No HDMI output from Aja IoHD

I have Final Cut Studio 6.0.4, Aja Io HD driver 6.0.1 on a Mac Pro with 10.5.5 and QT 7.5
Using ProRes as default, capturing component SD (625i) works just fine. I can see my footage on my preview monitor over CVBS.
But I can't get any output on HDMI to feed my plasma display?
No matter if I have FCS started or not, fiddling with the HDMI section in Aja Control Panel shows nothing (tried RGB, Component, primary, secondary, 2 audio channels, 8 audio channels... nothing).
I connected the HDMI cable to a stand-alone DVD player. The picture shows up just fine. So I figure there's nothing wrong with the cable or the plasma. The plasma says something like "unavaiable signal mode" or something like that. Looks like it does not understand the HDMI being fed from the IoHD. The cable is HDMI 1.3 - but sure those cables are backward compatible, right?
Any ideas?

(Hi Shane, so you're hanging about here, too? :-))
Beats me. Even if it does carry only HD, the plasma really should be able to handle it, if the HD is PAL (everything on the IoHD is set for 625i, both primary and secondary).
Otherwise, I really like the IoHD. It's plug-and-play and even if the native format is ProRes422 (some say it's a great codec, other that it is not at all that great) it's far better than capturing analogue Betacam SP to DV25... (which we have done up until last Friday). And really, you can't tell a difference. At lest not in SD on a standard CRT monitor.

Similar Messages

  • Is it possible to permanently disable HDMI output from Logic?

    Every time my monitors wake from sleep, Logic asks if I want to switch my audio output to HDMI... pretty irritating as I have agressive energy saving settings, which I'd like to keep, as I try to keep my studio as energy efficient as possible, and 2 big LCD's suck a lot of current. The box that pops up also causes playback to stutter, so if I wake the monitor during playback there is that issue as well (also very irritating).
    In windows there is an option to permanently disable hdmi audio, is there something similar in OSX or in Logic itself?
    Thanks for the help!

    Do you have timing problems with HDMI? I stopped using HDMI because the audio and video didn't seem to sync properly. The difference wasn't huge but big enough to cause it to be hard to recognize points in the piano roll and audio edit windows at some zoom ratios.

  • No audio from hdmi output from graphics card

    hello, i have a ms-7191 motherboard that has on board graphics, i installed a visiontec ATI 4350 card so i can output the a/v to my vizio 46" TV using one of the hdmi ports. , the video works but no audio. tried to update the drivers from msi-no help, tried to update the graphics card drivers from visiontec (added the hd audio driver)-no help. tried updating the realtek driver-no help. tried swapping hdmi ports on the TV-no help. i know that i'm  not the first to not be able to do this and i have searched for the answer, but i out of ideas, is it possible the problem is that it has a onboard graphics on the board? what should i do now?
    Joel

    This board came with a spidif bracket-installed into the pci e connector, maybe i am missing something here, is it that is there is no audio connector to the graphics card, so there will be no sound from the hdmi connector? if so how does one get a card to work with the hdmi for both A/V? i thought this card will be able to access the needed info, maybe not then, and if that is the case, then, i don't understand why we have graphics cards with the hdmi interface if it is not useable. i should be able to get by just fine with a dvi out to the tv and add a audio out ( but this tv doesn't have a dvi port ,just the vga-crap. well i do have the s video port-it ani't all that either,,please shed more guys...
    Joel

  • Sony Bravia Z5500 will not recognise HDMI output from Apple TV 2nd Gen

    After a frustrating time trying every connection possibility - various HDMI cables, all 4 slots, I still had no picture or sound. A week later (living so far from the shop) - I( angrily confronted stafff and told them I had a dud Apple TV. I had spent hours on the phone, firefox, apple and sony sites.
    They took it from me and plugged it into a samsung 3d tv and - hey presto - instant picture. I feel like an idiot - and I thought I knew all about technical issues. But this is just annoying me. They looked at this old man and just shook their heads. I am resorting to the hope that someone out there knows the answer ... ??

    got a bravia KDL-40WE5W and my appletv 1g never had any problems but if you messed with hdmi settings if thats possible and forced it to use various overscan only accept 1080p or something that could cause problems I guess

  • HDMI output not working since firmware upgrade

    I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
    Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
    Any troubleshooting suggestions would be appreciated.

    Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
    Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
    - SD Card: total space - 5.43GB; Available space - 5.43GB
    - Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
    - System storage: Total Space - .97 GB; Available space - .59GB
    In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

  • X121e HDMI output - how to enable?

    Hi, I can't work out how to enable HDMI output from this laptop to my TV. On other laptops I've tried with the TV they respond to me plugging in the HDMI cable. On this one nothing happens. Also I can't see any obvious options to select HDMI output. The manual says press Fn F7 but when I select the external options there is no second monitor detected and again I can't see any options to select it. Any suggestions what to look at? Thanks, Pete.

    I've tried another monitor and still no luck. Either there is some setting I'm missing for the Intel HD output, or I wonder if my HDMI output is faulty. Any ideas what to look for in the device manager or troubleshooting steps I can do? Thanks, Pete.

  • Dvd/vcr hdmi output to iMach

    Can I get HDMI output from a Toshiba VCR/DVD player/recorder to play on my IMac (21.5/mid-2011)?   If so, what kind of connector or converer do I need?  Can it be a simple as an HDMI to Thunderbolt displayport connecter? 

    Hi protagonyst,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see you have been connecting your TV via HDMI to the notebook for the last two years. You have always been able to disconnect and reconnect the TV without issue, but today you get the message no input.  You have already completed the troubleshooting steps to no avail.  When you turned on the TV and then the PC and you had the Windows logo come up, it is receiving a signal, but looses it once the driver is installed. Here are the two suggestions I have. You can try reinstalling the original driver using the HP Recovery Manager.  Using Recovery Manager to Restore Software and Drivers (Windows 8). If that is not successful, I would do a full recovery.  Performing an HP System Recovery (Windows 8).
    If you would like additional help. please provide your exact model of HP G6 you have. How Do I Find My Model Number or Product Number? 
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Canon 70D Uncompressed Clean HDMI Output

    The Canon 5D Mark III received a firmware upgrade to provide uncompressed clean HDMI output. When will Canon release an upgrade to allow for uncompressed clean HDMI output for the Canon 70D? The autofocus and ability to record past 4GB are great but I would love to take advantage of an external montior/recorder like the Atomos Ninja Blade. Using Magic Lantern is not something I'd like to do as I would rather stay away from adding external apps to my device. I can't use the Ninja Blade unless the device has clean HDMI output. I think this would take this SLR to the next level. 
    Any idea on when this upgrade will be available for the Canon 70D?

    Yes i would like to see a uncompressed clean HDMI output from my Canon 70D.
    Is there a firmware update coming out any time soon ???

  • Split HDMI Output to 2 HD TVs

    I am trying to split the HDMI output from my Motorola 6416 HD DVR to 2 HDTVs using RocketFish Two-Way HDMI spillter.  The splitter is HDCP compliant.  However, when attempting send the signal to both TVs the apparently the handshake gets messed up resulting in DU1 error on the box.  After resetting the box I can watch one TV at a time.
    Has anyone had success splitting HDMI to 2 TVs?  If so, what splitter did you use?
    Thanks,
    Matt

    Is that splitter powered by any chance? Becuase I use this  from Monoprice with the same setup and it work perfectly. There are a few others in the same cat. and they all work well.

  • No audio from HDMI output because High Definition Audio Driver cannot start (Envy 17 Quad)

    Ever since I first bought this laptop two months ago, the audio from the HDMI output has always been inconsistent. I remember it working a couple times, but there were more times when my audio driver didn't recognize that an HDMI cable was plugged in. Yes, I tried all the obvious: shutting down computer, checking disabled devices in Playback Devices, reinstalling drivers, etc. Now, when I plug an HDMI cable in, the video comes out fine but the IDT High Definition Audio CODEC does not recognize HDMI/my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall nor find a download from HP's website. How can I get audio through HDMI to my TV??
    This question was solved.
    View Solution.

    Hi,
    Please try:
       http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • 1080p from hdmi output?

    Do Toshiba laptops support 1080p from the hdmi output? I'm specifically looking at the C55-A5308 model but I would look at any model that can do 1080p.

    Toshiba has 32 laptops that claim 1080p. Use Toshiba's Finder. It's under Extras.
    -Jerry

  • What will make the picture from FCP studdering from the HDMI output, but not from the firewire output ?

    I have a Mac Mini 2010, 8G ram,running on Snow Leopard. I'm playing some video clips from FinalCut Pro 7.0.3. When I'm using the HDMI output,the picture will be studdering on a horizontal panning picture. This problem does not happen when I'm using the firewirw output, which I can't use anymore with my new playback system..
    Is there any setup I can use to fix this studdering?

    Sorry about that, have had no need for pasting output so far as I was using Ubuntu/Mint/Sabayon so could work most things out myself.  Thanks for letting me know   Also, please mark this post SOLVED as well as STUPID lol.  I removed Pulseaudio and went over my Alsamixer settings with a LOT more careful attention, discovered that something vital was not unmuted. Doh!!  Have to say, Arch is the best learning experience ever, though

  • Want 2.1 output from my MacMini via HDMI

    Does anyone know if I can set my mac mini to output 2.1 rather than 5.1 when using the HDMI output?
    I only have a right, left and subwoofer is this room.
    Thanx

    what app / software are you using? some preferences can specify the number of channels.
    and what are you outputing, a movie?
    do you have an a/v receiver?
    sometimes i watch a movie through hdmi and toslink the sound directly to the receiver, for 5.1
    then play a game, same setup, but indicate to the receiver, stereo. (which puts out 2.1 (on all 5 speakers, or 2 in your case))

  • AJA IoHD Issues

    Hello all, I have just received the new AJA IoHD box and wanted to know if certain problems that I am having are common or not and what I can do about them. Here is a list of my issues:
    1. HDMI output to monitor does not play audio, only a high pitched digital "noise" that sounds muffled.
    2. When I play a sequence in my Final Cut timeline and want to view it on my external monitor, it is delayed and the audio is out of sync. I know that there is a delay frame playback feature, but no matter what I change it to, it always seems like my audio is still a few frames out of sync. I am sending the video through HDMI and the audio is played on external speakers hooked up to the AJA.
    Here is a list of my tech specs:
    1. PowerMac G5 w/CPU Speed: 2.3 GHz, Memory: 2.5 GB
    2. Final Cut Studio 2
    3. Monitor is Insignia, model #: NS-27LCD

    Yes, I have loaded them, it didn't make any difference. I also have contacted AJA and they suggested that I first try different monitors to see if the problem persisted and it did so they sent me a brand new IoHD to see if mine was faulty, but it did the same thing as well. I am going to contact them again later today and will post what they tell me.

  • Blackmagic Design for HD (HDMI) monitoring from HDV?

    Would like to get some input on Blackmagic designs Intensity HDMI HD Editing Card.
    I was a little disappointed that my Sony HC3's HDMI output would not work with FCP have HDV (Firewire), but I found a good solution in the Blackmagic Designs Intensity that claims full support for HDMI monitoring in FCP (and I assume in Motion).
    Seems like a relatively cheap solution $250. http://www.guygraphics.com/GGPROD-67258.html
    The ability to record live HDMI input uncompressed via my Sony HC3 is definitely interesting (not sure how practical given this is a PCIe card for desktop Mac - perhaps in a studio situation).
    Thoughts?
    Thanks, Rob.

    I don't use HDMI for anything, only sdi or hdsdi if I'm in the digital world.
    Aja products are bullet proof and their tech support is bar none. I've installed many many many of their products in production facilities and control rooms and their quality is superb. I use many of their broadcast products, like the FS1 on a daily basis and I wish I had excuse to have an FS1 in my house.
    At home, I have an LHe in my 2006 design Mac Pro quad. If you can follow directions, maybe do a forum search, the slot choice is a non-existent issue. Sometimes they have an issue with their Kona software but this is mostly due to Apple's constant toxic QT updates and a quick phone call to Aja sorts these things out in an instant. Aja also has a very good forum presence on the Cow, something BM does not.
    Regarding HDMI, you'll need to find an hdsdi to hdmi adapter, like the [Hi5|http://www.aja.com/html/productsconvertersHI5.html] and yes, this all does cost more than BM products and the new Matrox MXO2 which seems to be a great product, but quite honestly, Aja products work out of the box, period.
    I make no compensation at all from this recommendation but it'd be great of Aja if they'd cut me a break on a Kona 3 this spring......

Maybe you are looking for