No HDMI Audio, Failed to Play Test Tone, Can't Change Default Playback Device

Hello, I'm experiencing some real trouble with my HP Pavilion dv6-2160us (with the i3-330M, no dedicated graphics) Windows 7-64 bit, SP1 PC, and I would greatly appreciate some assistance.
I've created a new thread because, despite the fact that many other people have experienced a problem similar to this and have posted what worked for them, nothing has worked for me.
The Problem(s):
My main problem is that I cannot get any audio to play from my PC to my HDMI HDTV.
When I plug my HDMI cable into my PC and TV, the TV is recognized in Playback Devices, but nothing can play to it.
When I try to test the TV in playback devices, I get a "Failed to play test tone" error.
Additionally, I'd like to mention some other odd behavior that I think may be a part of the main problem.
In Playback Devices, I cannot change anything. I can't disable or enable a device, I can't set default playback or communication devices, and I can't save changes inside device properties. Every time I try to change something, like the default playback device, nothing happens or the changes are immediately reversed.
The Question:
How can I get audio to play over HDMI on my PC (It's not a problem with the TV, my other HP machines play audio over HDMI to it just fine.)?
What I've Tried:
I have tried:
Changing the default playback devices, which I'm unable to do
Running the Windows 7 Audio Playback troubleshooters from within a clean boot state
Uninstalling and reinstalling the Intel(R) Display Audio driver
Uninstalling and reinstalling the IDT High Definition Audio CODEC
Uninstalling the IDT PC Audio program from Programs and Features
Disabling the IDT High Definition Audio CODEC
Nothing has worked.
The drivers I have are the latest issued by HP
How can I get this working? I would really appreciate some assistance.
I'm at the point where I'm ready to try pretty technically-involved suggestions, so, please feel free to post those.
Your expertise is greatly appreciated.
Thanks.

Hi @dskrobow,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you are connecting a HDTV but you do not have any audio.
Here are two links that may help.
HP Notebook PCs - Using Two or More Video Displays in Windows 7
HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues.
Have you ran the HP Support Assistant ?
Have you ran the Windows troubleshooter?
If you appreciate my responding please click the kudos button below to say thanks.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Sound has stopped working; failed to play test tone; format not supported by the device (Vista x64 Ultimate)

I can no longer hear any sound from my speakers/headphones. This happened suddenly yesterday without any hardware changes or noticeable software updates.
-- The sound is not muted and the volume is set to full.
-- In the device manager, my SigmaTel HD Audio device has no warnings or errors.
-- I can't find any related messages in the Event Viewer.
-- The primary audio device is selected as the default for playback. The mixer shows my media player as being mixed properly to the device.
-- In the sound control panel, under Playback > Speakers/Headphones > Properties > Advanced:
- I get the error message "failed to play test tone" when I try to Test my Default Format (dvd quality)
- I get the error message "format not supported by the device" when I try to change my Default Format
-- Note that unlike others who have similar problems, I'm not joined to a domain
I've tried
* rebooting
* uninstalling and reinstalling the driver for the sound card
* "disable all enhancements" in the sound control panel
(http://social.msdn.microsoft.com/forums/en-US/windowspro-audiodevelopment/thread/b09e43ba-3ffa-4a45-9593-8eee686f124a/)
* looking in the registry for some registry key (not found)
(http://www.consumingexperience.com/2009/04/failed-to-play-test-tone-no-sound-on.html)
Computer details
Dell XPS M1530
Vista Ultimate x64 SP1 with current updates
SigmaTel driver version 6.10.0.5866
**Update**
I followed the following steps:
    * using regedit, go to HKLM\System\CurrentControlSet\Control\WMI\AutoLogger\Audio and change the “Start” value from 0 to 1.
    * Reboot the machine
    * Try to play an audio file.
    * Post a link to the generated log file which you can find in: %WINDIR%\system32\LogFiles\Audio
but don't know where to post the resulting AudioSrv.Evm.001 file. It's also not human readable and I can't find what utility parses it for reading.
**Another update**
Still can't read the EVM. logparser 2.2 can't parse it.
Found this thread which interested me but isn't applicable to x64 (I think):
http://social.msdn.microsoft.com/Forums/en-US/mediafoundationdevelopment/thread/94cdc662-e974-43de-8feb-6eb156924347
**YAU**
Dell confirms it's an OS issue after troubleshooting with me for a couple of hours (wow)
Is there a way to look at this EVM file _without_ installing the Windows Driver Kit??

Hi,
Thanks for posting in Microsoft TechNet Windows Vista Forum.
Upon your description, I see that you have done a lot of research and tests. Unfortunately, none of these troubleshooting works.
Based on my experience, this issue related to "failed to play test tone" can be related to several reasons. It also includes hardware defect. I am confusing why Dell confirms that the issue is related to Operating System. Could you let me know what operation Dell had troubleshot with you?
Meanwhile, here I just provide more troubleshooting except what you performed. If it doesn't work, I may also need to recommend that you contact Dell for support.
1. Microsoft has released a Hotfix to troubleshoot related to "Failed to play test tone".
http://support.microsoft.com/kb/930883
2. Make sure that these services are started.
Windows Audio
Multimedia Class Scheduler
Remote Procedure Call
Windows Audio Endpoint Builder
3. I noticed that this issue occurred not long ago, I may need to suggest that you perform a System Restore to the previous restore point when the computer without any problem.
System Restore
==============
1)     Please click on Start and choose All Programs, Accessories, System Tools, and then Windows Backup.
2)     Click Restore on the left pane.
3)     Choose Basic Restore.
4)     Follow the wizard and click Next.
5)     If you would like to restore everything in the backup, we can check the box “Restore everything in this backup” on the top of the window.
6)     We can also browse and choose certain files and folders to restore. Then, click Next.
7)     Then choose the folder to save the recovered files and click Next.
8)     When we see a “Restore is complete!” message, click Finish.
Meanwhile, as I know, I'm afraid that there is no other way to look at EVM file except Windows Driver Kit. Maybe there are some third-party software that out of my mind can look at EVM files, you may need to perform more research on Internet.
Hope this helps. Thanks.

Failed to play test tone

When ever I try to play any sound, nothing happens. When I go into the control panel and double click on the “sound” icon, it shows my speakers. And when click on my sound device or speakers, and hit test, the message I get it "failed to play test tone".
Now for some background.
1. I had a different soundcard that was doing the same thing, but I thought maybe it just "went bad", so I bought a new one. I’ve installed it with no problem.
2. Yes, all the drivers are up to date. I've run Windows update numerous times and I've double checked the driver version against the one on the manufactures website - they are the same. Everything is up to date.
3. The device manager can see my speakers/sound card and it says its working.
4. I started out on another forum "Media foundation development - Re:Vista/No Sound/Failed to play test tone" and read the whole thread, did everything it told me to, and I even e-mail Microsoft to get a hotfix. I installed the hotfix, to no avail. Nothing has changed, my sound still does not work.
5. The posters/answers at the above thread said they weren't really audio experts and were directing everyone to this thread.


Please help.
Chris

Goto the following key in registry.
HKEY_LOCAL_MACHINE
à
SOFTWARE à
Microsoft à
Windows à
                                    CurrentVersion
à
MMDevices à
Audio à
Render à
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} à
FxProperties
In the right hand side of the registry window
change the value
of {1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
(value type is REG_DWORD) to 1 (one) instead of 0 (zero).
INCASE YOU DON'T FIND THE ABOVE MENTIONED KEY UNDER fxproperties,
PLEASE CREATE IT BY YOURSELF. (COPY & PASTE
{1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
TYPE
IS REG_DWORD AND PUT VALUE 1
The audio start working at the moment you change the above
value !!! (even before closing the registry editor).
Thanks & regards
Deepak & Kabeer.
Doha-Qatar.
Mob : +974-5838614 & +974-5492246

NO SOUND, FAILED TO PLAY TEST TONE

I have a Compac pressario with windows 7 starter, a week ago an update didn-t allow me to use the virtual keyboard, I run a restore to a previous point and it ended up  with no sound also I UNISTALL - REINSTALL AUDIO DRIVER, EVERY TEST SAYS THERE IS NO ISSUE, HOWEVER WHEN I TEST THE SPEAKERS NOTHING IS HEARD and says fail to play test tone. Please help me. There is no assistance available from HP for this model.

Goto the following key in registry.
HKEY_LOCAL_MACHINE
à
SOFTWARE à
Microsoft à
Windows à
                                    CurrentVersion
à
MMDevices à
Audio à
Render à
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} à
FxProperties
In the right hand side of the registry window
change the value
of {1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
(value type is REG_DWORD) to 1 (one) instead of 0 (zero).
INCASE YOU DON'T FIND THE ABOVE MENTIONED KEY UNDER fxproperties,
PLEASE CREATE IT BY YOURSELF. (COPY & PASTE
{1da5d803-d492-4edd-8c23-e0c0ffee7f0e},5
TYPE
IS REG_DWORD AND PUT VALUE 1
The audio start working at the moment you change the above
value !!! (even before closing the registry editor).
Thanks & regards
Deepak & Kabeer.
Doha-Qatar.
Mob : +974-5838614 & +974-5492246

"Failed to play test tone&qu

Ever since I installed the new drivers I get this error " Failed to play test tone"? Has anybody experienced this problem. Please help me get my older drivers installed. Everytime I try to uninstall the beta drivers and restart, DEVMgr instantly reinstalls the drivers. THANKS

I don't know how to solve the test tone error, but to prevent device manager from installing the same drivers again, do this:
After uninstalling all Creative products via the Control Panel -
go into Device Manager
Find your Sound Blaster entry - right click -> uninstall -> check box to delete driver software -> OK -> restart computer.
Those drivers should now be gone from your computer; your OS my install default generic audio drivers, but the Creative ones should be gone.

[SOLVED] ATI HDMI audio fails when playing videos... fine otherwise.

On a fresh install of Arch Linux, despite being an amateur at best. I'm using ATI HDMI audio using the open source driver, on GNOME 3. I'm switching to Catalyst after posting this to see if that might help, somehow.
After adding the radeon.audio=1 to the bootloader, audio on the system began working just fine as long as I restricted myself to audacious (haven't tried another audio player) or the system sound tests. When I try to use VLC, or mplayer2 for that matter, not only does it not play the audio associated with the video but NO audio will pass through the system at all. I have tried changing the audio source in VLC, although default should work... nothing works. Changing the audio in VLC will cause the system's audio to max out. Changing it back to something else doesn't help, but I can change the volume after closing the video programs, and after a few clicks it will go back to the "bloop" sound that confirms volume changes. Everything works fine again.
I have been at this all day and I am at wit's end. My google searches are getting way too long to be of any help. Any pointers or obvious things that I've missed in my caffeine haze would be greatly appreciated. Thanks!
...SOLVED by switching to Catalyst drivers from open source.
Last edited by ohshitgorillas (2012-09-03 02:46:33)

For anyone else looking for the alternatives to xv, it looks like some good answers can be found here: https://bbs.archlinux.org/viewtopic.php?id=133682

I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?

I have an I phone 3g and I downloaded the newest software and I can't get any music to play. I can't change my playlists and the songs I have on the phone just get skipped over. What can I do to correct this?

it recognizes the iPOD but I can't get any of the new songs to import to the iPOD
are you getting an error message, Odessa? if so, what does it say? include error message numbers if you're getting any.
if you're not getting an error message, describe what happens when you try to transfer songs to the ipod as best you can.

HDMI audio fails speaker-test, Radeon Richland

I've just put together a new machine and installed Ubuntu 13.10 on it. The system has an integrated AMD Radeon Richland APU. The Onboard audio is working fine (tested with headphones). The HDMI audio is enabled in BIOS, and it's listed in aplay -l and in the Sound Settings dialog. But it's not making a sound, and after many tests and possible fixes, I'm at a loss what to try at this point.
Perhaps the most telling indicator about the problem is the error message I get when I run speaker-test:
speaker-test -l 4 -c 2 -r 48000 -D hw:0,3
speaker-test 1.0.27.1
Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Home directory not accessible: Permission denied
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
Things I've tried already:
Ensure HDMI is unmuted in alsamixer
Update alsa to latest daily build. I'm now running oem-audio-hda-daily-dkms - 0.201402110705~ubuntu13.10.1 downloaded from launchpad
Update video driver from radeon to fglrx (catalyst 13.12). Had to write a custom xorg.conf file for this (see below)
Checked volume and settings in PulseAudio Volume Control - set HDMI audio to be the fallback output.
Updated grub as per this thread: https://bugs.launchpad.net/ubuntu/+sour … bug/864735
Here are some further details about the system:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
dmesg | grep HDMI
[ 11.201380] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xff744000 irq 52
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xff740000 irq 16
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic
lsmod | grep snd
snd_hda_codec_realtek 57495 1
snd_hda_codec_generic 68274 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 46433 1
snd_seq_midi 13324 0
snd_hda_intel 52306 5
snd_hda_codec 137465 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30095 1 snd_seq_midi
snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29433 2 snd_pcm,snd_seq
snd 69141 22 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
lspci -nn | grep VGA
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Richland [1002:999c]
lshw -c video
*-display
description: VGA compatible controller
product: Richland
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=fglrx_pci latency=0
resources: irq:53 memory:c0000000-cfffffff ioport:f000(size=256) memory:ff700000-ff73ffff
cat /etc/X11/xorg.conf
Section "Device"
Identifier "ATI radeon 8650"
Driver "fglrx"
EndSection
Would be very grateful for any insight you guys can provide!
Many thanks
Last edited by Jugdish (2014-02-13 17:46:02)

emeres wrote:Have you tested the cable with some other units?
Yes I plugged in my Windows 7 laptop using the same HDMI cable and TV port, and audio worked fine (after switching from analogue to digital audio in the TV settings). So I don't think the problem is the cable.
Here is the output from
xrandr --props
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920
DFP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm
EDID:
00ffffffffffff0034a935c101010101
00130103800000780adaffa3584aa229
17494b00000001010101010101010101
010101010101023a80d072382d40102c
4580ba882100001e023a801871382d40
582c4500ba882100001e000000fc0050
616e61736f6e69632d54560a000000fd
00173d0f440f000a2020202020200122
SignalFormat: TMDS
ConnectorType: HDMI
1920x1080 50.0*+ 60.0 59.9 60.1 50.0 24.0 60.0 24.0
1776x1000 50.0 59.9 50.0 24.0 60.0
1680x1050 60.0 50.0 59.9 24.0 24.0
1400x1050 60.0 50.0 59.9 24.0 24.0
1600x900 50.0 59.9 24.0
1280x1024 60.0 50.0 59.9 24.0 24.0
1440x900 50.0 59.9 24.0
1280x960 50.0 59.9 24.0
1280x768 50.0 59.9 24.0
1280x720 60.0 50.0 59.9 24.0
1024x768 50.0 59.9 24.0
1152x648 50.0 59.9
800x600 50.0 59.9
720x576 59.9 24.0 50.1 50.0
720x480 50.0 24.0 60.1 60.0 60.1 59.9
640x480 50.0 24.0 60.0 59.9
DFP2 disconnected (normal left inverted right x axis y axis)
SignalFormat: TMDS
ConnectorType: DVI-D
CRT1 disconnected (normal left inverted right x axis y axis)
SignalFormat: VGA
ConnectorType: VGA
Last edited by Jugdish (2014-02-15 09:53:12)

Upon startup multiple audio sources begin playing. I can't find the tab to kill them!

Having pages begin streaming audio upon startup AND not being able to find out where audio is coming from is frustrating almost beyond words ... it is hard for me to imagine this wasn't addressed with the first "tabbed" version. Sometimes I'm almost tempted to see if another brower has this handled. PLEASE FIX IT OR LET ME KNOW OF AN ADD-ON TO ADDRESS THIS. If the latter, I suggest you co-opt that feature into the next major release. AWOL sound is maddening. 3 youtubes + 5 podcasts + lastfm should NOT be playing at the same time BY DEFAULT just because the tabs were open on last shutdown. Further, I suggest *ANY* source of audio should easily found and jumped to to kill or mute.

If pages have embedded audio, it is not always easy to stop it. I have a bookmarklet that allows me to stop embedded audio if I click it on the page in question. If you are having Firefox open with the tabs from the last session and several of those pages have embedded sound, either turn them all off one by one or do not save a session with embedded sound in the pages. The bookmarklet is this:
javascript:(function(){function%20R(w){try{var%20d=w.document,j,i,t,T,N,b,r=1,C;for(j=0;t=["embed","iframe"][j];++j){T=d.getElementsByTagName(t);for(i=T.length-1;(i+1)&&(N=T[i]);--i)if(j!=3||!R((C=N.contentWindow)?C:N.contentDocument.defaultView)){b=d.createElement("div");b.style.width=N.width;%20b.style.height=N.height;b.innerHTML="<del>"+(j==3?"third-party%20"+t:t)+"</del>";N.parentNode.replaceChild(b,N);}}}catch(E){r=0}return%20r}R(self);var%20i,x;for(i=0;x=frames[i];++i)R(x)})()
Add a new bookmark, copy that code to the location, and name it "No music or iframes".

How do I get Independent Headphone to be the default playback device in Beats Audio?

In the Beats Audio control panel (I own a Pavilion dv7-4051nr) the only option listed for Independent Headphone is default communication device. The only time I have been able to enable Independent Headphone for sound playback was through Windows Media Player (Tools>Options>Devices>Speakers>Properties). I thought the audio was superior and played louder compared to using the Speakers and Headphones as playback device for headphone listening. However, the next time I logged on and attempted to play a CD with Independent Headphone there was no sound output despite the fact that the Independent Headphone volume control on the taskbar indicated it was working. When I switched to Speakers and Headphones, sound was delivered to the headphones as normal.

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

Known issue: Cortana does not play audio through the default playback device (Windows 10 Insider Preview SDK and tools, April 2015 release)

When getting audio feedback from Cortana on a device with multiple playback endpoints (e.g., a device with a headset and an internal speaker), the playback may occur on the incorrect device. For example, Cortana may not send audio to the default device
after the default has been changed in the control panel.

There is no workaround for this issue.

How can I change default iCal alert tones? Basso is awful!

I am running iCal on a MacBook Pro using OS X 10.9.4
I've looked at previous threads and tried their suggestions of altering the default in the Library or using Terminal. Neither of these seem to work in the new OS X, as the files have been restructured for iCal or placed in other directories.
Please help - I do not want to receive alerts with the horrible 'Basso' tone. I can customise new events as I create them, but events from the cloud use the default sound (which is 'Basso') and I want to change that.

Make sure "All Day" is not checked and you can do it.
Update: I now see you want that as the calendar Events default. Sorry

How can I change default audio / sound output or remove the displayport audio option?

I upgraded from Mavericks to Yosemite and while I don't have any of the number of issues that see to accompany that move, I've discovered a different one that is not necessarily related to it, but is irritating.
2014 Macbook Pro Retina
I use a thunderbolt to displayport (AKA just displayport) cable to attach a Dell monitor to my mac at the desk.
Prior to this update, the mac ignored the display as far as audio was concerned (the Dell does NOT have audio built in). But now it seems to think it does.
Moreover, it continually switches back to that Sound output in the preferences whenever I plug or unplug an audio source from the audio jack. This is Annoying!
Is there any way to either
1) set the default to prefer the internal speakers / headphones instead of the DP?
2) remove the Sound output for the DisplayPort connection (which is a false connection since the Dell doesn't actually have AUDIO)
Thanks much

I found the com.apple.audio.SystemSettings.plist and Com.apple.audio.DeviceSettings.plist, but can't make sense of either enough to feel confident in altering any entries there. here's the SystemSettings one that seems like it might have something you could change, but...

I have an iPhone 5 and when I'm playing music I can't change the song or start and pause on any of the shortcuts, what can I do ?

When I'm playing music and am on other things and swipe the shortcuts up, I am in able to change the song or pause and play, the same thing happens when I have locked my phone.
I have to keep unlocking my phone and going into my music to change the song, this is very frustrating!
I've gone onto settings but I am unable to find anything that will change this?
What can I do?!

I never use than switch and I had forgotten it existed but yes that was the problem.
Thank you I would have gone nuts. As they say there is no fool like an old fool.
Thanks again.
Kempsta

How can I change default audio peripheral for Flash Player ?

Hello,
I want to stream music from youtube vidéo to my TeamSpeak3 Client. For now I use VB-Audio Virtual Cable to spread my music with VLC. But the problem is that i can change output peripheral for VLC, but i can't find this option for Adobe Flash Player.
Can someone help me ?
Ps : I already search for answers but I don't find what I want, I also search in the parameter manager.
Flash Player version : 14.0.0.145
OS : Windows 7 (64-bit)

I found the com.apple.audio.SystemSettings.plist and Com.apple.audio.DeviceSettings.plist, but can't make sense of either enough to feel confident in altering any entries there. here's the SystemSettings one that seems like it might have something you could change, but...

No HDMI Audio, Failed to Play Test Tone, Can't Change Default Playback Device

Similar Messages

Maybe you are looking for