No HDMI or VGA port..........

I hope I am posting this in the right place, it's my first post so please be gentle.
I have a Toshiba Satellite L300 laptop, I bought it about 3 years ago and it has done the job, HOWEVER I now find myself wanting to hook it up to my HDTV and find it has no HDMI port, I have been online and others say use the VGA port instead, but alas it doesn't have this either.
I have a lot of movies saved on my external Seagate HD and I wanted to use the laptop to play the movies via same onto the TV. Should I just forget the whole thing or is there a workaround that is not too technical as I am no geek? I am in the UK BTW.
Thank you in advance.

Satellite L300/06X (PSLB8A-0KW004)
others say use the VGA port instead, but alas it doesn't have this either
According to the spec above, your computer does indeed have a VGA port..
TV-Out Port VGA
-Jerry

Similar Messages

Intel 4500hd and hdmi output / vga port

hi guys, any hint on how to use my hdmi port or vga port to output on my lcd with a intel 4500hd integrated graphic card? thanks

samuele.mattiuzzo wrote:hi guys, any hint on how to use my hdmi port or vga port to output on my lcd with a intel 4500hd integrated graphic card? thanks
To be honest... it just works here for me. I use KMS and don't have a xorg.conf.

I bought a new MBA and are having problems with HDMI and VGA port

Hi,
I just bought a new mac book air, and at the apple stre they recommended me a mosh mini to vga cabel. I need to use my computer for projector either hdmi or regular vga adapte. The new mba only has thunderbolt, usb, memory/card slot, microphone and headphone ports.
Does anyboody has and idea how i will or how do i connect the hdmi or vga adapaters to the computer. I have been searching on the cables the apple store has available but the end that goes into the computer is not compatible with the ones I mentioned above.
Please any help would be of great help, because I dont know what to do. I think this is a problem with the new MBA.
thank you,

Thank you doubr. So what I need is to buy the thunderbolt cable and the minidisplayport to vga adapter or the griifin mini display port to hdmi tht toothpickproductions recommends, is that correct?
The one I have is a mini dvi to vga adapter and the end that goes into the computer is the same one that the minisdisplayport to vga adapter or the griffin one have, and is too big to go into the new mba. I dont know if I am confusing you more with what I am saying.
check the link below and you will see the ports the mba has
http://www.apple.com/macbookair/specs.html
if you see the ports that mba has, the two minidosplayport that are recommending do not fit..
So, do you know that if I buy the thunderboldt cable will either of the two minidisplay ports fit or I need to buy another adapter for the minidisplay ports??
thank you because I am kind of confused, I did not have this problem with the macbookpro I had before...

Can't switch between HDMI and VGA displays

I have a new H430, with hdmi and vga ports. My HP zr2240w monitor permits switching between AVG and HDMI displays, which I would like to do. But when I plug in both cables (HDMI and VGA) only VGA will work. If I switch to HDMI or make it the default display, the screen freezes at the desktop background: no mouse, no taskbar etc. Is is possible that the D430 video card will not support switching between displays (on a single monitor)
thanks,
saintmaur

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

How to connect an older MacBook Pro with mini VGA port to HDMI?

I have an older MacBook Pro with a female mini VGA port. I would like to watch movies which have been downloaded to my laptop on my flat screen TV. Newer MacBook Pros have a mini DisplayPort for which Belkin makes a cable to use; however, I have not been successful in finding either an adapter or converter to use with my older laptop.
FYI. Am currently using Leopard but am upgrading to Snow Leopard.

I believe you naeed the Apple ADC to DVI adapter.

I need to install the HP drivers on a laptop with a broken screen in order to get VGA port to work.

OS: Windows 7 Home Premium SP1
Hewlett Packard Model: 2000 2a20ca Notebook
Oh my god please give me some insight here, it is so hard to find the right answers and I refuse to lose to this technical box that's driving me nuts! So here's the run down:
My screen broke on laptop...fine. It was connected via HDMI to TV and working fine. Until one day it decided to not turn on. I think due to Windows updates and hubby had no patience so kept restarting
I tried to reload Windows on it, not thinking about the drivers, and I'm pretty sure I managed to reload Windows. Now I need the drivers to install chipset, networking etc. (which I have a disc for)
The problem is I cannot see the screen in order to click "install", I can't see the BIOS or the boot sequence. Ugh! And even if I could, the drivers are not installed to use the CD ROM or VGA port.
I can HEAR Windows start up and turn on! Doo-DO-Doo-DO lol the darn thing is working!
The monitor works in my other laptop.
Would/Should the VGA monitor work if I could get it to start in safe mode?
I've heard of a program that can streamline the driver's into a Windows installation disc so everything is installed altogether but how can I reinstall Windows if the drivers aren't loaded for the CD ROM?
Is there a way to get the necessary drivers installed? or is this notebook now garbage?

RocknRoll77 wrote:
Seriously?
1. The model number is the first thing at the top aside from the OS.
2. In my explanation it states: "I have the drivers on a disk"
Thanks for all your help!
Getting the drivers is not the problem. Getting the drivers installed on a laptop with a broken screen...is the problem.
Ok, well sometimes you can't use external monitor to see what is happening in some laptops and the only real way to fix this is to fix the broken screen so you can reformat and resinstall the system again. Those are you only options at this point in time.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Satellite P750 - Unable to connect external screen via VGA port

Hello All,
My problem is following:
I have been trying to connect my P750 (running on W7 x-64) to an external screen using the VGA port/cable. Unfortunately the external devices does not recognize my laptop. Laptop does recognise the external screen, you can see it in the graphic settings as additional display, but the screen says "no signal".
The computer always identifies the screen correctly, so it looks like there is communication from the screen to the PC, but not the other way round.
This has been checked with 3 separate screens and a TV - always the same. All the screens work properly with different PC's.
I already did:
- try to play with FN+F5 / "windows"+P buttons - no change
- install the latest BIOS and Video drivers from Toshiba website - no change
Any suggestions how to make it work? Is it possible that the VGA port is faulty?
Thank you in advance.

Hello and thank you for the tips,
I did try the options you suggested unfortunately with no success.
I actually got myself HDMI cable and this connection is working perfectly well. Luckily the very screen I want to attach my laptop to does have HDMI port. It is just a bit annoying to know that the d-sub port seems to be useless.
The lady from Toshiba tech support call centre suggested either OS re-install or sending it to Toshiba for repair/check as it is still under warranty. None of this options suites me at the moment, so I will probably stick to the HDMI. Still, I have a feeling it is a software rather than hardware problem.
Cheers

HDMI and DVI port not working on 880GMA-E35

Hello,
I want to use the HDMI port of my 880GMA-35, but the monitor is not getting a signal. I know that the board has two jumpers to switch between the DVI and the HDMI port. In the delivery state the jumper is set to HDMI, but I don't get a signal. There is also no signal, if I switch the jumper to the DVI pins. I have tested this setup which different cables (HDMI and DVI) and two different monitors.
After this test I get a guarantee replacement of the board. The new board is also not working with HDMI or DVI. The VGA port of the first board was working as supposed and I don't see any Bios settings to activate the monitor ports.
Are there any suggestions to solve my problem?
Thanks in advance and kindly regards
Daniel

>>Posting Guide<<
please read the above guide and follow it!
firstly we need alot more information to what componants you have in your system?
eg see my signature bellow this post for the type of information we need! main parts are:
motherboard
CPU
RAM
PSU (include the +12v ampage ratings)

What cables do I need to connect MacBook Pro to the TV VGA port

Nov 6, 2014 7:01 PM
Hi,
The HDMI port on my Maxent tv is not working. I am hoping to connect my MacBook Pro to the TV via the VGA port on the TV to watch Netflix and movies. What cables do I need that will connect to a VGA port on a TV from my MacBook Pro (2.4GHz Intel Core 2 Duo)? And will that cable support audio or will I need a separate audio cable?
Thanks-
Sheri
OS X Mountain Lion (10.8.5)

Hey Sheri Lynn,
Thanks for the question. Our online store has a helpful tool that should guide you through the process of picking the best adapter for your MacBook model. You can check it out here:
Get help choosing Mac video adapters - Apple Store (U.S.)
http://store.apple.com/us/mac/mac-accessories/cables/cable-chooser#!
If you are connecting via VGA you will need a separate audio cable if your TV supports it.
Thanks,
Matt M.

Mini-HDMI to VGA does not work with projectors having long cables

Hi
I use a ThinkPad Yoga with Windows 8.1 and have problems to get a video signal to some projectors using a Mini-HDMI VGA adapter like this http://www.amazon.com/Cable-Matters-Active-Female-Adapter/dp/B00879ELGA/ref=sr_1_1?ie=UTF8&qid=13979...
Usually it works but in some lecture/presentation rooms projectors show "no signal" (I changed all possible graphic settings). There seems to be a problem with cable length because after using a VGA repeater increasing video signal strength projectors show a picture. But the problem is those VGA repeaters are quite expensive and too big (if you are travelling). Some Mini-HDMI VGA adapters have USB ports to connect them to a power source but this does not really help to increase signal strength.I find this issue very annoying because all other (older) laptops with VGA ports or MacBooks with displayport-VGA adapters do not have this problem and produce a video signal that is strong enough to connect to projectors with long cables.
My questions are:
a) Is it possible to adjust my ThinkPad hardware settings to improve signal strength?
b) If not, is there a small Mini-HDMI VGA adapter that produces a signal strong enough to connect projectors with long cables?
c) If not, is there an affordable and small VGA repeater that does the job?
Thanks!

1) that is not possible
2) Why not get a USB2VGA converter?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Mac mini hdmi to VGA

On my Mac mini, I have been using thunderbolt to VGA for a monitor & it works fine. I would like to add a second monitor. I bought a hdmi to VGA but when plugged in, there is no picture on the second display and the first display blinks off & on. Am I wrong in thinking this should work? How else would I get the second display?

From:
http://support.apple.com/kb/HT4214
Can the HDMI port drive analog displays (VGA displays for example) using adapters?
No. The HDMI port will drive digital connections—such as DVI—using the adapter that came with the Mac mini, but cannot be used for analog displays such as VGA. You can purchase a Mini DisplayPort to VGA adapter separately to drive analog displays.
If yo really need ton use two VGA monitors yo willneed a UBS video adopter
http://www.kensington.com/kensington/us/us/p/1505/K33974AM/universal-multi-displ ay-adapter.aspx#.UxSD9_mwKBo
or
http://www.kensington.com/kensington/us/us/p/1505/K33974AM/universal-multi-displ ay-adapter.aspx#.UxSD9_mwKBo

Using a 27" iMac as display for PC with VGA port

There is a lot of talk aout there about using a 27" iMac as a display with the mini displayport to displayport cable. It is so exciting! I am trying to connect a PC laptop with a VGA port to a 27" Dell Latitude D620. I'm seeing mixed reviews out there. Has anyone tried this or know of a good convertor/adapter/cable from VGA to displayport?
I apologize if I missed this discussion already.

Apple creates products that work with one another. If they happen to also work with another manufacturer's products, then it is icing on the cake, but not a priority.
You will not be able to accomplish your goal with any series of passive adapters. You need an active VGA to DisplayPort converter to convert the VGA analog video signal to a digital DisplayPort video signal. No one makes one that I can find in web searches.
If you can add a new video card to the PC, it may be much less expensive to get a video card with DisplayPort output for the PC. Then you just need a DP to m-DP cable. But if not a DisplayPort card, then you can convert HDMI/DVI to DisplayPort. Those converters are US$150.

Mac Mini (Late 2014) 2 display HDMI and VGA

Hi,
I got my new mac mini and i have 2 display. One is with HDMI, other is VGA.
I will use normal HDMI port and thunderbolt port with Mini DisplayPort to VGA adapter from Apple to use them both, and i want to "Extend" my screen but the Apple guy on the store told me that "you only can duplicate the screen, can not extend it; both your HDMI and VGA monitors screen the same thing."
Is it correct? Because i think he is not sure about what he said it doesn't make sense to me.
Regards.

I have no idea where what person is getting his information. I have used yur arrangement on my 2012 Mini which has one HDMI and one Thunderbolt port.
You sense is better than that person's. You you can have extended display with HDMI and VGA via mini displayport (plugs into Thunderbolt port) to VGA adopter

Connecting G4 Sawtooth to HDTV Without VGA Port

My new TV does not have a VGA port, but I'd like to hook my G4 up to it for use as a monitor. I've seen several DVI or VGA to Component video adapters online, but do these work? Should I go with a VGA to Composite adapter?

For audio without HDMI you'll need to use the optical audio output on the Apple TV 2 (ATV2). If your TV or stereo receiver doesn't have an optical INPUT you'll have to get a D-to-A converter box that accepts an optical input and outputs a stereo RCA audio signal (you can find such adapters on the internet, they may run around $30 U.S.). For your TV, make certain that it is an optical INPUT, many TVs only come with optical outputs.
In any case, you also need to be aware that the ATV2 is designed to work over HDMI and even though it may function using an HDMI-to-DVI adapter there is no absolute guarantee that it will work without issues. First off, you need to make certain that the DVI port on your TV supports HDCP copy protection and it needs to support it well (some DVI devices may say that they support HDCP but not all of those devices are created equal and HDCP can be a "real bag of hurt," it can be very finicky).

HDMI To VGA on the Mac Mini

I have a New Mac Mini and need to add a second VGA screen to the HDMI port will the Belkin Hdmi to Vga convertor be able to do this?

Thanks Guys
Just one last thing would the below be able to do it as well, just not sure which one to buy? The Belkin Or Kanex
http://store.apple.com/us/product/H9139VC/A/kanex-atv-pro-hdmi-to-vga-adapter-wi th-audio-support?fnode=3a

No HDMI or VGA port..........

Similar Messages

Maybe you are looking for