No HDMI Audio on Optimus system
Hello Everyone,
I have an Asus G46vw Laptop, and I got HDMI working which did not work out of the box. This laptop has an onboard Intel HD4000 and a Discrete Nvidia 660M. Keep in mind that Bumblebee for me is out of question. I need HDMI video support. I am having issues with getting HDMI audio to work. I am pretty good at googleing and finding varous solutions to solve other problems I have had (e.g. HDMI video, borked touchpad, fn keys, etc). Half of my hardware is broken out of the box lol. Now I do have sound through my main speakers. I would try making various conf files with my HDMI hardware ID but unfortunately I don't think it is being detected properly as a sound device. Below is my aplay output.
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: VT1802 Digital [VT1802 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
When I do "#aplay --list-devices | grep -i HDMI" nothing shows up. Any help is appreciated. Keep in mind I am new to Arch (have been on Ubuntu off and on last several years). I have beaten the hwiki to death I think
Also this is somewhat off topic but for some reason when HDMI gets activated after boot the boot sequence log is still shown on the Laptop screen. Is this normal? Shouldn't the laptop screen shut off at least after HDMI kicks on or I start my DE? I do not see an option in Settings/Display to turn off laptop screen (Gnome 3 DE)
Last edited by Sandman007 (2014-04-25 02:45:26)
I have the same problem. It doesn't look like the correct things are exposed through the nvidia card/drivers until they fix it. For instance in my case only the VGA controller is visible through lscpi
$ lspci |grep NVIDIA
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce GT 520M] (rev a1)
Similar Messages
-
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
[Solved] Issue setting HDMI audio to default
Hoping I'm not overlooking something very simple here.
I have a Radeon HD4650 in my HTPC which I'm trying to run the audio through the HDMI output. I've set the kernel parameter "radeon.audio=1" and am able to hear sound through HDMI when I specify it manually within each application (for example XBMC or VLC going to Audio->Audio Device->HD-Audio Generic, HDMI 0 HDMI Audio Output).
From there I tried to set the HDMI audio as default by following the wiki here:
https://wiki.archlinux.org/index.php/Al … sound_card
And here:
https://wiki.archlinux.org/index.php/Al … s_not_work
I've tried several combinations within my .asoundrc and asound.conf including:
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default "hw:0,3"
defaults.pcm.card 0
defaults.pcm.device 3
defaults.ctl.card 0
pcm.!default "plughw:0,3"
ctl.!default "plughw:0,3"
pcm.dmixer {
type dmix
ipc_key 2048
slave {
pcm "hw:0,3"
period_size 512
buffer_size 4096
rate 48000
format S16_LE
bindings {
0 0
1 1
pcm.!default {
type plug
slave.pcm dmixer
pcm:iec958 {
type plug
slave.pcm dmixer
pcm.!default {
type plug
slave {
pcm "hw:0,3"
ctl.!default {
type hw
card 0
Most of these I just copied from the wiki or various forum posts I found and edited the proper device in. These appear to work, as the HDMI card shows up as default in alsamixer (I've made sure everything is unmuted here), but selecting the default channel in VLC still results in no sound, not even from the built in audio (I can change the output to the HDMI option and it works fine).
I've also tried this which results in no sound:
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Is there something I'm missing here?
Here's my aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
A quick note here: I set this option in /etc/modprobe.d/:
options snd_hda_intel index=-2
This moved the HDMI card up to device 0 instead of 1. I've tried everything above as well with plughw:1,3 when that was the HDMI device.
aplay -L:
null
Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output
sysdefault:CARD=Intel
HDA Intel, ALC1200 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC1200 Digital
IEC958 (S/PDIF) Digital Audio Output
lsmod | grep snd:
snd_hda_codec_hdmi 29701 1
snd_hda_codec_realtek 35517 1
snd_hda_intel 35309 0
snd_hda_codec 147474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6332 1 snd_hda_codec
snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
snd 58950 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5418 1 snd
amixer -c 0:
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013
[ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ee70000-0x000000007eecbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007eecc000-0x000000007fdf4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fdf5000-0x000000007fe00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fe01000-0x000000007fe97fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fe98000-0x000000007fee7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee8000-0x000000007feebfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007feec000-0x000000007fef0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fef1000-0x000000007fef1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fef2000-0x000000007fefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
[ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ee6ffff]
[ 0.000000] [mem 0x7c000000-0x7edfffff] page 2M
[ 0.000000] [mem 0x7ee00000-0x7ee6ffff] page 4k
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7eecc000-0x7f9fffff]
[ 0.000000] [mem 0x7eecc000-0x7effffff] page 4k
[ 0.000000] [mem 0x7f000000-0x7f9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdf4fff]
[ 0.000000] [mem 0x7fc00000-0x7fdf4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fe01000-0x7fe97fff]
[ 0.000000] [mem 0x7fe01000-0x7fe97fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fee8000-0x7feebfff]
[ 0.000000] [mem 0x7fee8000-0x7feebfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fef1000-0x7fef1fff]
[ 0.000000] [mem 0x7fef1000-0x7fef1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7feff000-0x7fefffff]
[ 0.000000] [mem 0x7feff000-0x7fefffff] page 4k
[ 0.000000] RAMDISK: [mem 0x7e79a000-0x7ee6efff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
[ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 00000076 01000013)
[ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 00000076 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000007fe98000 00040
[ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
[ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 00000076 MSFT 01000013)
[ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 00000076 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 00000076 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007feef000 001B7 (v01 INTEL Cpu0Ist 00000076 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007feee000 001B7 (v01 INTEL Cpu1Ist 00000076 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007feed000 001B7 (v01 INTEL Cpu2Ist 00000076 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007feec000 001B7 (v01 INTEL Cpu3Ist 00000076 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fefffff]
[ 0.000000] NODE_DATA [mem 0x7fe93000-0x7fe97fff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c600000-ffff88007e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ee6ffff]
[ 0.000000] node 0: [mem 0x7eecc000-0x7fdf4fff]
[ 0.000000] node 0: [mem 0x7fe01000-0x7fe97fff]
[ 0.000000] node 0: [mem 0x7fee8000-0x7feebfff]
[ 0.000000] node 0: [mem 0x7fef1000-0x7fef1fff]
[ 0.000000] node 0: [mem 0x7feff000-0x7fefffff]
[ 0.000000] On node 0 totalpages: 523716
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3982 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519734 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007ee70000 - 000000007eecc000
[ 0.000000] PM: Registered nosave memory: 000000007fdf5000 - 000000007fe01000
[ 0.000000] PM: Registered nosave memory: 000000007fe98000 - 000000007fee8000
[ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000
[ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000
[ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86144 r8192 d24448 u524288
[ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515507
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2042856k/2096128k available (4920k kernel code, 1264k absent, 52008k reserved, 4046k data, 1124k init)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2188.974 MHz processor
[ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 4379.36 BogoMIPS (lpj=7296580)
[ 0.006675] pid_max: default: 32768 minimum: 301
[ 0.006714] Security Framework initialized
[ 0.006729] AppArmor: AppArmor disabled by boot time parameter
[ 0.006937] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008033] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008556] Mount-cache hash table entries: 256
[ 0.008842] Initializing cgroup subsys memory
[ 0.008862] Initializing cgroup subsys devices
[ 0.008864] Initializing cgroup subsys freezer
[ 0.008866] Initializing cgroup subsys net_cls
[ 0.008868] Initializing cgroup subsys blkio
[ 0.008905] CPU: Physical Processor ID: 0
[ 0.008907] CPU: Processor Core ID: 0
[ 0.008910] mce: CPU supports 6 MCE banks
[ 0.008918] CPU0: Thermal monitoring enabled (TM2)
[ 0.008926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.009009] Freeing SMP alternatives: 20k freed
[ 0.010372] ACPI: Core revision 20130328
[ 0.013611] ACPI: All ACPI Tables successfully acquired
[ 0.014894] ftrace: allocating 19564 entries in 77 pages
[ 0.020479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055426] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
[ 0.056666] ... version: 2
[ 0.056666] ... bit width: 40
[ 0.056666] ... generic registers: 2
[ 0.056666] ... value mask: 000000ffffffffff
[ 0.056666] ... max period: 000000007fffffff
[ 0.056666] ... fixed-purpose events: 3
[ 0.056666] ... event mask: 0000000700000003
[ 0.090007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076769] smpboot: Booting Node 0, Processors #1
[ 0.090021] Brought up 2 CPUs
[ 0.090024] smpboot: Total of 2 processors activated (8759.72 BogoMIPS)
[ 0.091305] devtmpfs: initialized
[ 0.091305] PM: Registering ACPI NVS region [mem 0x7ee70000-0x7eecbfff] (376832 bytes)
[ 0.091305] PM: Registering ACPI NVS region [mem 0x7fe98000-0x7fee7fff] (327680 bytes)
[ 0.091305] RTC time: 21:34:09, date: 08/06/13
[ 0.091305] NET: Registered protocol family 16
[ 0.091305] ACPI: bus type PCI registered
[ 0.091305] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.091305] PCI: not using MMCONFIG
[ 0.091305] PCI: Using configuration type 1 for base access
[ 0.093396] bio: create slab <bio-0> at 0
[ 0.093411] ACPI: Added _OSI(Module Device)
[ 0.093411] ACPI: Added _OSI(Processor Device)
[ 0.093411] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.093411] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.094284] ACPI: EC: Look up EC in DSDT
[ 0.097855] ACPI: Interpreter enabled
[ 0.097864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.097879] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.097881] ACPI: Using IOAPIC for interrupt routing
[ 0.097896] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.098027] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[ 0.115962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.116042] ACPI: No dock devices found.
[ 0.121485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.122691] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.122777] PCI host bridge to bus 0000:00
[ 0.122781] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.122783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.122786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.122788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.122791] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.122793] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
[ 0.122795] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
[ 0.122806] pci 0000:00:00.0: [8086:2980] type 00 class 0x060000
[ 0.122920] pci 0000:00:01.0: [8086:2981] type 01 class 0x060400
[ 0.122965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.122994] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.123063] pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
[ 0.123081] pci 0000:00:19.0: reg 10: [mem 0x90b00000-0x90b1ffff]
[ 0.123089] pci 0000:00:19.0: reg 14: [mem 0x90b24000-0x90b24fff]
[ 0.123098] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df]
[ 0.123156] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.123180] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.123224] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.123264] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
[ 0.123345] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.123387] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.123427] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f]
[ 0.123507] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.123560] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.123579] pci 0000:00:1a.7: reg 10: [mem 0x90b25400-0x90b257ff]
[ 0.123661] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.123725] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.123775] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.123790] pci 0000:00:1b.0: reg 10: [mem 0x90b20000-0x90b23fff 64bit]
[ 0.123859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.123926] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.123974] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.124043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.124074] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.124118] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.124188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.124220] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.124264] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.124333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.124366] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.124414] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.124454] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f]
[ 0.124522] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.124567] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.124607] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
[ 0.124675] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.124717] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.124757] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f]
[ 0.124827] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.124880] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.124899] pci 0000:00:1d.7: reg 10: [mem 0x90b25000-0x90b253ff]
[ 0.124981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.125043] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.125088] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.125156] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.125205] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[ 0.125284] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.125289] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.125293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.125376] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
[ 0.125390] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f]
[ 0.125399] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f]
[ 0.125407] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437]
[ 0.125415] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b]
[ 0.125423] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
[ 0.125432] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f]
[ 0.125461] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.125543] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.125555] pci 0000:00:1f.3: reg 10: [mem 0x90b25800-0x90b258ff]
[ 0.125582] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.125683] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
[ 0.125697] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f]
[ 0.125706] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447]
[ 0.125714] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427]
[ 0.125722] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443]
[ 0.125730] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff]
[ 0.125739] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef]
[ 0.125768] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.125901] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[ 0.125917] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.125930] pci 0000:01:00.0: reg 18: [mem 0x90a00000-0x90a1ffff 64bit]
[ 0.125939] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
[ 0.125954] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.125992] pci 0000:01:00.0: supports D1 D2
[ 0.126044] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[ 0.126060] pci 0000:01:00.1: reg 10: [mem 0x90a20000-0x90a23fff 64bit]
[ 0.126130] pci 0000:01:00.1: supports D1 D2
[ 0.126194] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.126198] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.126201] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
[ 0.126206] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.126282] pci 0000:02:00.0: [1106:3432] type 00 class 0x0c0330
[ 0.126300] pci 0000:02:00.0: reg 10: [mem 0x90900000-0x90900fff]
[ 0.126416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130024] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.130034] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
[ 0.130126] pci 0000:03:00.0: [1131:7164] type 00 class 0x048000
[ 0.130153] pci 0000:03:00.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.130174] pci 0000:03:00.0: reg 18: [mem 0x90400000-0x907fffff 64bit]
[ 0.130281] pci 0000:03:00.0: supports D1 D2
[ 0.130283] pci 0000:03:00.0: PME# supported from D0 D1 D2
[ 0.136688] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.136698] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
[ 0.136792] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
[ 0.136823] pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
[ 0.136837] pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
[ 0.136851] pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
[ 0.136866] pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
[ 0.136880] pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
[ 0.136906] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.137025] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.137035] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.137039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.137098] pci 0000:05:03.0: [1814:0301] type 00 class 0x028000
[ 0.137116] pci 0000:05:03.0: reg 10: [mem 0x90800000-0x90807fff]
[ 0.137237] pci 0000:05:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.137254] pci 0000:05:05.0: reg 10: [mem 0x90808000-0x90808fff]
[ 0.137329] pci 0000:05:05.0: supports D1 D2
[ 0.137331] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.137409] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.137415] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
[ 0.137421] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.137423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.137426] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.137428] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[ 0.137431] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
[ 0.137433] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
[ 0.137455] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.137457] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.137544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.137616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.137685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.137753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.137820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.137887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.137954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.138021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.138507] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.138515] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.138552] Found 1 acpi root devices
[ 0.138645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.138645] vgaarb: loaded
[ 0.138645] vgaarb: bridge control possible 0000:01:00.0
[ 0.138645] PCI: Using ACPI for IRQ routing
[ 0.141702] PCI: pci_cache_line_size set to 64 bytes
[ 0.141771] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.141774] e820: reserve RAM buffer [mem 0x7ee70000-0x7fffffff]
[ 0.141776] e820: reserve RAM buffer [mem 0x7fdf5000-0x7fffffff]
[ 0.141778] e820: reserve RAM buffer [mem 0x7fe98000-0x7fffffff]
[ 0.141780] e820: reserve RAM buffer [mem 0x7feec000-0x7fffffff]
[ 0.141782] e820: reserve RAM buffer [mem 0x7fef2000-0x7fffffff]
[ 0.141784] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
[ 0.141898] NetLabel: Initializing
[ 0.141900] NetLabel: domain hash size = 128
[ 0.141901] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.141917] NetLabel: unlabeled traffic allowed by default
[ 0.141945] Switching to clocksource refined-jiffies
[ 0.148603] pnp: PnP ACPI init
[ 0.148630] ACPI: bus type PNP registered
[ 0.148744] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.148747] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[ 0.148750] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.148753] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.148756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.148758] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.148761] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.148764] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
[ 0.148767] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.148769] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.148774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.148919] pnp 00:01: [dma 4]
[ 0.148948] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.148992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.149031] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.149063] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.149126] system 00:05: [io 0x0500-0x053f] has been reserved
[ 0.149129] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.149132] system 00:05: [io 0x0360-0x0361] has been reserved
[ 0.149135] system 00:05: [io 0x0680-0x06ff] has been reserved
[ 0.149139] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149501] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.149573] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.149624] pnp: PnP ACPI: found 9 devices
[ 0.149626] ACPI: bus type PNP unregistered
[ 0.156213] Switching to clocksource acpi_pm
[ 0.156232] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.156236] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.156264] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.156267] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.156276] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.156279] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.156288] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
[ 0.156291] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.156304] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.156307] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.156310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.156313] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.156315] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.156318] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.156324] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
[ 0.156327] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.156330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[ 0.156334] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf88fffff pref]
[ 0.156337] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.156340] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.156344] pci 0000:01:00.0: BAR 6: assigned [mem 0x90a40000-0x90a5ffff pref]
[ 0.156348] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.156351] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.156355] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
[ 0.156358] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.156363] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.156366] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.156371] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
[ 0.156375] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
[ 0.156381] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.156384] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.156389] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
[ 0.156393] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.156400] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8600000-0xf860ffff pref]
[ 0.156402] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.156405] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.156410] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff]
[ 0.156414] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf88fffff pref]
[ 0.156421] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.156425] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
[ 0.156425] pci 0000:00:1e.0: setting latency timer to 64
[ 0.156425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.156425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.156425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.156425] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
[ 0.156425] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
[ 0.156425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
[ 0.156425] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.156425] pci_bus 0000:01: resource 1 [mem 0x90a00000-0x90afffff]
[ 0.156425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.156425] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.156425] pci_bus 0000:02: resource 1 [mem 0x90900000-0x909fffff]
[ 0.156425] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
[ 0.156425] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.156425] pci_bus 0000:03: resource 1 [mem 0x90000000-0x907fffff]
[ 0.156425] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[ 0.156425] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.156425] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff]
[ 0.156425] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf88fffff pref]
[ 0.156425] pci_bus 0000:05: resource 1 [mem 0x90800000-0x908fffff]
[ 0.156425] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.156425] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.156425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.156425] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff]
[ 0.156425] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff]
[ 0.156425] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff]
[ 0.156425] NET: Registered protocol family 2
[ 0.156425] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.156425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.156425] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.156425] TCP: reno registered
[ 0.156425] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.156425] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.156425] NET: Registered protocol family 1
[ 0.156791] pci 0000:01:00.0: Boot video device
[ 0.156891] PCI: CLS 64 bytes, default 64
[ 0.156941] Unpacking initramfs...
[ 0.310182] Freeing initrd memory: 6996k freed
[ 0.313496] Scanning for low memory corruption every 60 seconds
[ 0.313787] audit: initializing netlink socket (disabled)
[ 0.313804] type=2000 audit(1375824849.313:1): initialized
[ 0.326819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.328674] VFS: Disk quotas dquot_6.5.2
[ 0.328731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.328948] msgmni has been set to 4003
[ 0.329231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.329273] io scheduler noop registered
[ 0.329276] io scheduler deadline registered
[ 0.329310] io scheduler cfq registered (default)
[ 0.329439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.329503] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.329571] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.329644] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.329814] intel_idle: does not run on family 6 model 15
[ 0.329849] GHES: HEST is not enabled!
[ 0.329917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.350447] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.350819] Linux agpgart interface v0.103
[ 0.350895] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.353919] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.353952] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.354077] mousedev: PS/2 mouse device common for all mice
[ 0.354143] rtc_cmos 00:02: RTC can wake from S4
[ 0.354275] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.354297] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
[ 0.354307] cpuidle: using governor ladder
[ 0.354309] cpuidle: using governor menu
[ 0.354362] drop_monitor: Initializing network drop monitor service
[ 0.354438] TCP: cubic registered
[ 0.354554] NET: Registered protocol family 10
[ 0.354764] NET: Registered protocol family 17
[ 0.354780] Key type dns_resolver registered
[ 0.355037] PM: Checking hibernation image partition /dev/system/swap
[ 0.397240] PM: Hibernation image not present or could not be loaded.
[ 0.397253] registered taskstats version 1
[ 0.397804] Magic number: 9:719:600
[ 0.397885] rtc_cmos 00:02: setting system clock to 2013-08-06 21:34:10 UTC (1375824850)
[ 0.398920] Freeing unused kernel memory: 1124k freed
[ 0.399295] Write protecting the kernel read-only data: 8192k
[ 0.402578] Freeing unused kernel memory: 1212k freed
[ 0.404163] Freeing unused kernel memory: 408k freed
[ 0.412320] systemd-udevd[45]: starting version 204
[ 0.417813] [drm] Initialized drm 1.1.0 20060810
[ 0.423117] [drm] radeon kernel modesetting enabled.
[ 0.423539] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE180).
[ 0.423580] [drm] register mmio base: 0x90A00000
[ 0.423582] [drm] register mmio size: 131072
[ 0.424493] ATOM BIOS: CAICOS
[ 0.424939] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 0.424942] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 0.425844] [drm] Detected VRAM RAM=512M, BAR=256M
[ 0.425848] [drm] RAM width 64bits DDR
[ 0.425929] [TTM] Zone kernel: Available graphics memory: 1026308 kiB
[ 0.425931] [TTM] Initializing pool allocator
[ 0.425937] [TTM] Initializing DMA pool allocator
[ 0.425964] [drm] radeon: 512M of VRAM memory ready
[ 0.425966] [drm] radeon: 512M of GTT memory ready.
[ 0.426256] radeon 0000:01:00.0: ffff88007e85a800 unpin not necessary
[ 0.881477] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90008be6118
[ 0.881489] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.882702] [drm] Loading CAICOS Microcode
[ 0.901197] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 0.901323] radeon 0000:01:00.0: WB enabled
[ 0.901327] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880079fd2c00
[ 0.901330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880079fd2c0c
[ 0.903890] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc90009432118
[ 0.903895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.903897] [drm] Driver supports precise vblank timestamp query.
[ 0.903924] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 0.903940] radeon 0000:01:00.0: radeon: using MSI.
[ 0.903977] [drm] radeon: irq initialized.
[ 0.920415] [drm] ring test on 0 succeeded in 2 usecs
[ 0.920480] [drm] ring test on 3 succeeded in 1 usecs
[ 1.106683] [drm] ring test on 5 succeeded in 2 usecs
[ 1.106688] [drm] UVD initialized successfully.
[ 1.106780] [drm] Enabling audio support
[ 1.106827] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.106873] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.259354] [drm] ib test on ring 5 succeeded
[ 1.259721] [drm] Radeon Display Connectors
[ 1.259723] [drm] Connector 0:
[ 1.259725] [drm] HDMI-A-1
[ 1.259726] [drm] HPD2
[ 1.259729] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.259730] [drm] Encoders:
[ 1.259732] [drm] DFP1: INTERNAL_UNIPHY1
[ 1.259733] [drm] Connector 1:
[ 1.259734] [drm] VGA-1
[ 1.259736] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.259738] [drm] Encoders:
[ 1.259739] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.259818] [drm] Internal thermal controller with fan control
[ 1.260722] [drm] radeon: power management initialized
[ 1.313356] tsc: Refined TSC clocksource calibration: 2188.999 MHz
[ 1.313363] Switching to clocksource tsc
[ 1.331618] [drm] fb mappable at 0x80375000
[ 1.331620] [drm] vram apper at 0x80000000
[ 1.331622] [drm] size 8294400
[ 1.331623] [drm] fb depth is 24
[ 1.331625] [drm] pitch is 7680
[ 1.331702] fbcon: radeondrmfb (fb0) is primary device
[ 1.544648] Console: switching to colour frame buffer device 240x67
[ 1.550480] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 1.550482] radeon 0000:01:00.0: registered panic notifier
[ 1.550488] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
[ 1.551576] device-mapper: uevent: version 1.0.3
[ 1.551788] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[ 1.584940] SCSI subsystem initialized
[ 1.587002] ACPI: bus type ATA registered
[ 1.587124] ACPI: bus type USB registered
[ 1.587165] usbcore: registered new interface driver usbfs
[ 1.587199] libata version 3.00 loaded.
[ 1.587772] ata_piix 0000:00:1f.2: version 2.13
[ 1.587914] ata_piix 0000:00:1f.2: MAP [
[ 1.587916] P0 P2 P1 P3 ]
[ 1.590067] usbcore: registered new interface driver hub
[ 1.590515] usbcore: registered new device driver usb
[ 1.591219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.591393] ehci-pci: EHCI PCI platform driver
[ 1.592276] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.592288] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.592501] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.592673] xHCI xhci_add_endpoint called for root hub
[ 1.592675] xHCI xhci_check_bandwidth called for root hub
[ 1.592706] hub 1-0:1.0: USB hub found
[ 1.592713] hub 1-0:1.0: 1 port detected
[ 1.592813] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.592819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.592917] xHCI xhci_add_endpoint called for root hub
[ 1.592919] xHCI xhci_check_bandwidth called for root hub
[ 1.592948] hub 2-0:1.0: USB hub found
[ 1.592957] hub 2-0:1.0: 4 ports detected
[ 1.593131] scsi0 : pata_jmicron
[ 1.593158] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.593424] scsi1 : pata_jmicron
[ 1.593609] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
[ 1.593612] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
[ 1.596715] firewire_ohci 0000:05:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x80
[ 1.740079] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.740483] scsi2 : ata_piix
[ 1.740779] scsi3 : ata_piix
[ 1.741044] ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
[ 1.741049] ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
[ 1.741248] ata_piix 0000:00:1f.5: MAP [
[ 1.741250] P0 -- P1 -- ]
[ 1.741284] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.741526] scsi4 : ata_piix
[ 1.741784] scsi5 : ata_piix
[ 1.742032] ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
[ 1.742036] ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
[ 1.742228] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 1.742244] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.742252] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 1.742266] ehci-pci 0000:00:1a.7: debug port 1
[ 1.746161] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.746168] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90b25400
[ 1.753360] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.753568] hub 3-0:1.0: USB hub found
[ 1.753573] hub 3-0:1.0: 4 ports detected
[ 1.753841] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.753845] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.753852] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
[ 1.753886] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 1.754034] hub 4-0:1.0: USB hub found
[ 1.754039] hub 4-0:1.0: 2 ports detected
[ 1.754278] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.754282] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.754288] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
[ 1.754321] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
[ 1.754470] hub 5-0:1.0: USB hub found
[ 1.754475] hub 5-0:1.0: 2 ports detected
[ 1.754707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.754711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.754717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.754748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
[ 1.754886] hub 6-0:1.0: USB hub found
[ 1.754890] hub 6-0:1.0: 2 ports detected
[ 1.755113] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.755117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.755123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.755146] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
[ 1.755279] hub 7-0:1.0: USB hub found
[ 1.755284] hub 7-0:1.0: 2 ports detected
[ 1.755501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.755505] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.755511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.755533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
[ 1.755672] hub 8-0:1.0: USB hub found
[ 1.755677] hub 8-0:1.0: 2 ports detected
[ 1.756794] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.757624] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.757636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
[ 1.757651] ehci-pci 0000:00:1d.7: debug port 1
[ 1.761541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.761550] ehci-pci 0000:00:1d.7: irq 23, io mem 0x90b25000
[ 1.770027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.770236] hub 9-0:1.0: USB hub found
[ 1.770242] hub 9-0:1.0: 6 ports detected
[ 1.793425] hub 6-0:1.0: USB hub found
[ 1.793434] hub 6-0:1.0: 2 ports detected
[ 1.816762] hub 7-0:1.0: USB hub found
[ 1.816772] hub 7-0:1.0: 2 ports detected
[ 1.840122] hub 8-0:1.0: USB hub found
[ 1.840131] hub 8-0:1.0: 2 ports detected
[ 1.896698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.911468] hub 1-1:1.0: USB hub found
[ 1.911627] hub 1-1:1.0: 4 ports detected
[ 2.064043] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.074751] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.096814] firewire_core 0000:05:05.0: created device fw0: GUID 009027000228f4cc, S400
[ 2.520099] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.520116] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 2.520129] ata4.01: link offline, clearing class 3 to NONE
[ 2.526834] ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100
[ 2.540115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.540132] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 2.540234] ata4.00: configured for UDMA/100
[ 2.547003] ata3.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[ 2.547008] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.560344] ata3.00: configured for UDMA/133
[ 2.560526] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[ 2.562299] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5
[ 2.565388] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.565443] sd 2:0:0:0: [sda] Write Protect is off
[ 2.565446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.565469] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.569249] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.569254] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.569537] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.582466] sda: sda1 sda2
[ 2.582770] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.763375] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 3.186725] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 3.373997] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.384911] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
[ 3.384942] usbcore: registered new interface driver usbhid
[ 3.384944] usbhid: USB HID core driver
[ 3.389375] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input0
[ 3.389518] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.1-1:1
[ 3.956744] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 4.193021] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 4.193111] hid-generic 0003:05A4:9881.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.2-1/input0
[ 4.323187] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
[ 4.323310] hid-generic 0003:05A4:9881.0006: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.2-1/input1
[ 11.876733] bio: create slab <bio-1> at 1
[ 12.881119] bio: create slab <bio-1> at 1
[ 13.707370] PM: Starting manual resume from disk
[ 13.707375] PM: Hibernation image partition 254:2 present
[ 13.707377] PM: Looking for hibernation image.
[ 13.707685] PM: Image not found (code -22)
[ 13.707689] PM: Hibernation image not present or could not be loaded.
[ 14.046090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.787445] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 14.788676] systemd[1]: Set hostname to <HTPC-Arch>.
[ 15.226797] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 15.226858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.226873] systemd[1]: Starting Remote File Systems.
[ 15.227011] systemd[1]: Reached target Remote File Systems.
[ 15.227023] systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
[ 15.227118] systemd[1]: Starting Delayed Shutdown Socket.
[ 15.227240] systemd[1]: Listening on Delayed Shutdown Socket.
[ 15.227251] systemd[1]: Starting LVM2 metadata daemon socket.
[ 15.227365] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 15.227375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 15.227491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 15.227501] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 15.227623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.227662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 15.227875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.227893] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 15.227935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 15.227945] systemd[1]: Starting Paths.
[ 15.228037] systemd[1]: Reached target Paths.
[ 15.228050] systemd[1]: Starting Journal Socket.
[ 15.228187] systemd[1]: Listening on Journal Socket.
[ 15.249416] systemd[1]: Started Set Up Additional Binary Formats.
[ 15.262084] systemd[1]: Starting Apply Kernel Variables...
[ 15.262799] systemd[1]: Starting Create static device nodes in /dev...
[ 15.263427] systemd[1]: Mounting Huge Pages File System...
[ 15.263983] systemd[1]: Starting Setup Virtual Console...
[ 15.264564] systemd[1]: Mounting POSIX Message Queue File System...
[ 15.265156] systemd[1]: Mounting Debug File System...
[ 15.280316] systemd[1]: Started Load Kernel Modules.
[ 15.280348] systemd[1]: Mounting Configuration File System...
[ 15.280921] systemd[1]: Mounted FUSE Control File System.
[ 15.280939] systemd[1]: Starting Journal Service...
[ 15.281676] systemd[1]: Started Journal Service.
[ 15.281761] systemd[1]: Starting udev Kernel Socket.
[ 15.281891] systemd[1]: Listening on udev Kernel Socket.
[ 15.281945] systemd[1]: Starting udev Control Socket.
[ 15.282059] systemd[1]: Listening on udev Control Socket.
[ 15.282117] systemd[1]: Starting udev Coldplug all Devices...
[ 15.282675] systemd[1]: Starting Encrypted Volumes.
[ 15.282783] systemd[1]: Reached target Encrypted Volumes.
[ 15.282802] systemd[1]: Expecting device dev-disk-by\x2duuid-0318dc88\x2d9059\x2d4a62\x2dbcff\x2d33265de192a4.device...
[ 15.282920] systemd[1]: Started File System Check on Root Device.
[ 15.282933] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 15.283591] systemd[1]: Mounting Temporary Directory...
[ 15.420998] systemd[1]: Expecting device dev-disk-by\x2duuid-53882be2\x2d6e5d\x2d4f81\x2d8336\x2d8115b139229a.device...
[ 15.422283] systemd[1]: Expecting device dev-disk-by\x2duuid-a510d99d\x2dd043\x2d415c\x2d9357\x2d87584ac75ce0.device...
[ 15.753587] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 15.847848] systemd-udevd[185]: starting version 204
[ 16.644359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 16.644369] ACPI: Sleep Button [SLPB]
[ 16.644450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 16.644454] ACPI: Power Button [PWRF]
[ 16.751410] pps_core: LinuxPPS API ver. 1 registered
[ 16.751415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 16.808340] media: Linux media interface: v0.10
[ 16.812148] Linux video capture interface: v2.00
[ 16.820027] PTP clock support registered
[ 16.833228] ACPI: Requesting acpi_cpufreq
[ 16.874833] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 16.874837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 16.875034] e1000e 0000:00:19.0: setting latency timer to 64
[ 16.875118] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 16.875143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 16.914814] saa7164 driver loaded
[ 16.916507] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
[ 16.916513] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0x90000000
[ 17.050022] saa7164_downloadfirmware() no first image
[ 17.050682] cfg80211: Calling CRDA to update world regulatory domain
[ 17.051569] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
[ 17.187584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:78:69:22
[ 17.187590] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 17.187615] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
[ 17.187944] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20130328/utaddress-251)
[ 17.187951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.187976] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 17.448874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[ 17.481174] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.580464] saa7164_downloadfirmware() firmware read 4019072 bytes.
[ 17.580469] saa7164_downloadfirmware() firmware loaded.
[ 17.580471] Firmware file header part 1:
[ 17.580473] .FirmwareSize = 0x0
[ 17.580474] .BSLSize = 0x0
[ 17.580475] .Reserved = 0x3d538
[ 17.580477] .Version = 0x3
[ 17.580479] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[ 17.580485] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[ 17.580486] saa7164_downloadfirmware() BSLSize = 0x0
[ 17.580488] saa7164_downloadfirmware() Reserved = 0x0
[ 17.580489] saa7164_downloadfirmware() Version = 0x1661c00
[ 17.621991] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 17.694365] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 17.694422] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 17.694477] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 17.694908] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 17.694980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 17.707929] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 17.907140] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
[ 17.907184] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
[ 17.907251] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 17.993729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
[ 18.040563] coretemp coretemp.0: Using relative temperature scale!
[ 18.040576] coretemp coretemp.0: Using relative temperature scale!
[ 18.100383] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 18.112063] iTCO_vendor_support: vendor-support=0
[ 18.298748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 18.298795] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[ 18.298917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.520198] systemd-udevd[206]: renamed network interface wlan0 to wlp5s3
[ 18.624855] Adding 10485756k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:10485756k FS
[ 18.730190] systemd-udevd[200]: renamed network interface eth0 to enp0s25
[ 20.673933] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 20.681617] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 20.855405] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 21.795385] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 21.896764] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 21.896898] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 22.415792] systemd-logind[284]: Watching system buttons on /dev/input/event4 (Power Button)
[ 22.415885] systemd-logind[284]: Watching system buttons on /dev/input/event3 (Sleep Button)
[ 22.618057] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input9
[ 22.619178] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input10
[ 24.390026] saa7164_downloadimage() Image downloaded, booting...
[ 24.493363] saa7164_downloadimage() Image booted successfully.
[ 24.493397] starting firmware download(2)
[ 26.916146] systemd-logind[284]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 27.103368] saa7164_downloadimage() Image downloaded, booting...
[ 29.170040] saa7164_downloadimage() Image booted successfully.
[ 29.170074] firmware download complete.
[ 29.217377] tveeprom 9-0000: Hauppauge model 88061, rev C4F2, serial# 8524019
[ 29.217381] tveeprom 9-0000: MAC address is 00:0d:fe:82:10:f3
[ 29.217383] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
[ 29.217386] tveeprom 9-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[ 29.217388] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
[ 29.217390] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
[ 29.217392] tveeprom 9-0000: has radio, has IR receiver, has no IR transmitter
[ 29.217394] saa7164[0]: Hauppauge eeprom: model=88061
[ 29.865010] tda18271 10-0060: creating new instance
[ 29.869343] TDA18271HD/C2 detected @ 10-0060
[ 30.094538] DVB: registering new adapter (saa7164)
[ 30.094548] saa7164 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[ 30.383509] tda18271 11-0060: creating new instance
[ 30.387943] TDA18271HD/C2 detected @ 11-0060
[ 30.457571] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 30.457682] e1000e 0000:00:19.0 enp0s25: Link Speed was downgraded by SmartSpeed
[ 30.457685] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 30.457715] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 30.612017] tda18271: performing RF tracking filter calibration
[ 32.898604] tda18271: RF tracking filter calibration complete
[ 32.901771] DVB: registering new adapter (saa7164)
[ 32.901779] saa7164 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[ 32.902195] saa7164[0]: registered device video0 [mpeg]
[ 33.133183] saa7164[0]: registered device video1 [mpeg]
[ 33.343857] saa7164[0]: registered device vbi0 [vbi]
[ 33.343959] saa7164[0]: registered device vbi1 [vbi]
[ 37.832133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 38.787420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
[ 39.333649] EXT4-fs (dm-3): re-mounted.I seemed to have solved this by following the advice in the Gentoo wiki:
https://wiki.gentoo.org/wiki/Radeon#Audio_over_HDMI
pcm.!default {
type plug
slave.pcm "hdmi"
Those four lines in my /etc/asound.conf work. I'm not sure what the difference is between specifying "hdmi" vs the hardware device "hw:0,3".
I still get no sound with `aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav` however, `aplay /usr/share/sounds/alsa/Front_Center.wav` works now. `aplay -D hdmi /usr/share/sounds/alsa/Front_Center.wav` results in an error/warning:
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1239: Channels count non available -
No HDMI Audio from PNY Nvidia G210 Card - Please Help [SOLVED]
***** It's now working! *****
Thanks to some of the posts on the XBMC and Ubuntu hardware forums. I picked up a lot of pointers.
When using this card with XBMC, There is no need at all for an /etc/modprobe.d/sound.conf with probe masks etc. and there is no need for a /etc/asound.conf either (if you are going to just use XBMC like me for your HTPC setup)
All you need is ALSA 1.0.23 installed and at least be running kernel 2.6.34. aplay -l should reveal multiple (4) Nvidia devices as shown in my previous text further down this post, this is fine, however only 1 of these Nvidia devices will actually deliver sound to your TV via HDMI.
In XBMC, goto System Settings, Audio Settings, set device to "Custom" and enter only ONE of the following and then try and play a movie or music in XBMC... (My G210 Nvidia soundcard is card 1 as I also have onboard audio at card 0 so bear this in mind when applying this method to your setup e.g if your HDMI soundcard is card 0 then the first thing to try is plughw:0,3)
plughw:1,3
plughw:1,7
plughw:1,8
plughw:1,9
My PNY G210 card worked using a "Custom" device in XBMC of plughw:1,8
If you are not using XBMC and are using for example a Gnome desktop then you can apparently get sound working by using the text in the code box below in your /etc/asound.conf (this will ensure alsa defaults to the correct card and sub device for hdmi audio) again ensure you are using the correct card number and device number. You can validate this by testing audio as follows from the command line "speaker-test -D plughw:1,8 -r 44100" and simply work your way through the 4 devices until you find the one that works.
pcm.!default {
type plug
slave.pcm {
type hw
card 1
device 8
Given the amount of testing and reading I have done on this, I wouldn't be surprised if this method works for any G210 Nvidia cards and HDMI audio, as the logic seems sound (if you'll pardon the pun! :-))
Hopefully someone will find this helpful.
Original problem text below this point......
Hi Guys,
I am about to give up on this as I cannot get HDMI audio to my TV no matter what I try.
The card is a PNY Nvidia G210. I am running Arch Linux x86_64 and ALSA 1.0.23 and Nvidia driver 256.33
aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: Intel [HDA Intel], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
dmesg shows the HDMI interface of the card being picked up
HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
HDMI: detected monitor SAMSUNG
at connection type HDMI
HDMI: available speakers: FL/FR
HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20
Everything for the Nvidia HDMI is un-muted in alsamixer.
I've tried the tips from the wiki here in terms of probe masks added to sound.conf but still no joy. http://wiki.xbmc.org/?title=HOW-TO_set_ … ,_or_GT240
I've also tried the tips from this post here and still no sound. https://bbs.archlinux.org/viewtopic.php?id=90350
Disabling the motheroard onbonard Intel Audio makes no difference and manually compiling and installing the very latest ALSA driver makes no difference.
Has anyone got HDMI audio working on this card under linux?
Thanks in advance for any help you can offer as I have now run out of ideas and if I can't get this to work will have to revert back to my old ASUS EN9400GT card which takes s/pdif from the motherboard for audio out to HDMI.
Last edited by adr3nal1n (2010-10-14 20:08:42)Works for me too! in my case it was plughw:0,7.
Thank you ever so much!
*hugs* -
HP Pavilion dv9218tx Notebook PC and HDMI audio problem with Sony TV and Windows 7
Sound does not come through with the HDMI connection and, on investigation, there is no HDMI audio driver/option.
Noting that there seemed to be an issue with windows 7 and HDMI audio which is addressed by updating the BIOS and the connexant sound driver I have done so to no effect.
The Sony TV is recognised as a standard monitor in the devices for graphics but not for audio
Suggestions as to why HDMI does not appear - including as a disabled service - and what to do t get is available?Hello everyone,
Thanks for posting on the HP Forums!
I will definitely assist you with lack of sound issues. Before anything else is done, please make sure you try every step in this thread: Troubleshooting Guide: Audio does not Work after a Certain Period of Time
If every step does not help, please provide the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
5. What steps have been attempted from my first post on this thread, and what were the results?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Either way, let me know what happens. Thanks!
Mario
I worked on behalf of HP. -
Bootcamp Windows 7 HDMI audio problem
Hello,
I have problem sound over HDMI with my MBP late 2013 13'' model A1502 on Windows 7 with Bootcamp.
I've installed Windows following Bootcamp wizard from mac and creating bootable WIN7 usb with all support drivers on it. After this I've noticed that there is no sound on my tv when i connect it to my MBP. I've searched a bit more about this problem and I found that the latest graphics drivers might solve this problem so I've updated Intel® Iris™ Graphics 5100 directly from Intel's official web page and after the restart voila I have sound to my TV.
After some time I was configuring my resolutions and I unplugged the HDMI cable and then I put it back again and the sound stopped. At first I was thinking that it is something with the default audio device settings and when I went into the control panel audio settings I've noticed that the HDMI audio device is missing.
I've thinkered a bit and found out that when I unplug the hdmi cable in device manager's "Sound, video and game controllers" the Intel(R) Display Audio is removed from the list but when i put back the HDMI cable it dosent appear in that list. Instead of that in section System devices the High Definition Audio Controller have warning sign and have the following error message: This device cannot start. (Code 10).
You can check it on this image below:
However, when I reboot the MBP with the HDMI from my TV pluged into it it is all OK. So my guess is that it may be some driver service problem or some compatibillity problem with Cirrus Logic CS4208 (AB 93) audio controller. Currently it is working like this but It's very annoying to reboot each time when I wan't to connect it to my TV...
Any suggestions how to fix this problem are welcomed.
Thanksreformat and zero your partition or chkdsk
make sure Windows has 15GB or more free space to work with
I have Macs and PCs all runnng 7 and even 8.
Maybe your iMac hard drive or even if SSD is where the fault lies.
boot from Widows DVD and check your system -
*** dv4-1413tx No HDMI Audio to TV
Please help.
When I plug in the HDMI cable, I only get the Video on LCD TV screen. But there is no audio sound from LCD TV speakers. The audio only output thru dv4-1413tx speakers.
I have tried changing the Default Sound to NVida HDMI audio - but still no audio. When click Test Sound, the audio bar is bumping up and down, but no audible sound from LCD TV speakers
In fact, I notice that once I plug it the HDMI cable, after a short while, the LCD TV will beam up the desktop screen, and when I click on the Sound icon at System tray, it also indicates that it has switched to NVida HDMI audio output. But there is no audio sound on LCD TV speakers. I need to change the Default Sound to notebook speakers, then I get audio sound, and it is output from the notebook, but the video on LCD TV.
I have also tried all HDMI ports of the LCD TV - only Video, NO Audio
Why? I understand that HDMI is capable of transmitting video and audio right???
Please advise how I am supposed to get HDMI audio to LCD TV speakers.......tks.may be the connector, Give this a try, take your playbook with the hdmi adapter to the place where it was purchased ad try it on the same model. you can see if t is the adapter or tv
Be a Shepard and not an iSheep. -
[SOLVED] ATI HDMI audio fails when playing videos... fine otherwise.
On a fresh install of Arch Linux, despite being an amateur at best. I'm using ATI HDMI audio using the open source driver, on GNOME 3. I'm switching to Catalyst after posting this to see if that might help, somehow.
After adding the radeon.audio=1 to the bootloader, audio on the system began working just fine as long as I restricted myself to audacious (haven't tried another audio player) or the system sound tests. When I try to use VLC, or mplayer2 for that matter, not only does it not play the audio associated with the video but NO audio will pass through the system at all. I have tried changing the audio source in VLC, although default should work... nothing works. Changing the audio in VLC will cause the system's audio to max out. Changing it back to something else doesn't help, but I can change the volume after closing the video programs, and after a few clicks it will go back to the "bloop" sound that confirms volume changes. Everything works fine again.
I have been at this all day and I am at wit's end. My google searches are getting way too long to be of any help. Any pointers or obvious things that I've missed in my caffeine haze would be greatly appreciated. Thanks!
...SOLVED by switching to Catalyst drivers from open source.
Last edited by ohshitgorillas (2012-09-03 02:46:33)For anyone else looking for the alternatives to xv, it looks like some good answers can be found here: https://bbs.archlinux.org/viewtopic.php?id=133682
-
[SOLVED] HDMI Audio In VLC Garbled/Inaudible WIth Intel Audio
I thought I understood the difference between cards, devices, and pcm devices, but I guess I don't.
I've set up my system to recognize the Analog Card as the default (card 0), and the HDMI Card as Card 1 via Set The Default Sound Card . My alsa-base.conf:
options snd-hda-intel model=auto
options snd slots=snd_hda_intel
options snd_hda_intel index=1
Output of aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
Output of aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, VT1802 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, VT1802 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=HDMI,DEV=0
HDA Intel HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA Intel HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA Intel HDMI, HDMI 2
HDMI Audio Output
And my latest .aroundrc
pcm.!default {
type hw
card PCH
ctl.!default {
type hw
card PCH
pcm.!hdmi0 {
type plughw
card HDMI
device 3
pcm.!hdmi1 {
type plughw
card HDMI
device 7
pcm.!hdmi2 {
type plughw
card HDMI
device 8
WIth the above configuration, VLC outputs to PC speakers fine using the "Analog Default Audio Device" (However, if it matters, switching to "Analog Front Speakers" is a garbled mess). Selecting HDMI0 and HDMI2 in VLC produces no output. Selecting HDMI1 in VLC is the same garbled mess. However, running this command from Archwiki HDMI Output produces totally clear audio via HDMI:
aplay -D plughw:1,7 /usr/share/sounds/alsa/Front_Center.wav
The list of audio devices that VLC "sees" as selectable for audio output mirrors the PCM devices I see with aplay -L. The three HDMI audio devices in aplay -L each list as their devices 0, 1, and 2 for HDMI0, HDMI1, and HDMI2 respectively. Conceptually, it seems to me like my HDMI PCM devices are messed up. Shouldn't HDMI1, at least, be paired with Device 7, since the command directly above works with device 7? If I understand things correctly, my asoundrc currently overrides cards , however, when I try to get it to override pcm devices, with the following, no hdmi devices are visible in VLC:
pcm.!hdmi {
type plughw
card HDMI
device 7
There must be something I am not understanding - would appreciate any help or insights.
Last edited by strexfive (2014-03-23 09:20:17)Okay nevermind...sort of. It occurred to me to try the same alsa wav test file in VLC through HDMI. It plays clearly with HDMI1 device. So, my understanding of ALSA PCM devices is still totally messed up, but I have discovered my problem is a different one:
VLC plays mp3/mp4/mkv files garbled through HDMI, but clearly through PC Speakers.
Now I will try and solve this new problem myself. Marking SOLVED since original issue was non-issue...can I delete thread so as not to waste everyone's time? -
[SOLVED]HDMI audio and gnome volume applet issues
Hi all,
After setting up Arch without too many problems came the real pain in the ass: HDMI audio over a Asus NVIDIA GeForce EN210....
Eventually I got everything to work with the help of the ASLA en Pulse wiki pages, but I found the last piece of the puzzle here:
http://wiki.xbmc.org/index.php?title=HO … ,_or_GT240
Maybe this is useful for others too.
The only problem I have now is that the ALSA deamon fails to load. I found this in the boot log file (/var/log/boot):
Thu Apr 12 13:54:19 2012: :: Restoring ALSA Levels [BUSY] Found hardware: "HDA-Intel" "Nvidia GPU 0b HDMI/DP" "HDA:10de000b,10de0101,00100200" "0x1043" "0x8343"
Thu Apr 12 13:54:20 2012: Hardware is initialized using a generic method
Does this mean I don't need the alsa deamon anymore? Sound still works normally after boot but a strange thing is that I can turn up and down the volume with the gnome shell volume applet but the volume of media applications like vlc do not react. Same problem with flash video's like youtube. I do hear the "blip" sound from the applet.
Does anyone have ideas how to fix this?
Last edited by Jurry (2012-04-26 23:46:31)yeah have the samre problem, adjusting sound in Amarok doesn't change anything.... happened after the last udev update, here is my bootup log :
Sat Apr 14 17:28:55 2012: :: Adjusting system time and setting kernel timezone [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Starting UDev Daemon [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Triggering UDev uevents [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Loading User-specified Modules [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Waiting for UDev uevents to be processed [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Bringing up loopback interface [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Unlocking encrypted volumes: [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Checking Filesystems [BUSY] /dev/sda1: clean, 29/40160 files, 24631/160616 blocks
Sat Apr 14 17:28:55 2012: /dev/sda4: clean, 76872/18530304 files, 16371381/74101820 blocks
Sat Apr 14 17:28:55 2012: [DONE]
Sat Apr 14 17:28:55 2012: :: Remounting Root [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Mounting Local Filesystems [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Activating Swap [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Configuring Time Zone [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Initializing Random Seed [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Removing Leftover Files [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Setting Hostname: Nashed [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Setting Consoles to UTF-8 mode [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Loading Keyboard Map: us [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Saving dmesg Log [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: INIT: Entering runlevel: 5
Sat Apr 14 17:28:55 2012: :: Starting Syslog-NG [BUSY] [DONE]
Sat Apr 14 17:28:55 2012: :: Starting Network [BUSY] [DONE]
Sat Apr 14 17:29:26 2012: :: Starting net-profiles [BKGD]
Sat Apr 14 17:29:26 2012: :: Mounting Network Filesystems [BUSY] [DONE]
Sat Apr 14 17:29:26 2012: :: Starting crond daemon [BUSY] [DONE]
Sat Apr 14 17:29:26 2012: :: Restoring ALSA Levels [BUSY] Found hardware: "HDA-Intel" "Realtek ALC888" "HDA:10ec0888,80860024,00100202" "0x8086" "0x0024"
Sat Apr 14 17:29:26 2012: Hardware is initialized using a generic method
Sat Apr 14 17:29:26 2012: [FAIL]
Sat Apr 14 17:29:26 2012: :: Starting D-BUS system messagebus [BUSY] [DONE]
I hope it helps identify the problem -
[SOLVED] HDMI audio not working (worked in Ubuntu)
hi there,
I have very new hardware (Intel Core i5 2500, using the internal GPU) and already knew that it would probably take me a while to get everything working (especially the GPU). I first tried Ubuntu 11.04 Alpha with the xorg-edgers ppa, which already supported the new GPU, including 3D acceleration... unfortunately, it made my X server crash about every 15 minutes. Having heard about ArchLinux before I thought I should give it a try. Turned out the packages that I need for my GPU are only available in testing (xf86-video-intel 2.14, Mesa 7.10, Kernel 2.6.37), so I'm running on the testing repository right now. But I gotta say that I'm pretty impressed by ArchLinux, Compiz is working perfectly smooth and the whole system feels way faster than Ubuntu.
Now regarding my problem, I can't get my HDMI audio to work. Usually I would have said to myself "well, ALSA doesn't support it yet, I guess I'm gonna have to wait" . But the reason I'm writing this thread anyway is that it was working fine in Ubuntu 11.04 Alpha. In Ubuntu, I could use the alsa device hdmi:CARD=PCH,DEV=2 for HDMI audio. The strange thing is, this device doesn't exist on my ArchLinux system. Here is my "aplay -L" output.
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=PCH
HDA Intel PCH, ALC892 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
In Ubuntu, I also had hdmi:CARD=PCH,DEV=1 and hdmi:CARD=PCH,DEV=2. So my question is, why are those missing on my system? Kernel and ALSA are the same version (2.6.37 / 1.0.23)!? I also already downloaded a Daily Snapshot of ALSA and did a ./configure, make, sudo make install - still no luck. And btw, DEV=0 outputs sound through my default speakers...
cat /proc/asound/pcm
00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
00-01: ALC892 Digital : ALC892 Digital : playback 1
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1
cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xfe620000 irq 51
any help would be appreciated..
...and really thanks to the whole community, my system is stable as never before and the ArchLinux Wiki is probaby the first Linux Wiki that actually helped me solve my problems.
Last edited by 65kid (2011-01-27 18:05:09)Nevermind, I fixed it myself. ;)
cat /proc/asound/pcm
00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
00-01: ALC892 Digital : ALC892 Digital : playback 1
00-03: HDMI 0 : HDMI 0 : playback 1
00-07: HDMI 1 : HDMI 1 : playback 1
00-08: HDMI 2 : HDMI 2 : playback 1
00-08 is the missing device I was talking about, aplay -L doesn't list it, but it's there. Anyway, I can use plughw:0,8 to use HDMI audio and it works fine, although I'm still confused about the difference betwenn plughw:x,x and hdmi:CARD=PCH,DEV=X... -
[Solved] HDMI audio broken after upgrading to kernel 3.13.4
Hi,
Yesterday I upgraded to kernel 3.13.4 from 3.12.9 and
HDMI audio through my nVidia GTX660 card stopped working.
The problem occurs both with nouveau and nVidia drivers.
My system is an aged Intel quadcore Q9400 on a Intel motherboard.
By typing "aplay -l" I get:
card 0: Intel [HDA Intel], device 0: 92HD73E1X5 Analog [92HD73E1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: 92HD73E1X5 Digital [92HD73E1X5 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
Strangely the alsa card number changed from 1 to 2
after the kernel upgrade.
I would really appreciate any help.
Thanks
Last edited by tenoriocalc (2014-02-23 16:02:46)Thank you very much, silenceleaf.
I managed to make it work with some tweaking like you said.
But only after a deep power cycle, unpluging any power to the system.
Just turning off the machine's power button was not enough. Odd!
Last edited by tenoriocalc (2014-02-23 16:09:44) -
G62-225DX. HDMI audio not working.
Computer recognizes HDMI port and video is working to TV. Trying to change to default in sound settings but won't change. When I test sound error message "failed to play test tone"
Hi Kevin,
See if this will help:
1. Turn off both systems (TV and PC).
2. Connect HDMI cable to the TV and PC.
3. Turn on TV and select correct HDMI input.
4. Turn on your PC.
Open "Control Panel , Sound". See if you can now select TV (HDMI audio) as the correct playback device.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
HP Products:
810-150se Desktop
17t-j000 Notebook
H8 1380t CTO Desktop
560z Desktop
Errare humanum est. -
T410s/T410/T510 DP- HDMI, audio questions, survey
Hi,
after all the confusion concerning DisplayPort-audio and the T-series, I decided to find out for myself and test it at my local Lenovo dealer.
As my dealer had not a single HDMI and audio capable output device in his shop, I brought my own Medion MD 20226 LCD TV, which has 2 HDMI-in ports.
The idea was to use a 2m DisplayPort->HDMI-cable provided by the dealer in order to connect the T410s in question to my little TV.
Background: Due to the misleading information from Lenovo concerning the last generation T400s/T400/T500 models and their audio over DisplayPort issue (no audio at all), I expected to get a picture without any problems but that I would need to figure out how to enable the sound by changing some settings inside Windows 7.
What happened: Actually neither me nor my dealer were able to get ANYTHING out of the DisplayPort, when using the DisplayPort->HDMI-cable. There was NEITHER video NOR audio!
I should point out that at the time being my dealer only had T410s models without the (maybe) switchable NVidia graphics.
Another point that I want to emphasize is that, after 45 minutes of trying everything we could to make it work, we switched to the T510 that was standing right beside the T410s in his show room. Unfortunately I was too confused to ask what kind of graphics setup this machine had, but the result was the same: no video, no audio at the TV.
As it is apparent that there are quite a lot of confused Lenovo customers out there that have similar questions:
I HEREBY FORMALLY ASK FOR A DETAILED AND IN-DEPTH INVESTIGATION/CLARIFICATION OF POSSIBLE DP->HDMI, DP-AUDIO AND DP->HDMI-AUDIO ISSUES WITH THE CURRENT T410s/T410/T510 SERIES (all combinations of graphics cards).
Of course I think that it would be best if one of the Lenovo engineers would take care of that in one of the Lenovo blogs.
But until then, it might be a good starting point to ask those of us, who already have a T410s/T410/T510.
So I just start right away:
MODEL: T410s (NUK39GE / 2912-39G)
used GPU: Intel GMA 5 / QM57
DP->DP-video: not tested
DP->DP-audio: not tested
DP->HDMI-video: tested->not working
DP->HDMI-audio: tested->not working
As I said, I was only able to test it at my local Lenovo dealer and I gave up after around 1 hour of testing. So it might be, that someone who has more time and resources (different adaptors) might be able to get it running.
So to all of you out there with a new Tx10(s), please take the time, find your next HDMI-TV and try it.
And to Lenovo: as long as there is no official statement concerning this, I will keep asking for an official response ;-) (and THIS time, don't blame the chipset, as the new Intel-Calpella has all the HD-video/audio goodness one could ask for: wiki article on Intel Calpella and its DP features).
Thanks for reading all this!Hello all,
please check out this thread too.
Where Ken (Lenovo staff) explains this feature and possible problems.
I would suggest to do a forum search before starting another thread.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
XBMC: HDMI audio starts out OK, then gets distorted after few minutes
Hi,
I have posted about this on the XBMC forums, but one of the developers kindly informed me that they do not support XBMC on Arch Linux in any way, so I should take my queries elsewhere. I am hoping that someone here might be able to shed some light on my issue.
I am trying to use XBMC 13.1 (xbmc-13.1-2) with Samsung EH5300 32" Smart TV (2013 model) over HDMI connection. The HTPC computer is AMD-based (AMD A4-5300 APU, which includes Radeon HD 7480D GPU), and runs an up-to-date Arch Linux (last full system upgrade on 2014-06-26). I am using the open source "radeon" driver (xf86-video-ati-1:7.3.0-1). Everything has been great except the sound:
The sound starts out fine, but a few minutes later it begins to get distorted. At first it sounds like reverb affecting voice only, but with time the distortion increases until it sounds kind of cued TV noise. If I restart the video, the sound works again for a while. If I change options in Settings -> System -> Audio Output, like the number of channels or pass-through, the sound is again good for a little while. If I enable or disable "Stereo Upmix" or change audio stream from the "Audio - Settings" dialogue window available during video playback, it too seems to "reset" the sound to sounding normal for a while.
Has anyone seen something like this?
I have tried different videos, and it seems like HD videos are affected more than SD videos, starting with distortions only a few minutes in (except the one Xvid video, which was fine for 15 minutes). Some SD videos are completely fine, some start having distortion issues only after 20 minutes or so. Judging from video information, if the video uses 5.1 channels (all HD videos fall in this category), it definitely gets distorted; if a video only uses 2.0 channels (like the SD videos), some are fine while others get distortion later on. I have "Number of channels" in Audio Output settings set to 2.0. Changing this (or any other audio settings) has not affected the distortion.
Following Arch Wiki: Radeon note about HDMI audio, I tried adding radeon.audio=1 to the kernel line; this did not solve the issue, just added some visual glitches.
In the XBMC debug log I posted, the distortions happen at around 17:26, though there is absolutely nothing logged at that time, even though I enabled "Verbose logging of AUDIO component" in the Debugging settings. The video I was playing there showed the following in the information window: 720 H.264 dts 5.1 16:9.
Any suggestions, ideas, or experiences would be appreciated. It definitely seems to be XBMC issue, since I was able to play the same HD video through mplayer without any problems (for at least half an hour, which would have already showed distortions several times through XBMC).Hi GDykes,
OK Imagine that Connection speed from your ISP is like an empty freeway. You can go full tilt (upto that road's speed limit)
Bandwidth is like a busy freeway where you only get to go as the bit you are in allows.
Reducing the Bandwidth in iChat or in the System Preferences > Quicktime > Streaming tab is like a vehicle that has a maximum speed that is slower than the speed possible on the freeway.
10:02 PM Friday; July 6, 2007
Maybe you are looking for
-
Credit Card Stopped Working "Oops, seems your card or payment provider is having a bad day"
!!! SUCCESS : read below !!! I was on Premium and Spotify was charging my credit card (last charge in January 2015). Then in February I got an email saying I needed to update my payment information and I lost Premium. I ended up deleting the card an
-
I've tried 3 different hifi's but can't get my iPod to connect....HELP
Please help me.....my iPod won't connect with my hifi. It's a new iPod touch, software version 4.3.5 and the hifi is a new Sony CMT-CX5Bip. This is my 3rd hifi, having returned 2 others thinking they were faulty! Is it my Touch? What can I do?
-
We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data." This same dacpac imports fine using an
-
Special ledger balance carry forward or period 0
Hello BW Experts, how to load the balance carry forward or period 0 for special ledger. is there a different procedure or keyfigure to do this. Please help. Thanks, BWer
-
Hola: Después de haber estado leyendo bastante acerca del error Adobe Premiere Pro no pudo encontrar ningún módulo capaz de reproducir vídeo. Actualice los controladores de visualización de vídeo y vuelva a empezar. No he encontrado ayuda sobre cómo