No HD presets for Quicktime?

Hello all,
I just upgraded from CS3 to CS4 and cannot seem to locate HD presets for QuickTime. My original production is in 1280 by 720. Just cant seem to locate any HD resolutions for the mov. file extension. All I get is widescreen for DV. It seemed I had a lot more presets when in CS3.
Thanks for any advice.
Michael.

Are you talking about sequence settings or export settings?
Cheers
Eddie

Similar Messages

Is it possible to create a new preset for Export/Quicktime Conversion ?

Hi,
I was wondering if there is a way to make a new export preset for the Export with Quicktime Conversion, in FCE HD 3.5
I am working on preparing a file for YouTube, and finding that some of the video effects render differently when exported, so I am having to render a couple of tests, but with YouTube's new 640x360 16:9 format, there is no easy way to do this other than checking the settings at each export. If one could make a new preset, it would be much easier. Any ideas?
Thanks,
t

thankyousir.
I think that Apple could add this, easily, as a feature to what, essentially, is QT Pro, and its embedded brother in FCE. Apple could also release a tiny update for QT including the new YouTube format... I haven't checked if iMovie knows about this new resolution, though it does upload directly to the tube itself.
Thanks for your time,
T

Unable To Use DVDSP4 Presets for HD-DVD in the H.264 Format

I recently prepared a 23 minute slide show using Fotomagico from high resolution Hasselblad slides scanned in at 1200 dpi. Within Fotomagico I rendered the Fotomagico slide show to Apple ProRes 422 HQ, took it into Final Cut Pro 6.03 and added an intro and closing section. I then sent this to Compressor and selected the 30 minute HD-DVD preset which uses mpeg2. All went fine with the encoding to mpeg2 and I got a successful build and format out of DVDSP4 after importing the resulting .m2v file into DVDSP4. However, while the disk plays back fine in my Mac Pro it plays back with stuttering (audio and video) on my Toshiba HD-A2 HD-DVD player. I used a Verbatim Datalife DVD+R, but several other discs from other manufactuers including a DVD-R disc showed the same problem.
Please note that I have the latest firmware on my Toshiba HD-A2 and I have successfully burned RL HD-DVD discs using my PC and Windows software (Ulead's DVD Movie Factory 6+) which play fine without stuttering on my HD-A2.
I then decided to send the project to Compressor and use the 60 minute HD-DVD preset that encodes to H.264. Once again Compressor successfully executed the encode of my 23 minute slide show and it plays fine in QuickTime or MPEG StreamClip. However, every time I try and import this .mov file encoded in H.264 using the Compressor preset for HD-DVD into DVDSP4, DVDSP4 brings it in to the assets folder, but after a couple of seconds DVDSP4 crashes. Using console I get a message that DVDSP4 quit unexpectedly due to a "segmentation fault".
I also tried to take the ProRes Fotomagic project in Final Cut Pro 6.02 and send it out with Quicktime Conversion using the H.264 codec. Again I have a file that plays fine in QT, but when I try and import this .mov file into DVDSP4, I get the message "imcompatible format".
In summary, I am completely frustrated after many many hours of work at trying to prepare an HD-DVD on red laser of my slide show in DVDSP4. I cannot figure out what I am doing wrong, and I would be most appreciative of any suggestions anyone may have.
Thanks in advance.
Tom

Am I the only person who has ever tried to use the Presets in Compressor 3 for encoding HD-DVD disks? I would like to use these presets for burning HD-DVD's to standard red laser media as I have done on my PC. With the mpeg2 Preset I can get nothing but stuttering video when played back on my Toshiba HD-A2 and when I use Compressor 3 to encode with either of the H264 presets, the resulting .mov file causes DVDSP4 to crash when I import the file. Has no one else experienced this? Does anyone have any thoughts on addressing these issues other than to go back to working on my PC?
Tom

Exporting HD Sizes for Quicktime and AVI?

Okay, LOVE the new CS4, but have a problem.
For tech notes in case it means anything, I'm shooting with a JVC HD-110, editing M2T files. Everything in THAT respect works perfectly - NOW I even have an FS5 drive so it goes even better - dropping all capture time and processes. The Projects are all set up as HDV, 720p at 24p - basically, everything about the Project is set to HD.
When I choose Quicktime or AVI as the Export format, the only Preset options that come up are DV related. Meaning, SD... And when I have to manually type 1280x720 as the export size (upping the default from 720x480) it even reads "1,280" - not a straight "1280", get it?
The resulting render looks horrible - completely unusable - unless my goal is to simulate the old Fisher Pricer Pixel Camcorder ;-)
How do I Export from Premiere's Timeline to an HD format? Or can I download a set or HD Presets to put in the Export Settings (or something) folder for each codec?
Thank you for your time, and any thoughts-
-Lew

Oh yeah - there's a whole huge list for WMV! MAN you have options there!
No, none of those options are (or seem) available for Quicktime and AVI.
I bounce files back and forth for clients (and myself) for FX work and edits (they prefer the Quicktime Animation codec at 100% - gotta admit, it's beautiful!), and would like to do final output to HD in the end for a project I'm working on right now.
-Lew

Big issue with AME CS6 Additional Presets for ProRes

Hello all,
I have downloaded the "AME CS6 Additional Presets for ProRes" on here : http://www.adobe.com/support/downloads/detail.jsp?ftpID=5411
When i try to select it to export in any of the ProRes format, an error message pop up. Here is a translation of what it is written (original is in french) : "Incompatible video codec detected in the preset. Loading the preset failed" / or for those who understand French : " Codec vidéo incompatible détecté dans la préconfiguration. Le chargement de la préconfiguration a échoué."
I have called Adobe support and they say they can't help me because ProRes is an apple codec/product.
I have called Apple support and they say they can't help me because CS6 is an Adobe product.
Of course they both told that the other one could answer my question.
So in the end they both told me to watch in forums. I was mad about those answers but, i guess I don't have a choice so, if anyone can help me with that issue, I would be very greatfull...
thank you all for your answers.

Ok,
I finally found an answer !
It is very simple in fact but I will give you the tip if you are, like me, not an apple genius :
The preset that you can download on adobe's website can not work if you don't have the ProRes Codecs installed on your computer.
To Install them, download them from apples website and unpack them with "unpackage" a small freeware you can find quite easily on internet. Then you can add the prores codec to library/quicktime/folder.
I just don't understand why they couldn't tell me this morning.
Anyway, hope it will help some !
cheers

MPEG2 component for QuickTime

I have Quicktime Pro and needed to take a .mov and export as an MPEG2. I tried to use MPEG2Works demo version and it told me that I needed the MPEG2 component for Quicktime. So, I bought it. Downloading seemed successful. I am still getting the same error (Do you have MPEG2 Component for QT installed? If not try the conversion again. Also do not use MPEG files as input with encoding preset buttons.) I do not have MPEG2 options in QuickTime either. What have I done wrong? I must have missed something somewhere.
Thanks for you help in advance!

Any software that uses the MPEG-2 Playback Component must be relaunched after its install for the component to be found.
Reading the FAQ page would have told you that the component isn't used to create MPEG-2 files via QuickTime. It is a decoder only.

Itunes is asking for Quicktime Version 7.5.5. or higher before opening

Hi there,
recently I had to reinstall my complete software by using the installation disc that came with my macbook. After reinstalling I updated my itunes-Version to 5.2.2. Afterwards, by clicking on the itunes-Logo in the dock in order to start itunes, I have received the failure notice "Itunes needs quicktime player version 7.5.5. or higher"
I have checked my current quicktime version, it says it is version no. 7.7. (1680.25) in greater letters and below written in smaller letters there's a different version no. saying 7.4.1. (14).
That leaves me with the question, how to find out which quicktime version is correct. And, if no. 7.7. is correct, what can I do about itunes to be able to open the programm again? Thanks in advance for any advice, you can give me.

Run System Profiler. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..."
Check under both Applications and Frameworks for Quicktime. Applications are the actual Player application itself. I believe Frameworks is the underlying system software support. If you see something different there it might be that about which iTunes is complaining. On my computer both say the same, but I'm not having the issue.
I'm guessing here but if you re-installed the system using Archive and Install, your applications were left intact and that's why your Player is 7.7, but all your system software (includingQT framework) was replaced with earlier versions which may be why the you're seeing different versions. iTunes doesn't need the Player, but it does need the underlying QT software.

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

I am trying to reinstall my Quicktime 7 Pro after cleaning out my MacBook OSX 10.5.8 following a hacking. I have Quicktime player and reregistered with the registration code for Quicktime 7 pro and it seems to be successfully registered but not in Appl

Hello everybody. I am trying to reinstall my Quicktime 7 Pro after having my MacBook OSX 10.5.8 cleaned out following a hacking. I have Quicktime player and I reregistered with the purchased registration code for Quicktime 7 pro. It seems to be successfully registered with "Quicktime 7 Pro" appearing under the inserted registration code but it is not showing in Applications folder and I do not know how to access it or what to do. Thanks for reading this. I hope you can help me. Aidan from Dublin, Ireland.

Inapplicable advice removed; misread the OS version.

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD

Is there a way to create a thumbnail for QuickTime videos on a PC? All the videos currently have the same QuickTime logo as there thumbnail.

Is there a way to create a thumbnail for QuickTime videos on a PC? (Windows XP) All the the videos currently have the same QuickTime logo as their thumbnail.

Abdur,
In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
This will require that you navigate to the origin cell by choosing the proper sheet.
Jerry

Is there a way to create a preset for drop shadows?

I'm setting up a template for a new brochure that will need drop shadows on every product that is being placed. Is there a way to save a preset for a drop shadow so I need not have to recreate the shadow every time? Also this is being distributed to many people to work on and effects presets would be hugely beneficial-just not sure if that is possible? Although it is Indesign, and they are usually on the up and up for this kind of thing.
Thanks!
FF

The Eyedropper Tool is a quick way of applying the same drop shadow to many objects
But as peter says object styles is a much simplier way.

How do i find the registration for quicktime pro ?

how do i find the registration for quicktime pro ?

It should be under the Quicktime Player 7 menu, right under 'preferences'.

How to create a preset for computer output of 1024x768?

I just upgraded from Premiere Elements 1.0 (yes, 1! :) ) to PE7. I record user group meetings for my local software developers group. We have screen capture at 1024x768 pixels and audio.
In PE1 I had no trouble bringing this footage in, editing it and exporting it as 1024x768 for viewing online by the members.
However, I can't seem to find anyway to create a project preset for 1024x768. It seems I can only create SD, HD and similar.
When attempting to create a custom preset 90% of the values are pre-filled with settings and I can't change them. I see textboxes for the height and width but I can't change them.
Is this a limitation of PE7? Why in the world can I not create a video any size I want? Without this ability the upgrade is almost useless to me.
Please let me know because I feel like I must just be missing something.
Thanks!
Matt

Hey Steve,
Thanks for the reply.
I did see the 720p preset and this does produce a nice image. The SD preset made the output look muddy and the screen text was unreadable.
That being said, when importing my media into a project on the 720p preset I get the black letterbox bars on the side.
I did render a 10 second test area and changed the output size to 1024x768. I was afraid it would squash the entire video, but much to my surprise it just cropped it. So, while I have to work with the letterboxing I can output an actual 1024x768 video. I was also having a little trouble because I was using File - Export Movie to, well, export my movie. When I tried the Share task, set it to PC and changed the settings this was much easier and produced a much better result.
Thanks for the help!
FYI, I use PE7 to export it as a wmv. I'm playing with Expression Encoder to then encoded this with VC-1 for Silverlight clients.

CS3 How to choose a Codec/extension wrapper and Preset for a project

Goal
To create fanvideos from commercial DVDs for personal fair use.
Potential to use to promote a series in a social media campaign with permission of owner.
Tools on Hand
Three seasons worth of the series ripped from commercial DVD --> .VOB format in TS Folders on my 2008 10.5.8 Mac using MacTheRipper
FFMpegx CODEC pack.
CS3 Premierie Pro with Mac updates that were posted on the Adobe site.
So far I've been able to
I managed to use ffmpegx to convert my .vobs into .mp4s, which I then renamed as .movs to get Premiere to recognize it. I managed to sync my audio with the mp4 encoder (may have been a H264 but not sure by changinge the frame-rate from ntsc film to ntsc.
Problems I've encountered
I had admittedly been experimenting with different codecs and .exts, trying to find optimum quality:size:premiere/iDVD compability, so I had a variety of source footage in my project. For some, I had to readjust the pixel aspect ratio. But when i rendered/exported the final product...everything was squished and incorrect. I had sound syncing issues for some of my trials, too. Before I was trying to make things compatable with iDVD. I no longer care about this and have no intention of burning anything with this project.
I saw things on the internet about using Encore's library of codecs, but couldn't find anything .dll on my computer. I also have no idea how to use any of hte CS3 support software (bridge, extension manager, after affects)
Current steps I'd like to take
I'm starting over and converting my .vob files into something Adobe will recognize (a simple file name change didn't work in this instance). I've read the different file types that Adobe PPro recognizes, but it's come to my attention that it prefers some file types to others. Which extension wrappers are the least likely to cause headaches when trying to edit in Pro?
Out of those possible codecs and extension wrappers that are compatible, which are the best for fitting a lot of quality into a small filesize? I heard good things about H264, but I don't know if the patch I dl'd will be enough to make it Adobe PrePro compatible (and I know there are a few different kinds of h264. the only one i had any success with at all put it an mp4 mpeg container, but didn't end up being anything of a filesize savings compared to the other h264, which ended up being useless). I have about 60 .vobs that are 2 GB big, and don't have an external hard drive yet, so this is a consideration.
How do I choose a preset for my new project? These DVDs were released over the course of 3 years, and they don't all have the same specs in their native format (when I grab the info from DVD player, it's different). Will I have better luck using different seasons if I convert them from .vobs to identical target file types? I guess the better question is, when using 3 different types of files that are wrapped into .vobs, am I better off customizing the target file to match the file information DVD Player gives me for each different season....or trying to find specs that serve all three seasons best and have more uniform files imported into Premiere? Eitherway, how do I know how to pick a Preset? I try keeping a 16:9 or 16:9 DVD in my target files, but does that make it a widescreen project to start? Once I start the project, is it too late to change these settings?
Thank you for helping a newbie. I tried looking around for answers to each problem as I came across them, but eventually I got overwhelmed and threw my hands up, deleting everything. I'm ready to ask for help and have a little patience.
*It's important for me to use free or very affordable 3rd party software, as I am currently unemployed.

You MAY want to think about a product that will read the output from your DVD player and convert to DV AVI
Matt with Grass Valley Canopus in their tech support department stated that the model
110 will suffice for most hobbyist. If a person has a lot of tapes that were played
often the tape stretches and the magnetic coding diminishes. If your goal is to encode
tapes in good shape buy the 110, if you will be encoding old tapes of poor quality buy
the model 300
Both the 110 and 300 are two way devices so you may output back to tape... if you don't
need that, look at the model 55
http://www.grassvalley.com/products/advc55 One Way Only to Computer
http://www.grassvalley.com/products/advc110 for good tapes, or
http://www.grassvalley.com/products/advc300 better with OLD tapes

No HD presets for Quicktime?

Similar Messages

Maybe you are looking for