No hdmi sound option on pavilion dv3 4050ea

My pavilion dv3 4050ea does not have any option to output sound via HDMI (no SPDIF or HDMI options anywhere you would expect to find them on the system), but according to the specification it should be capable. I have checked for new drivers for video and audion cards and Windows reports the installed drivers are correct. Can anyone advise how I can fix this as I would like both sound and vision to output to my TV via HDMI?

Go to Control Panel-->Hardware and Sound-->Sound and on the Playback tab, go to the blank space under the last device, right click and tick show disabled devices. Hope this helps.

Similar Messages

  • No HDMI sound on HP Pavilion x360

    I am treying to connect my Pavilion x360 to a TV using an HDMI cable. I get the picture fine but no sound. There is no option to select HDMI output in the Beats Audio Control Panel or under the audio icon. What do I need to do to get Sound via HDMI?

    set defaultHDMI icon disappearedThe HDMI port cannot receive audio if the HDMI icon disappears from the sound properties in the Control Panel.To restore the HDMI icon, follow the steps below.Reinsert the HDMI cable into the HDMI port on the computer.After approximately 10 seconds, switch the audio source in the Control Panel.Click the Start button, type sound in the Search field, and select Sound from the list.On the Playback tab, select the HDMI audio device, click Set Default, and then click OK.The HDMI icon reappears in the sound properties in the Control Panel and the HDMI port can now receive audio.

  • No HDMI sound on TV - Pavilion dm4-1160us Entertainment Notebook

    I know there are a lot of post over this issue, but nothing is working for me.  i have a Pavilion dm4-1160us Entertainment Notebook running windows 7 64 bit.  I've uninstalled both the graphics and chip drivers and reinstalled (warning said the ones i was installing were older ver. than the one I had).  maybe I'm not finding the right drivers to install. There is no HDMI audio device listed on the computer. Audo devices that are listed are: IDT High Definition Audio CODEC for speakers and headphones.
    This question was solved.
    View Solution.

    Hi,
    My suggestion:
    Go to this site to download the required driver.
    Totally uninstall the Audio driver.
    Install driver from the downloaded file.
    Turn off the TV and laptop.
    Connect HDMI cable.
    Turn ON the TV first.
    Turn ON the laptop.
    Regards
    ps Many users have to do few tries and it turns ụp
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help to find out sound driver for HP pavilion dv3 Notebook PC Product number: LD936PA#UUF

    Hello everyone,
    My laptop is HP pavilion dv3 Notebook PC Product number: LD936PA#UUF
    My sound driver is uninstalled accidently and i dont have back up. So i need to download. But i cant find exact one. I have tried various one from hp support but all of them show me hardware detected unmatched. Can you help me to find out the exact one?
    Thanks advance.
    This question was solved.
    View Solution.

    Hi:
    This is the driver from your specific model's support page.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-89350-1&cc=us&dlc=en&lc=en&...

  • Problems with HDMI sound for Pavilion dv5 1192

    Hi
    When I connect the laptop to the TV no sound get out. I put HDMI sound as standard but still nothing. I don't know if it's something wrong with the driver for the sound. Please advise.
    Best regards

    It's likely that the laptop's attempting to output audio through the HDMI as well. Have you tried this? Right-click on the speaker icon in the notification area near the clock (in Desktop mode) and select "Playback devices." What's listed there, and what has the green check mark? Try selecting your speakers and clicking "Set Default."
    - Peter

  • Hdmi sound on my mac mini has stopped working after I upgraded the OS

    I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

    Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • DV7-1023CL no HDMI sound

    recently got my new DV7-1023CL computer.  When I plug the HDMI cable in, the picture works, but no sound is available.  I've tried switching the sound options around, but none work.  Additionally, although the sound panel shows Nvidia HDMI Output as an option, it says "not plugged in."  I've checked the seating numerous times of the cable, and have tried another cable as well, but same each time.  SPDIF doesn't work when you try to use that option either (shows it connected and the green bars go up and down for the test, but no sound).  Updated the software drivers but no luck there either.  Bad audio card or am I missing something here?  Thnx.

    You will need the IDT drivers for the speakers and realtek for the hdmi. Here is a link where you can find those drivers. http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-62438-1&prodTypeId=321957&prodSeriesId=3687621 In control panel, go to idt sound and turn off power save. If you don't the poping sounds will drive you crazy. Then go to the other icon for reguar sound and make realtek your primary output sound. When you plug your hdmi, your sound will go to the tv, when unplugged, the sound will go back to computer.

  • Sound option in the control panel

    I need to access my sound options within the control panel so I can set my sound for Skype but when I click on the 'sound' option nothing happens - I cannot open the sound menu - any ideas?
    I have a compaq cq5307uk
    windows 7 home premium 64 bit
    Thank you for any suggestions

    Hi lj2taylor,
    I'm not entirely sure which sound options you are talking about or where you are trying to open them from, so I'm not certain what troubleshooting steps to give you. However, here are some HP support documents for your PC related to sound issues: http://h10061.www1.hp.com/ccsearch/search?pname=cq5307uk&opname=HP+Pavilion+a1747c+Desktop+PC&qry=no...
    Perhaps one of these documents will help fix your issue?
    Let us know how it goes. 
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • HP Pavilion dv3 - LAN device missing from device manager

    This problem started between noon and 3:00 PM on Friday 2/18. My Realtek PCIe GBE Family Controller device, which allows me to connect to the Internet via Ethernet cable, stopped appearing in the Device Manager window. Furthermore, the only place where my computer can find the device is in MSInfo32.exe
    Name [00000007] Realtek PCIe GBE Family Controller
    Adapter Type Not Available
    Product Type Realtek PCIe GBE Family Controller
    Installed Yes
    PNP Device ID Not Available
    Last Reset 2/18/2011 5:30 PM
    Index 7
    Service Name RTL8167
    IP Address Not Available
    IP Subnet Not Available
    Default IP Gateway Not Available
    DHCP Enabled Yes
    DHCP Server Not Available
    DHCP Lease Expires Not Available
    DHCP Lease Obtained Not Available
    MAC Address Not Available
    ***NOTE*** The Driver line was NOT FOUND in this entry, indicating that the driver is either missing or the system can no longer find it.
    I am able to connect via wireless, though my signal strength with the nearest hotspot is 2 out of 5 bars at its best.
    Could you send me a direct download link for the driver installation software that works best for my system? I have an HP Pavilion dv3-1075us machine running Windows 7 Home Premium x64. Processor is AMD Turion x2 64-bit.

    Hi,
    this happened to me also.
    Name [00000019] Realtek PCIe GBE Family Controller
    Adapter Type Not Available
    Product Type Realtek PCIe GBE Family Controller
    Installed Yes
    PNP Device ID Not Available
    Last Reset 21-02-2012 14:18
    Index 19
    Service Name RTL8167
    IP Address Not Available
    IP Subnet Not Available
    Default IP Gateway Not Available
    DHCP Enabled Yes
    DHCP Server Not Available
    DHCP Lease Expires Not Available
    DHCP Lease Obtained Not Available
    MAC Address Not Available
    My system is a HP Envy 14 - 1240ep. I'm using BIOS F.23, I tried F.26, but the BIOS update didn't solve the problem.
    I tried Disabling the BIOS option for LAN sleep mode, but that disn't solve it neither.
    I have a clean install of Win7 Pro 64-bits, and tried to install the original SwSetup NIC dirvers (however, since I've got the error for unplugged cable, I'm not sure if everything went ok).
    My NIC is in "comma" for 2 weeks now. During the past 2-3 months it would work sometimes after the cable was plugged in for 3-4 hours. In spite of turning on it would go off after any stand-by, restart or shutdown.
    I'm starting to get empty of ideas to crack this problem.
    Any suggestion?
    BR,
    JQ

  • [SOLVED] no hdmi sound (Radeon HD 7700/7800 Series)

    Pulseaudio detects the sound card, and paplay gives sound but totem or youtube movies doesn't give any sound. Gnome sound volume test gives sound though. What should I do to fix the hdmi sound?
    'pactl list sinks' shows:
    Sink #0
    State: RUNNING
    Name: alsa_output.pci-0000_07_00.1.hdmi-stereo
    Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 6
    Mute: no
    Volume: front-left: 43861 / 67% / -10.46 dB, front-right: 43861 / 67% / -10.46 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
    Latency: 1182766 usec, configured 1999818 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "1"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:07:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aab0"
    device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    device.string = "hdmi:1"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100300"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
    Active Port: hdmi-output-0
    Formats:
    pcm
    Sink #1
    State: SUSPENDED
    Name: alsa_output.pci-0000_00_14.2.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 50112 / 76% / -6.99 dB, front-right: 50112 / 76% / -6.99 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC892 Analog"
    alsa.id = "ALC892 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "0"
    alsa.card_name = "HDA ATI SB"
    alsa.long_card_name = "HDA ATI SB at 0xfeb00000 irq 16"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:14.2"
    sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "4383"
    device.product.name = "SBx00 Azalia (Intel HDA)"
    device.form_factor = "internal"
    device.string = "front:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC892"
    alsa.components = "HDA:10ec0892,10438436,00100302"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    analog-output-lineout: Line Out (priority: 9900, not available)
    analog-output-headphones: Headphones (priority: 9000, not available)
    Active Port: analog-output-lineout
    Formats:
    pcm
    'pactl list short sinks' shows:
    0 alsa_output.pci-0000_07_00.1.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    1 alsa_output.pci-0000_00_14.2.analog-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    I've already tried to comment "load-module module-suspend-on-idle" in /etc/pulse/default.pa file, but it shows idle instead of suspended. Anyone have any idea what might be wrong with the pulseaudio?
    Last edited by ahcaliskan (2015-05-19 15:45:53)

    Sound still not working. Here is the pulseaudio output:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: setpriority() worked.
    I: [pulseaudio] core-util.c: Successfully acquired nice level -10, which is lower than the requested -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 4.0.3 #1 SMP PREEMPT Thu May 14 08:58:24 UTC 2015
    D: [pulseaudio] main.c: Found 8 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is 95303e48bec149d190471b0a51ab134e.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/ahc/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] alsa-util.c: Trying hw:1,3 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:1,3
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hw:1,3.
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: sink:alsa_output.hw_1_3
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.hw_1_3" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:07:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aab0"
    I: [pulseaudio] sink.c: device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.string = "hw:1,3"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: source:alsa_output.hw_1_3.monitor
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: source:alsa_output.hw_1_3.monitor:null
    I: [pulseaudio] source.c: Created source 0 "alsa_output.hw_1_3.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87310
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: tstamp_type : MONOTONIC
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
    D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] module.c: Loaded "module-alsa-sink" (index: #5; argument: "device=hw:1,3").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-6.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1 is busy: yes
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 927ea15335ea5cfa45d57cb0555b4740 as :1.28
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf'
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0x1134570, direction=2
    D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-linein (Line In), direction=2, priority=81, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Line (analog-input-linein/analog-input-linein) index=2, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Line, alsa_name='Line Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Line Phantom, alsa_name='Line Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-linein (analog-input-linein) priority=0
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop S

  • Macbook Pro Retina Display hdmi sound out.

    Hi everyone,
    Does the MBP Retina have hdmi/sound out?
    When I connected it to my HDTV the image was ok, but there wasn't any sound on my sound system. The only sound was through the mac's speaker's.
    Is there any way to solve this problem?
    Cheers,

    Go into the Sound Option in Sys Prefs and select the HDMI as the output source.

  • There is no 5.1 OVER HDMI on the HP PAVILION DV7 only two channel stereo!!!

    Dear HP
    I have a Pavilion dv7 laptop.
    I am able to connect my laptop via HDMI to my Samsung 55 LED. Video transfer is in HD. Sound is also transmitted but only in 2 channel format rather than 5.1 channel format. In the sound settings via control panel I have tried to reconfigure but there is only a 2ch and no 5.1ch setting. The same is the case in the 'Speakers and Headphones' (IDT High Definition Audio CODEC) setting
    The 5.1ch output setting should be present as Windows 7 professional is compatible with this as should be my laptop, and my TV has an inbuilt Dolby Digital processor which conveys 5.1Ch sound to my home cinema unit.
    My home cinema system DOES support and decode Dolby & DTS 5.1. This is connected to my TV via optical cable.
    TV transmissions from Freesat that are in Dolby Digital 5.1 do output correctly in 5.1 via my home cinema system, this is why I know for a fact that my TV DOES output in Dolby Digital 5.1. There is a light on my Home cinema system which confirm the inputted sound is 2ch or 5.1ch.
    There is no error with my TV or Home cinema System - there is a problem with my Pavilion laptop failing to output 5.1.
    Please help!
    Many thanks

    Hi,
    DV7 is a series of dozens if not hundreds of models, what is yours ? Please bear in mind normally HDMI sound on computers go from video cards, not "sound" cards.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Radeon HD 5850 can't get HDMI sound + openCL + dual moniter

    So i have a Radeon HD 5850 and so far I have only been able to get the dual moniters working with the free driver, and the HDMI sound working with the propritery drivers.
    I am not afraid to downgrade packages, but currently I am on the free drivers and flash isn't working, openCL isn't working and HDMI sound isn't working.
    What version of the drivers should I get?

    Hi I have HD4850 and HDMI sound used to work nice with free driver and dual monitor setup  - I had to add kernel option radeon.audio=1 and
    ensure sound is unmuted.
    I have been using this ( xbmc running on 2nd screen ) for long time.
    After kernel update from 3.9 to 3.10 my  system stopped booting with that option though.
    They say opencl is not supported with free driver.
    So you can give a try with radeon.audio=1 anyway, just have boot option to start also without it
    in case you get 'boot to death' like me on 3.10-x.

  • Satellite A300-1LT - I must manual activate HDMI sound

    Hi to all,
    This program (HDMI manager) don't work for me, I must manual activate HDMI sound and when I want to connect or disconnect display they don't recognize when I plug cable.
    So everything must manual(media centar connect display...)
    Install and uninstall progam don't help...
    Thanx

    > I always connect cable when my pc and tv ON
    Then connect the device with the HDMI cable when both devices are OFF
    On your notebook you can find the application called Toshiba HDMI Control.
    There you can enable the option called Enable HDMI controll and can enable the further settings like:
    +Allow this PC to be power on and off by a TV which supports HDMI control+
    and
    +Allow the PC to be powered off by a TV which supports HDMI Control when the TV is powered off.+
    The option called HDMI Control can be used ONLY if your LCD (external TV) supports the HDMI Control feature. If the LCD does not support such feature then this option is not useful!
    Greetings

  • Lenovo Yoga 2 Windows no hdmi sound

    Hello,i have a little problem with my Yoga.If i connect my Yoga with my TV via hdmi, i have no sound (screen works)I hve this problem under Win 8.1 and also with Win 10.Under Sound Options is only the Speaker (Intel SST Audio Device) availabel. Nothing with HDMi Sound or Digital sound.Right Click - deaktivated devices is set.I have checkt the HDMI Cable,it is ok.There is no sound. just video.An driver update doesnt solved the problem.I hope anybody can help me.sorry for my bad english.Best regards H. 

    You can run some tests from here to check if its a motherboard connection problem -
    http://support.lenovo.com/us/en/lenovodiagnosticso​lutions/downloads
    Could be that just a wire is loose inside the laptop, As you say you are a intermediate/advanced PC user, you can open it up and check for loose connections. Here is the manual link -
    http://download.lenovo.com/consumer/mobiles_pub/le​novo_yoga_2_pro_hmm.pdf
    Lenovo's warranty can be extended, i believe if you were having issues, you should have extended it. Sorry about the laptop condition now.
    My suggestion is to take a look inside and see if it seems like a fixable problem. If not, buy and use external speakers.
    I am sure there are no manufacturers who would fix a laptop without being paid if it is no longer in warranty (and problems can happen with any laptop)
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

Maybe you are looking for

  • Open and Network-EAP authentication - difference in security?

    As far as security goes, and assuming Radius authentication wil actually authenticate and allow users access to the wireless network (or not), it there any difference (once again, as far as security goes), between Open Authentication and Network-EAP

  • Adobe Acrobat X Pro does not open after installing CS6

    I successfully installed CS6 & Web Premium package. I found I could not open .pdf files so I reloaded Adobe Reader X and now realize I cannot open Adobe Acrobat X Pro to create .pdf files. Reinstalled Acrobat again this evening, restarted computer bu

  • Noob on overclocking here,,,,,,,, hello?

    Finally decided to give the overclocking a try. Just installed a Thermaltake Volcano 11 on my Build #2. I am going to attempt to crank it up a little. Now I understand this much, I should give the thermal paste (Artic Silver 5) a while to set in, so

  • File Read/Write Help Please!

    Hi, I am trying to get my program to write an object (or just its varibles) to a file and then be able to read them out again and assign them to their title. i.e be able to read String bo, int car, and int[][] cost to a file (doesn't matter what as l

  • Data not printing in adobe form

    Hi, I have copied standard interface PTRV_EXPENSE_FORM to Z interface and assigned the Z interface in my Z form. I have created an internal table  GT_HISTORY in Global data. I moved the data from existing table to Global internal table GT_HISTORY in