No HDMI and Thunderbolt- hardware not found

Hi
I've been trying to connect my Macbook Pro to a TV via mini DP adapter and Hdmi cable but without success.
Checking through my system report, it states THUNDERBOLT - No hardware found.
Is that why I can't get to connect to an external display.

A thunderbolt adapter/cable to HDMI should work fine in a Mini DisplayPort.
Look under About this Mac > (More info) > System Report > Graphics & Displays for your graphics devices.
What needs to happen (and often does not when dealing with TV sets) is that the TV set must be paying attention to that HDMI port when the Mac Powers on. The Mac sends a query to the device, "what is your name, and what are your capabilities?" If the device provides it, this information is reflected under Graphics and Displays.
If it is not shown, the System Preferences > Displays > (Detect Displays) Button is supposed to get the Mac to ask again.
Unless/Until that information is reflected under Graphics & Displays, the device will not show a picture.

Similar Messages

My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetim

My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.

If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.

Current server is the coordinator and transaction is not found

Hi,
We're using Weblogic 8.1 SP3. We have a single weblogic domain and 2 clusters in it. EAR1 is deployed in cluster 1 and EAR2 is deployed in cluster 2. EAR2 is compiled and created using j2ee.jar and not weblogic.jar.
We have a MessageDrivenBean which is CMT / Required in EAR1 calls a BMT Stateless Session Bean in EAR2.
A new transaction is begun in the BMT SB method and commit or rollback is called based on exception. A RuntimeException is thrown back to the MDB in case the transaction is rolled back in Bean Managed SB.
Sometimes from the Bean Managed SB the following exception is thrown:
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably rolled back and forgotten already.
     at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
     at com.oakgrovesystems.reactor.frontDesk.EJBFrontDeskBean_1gq9kv_EOImpl_813_WLStub.handleRequest(Unknown Source)
     at com.oakgrovesystems.reactor.requests.ReactorRequest.send(ReactorRequest.java:212)
     at com.oakgrovesystems.reactor.client.EJBReactorProxy.sendRequest(EJBReactorProxy.java:44)
     at com.oakgrovesystems.reactor.client.AbstractReactorProxy.handleRequest(AbstractReactorProxy.java:52)
     at sun.reflect.GeneratedMethodAccessor153.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at tavant.bpm.client.proxy.DynamicFailoverReactorProxy.invoke(DynamicFailoverReactorProxy.java:84)
     at $Proxy11.handleRequest(Unknown Source)
     at tavant.bpm.client.ProcessHome.handleRequest(ProcessHome.java:298)
     at tavant.bpm.client.ProcessHome.startProcess(ProcessHome.java:87)
     at tavant.bpm.client.processor.CreateWorkflowInstance.startProcess(CreateWorkflowInstance.java:70)
     at tavant.bpm.client.processor.CreateWorkflowInstance.invoke(CreateWorkflowInstance.java:51)
     at tavant.bpm.ejb.AsynchronousProcessorMessageBean.onMessage(AsynchronousProcessorMessageBean.java:58)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
This is not consistently reproducible though it happens when server is heavily loaded. When this exception occurs, the transaction in the BMT Session Bean is actually getting committed! The message gets redelivered from the MDB.
What could be the problem?
Regards
Sandhya

I'm seeing a similiar problem on our servers recently and thought I would add my problem as well. We are using Weblogic 8.1; don't know which SP is in production. We have an EAR file with an SB EJB that puts messages in a queue. The EAR is deployed in a cluster along with the queues. The errors below occurred in 3 of the 4 WLS instances in our cluster. This happened during a peak period and lasted for several seconds in Production.
###<Jul 1, 2005 11:18:12 AM EDT> <Warning> <RMI> <exsdxtxeax1x.prod.xxxx.xxx> <ems-04> <ExecuteThread: '12' for queue: 'web
logic.kernel.Default'> <<WLS Kernel>> <> <BEA-080006> <Failed to associate the transaction context with the response while marshall
ing an exception to the client:
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
rolled back and forgotten already..
javax.transaction.TransactionRolledbackException: Current server is the coordinator and transaction is not found. It was probably
rolled back and forgotten already.
at weblogic.transaction.internal.TransactionManagerImpl.sendResponse(Ljava.lang.Object;)Ljava.lang.Object;(TransactionManag
erImpl.java:1438)
at weblogic.rmi.internal.BasicServerRef.associateTxContext(Lweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundRespo
nse;)V(BasicServerRef.java:490)
at weblogic.rmi.internal.BasicServerRef.postInvoke(Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;Lweblogic.rmi.sp
i.InboundRequest;Lweblogic.rmi.spi.OutboundResponse;Ljava.lang.Throwable;)V(Optimized Method)
at weblogic.rmi.internal.BasicServerRef.handleRequest(Lweblogic.rmi.spi.InboundRequest;)V(Optimized Method)
at weblogic.rmi.internal.BasicExecuteRequest.execute(Lweblogic.kernel.ExecuteThread;)V(Optimized Method)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(Optimized Method)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
>

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Hierarchy with HIESID 2 and SVER was not found

Hello Experts,
I am in dire need, as I need to change/add some authorizations.
When selecting a hierarchy authorization to add, I receive the following error:
"The hierarchy with HIESID 2 and SVER was not found"
this happens not only when I want to add an authorizations, but also when looking up existing ones and trying to access the authorization node.
I have searched the forum and the guidelines but unfrtunately I did not find any helpful information.

Found a note that can correct this:
Note 1530624 - RSRHIEDIR_OLAP inconsistency,Deleted entries of INFOAREAHIER

[svn:fx-4.0.0] 14153: Fix getStyle/ setStyle when a module factory is not set and a skin not found RTE.

Revision: 14153
Revision: 14153
Author:   [email protected]
Date:     2010-02-12 14:18:27 -0800 (Fri, 12 Feb 2010)
Log Message:
Fix getStyle/setStyle when a module factory is not set and a skin not found RTE.
QE notes: None.
Doc notes: None.
Bugs: SDK-25376, SDK-25444
Reviewer: Alex
Tests run: checkintests, full Mustella
Is noteworthy for integration: No.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25376
    http://bugs.adobe.com/jira/browse/SDK-25444
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Ski nnableComponent.as

Problem Resolved!
          I found out that I had 'http' instead of 'httpd' in the statement where I
          registered my servlet, SqlServlet.
          Now, I am having difficulty with hot deployment. The server is returning
          error 404.

HT6114 My wifi doesn't work on my macbook air. Says hardware not found help please!!!

Please guide me what to do about the wifi problem. says wifi hardware not found!!!

Try an SMC reset: http://support.apple.com/kb/ht3964
Another option would be to install the Combo Update (yes, again): http://support.apple.com/kb/DL1726
If those don't solve it, take it in for repair.

My iPhone doesn't work on Bluetooth. It turns on but I doesn't Find another device and it's not found by other devices as well. What is the solution

My iPhone's(iOS7.0) Bluetooth connection doesn't work. It turns on but it doesn't Find another device and it's not found by other devices as well. What is the solution?

Supported bluetooth profiles http://support.apple.com/kb/ht3647

How do I verify my email account for Icloud if I try to open the link and it marks "not found", How do I verify my email account for Icloud if I try to open the link and it marks "not found"

How do I verify my email account for Icloud if I try to open the link and it marks "not found"

Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

Package javafx.json and javafx.gui not found

hi ,
getting package javafx.json and javafx.gui not found errors.... have the package names changed ,, if so pls tell new names of these packages ......

Hi Josh,
thanks for your quick reply. I agree that javafx.gui has been replaced by javafx.scene package.
But can't find reference to javafx.json package.
Saw its use on http://blogs.sun.com/clarkeman/entry/javafx_script_and_json_weather .
I'm trying to pass a json from my java code and use it in my javafx code. But in javafx code it comes as plain string

MacBook - the Airport hardware not found issue

Hi,
has anyone here had a similar 'Airport not found' issue?
At random start ups, connection fails and I get the above message from the Network pane. Then I have to reboot the Mac to get an Airport connection again. And when I do I'm asked if it's ok for system prefs to join the wireless networks on my list - everytime.
Another thing that seems to fix it is to do a software update from Apple.
I tried trashing prefs, zapping, resetting psu and what else, but a malfunction pattern didn't emerge. Sometime it works sometime it doesn't
Because it's intermittent I'm struggling to understand if it's an hardware issue (airport failing) or something else.
I'll take to an apple centre soon, but anyone here has had a similar issue?
thanks already
val

cheers, I did try that. No problem found... I guess I should take it as good news

HDMI and DVI port not working on 880GMA-E35

Hello,
I want to use the HDMI port of my 880GMA-35, but the monitor is not getting a signal. I know that the board has two jumpers to switch between the DVI and the HDMI port. In the delivery state the jumper is set to HDMI, but I don't get a signal. There is also no signal, if I switch the jumper to the DVI pins. I have tested this setup which different cables (HDMI and DVI) and two different monitors.
After this test I get a guarantee replacement of the board. The new board is also not working with HDMI or DVI. The VGA port of the first board was working as supposed and I don't see any Bios settings to activate the monitor ports.
Are there any suggestions to solve my problem?
Thanks in advance and kindly regards
Daniel

>>Posting Guide<<
please read the above guide and follow it!
firstly we need alot more information to what componants you have in your system?
eg see my signature bellow this post for the type of information we need! main parts are:
motherboard
CPU
RAM
PSU (include the +12v ampage ratings)

"Error Result code = -43" AND "Audio file not found"

In Garageband I was trying to click Join, but kept getting "Error Result code = -43"
What does this mean?
Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

mcgregorsgal wrote:
so do I have to basically start over?
for that one recording, it looks like it.
the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

TS1717 Getting two error messages when trying to access I Tunes on my Windows 7 Computer: Windows Error 126 and MSVCR80.dll not found

Having difficulty accessing I Tunes on my Windows 7 Vista.
Error messages are two fold:
1. MSVCR80.dll not found. Reinstall may help correct prob.
2. Windows Error 126.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Trying to track a package on FedEx website and get "Framework Not Found" error message

Either by clicking on the email from FedEx and launching Firefox or by opening the FedEx website and entering the tracking number, I get "Framework not found" error and the search stops. It worked with previous Firefox versions but not with the new 4.0.1 version. Any suggestions?

I tried it with firefox and chrome and have the problem in both browsers, so it is not browser specific.

No HDMI and Thunderbolt- hardware not found

Similar Messages

Maybe you are looking for