No HDV Editing After 5.0.2 Update

After I updated I cannot edit in HDV only DV. I don't have the option and therefore Premiere won't let me open up previous High Definition projects that I was working on before. I was also experiencing the bloating problem and one of my projects is about 1.5 GBs. I was curious if we can get the HDV working whether or not I simply try to open the project and when I save it again will it be small again. Thank you for your help.

I, and a number of other folks, had this same issue after the update. I appears that CS5 might lapse back into 'demo mode' for some reason on a number of machines. The only way I was able to get it to work again, was to uninstall, run the Adobe supplied "Clean CS5" script, then reinstall the whole package.
There's another thread here about missing codecs after the update which has a better rundown on the fix.
Here's the link:
http://forums.adobe.com/thread/713371?tstart=0
Good luck.
Chris

Similar Messages

IPad2 Issues after iOS 8.1 update

iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update. nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't respond.
photos - (which I use daily to show clients examples) will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos on my iPad2
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
Overall - the touch screen is glitchy since the iOS 8.1 update. It was slow after the iOS 8.0 update but has become almost unusable after the 8.1 update.
I cannot afford to purchase a new iPad. And I really need to find a way to make this one work.
I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
Any ideas would be appreciated   Thank you in advance for your help
Deborah

zooga wrote:
safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again? I've read a few posts that this may be a workaround for that issue.

[SOLVED] Conky: After 2.6.37 update, conky no longer shows temperature

Well, the title is quite self-explanatory but I'd also like to add that:
I noticed that conky reads correct values and after exactly 3 refreshes it just displays 0, no matter how long is the update interval.
/sys/class/hwmon displays correct values, and 'acpi -t' also does too (they are always the same).
My conky config had $acpitemp before the update, and after the update I had to change it to ${hwmon 0 temp 1} because $acpitemp displayed no values whatsoever.
My .conkyrc in case anyone is interested:
out_to_x no
alignment bottom_left
background no
border_width 0
cpu_avg_samples 2
default_color white
default_outline_color white
default_shade_color white
disable_auto_reload yes
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
double_buffer yes
use_xft yes
xftfont Clean:size=10
gap_x 0
gap_y 0
minimum_size 5 15
net_avg_samples 2
no_buffers no
out_to_stderr no
extra_newline no
own_window no
own_window_class Conky
own_window_type desktop
own_window_transparent no
own_window_colour 222222
stippled_borders 0
update_interval 2
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no
out_to_console yes
TEXT
${hwmon 0 temp 1}C \
$battery \
${wireless_essid wlan0} (${wireless_link_qual_perc wlan0}%) \
$if_mpd_playing \
${mpd_smart 30}\
$endif \
| ${time %a %d %b %Y %H:%M}
My final conclusion is that the problem is with conky itself, but this guy here managed to get it working:
https://bbs.archlinux.org/viewtopic.php?id=111408
EDIT: After posting here I thought "why don't I take out all these X related options?" and finally did it after so much time. And it worked, but I dunno why.
I also tried your suggestion, litemov, but it didn't show anything at all (not even that 0), but thanks anyway
Final .conkyrc
out_to_x no
update_interval 2
out_to_console yes
TEXT
${hwmon 0 temp 1}C \
$battery \
${wireless_essid wlan0} (${wireless_link_qual_perc wlan0}%) \
$if_mpd_playing \
${mpd_smart 30}\
$endif \
| ${time %a %d %b %Y %H:%M}
Last edited by Fadel (2011-01-31 18:45:50)

I'm using:
${platform coretemp.0 temp 1}
Does that do anything for you?

Video Flicker & Creation of SD DVD (16:9) from a HDV edit...

Hi Everyone,
We have just completed a project on HDV.
Shot on HDV using Sony FX1E
HDV Edit using FCP HD
Video Card is Declink HD Extreme.
Problem 1:
Flicker while we render video:
When we render the timeline, the rendered output some times has a flicker that appears. It happens to everything, video, background animation done using motion anything you name. Then if we re-render the same, it goes off next time itself or sometime later. Not quite sure when and why ? We have to check to ensure no flickering is there before we step into the next stage.
The only problem that i could think of is. We have only 1 harddisk in the system. So the OS is in the same drive in which the project is also getting executed.
Problem 2:
Creation of SD DVD (16:9) after finishing HDV edit.
Compressor, the **** product is a royal waste or is that we do not know how to use it. or should we be using something else to make a SD DVD from a HDV edit.
We completed the project by taking a Uncompressed movie output and taking it into another Matrox sytem and created a SD DVD using Adobe Encore DVD. So the job got over, but what is the way to do the same in FCP & DVD Studio PRO.
Making a HD DVD is perfect, we tried that and it worked well.
We look forward to the comments from all you experts.
Thanks in advance.
S.Venkatesh
Power MAC G5 Mac OS X (10.4) Decklink HD Extreme - Video Card

One of the interesting and clever things about OSX is that data is not necessarily written to disk when you think it is - it first goes into a buffer and the buffer is written to disk at times of the OS's choosing. This allows the OS to handle multiple tasks etc. 'at the same time' - it stores things up and then milliseconds or perhaps seconds later writes them to disk. Remember that this includes all processes - and when OSX is running there might easily be literally hundreds of separate little OS-level programs running, all needing to do this or that with files on disk, not just the programmes you think you have running, like FCP or Safari.
The net result of this is that you have no control over when the disk is needed by the OS - and although this isn't a problem normally if you're using Safari or Word or something, when you are handling streaming media like video, it can be a very big problem. If you are playing a piece of video (which must maintain a constant data rate) and the system absolutely HAS to do something to or from disk, your video playback can take a hit, skipping a few frames. If this happened on a long playout to client it would be uncomfortable, but if it happened on your delivery master it could be horrendous.
If you keep your media on a separate disk, the problem disappears, as OSX can do whatever it needs without interrupting the flow of video off the other drive.
So don't so it, it's just waiting to bite you in the a55.

USB Hard Drive Disappears after 10.6.3 update

My Samsung S2 640 GB USB portable hard drive is missing from Desktop, Finder and Disk Utility-- but visible in System Profiler after 10.6.3 update. It was fine before the update.
Plugged directly into rear of iMac, I changed cables and slots-- no joy. Even tried a double USB cable as there is no external power supply.
Four other USB HDs work just fine in all slots om the iMac , and this Samsung S2 works fine in my MacBook SL 10.6.3
I bought an identical Samsung S2 and it had the same problems-- so it's not the drive.
Suggestions?
Message was edited by: Patrick Cleburne

Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

After download a new update I cannot FaceTime

I cannot communicate with Face time with my friend who has iPAd 2 after downloading a new update from 18/07.

Howdy Inessazhk,
I found this article while researching FaceTime for you named FaceTime for Mac: Troubleshooting FaceTime found here http://support.apple.com/kb/ts4185
Troubleshooting FaceTime for Mac
You can make FaceTime calls using the FaceTime app. You can call FaceTime users whose contact information is in Contacts. You can add contacts and edit contact information in either FaceTime or Contacts. To place a video call, you may use a phone number or email address.
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
All the very best,
Sterling

Unable to save PDF file to local drive from sap after Above reader XI update.(Not as sap issue ,this is related to Adobe)

Hi All,
Users are unable to download/save file from sap after a adobe XI update.(no pop comes to save/open)
Surprisingly,i am able to do so on my system without any adobe plug ins disabled or any registry editing.
This is a strange behaviour and need to be resolved Asap....
I contacted sap..this is not sap issue..this is a pure adobe reader bug.
Please need help on this experts
Feel free to comment for further details
kind Regards,
Sumit
Mail me at [email protected]

Hi ,
Please tell us a lot more.
- Is SAP running a local process, or something in a web browser?
sap is running via SAPGUI ,no java system
- What system?
Users facing issue in all system
- What browser?
IE 9.0.28
- Can PDFs from other sources be downloaded?
Yes,they are downloaded.
More Details-I did some tricks below which resulted in open/save popup......tht is not recomended by IT team...i need a permanent solution
In IE, goto menu Options -> "Manage
Addons", select in box "Show:" "Run without
permission", then you see the Adobe PDF plugin
Ichanged status to "Disabled
Also, if i change the registry key settings for users as
HKEY_CLASSES_ROOT\AcroExch.Document.11
Value: EditFlags
Changed: 0x00000100
to 0x00000000
(Remove the "Open always with this
program" option)
ITS WORKING.....
But,in my system i need not to do all this settings and surprisingly it is working only for me,rest all users are facing this issue.....
If any one using Lync ,communicator ..do let me know..i wil show the actual scnerio.
Kind Regards,
Sumit

After I tried to update my ipod to iOS 5, my ipod screen turned to the screen of the cherger cord pointing to the iTunes symbol. when I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and i did download t

After I tried to update my iPod 4 to iOS 5, my screen turned to the USB cord pointing to the iTunes symbol. When I try to restore it, it says that the 3014 error has occured. I went to check for support on iTunes and I did download the latest version of iTunes (11.1.1). I tried to restore it again and the same error occured. I dont understand half of the instructions for the resolution of the 3014 error code so I did the instructions that I understood and nothing has changed. Please tell me how I can fix it.

Just what do you not understand?
Did you try:
Try to restore from another known-good computer and network.
Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Parameter field still editable after setting flag 'PropFlags_NotEditable'?

Hi,
Parameter field still editable after setting flag ‘PropFlags_NotEditable’?
I have defined a step type with a string parameter. (MyParameter). This parameter field has to contain custom generated data, stuffed from a code module.
I want to have ‘MyParameter’ read only for all instances of the step in my sequence.
I have set the property flag ‘PropFlags_NotEditable’ for ‘MyParameter’ in my step type definition, because I want to have this parameter read only in all instances.
When I try to edit ‘MyParameter’ field in an instance of the step in the sequence in the variable pane ‘Step’ - ‘MyParameter’, it still works?
What is wrong here, I suppose this should work?
Best regards

1) Make sure you have show hidden properties turned on in the station options, preferences tab.
2) In your step type expand the variables to the place where the expression is stored for the parameter argument. In the .NET adapter this would be something like the following:TS.SData.Call.Params[0].ArgVal. Right-click on ArgVal and select the Properties menu item.
3) Click on the advanced button and select flags.
4) When the edit flags dialog pops up, click on the Type Flags button.
5) Check the PropFlags_NotEditable flag for the Instance Default Flags section. Click OK on this dialog.
6) If you want the change to effect currently open instances I think checking the "Reset Flags... " checkbox on the edit flags dialog will do this, otherwise this change will only effect new instances of your step type. Press ok on the remaining dialogs.
7) New instances will now not allow editing that value. NOTE: This only works for the sequence editor module panel though. It does not work for the dialog version used by the user-interfaces.
One thing I want to make sure you are aware of for step types is that using a default code module like this has drawbacks versus using postsubsteps. Setting the default code module doesn't keep the user from changing the specification after they insert the step, also updating existing steps if you want to change the prototype is more problematic. You might be better off with a design more like the step types that ship with teststand like the message popup step type (which also ship with source code so you can see how they are implemented) which instead use post-substeps and edit-substeps and instead designate the none adapter for the step type so that the step type can never have a code module. What they do instead is their edit substeps display a dialog that gets the settings/parameters to the operation that the step type performs and stores those as subproperties of the step. Then at runtime the post-substep gets this information and executes the necessary code. Unlike the default code module setting, changing the substeps in a step type automatically effects all existing instances of the step. Changing the code module only effects new instances, and loaded instances if you check the checkbox for that.
Hope this helps,
-Doug
Message Edited by dug9000 on 04-16-2010 09:58 AM

When I try to read a PDF file, the window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?

Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

How to clear cache after mime object is updated?

Hi Expert,
    I create a mime object (such as "test1.jpg") in mime repository.
   In web dynpro, I add two UI elements: a formatted text edit and a File-Upload "Insert Image",
   after I click the File-Upload "Insert Image",
   I select an image file (such as test2.jpg) from local directory, and upload the content of the image file to mime object(test1.jpg) in mime repository.
   at the same time, I insert a line into formatted-text-edit as "<img src="/SAP/Public/.../test1.jpg" />".
   I double click the mime object (test1.jpg), its content has changed as test2.jpg,
   however, formatted-text-edit still displays the content of test1.jpg.
   When I mannually clear the cache of IE, and refresh the web, Formatted-text-edit display the content of test2.jpg.
It's obvious that the cache of http server isn't cleared.
How to clear cache after mime object is updated?
Any suggestions are welcomed.
Thank you.
Best Regards,
Derek
P.S. the source code:
lv_url = '/SAP/BC/WebDynpro/SAP/ZENHANCE_IA/test1.jpg'.
lo_mine_rep = cl_mime_repository_api=>get_api( ).
lo_mine_rep->put(
    EXPORTING
      i_url     = lv_url
      i_content = lv_file_string ).
Edited by: Derek Zhao on Sep 20, 2010 6:21 AM

Hi Derek,
Have you tried the method INVALIDATE_ICM_CACHE of class CL_MIME_REPOSITORY_API ?
Regards,
Anand

No FireWire after 10.5.6 update

my LaCie external HD cannot be mount after 10.5.6 update.
i.e. can't mount by firewire 400/800
only work for USB
do U know how to solve it?

Uncle D wrote:
Has probably something to do with one of the latest OS X updates, because I've used this disk with Time Machine now more than a year and never had a problem.
Then why are all my LaCie d2s fine, including the TM LaCie?
Have you tried resetting the firewire ports as I mentioned? Also, try this:
Launch/Utilities/Terminal and enter this command at the prompt:diskutil listPress return. If it sees the disk, note the number of the disk (far left column) you want to unmount.
Then, enter this command:mount /dev/(number of disk)Press return. Just enter the number without parenthesis.
-mj
Message was edited by: macjack

After 10.6.4 update, right bracket char auto inserting & idle time issue

New to Macs, so no clue what's going on... several issues after installing the latest update. 1) intermittently, when trying to type in the Safari address box or search box, the right bracket character starts to type by itself automatically and continuously until someone clicks on desktop to stop it. With sound on, this makes the noise as if someone is pressing a key on the keyboard continuously and quickly hundreds of times. 2) When the iMac is idle for a few hours, we come home or wake up to find this "pressing keys continuously" noise happening all by itself. It appears to stop if you click on the desktop, but then happens again and again when you start to use any program (mail, safari, etc.) 3) Also experiencing the slow blue progress bar in Safari, which I've seen mentioned in other 10.6.4 update posts.

Create a new admin user account, log into it, and see if the problem persists. You haven't posted any info about any 3rd-party apps or add-ons. If no one's spilled anything onto the keyboard, you might have a defective one. For that call AppleCare. If the new account doesn't fix it, download and install the 10.6.4 COMBO update, repair permissions, and restart.
Once you sort things out, see:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

No HDV Editing After 5.0.2 Update

Similar Messages

Maybe you are looking for