No hardware buttons working (bar home button)
2010 iPod Touch
My lock button will not lock my device (nothing happens), and the hardware volume buttons also do not respond. The home button works fine though and am having no further problems. Just noticed this today.
I can't reboot either (for obvious reasons as the wake button is dead) so i will have to bleed the battery.
Anyone know of a fix or similar problems? Sorry if i have over sighted any previous threads in advance.
Cheers
One of the various problems I'm having with iOS 5.0.1 is my home button is basically dead right now. My lock & volume buttons work fine... for now. I haven't heard of any permanent/temporary fixes so far. All I can say is wait for apple to release another update that will most likely cause us further problems. Or call apple. That's what I'm doing tomorrow
Similar Messages
-
please someone help me now.
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem besides the Home button.
Apple Retail Store - Genius Bar -
my iphone 4 stopped working suddenly....it wouldnt charge or anything...i was told to push the on button and the home button at the same time and it came back on.
is this a fault with the iphone????
i cant have my phone switching off randomly...any help please...thankyou.sometimes it happens, a hard reset will sometimes solve the issue.
If the issue starts happening more often, I would consider restoring the device to factory settings to install clean software. If the issue still persists after that, the device might need a hardware repair.
More info on backing up and restoring the software: http://support.apple.com/kb/HT4137
Good luck
Stijn -
my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead
If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you. -
i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back, and i tried to press the power button with the home button but it wont work
fadijaber wrote:
i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back,
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first... -
So , It was Late At Night And I Put My Ipad On The Chager , And When I Woke Up It Is Not Turning On , Or It Is Not Charging , I Tried To Reset It By Holding The lock button And The Home Button But It Is Not Working
Hello ipadisbroken,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario -
My IPod 5 shut down and wont turn back on. people say to hold down home and lock button but my home button doesn't work. what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Right now, I'm stuck in the settings, when I press the sleep/wake button or the home button it doesnt let me. But is not frozen or any thing just the buttons. help me please!!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.
My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.
-
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
I can't shut down my ipad2 even when i press and hold the sleep/wake button and the home button at the same time.
If the screen appears to be zoomed in, then does tapping the screen with three fingers zoom you back out ? When zoom is on you should also be able to scroll around the screen using three fingers on the screen.
If you are seeing the keypad then that should be for the iPad's passcode, I assume that you have one set ? If the iPad is disabled then I wouldn't expect the keypad to show. -
my phone is frozen and wont respond to holding the sleep/wake button and the home button how do i unfreeze it?
See Here for
Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?
Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling -
I have an iPhone 3Gs and it has froze on the apple logo. I have held the on/off button and the home button together but the apple logo keeps reappearing. What Can I Do?
Try plugging it into your computer, see if that clears it up or if you can perform a restore from your latest backup.
Maybe you are looking for
-
How to enable ping service on java-stack only system
I have installed SAP NetWeaver 7.0 - Java Trial on local host. How can you activate the ping service there? It should work under "http://localhost:50000/sap/bc/ping" (I know how to activate it with transaction SICF in an abap system, but I have java-
-
Correct display resolution no longer showing after 10.5.7 update
Hi, The native resolution for my display (HP w2207h) no longer shows up in the displays preference pane. It should be 1680x1050 but the nearest resolutions showing are 1600x900 or 1920x1080 which both look pants, It's connected via DVI-HDMI cable and
-
K7N2 Freezing(must read this)
every freezing problem is now resolved i try lots of program & K7N2 motherboard or 128bit memory argitecture ,something on this board cant handle all program(i think every program must have somekind of update becose of memory arcitecture or somethi
-
Accessing old software purchased
I purchased CS6 in 2012 and have recently purchased a new computer that I need to put the software on. How do I access this download again? It is missing from my Adobe account.
-
How to respond to physical block corruption??
Hi, all. As far as I know, there are two types of block corruption. 1. logical block corruption 2. physical block corruption In case of logical block corruption, there are a few method of how to take care of it. such as BMR with rman, media recovery,