thanks and regards
Rev

Hi Rev,
Although it will be really great if you could elaborate the whole scenario in detail as to where you removed Country setting and other things as well.
But as a first note, it seems that you want a  delivery license re-check. For that , in the SPRO-->Compliance Management-->Legal control settings area, you could check if the Legal Control re-check should happen again and how it should happen.
Secondly, you can check for the related setting at the Item Category Activation level as well in SAP GTS system's General Customizing settings area.
If you are using a new license for the delivery and feeling confused why it is not getting picked for the Delivery legal control check, then please check the Legal Control area in the Document Log to find out how the license is being determined and why not the desired license is being picked.
Regards,
Aman

Similar Messages

  • Country removed from subscription list

    I was just wondering why Sierra Leone was removed from the subscription list. Sierra Leone is the only country that I call using skype, but there are cheaper ways to call if skype no longer provides that subscription. Skype's losing lots of business. Not just from me. From Peace corps families nation wide!

    I must not be explaining this very well, and I apologize for that.
    These are time sheets we're working with, so each user needs a certain set of people to approve and review his/her time sheets. The workflow we have running on each time sheet created reads which department the user is in, matches them with the row that
    contains the field "department" that matches their department, and gives permission to all of the users in the remaining fields TS Approvers and TS Reviewers. If I update these fields at all, the new users in these fields get permissions for that department's
    time sheets, but the people I removed from these fields do not stop getting permissions. It's as if there is a cached copy of the list which is being used by the workflow to assign permissions. This list will fluctuate, so it is not a viable solution to keep
    running powershell scripts to remove people from each of these items after they have been removed from the list.

  • Adapter light stays on even after removing from MacBook Pro

    Hi,
    I have a MacBook Pro. I noticed something odd last night. When I remove the adapter from the MacBook Pro (you know, the magnetic end that attaches to the MacBook Pro), the light on the adapter still stays green/on. I actually have to unplug the adapter from the wall outlet to make the light turn off. This never happened before.
    Has anyone seen this before? Any advice?
    Thanks.

    I think that the light is controlled by the middle pin in the connector. Check it very carefully with a magnifying glass to see if any of the pins are bent or if there is any metalic dust in there.

  • HT5621 Steps to change the primary email address for Apple ID, want to use alternative email (even after removed from lisetd mail addresses it will not allow me. current Apple ID mail address does no longer exist therefore changing required

    apple ID does not allow me to change primary listed email address, this address does no longer exist and now need to get a secendary listed email address to become primery.

    I had a similar problem, which prevented me changing my personal data on iCloud/apple etc. I found the answer on the apple web-site, "appleid.apple.com".
    This site lets you change your primary country, and so lets you use the app store.

  • IPad disabled.  Can't restore even after removed from FindMyPhone.  Still getting message to remove from FindMyPhone when try to restore.  Help!

    My iPad indicates that it is disabled.  When I try to backup from my PC, it tells me to disable FindMyPhone.  I removed the device from FindMyPhone (couldn't see how to turn it off in iCloud) but, when I return to iTunes, it continues to tell me to turnoff FindMyPhone.  I've verified the iPad isn't showing on FindMyPhone anymore.  What do I do to get into my iPad?  Please help!

    Hi, leahbrbus.  
    Thank you for visiting Apple Support Communities.  
    Here are the steps that I would recommend going through when experiencing this issue.  
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Cheers,
    Jason H.

  • Delivery created even GTS block

    Hi All,
    I have created sales order with 2 materials,while saving the sales order system shows GTS block pop up,when i try to create delivery system allow me to created delivery,if we can see the below screen in the two materials one product has no GTS block and 2nd material have GTS block ( legal control),can any one please light on this, what should be done to prevent to create subsequent doc in this case
    Regards,
    Sravan

    Hello
    Copy control level you need to ensure item level GTS relevant routine in ECC, whether you assigned, .

  • Automating Goods issue during Delivery creation

    Hi all,
    We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
    We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
    But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
    The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
    I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
    Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
    Thanks,
    Packia

    Dear Siva,
    As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
    Please let me summarize, I am really desparate here:
    This is only IM related, Not WM.
    Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
    Issue is not Aut. PGI.
    VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
    In the deliveries of correct processed shipping points  I do not find any picking output type.
    Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
    There is no picking block active.
    PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
    Can you please try to help me out?
    Tnx & regards,
    Chris

  • GTS block for return purchase order

    Hi,
    Our ERP system is integrated with GTS system. After creating a return purchase order in ME21N the order is blocked on 'Sanctioned Party List Screening' and 'Legal Control'. However, it is still allowing to create return delivery with movement type 161 in VL10B even if the GTS block is not released.
    We need to build control to stop allowing to create return delivery if the order is blocked in GTS. Is there any standard way of controlling this or we have to custom develop it? Kindly guide me on how to achieve this.
    Thank you,
    Ranjith

    Hi,
    VL10B- is the PO due for delivery.
    Find the standard process for VL10B
    Stock transport order is also a  Purchse order type only When you do STO via SD Route (via delivery.picking, pgi etc) then Shipping tab must appear in your PO Then only it is possible to do via SD Route For shipping tab to appear in PO there are some necessary configurations to be done in SPRO This is done under img- -purchasing- -set up STO 1.Define shipping data for plants 2.Create checking rule 3. Define  checking rule 4.Assign delivery type and checking rule 5.Assign doc type,one step procedure and under delivery tolerance These five are important activities Enclosing here with a model settings study this and understand and then configuration will be more easy Sales area 0003, 04, 21 plant is 1002 Sales area 0004, 05, 21 plant is ABCD If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned In- -mm- -purchase order- --define shipping data for plants Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21.
    Ashish

  • Can't delete a file displayed in ListView ("File in use") even after removing it from window.

    I have a ListView displaying a collection of icons. The user can then select different icons (checkboxes) to do things like Copy or Delete.
    Problem is, when I try to delete the actual file from the disk, I get an error telling me the file is "in use" ("vshost.exe", the VS runtime during testing).
    I thought maybe it was because it still appeared in the window and was still in the ImageList, but even after removing it from both locations, I still get the error. My code:
    Dim intCnt As Integer = 0
    Do
    ImageList2.Images.RemoveAt(intIconsChecked(intCnt)) ' Remove from collection.
    lsvCollection.Items.RemoveAt(intIconsChecked(intCnt)) ' Remove from ListView window.
    FileIO.FileSystem.DeleteFile(strIconPath & "\Icon" & Format(intCnt + 1, "00") & ".rsc") ' "+1" b/c Icons start with "01".
    FileIO.FileSystem.DeleteFile(strIconPath & "\Icon" & Format(intCnt + 1, "00") & ".png") ' "In use" Error here.
    ".rsc" deletes just fine, so I know I'm deleting the correct file. Why does VS still think the file is still "in use"?
    Thx

    Mugsy,
    Consider this as food for thought, even if you don't use it.
    If you set it up right then you can control how it works. A reference is a reference and any left behind will cause you grief down the road when you try to delete things.
    As an example, a simple class follows. It does *not* implement IDispose, although it does have a private shared Dispose method in it:
    Public Class MyImages
    Private _bmp As Bitmap
    Private _name As String
    Private _sourceFilePath As String
    Private Sub New(ByVal bmp As Bitmap, _
    ByVal name As String, _
    ByVal filePath As String)
    _bmp = bmp
    _sourceFilePath = filePath.Trim
    _name = name.Trim
    End Sub
    Public ReadOnly Property Bmp As Bitmap
    Get
    Return _bmp
    End Get
    End Property
    Public ReadOnly Property Name As String
    Get
    Return _name
    End Get
    End Property
    Public ReadOnly Property SourceFilePath As String
    Get
    Return _sourceFilePath
    End Get
    End Property
    Public Shared Sub AddNew(ByRef miList As List(Of MyImages), _
    ByVal imageFilePath As String)
    Try
    If miList Is Nothing Then
    Throw New ArgumentNullException("The collection of MyImages cannot be null.")
    ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
    Throw New ArgumentException("The file path of the image cannot be null or empty.")
    ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
    Throw New IO.FileNotFoundException("The file path of the image could not be located.")
    Else
    ' Should do validation here that the file
    ' is actually an image but I'll not do this
    ' here...
    Dim thisBMP As Bitmap = New Bitmap(imageFilePath)
    miList.Add(New MyImages(thisBMP, GetFileNameWithoutExtension(imageFilePath), imageFilePath))
    End If
    Catch ex As Exception
    Throw
    End Try
    End Sub
    Public Shared Sub AddNew(ByRef miList As List(Of MyImages), _
    ByVal imageFilePath As String, _
    ByVal imageName As String)
    Try
    If miList Is Nothing Then
    Throw New ArgumentNullException("The collection of MyImages cannot be null.")
    ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
    Throw New ArgumentException("The file path of the image cannot be null or empty.")
    ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
    Throw New IO.FileNotFoundException("The file path of the image could not be located.")
    ElseIf String.IsNullOrEmpty(imageName) OrElse imageName.Trim = "" Then
    Throw New ArgumentException("The name of this image cannot be null or empty.")
    Else
    ' Should do validation here that the file
    ' is actually an image but I'll not do this
    ' here...
    Dim thisBMP As Bitmap = New Bitmap(imageFilePath)
    miList.Add(New MyImages(thisBMP, imageName, imageFilePath))
    End If
    Catch ex As Exception
    Throw
    End Try
    End Sub
    Public Shared Sub Remove(ByRef miList As List(Of MyImages), _
    ByVal imageFilePath As String, _
    Optional ByVal removeFilePathAlso As Boolean = False)
    Try
    If miList Is Nothing Then
    Throw New ArgumentNullException("The collection of MyImages cannot be null.")
    ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
    Throw New ArgumentException("The file path of the image cannot be null or empty.")
    ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
    Throw New IO.FileNotFoundException("The file path of the image could not be located.")
    Else
    Dim findInstance As System.Collections.Generic.IEnumerable(Of MyImages) = _
    From mi As MyImages In miList _
    Where mi.SourceFilePath = imageFilePath
    If findInstance.Count <> 1 Then
    Throw New ArgumentException("The instance of MyImages specified by the" & vbCrLf & _
    "image file path is not in the collection.")
    Else
    Dispose(findInstance.First)
    If removeFilePathAlso Then
    My.Computer.FileSystem.DeleteFile(findInstance.First.SourceFilePath)
    End If
    miList.Remove(findInstance.First)
    End If
    End If
    Catch ex As Exception
    Throw
    End Try
    End Sub
    Private Shared Sub Dispose(ByVal instance As MyImages)
    If instance IsNot Nothing AndAlso instance._bmp IsNot Nothing Then
    instance._bmp.Dispose()
    instance._bmp = Nothing
    End If
    End Sub
    End Class
    When you look through that, look specifically at the "Remove" method and in particular, look at the order in which things are done. That's the critical part in this.
    I tested it with a simple form:
    Two buttons, a checkbox, and a picturebox. I also copied a small folder full of image files to my desktop since I'll be deleting a file from it. Following is the code for Form1:
    Option Strict On
    Option Explicit On
    Option Infer Off
    Imports System.IO.Path
    Public Class Form1
    Private miList As New List(Of MyImages)
    Private Sub Form1_Load(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) _
    Handles MyBase.Load
    Dim desktop As String = _
    My.Computer.FileSystem.SpecialDirectories.Desktop
    Dim imgFolder As String = _
    Combine(desktop, "Images")
    PictureBox1.BorderStyle = BorderStyle.FixedSingle
    For Each imgFilePath As String In My.Computer.FileSystem.GetFiles(imgFolder)
    MyImages.AddNew(miList, imgFilePath)
    Next
    btn_RemoveFirstImage.Enabled = False
    CheckBox_RemoveSourcePath.Enabled = False
    End Sub
    Private Sub btn_ShowFirstImage_Click(sender As System.Object, _
    e As System.EventArgs) _
    Handles btn_ShowFirstImage.Click
    Try
    If miList.Count >= 1 Then
    With PictureBox1
    .SizeMode = PictureBoxSizeMode.Zoom
    .Image = miList(0).Bmp
    End With
    btn_RemoveFirstImage.Enabled = True
    CheckBox_RemoveSourcePath.Enabled = True
    End If
    Catch ex As Exception
    MessageBox.Show(String.Format("An exception was thrown:{0}{0}{1}", vbCrLf, ex.Message), _
    "Exception", MessageBoxButtons.OK, MessageBoxIcon.Warning)
    End Try
    End Sub
    Private Sub btn_RemoveFirstImage_Click(sender As System.Object, _
    e As System.EventArgs) _
    Handles btn_RemoveFirstImage.Click
    Try
    If miList.Count >= 1 Then
    MyImages.Remove(miList, miList(0).SourceFilePath, CheckBox_RemoveSourcePath.Checked)
    End If
    PictureBox1.Image = Nothing
    btn_RemoveFirstImage.Enabled = True
    CheckBox_RemoveSourcePath.Enabled = True
    Catch ex As Exception
    MessageBox.Show(String.Format("An exception was thrown:{0}{0}{1}", vbCrLf, ex.Message), _
    "Exception", MessageBoxButtons.OK, MessageBoxIcon.Warning)
    End Try
    End Sub
    End Class
    Running it is straightforward:
    Now when I click to show the first one:
    A different image is shown because that first one no longer exists - either in the collection or in the folder.
    Closing/disposing all references is the key and the order matters.
    Something to consider the next time around. :)
    Still lost in code, just at a little higher level.

  • Release Orders Blocked for Delivery

    Hello Experts!!
    We have V.23, release orders blocked for billing.. is there a similar transaction where we can release orders blocked for delivery??
    Help is greatly appreciated.

    Hello Carla,
    Yes in the T-code "V.23", you can release the billing block for SALES ORDER in one single click. While releasing the delivery block for the Sales order the following T-code are useful:
    1. VDBLOCK
    2. V.14
    3. VA14L
    When you are using these T-codes, you get the list of all the Sales order which are blocked for Delivery. Then you can select the document for which you want to remove the delivery block and do the required updation.
    Regards,
    SARTHAK

  • New planned goods issue date during delivery creation due to changed route

    Hello All,
    I have defined 2 routes with different values for transit time and transporation lead times. I have configured routes such that in order creation - route A is determined and while delivery creation due to weight group - delivery B is determined.
    Now for Route A i have maintained transit time of 3 days and Transportation lead time of 4 days and for Route B it is 1 day each.
    Delivery scheduling is active for the order type.
    Now when i create the order with a delivery date of say 05/24/2010 then (route A with transit time of 3 days) is determined and the planned goods issue date of 05/21/2010 is in the order.
    Now while creating delivery (Route B which has transit time 1 day) is determined due to the weight group. But the planned goods issue date is still the same 05/21/2010 as in order.
    I am assuming that since the route B has a route of 1 day so the planned goods issue date should be re-determined to 05/23/2010? IS there no scheduling done during delivery creation even though route and subsequently transit time has changed?
    Please let me know the answer to this...
    Thanks
    Shobhit

    Hi ,
    You can use TA - MASS . Enter object type - BUS2032(for sales orders) on initial screen and select sales item data.
    Next screen enter selection fields like sales order no and items. After giving order no and item range , execute and enter all new values for any item data fields. After pressing button "carry out mass change", don't forget to press save button.

  • Sales order is blocked for Delivery-ZH Cost estimate Req

    Hi experts,
    When I am saving the sales order I am getting the informative message standard cost estimate for material xxxx is missing. when i am creating delivery with reference to sales order  it is not allowing me to do delivery it is showing that Sales order is blocked for Delivery-ZH Cost estimate Req( in  a log). Can you pls let me know what configuration I have to check.
    Regards,
    Sunina Agarwal

    hello, friend.
    it looks like product costing has been activated in your environment.  if such is the case, you would have to coordinate with your FICO consultant, and they have to make the necessary standard cost estimates.
    please also check if the cost estimates are part of the incompletion procedures.  if it is, you would not be able to bill the transaction even if this is taken out of the incompleteness procedure.
    regards.

  • Payment Block Removal from VA01

    HI...Experts
    Payment Block Removal from VA01
    I have assigned Deliver block at Sales document level
    but...... the requirement is that while processing sales order the creation person should not remove the same before processing delivery(it should be disable mode) 
    is there any soluation???

    HI Kiran..
    I real time... not all the users will be having the authorization to remove the block in sales order... as sap is having standard functionalities (Like User Exits) in place to restrict the user profiles and their authorizations..
    Hope this helps
    Thanks,
    Safeer Rahman

  • Order blocked for delivery as a result of credit check - VL060

    Dear Experts,
    Credit Management is active in the Process.
    Every time I try to create Delivery Document including Returns Delivery the following error is displayed "Order blocked for delivery as a result of credit check"
    I will release the document by using Tcode VKM3.
    Though Credit Limits are maintained for Customer in FD32 and credit Exposure has not exceeded the Credit Limits the Delivery Document creation is bloced.
    How to solve this issue.
    Regards
    Hari

    Hi Prasanth,
    Checked both the areas i.e.
    In VOV8,  the field Delivery block is Blank and
    In VOV7 for Returns item category credit active is unticked.
    Even while doing standard delivery system is blocking for creating Delivery, which needs to be released using VKM3 Transaction. I have checked for Item category TAN where the credit active is checked.
    Please suggest solution for both Standard and Reurns Delivery Block issue.
    regards
    Hari

  • Order blocked for delivery as a result of credit check

    Hell SAP Experts,
    A Order is blocked for delivery as a result of credit check.
    I have RELEASED it through the TCode- VKM3. But still the Order's over all credit status is ‘B’   (Credit check was executed ,document NOT OK).
    I have checked if the Customer is BLOCKED for Delivery in VD05,but it is not.
    Is there any other Place where I need to RELEASE such Order from  Credit check?
    Can anyone help me to remove the Blocked order.
    Appreciating your quick reply.
    Thanks in advance ,
    Umesh Karane

    I have RELEASED it through the TCode- VKM3. But still the Order's over all credit status is ‘B’   (Credit check was executed ,document NOT OK).
    Over all status B means still the block was not released in your attempt of VKM3. Goto VA02 sales document header-status you will find credit status as blocked.
    if the document is released system shows as "D" so please try to release the document once again properly with VKM3, apart from this t code you can also try with VKM1 or VKM4.
    After release check once again the status it should be D
    thanks,
    Srinu.

Maybe you are looking for