No Help! (Admin PW, privileges etc.) Next step advice to wipe HD!
O.K. this is frustrating. What is the easiest/best way to save files, folders for back-up when/if I wipe my HD1 drive totally and start from scratch? Software like Skype, iTunes, Miro, QT, VLC, Azureus/Vuze, Windows Media PLayer, Real Player, Max, Radio Recorder, MPlayer etc. can be DL from the net....but what about Mail (addresses) Safari/Firefox (Bookmarks) etc.
Thanks but not getting anywhere trying to re-set my admin PW, or getting privileges etc....
or any other suggestions? thank you
Hi Again....sorry last night under the stress of not getting the Mac going perhaps I can't/couldn't explain clearly.
I made a mistake.... and ended up with re-installing SL 10.6.1. (although I had already had SL up-dates all the way up to 10.6.6.
I somehow (this I can't explain) changed my Administration PW and Login PW (Keychains) which seem to have made my HD1 locked.
So, I can't print (Canon), or use Office for Mac (need to send in my pay sheet for Jan. today), use iTunes. (although my songs are all on HD2 (the file iTunes library can not be read because it was created with a newer version of iTunes)....
Disk Utility (when repair/verify permissions) shows "insufficient privileges"!
My clock can not be set to my time (Japan time-I live near Tokyo) and is set to L.A. (USA) time...when I try to authenticate, (click on the gold lock-within a few seconds-the lock stays locked) at least before I could write my name & PW in....
So, I feel that instead of trying to find the problem...I also tried the online HELP articles concerning re-set Admin PW or Keychain etc but to no avail.
So, If I WIPE the whole HD1 hard drive clean. How do I back up what I have? Just drag and drop into my external hard drive? Won't the same problems occur? Any suggestions? thank you
Similar Messages
-
Logic board failiure suspected, next step advice needed
I've had an iMac for about 6 years now. It's an early 2008 edition running 2.66 ghz intel core 2 duo, 2gb 800 mhz (i don't know how much of that is important, i've just copied down what I had available). I had it for a year when it suffered a hard drive failure which was subsequently replaced (i think, could have been repaired).
Lately i'd been having a few problems with it. The screen came up with a checkered green pattern which took a safe mode reboot to get rid of. A graphics card failure said the internet, but it only happened once. This probably should have made me take more notice. The mac in general has been... Off it's game so to speak. DVDs wouldn't register and would get spat out, or they would crash the player in the middle of a film. Quicktime would freeze every so often, and it would cause other programs to freeze up as a result. I took a massive amount of files off, deleting them or moving to an external drive. I was getting things tidied up enough to do a backup (which i freely admit I have never done, because i am an idiot) when waking it up from sleep resulted in a plain black screen, nothing else. I shut it down. Turning it on this morning and whilst I can hear the fan and the drive start up, there is no chime and the screen remains black.
I've tried a PRAM startup and SMC but neither have worked. I don't have an external monitor to try checking anything as suggested on some websites. So I assume I'm looking at a failed logic board. It doesn't look like it's something that can be fixed easily, so my real questions are less of what do I do now, more what are my best options?
Do I try and get the board fixed or replaced? How much is that going to cost and would the other issues i have had be related to it, or another thing that would need fixing (like the graphics card)?
I'm still operating on 10.5.8 and i'd need to buy at least one middle OS in order to upgrade to the newest version. Would I be better off buying a new imac? It's a horrible analogy, but do i "buy a new car, or try to get by replacing the engine and parts all the time". My nearest Apple store is smack bang in the middle of the christmas shopping central, so getting there is a bit of trouble right now.
Depend on the answers I get, i'll have further questions regarding selling/getting rid of an old mac.
Very much appreciate all your replies.
- DanYou have a 7 and almost 8 year old machine, unless you can find the parts very inexpensively and you have the expertise to repair it, it likely is not worth taking to an AASP to be repaired.
-
I had mapped org structure for rollout what is the next step need to do
Hi,
I am doing the roll out project, I had mapped the organisation structure in CRM and mapped asper the R/3 .
Some one can help me what is my next steps i need to do.
Explain me step by step.
Your help will be appreciated inadvance.
Thanks
MustafaHello Mustafa,
Can you check the following links
http://help.sap.com/saphelp_crm70/helpdata/EN/b4/4d7b3c513d3311e10000000a114084/content.htm
http://help.sap.com/saphelp_crm70/helpdata/EN/46/57605301a208e7e10000000a114a6b/frameset.htm
thanks
Willie -
I am a teacher of mathematics and i have a windows pc, but i want to do the next step. I want to buy an iMac. I want to learn how to write mathematical equations and how to do geometrical schema in my documents with iMac. Help me please!!! Thank you very much!!!
Bonjour VAGRAI
1) To write math expressions in a text :
— Microsoft Office 2011 etc. for Mac use its included Equation Editor.
— OpenOffice.org (OOo) and NeoOffice : download free Dmath 3.3.
— iWork (Pages, Numbers, Keynote), download free MathType 6.7, fully functional for 30 days, then becomes « Lite » for life as good as the Microsoft equation editor ; it’s better than using Grapher’s equation editor (Applications > Utilities) because MathType can be called from Pages and allows editing equations by clicking the math expressions your text (details on MathType website) .
— Graph.app 2.3 in Mountain Lion is built to draw curves and surfaces from equations, so it uses an equation editor less powerful than mathType, but it’s easier typing expressions. You may get 2D 3D geometrical drawings from clever equations. Suggest a glance at http://y.barois.free.fr/grapher/ to know all about Grapher (83 pages Instructions for Use - Grapher) and some examples
2) Geometrical schema :
— GeoGebra is very popular and used by math teachers.
— Google SketchUp 8 was not built for mathematics but for architecture, but it’s very easy using it to draw 2D 3D surfaces and solid figures.
— ShapeOnYou.app allows simples geometrical figures http://pierre.chachatelier.fr/programmation/shapeonyou_en.php
3) Some useful websites for screen shots of geometrical schema :
http://www.mathcurve.com/
http://perso.orange.fr/roger.assouly/
Drawings files PDF, TIFF, JPG … can be inserted in an iWork window (Pages).
I hate LaTex : not necessary to write math books !
Au revoir VAGRAI,
YB24
Attachment : lines and curves were made with Google SketchUp 8, screen copied (Command-Shift-4), inserted on a Pages sheet to add letters figures rectangles title.
SketchUp allows drawing precisely an arc of circle 325 mm radius 22,5° angle for instance. -
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
Help figuring out the next step
Credit card became invalid and so I needed to resign up. I created a different log in and pass word because I couldn't remember the original log in and pass. I have already paid for a new subscription and removed and redownloaded skype but when I try to use skype it says I need a subscription. I need help figuring out the next step because it won't let me skype to a mobile in Togo Africia and I have already paid for a new subscription with my new credit card. Help!! Donna
you can visit the link below for instructions on how to check the status of your current order;
https://support.skype.com/en/faq/FA288/what-is-the-status-of-my-order
if you need further assistance, you can also try to contact customer service. Just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES -
Pls help me... what is next step ?
I am trying to fix missing MSI file ? what is next step?
I got this ouput . after executingbelow command :
Cscript FindSQLInstalls.vbs %computername%_sql_install_details.txt
output.text file
Products installed on the local system
================================================================================
PRODUCT NAME : Sql Server Customer Experience Improvement Program
================================================================================
Product Code: {93998800-1608-403F-9A51-420A77D23C25}
Version : 10.50.1600.1
Most Current Install Date: 20130729
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\008899398061F304A91524A0772DC352\SourceList
Package : sqlsqm.msi
Install Source: \x86\setup\
LastUsedSource: n;1;E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
!!!! sqlsqm.msi DOES NOT exist on the path in the path E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\ !!!!
Action needed, re-establish the path to E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
Installer Cache File: C:\Windows\Installer\1cca5bb.msi
!!!! C:\Windows\Installer\1cca5bb.msi DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy the missing file or manually
replace the problem file overwriting it is exist:
Copy "E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sqlsqm.msi" C:\Windows\Installer\1cca5bb.msi
Replace the existing file if prompted to do so.
Sql Server Customer Experience Improvement Program Patches Installed
I got below output...now pls suggest.
=================================================
Products installed on the local system
================================================================================
PRODUCT NAME : Sql Server Customer Experience Improvement Program
================================================================================
Product Code: {93998800-1608-403F-9A51-420A77D23C25}
Version : 10.50.1600.1
Most Current Install Date: 20130729
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\008899398061F304A91524A0772DC352\SourceList
Package : sqlsqm.msi
Install Source: \x86\setup\
LastUsedSource: n;1;E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
!!!! sqlsqm.msi DOES NOT exist on the path in the path E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\ !!!!
Action needed, re-establish the path to E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
Installer Cache File: C:\Windows\Installer\1cca5bb.msi
!!!! C:\Windows\Installer\1cca5bb.msi DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy the missing file or manually
replace the problem file overwriting it is exist:
Copy "E:\D DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sqlsqm.msi" C:\Windows\Installer\1cca5bb.msi
Replace the existing file if prompted to do so.
Sql Server Customer Experience Improvement Program Patches Installed
No Patches Found
================================================================================
PRODUCT NAME : SQL Server 2008 R2 SP1 Full text search
================================================================================
Product Code: {F96E9800-1B92-44FA-8A30-CE1D56D77F10}
Version : 10.51.2500.0
Most Current Install Date: 20140118
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\0089E69F29B1AF44A803ECD1657DF701\SourceList
Package : sql_fulltext.msi
Install Source: \x86\setup\
LastUsedSource: n;1;E:\D_DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\
sql_fulltext.msi exists on the LastUsedSource path, no actions needed.
Installer Cache File: C:\Windows\Installer\47a921.msi
Package exists in the Installer cache, no actions needed.
Any missing packages will update automatically if needed assuming that
the LastUsedSource exists.
Should you get errors about C:\Windows\Installer\47a921.msi or E:\D_DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sql_fulltext.msi then you
may need to manually copy the file, if file exists replace the problem file,
Copy and paste the following command line into an administrative command prompt:
Copy "E:\D_DATA\sql dba\sql dba materia\sql dba2 softwaee\Software\x86\setup\sql_fulltext.msi" C:\Windows\Installer\47a921.msi
SQL Server 2008 R2 SP1 Full text search Patches Installed
Display Name: Service Pack 1 for SQL Server Database Services 2008 FullText (KB2528583)
KB Article URL: http://support.microsoft.com/?kbid=2528583
Install Date: 20140118
Uninstallable: 1
Patch Details:
HKEY_CLASSES_ROOT\Installer\Patches\45BA0AD8B5846BC488E8DD346D52F708
PackageName: sql_fulltext.msp
Patch LastUsedSource: n;1;d:\0859867ecacfd38bdc\x86\setup\
Installer Cache File Path: C:\Windows\Installer\1cca9cb.msp
Per SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Patches\45BA0AD8B5846BC488E8DD346D52F708\LocalPackage
!!!! C:\Windows\Installer\1cca9cb.msp package DOES NOT exist in the Installer cache. !!!!
Action needed, recreate or re-establish path to the directory:
d:\0859867ecacfd38bdc\x86\setup\ then rerun this script to update installer cache and results
The path on the line above must exist at the root location to resolve
this problem with your msi/msp file not being found or corrupted,
In some cases you may need to manually copy missing files or manually
replace the problem file,
Copy "d:\0859867ecacfd38bdc\x86\setup\sql_fulltext.msp" C:\Windows\Installer\1cca9cb.msp
Replace the existing file if prompted to do so.
Use the following URL to assist with downloading the patch:
http://support.microsoft.com/?kbid=2528583
-
Bell's next step was for me to connect to iTunes. I downloaded iTunes and can't figure out how to proceed from there. The basic info in the Apple site for "unlocking" only addresses a SIM card that doesn't work. My SIM card is correct. How do I go on from here? Thanks,
Bell should have given you instructions, but in case they did not here is what you do:
Put a Bell SIM in the phone. It does not have to be a currently active SIM, but it must have worked on Bell at some time in the past.
Connect the phone to your computer with the USB cable.
It should appear in iTunes. Click on its name.
Click the Backup button.
Click the Restore iPhone button. When prompted to restore the backup choose that option.
The phone will reload iOS. If your current iOS version is not 7.0.4 it will update to this first. If that happens when the update finishes click Restore iPhone again.
If the process succeeds you should see the message: "Congratulations. Your iPhone is unlocked". If you don't get this message wait a couple of days and repeat the whole process again.
Note: to unlock the phone you do not have to Restore as New. Restoring and reloading the backup will work also. -
What is the next step after ABAP ? Need resources for SAP structure
Hello,
I have learned ABAP and now it is time to use it to write SAP programs. But what is the next step?
From where can I get information about SAP tables to proceed?
I have 2 ABAP books but they only provide the syntax for ABAP. After learning that, I am finding trouble in knowing on which objects/tables to apply it on.
For example, I want to know that when I use the CV01n to create a file, what happens in terms of internal SAP tables?
If I select multiple files in the search result "CV04N" which table should I access to get these selected files?
Basically does anyone know where I can find such resources in order to understand how to proceed in developing SAP application ?
Regards.Hi HASSAN,
For Learning the Business part of ABAP, (That is what is missing for you i.e the tables and their relations), i would suggest you to take one module at a time.
Like MM(Material management) or SD(Sales and distribution) etc.
Refer this link to know the business part of the SAP:
MM:
http://help.sap.com/saphelp_47x200/helpdata/en/96/df293581dc1f79e10000009b38f889/frameset.htm
SD:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f33e545a11d1a7020000e829fd11/frameset.htm
Regards,
Ravi -
User-Decision COMPLETED buti next step not executed
Hi Gurus,
I have a very strange problem when approving user-decision tasks in my workflow using FM SAP_WAPI_DECISION_COMPLETE.
SOMETIMES, the user-decision step becomes COMPLETED but the result in the workflow logs (SWI1) is blank and does not continue to the next steps of my workflow. I've done my research and checked everything (commit = X, SWU3, Task is General, etc..) but i still have not found any solution yet.
FYI: this does not happen all the time, most of the time the workflow works fine.
Based on SWWWIHEAD, the user ADSUSER(from WebDynpro) is the creator and the last one who updated the workflow instance.
Here's part of my code for your reference: (RFC - called by WebDynpro)
CALL FUNCTION 'SWL_GET_PROCESS_STEPLIST'
EXPORTING
wf_id = wi_id
with_techdetails = space
with_expansion = space
with_errors = space
TABLES
wfm_steplog = lt_wfm_steplog
EXCEPTIONS
workflow_does_not_exist = 1
error_while_reading_wfm_log = 2
OTHERS = 3.
DELETE lt_wfm_steplog WHERE wi_type NE 'W'.
CLEAR: wa_wfm_steplog, li_lines.
DESCRIBE TABLE lt_wfm_steplog LINES li_lines.
READ TABLE lt_wfm_steplog INTO wa_wfm_steplog INDEX li_lines.
IF in_pdf_flag = 'Y'. "Continue
ly_decision_key = '0001'.
ELSE. "Cancel
ly_decision_key = '0002'.
ENDIF.
IF NOT ly_decision_key IS INITIAL .
CALL FUNCTION 'SAP_WAPI_DECISION_COMPLETE'
EXPORTING
WORKITEM_ID = wa_wfm_steplog-wi_id
LANGUAGE = SY-LANGU
USER = SY-UNAME
DECISION_KEY = ly_decision_key
DO_COMMIT = 'X'
IMPORTING
RETURN_CODE = l_subrc.
Thanks in advance.
Regards,
DexterHello Dexter,
Thanks for the reply.
I have tried running the BAPI through Automation Tools which we have. That is Process Runner.
With the help of this I was Approving the WorkFlow. But as i found the issue, so for trouble schooting this i had manually checked in SAP though SE37 t-code.
Below is the code of BAPI 'sap_wapi_decision_complete'
=====================================================================
FUNCTION sap_wapi_decision_complete.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(WORKITEM_ID) TYPE SWR_STRUCT-WORKITEMID
*" VALUE(LANGUAGE) LIKE SWR_STRUCT-WILANGUAGE DEFAULT SY-LANGU
*" VALUE(USER) TYPE SYUNAME DEFAULT SY-UNAME
*" VALUE(DECISION_KEY) TYPE SWR_DECIKEY
*" VALUE(DO_COMMIT) TYPE XFELD DEFAULT 'X'
*" EXPORTING
*" VALUE(RETURN_CODE) LIKE SY-SUBRC
*" VALUE(NEW_STATUS) TYPE SWW_WISTAT
*" TABLES
*" MESSAGE_LINES STRUCTURE SWR_MESSAG OPTIONAL
*" MESSAGE_STRUCT STRUCTURE SWR_MSTRUC OPTIONAL
DATA: lh_msg TYPE REF TO cl_swf_utl_wapi_message,
lv_excp TYPE REF TO cx_swf_ifs_exception,
funcname TYPE funcname VALUE 'SAP_WAPI_DECISION_COMPLETE',
lv_wi_handle TYPE REF TO if_swf_run_wim_internal,
ls_t100msg TYPE swf_t100ms,
lv_handle TYPE sytabix,
lh_wapi TYPE REF TO if_swf_utl_wapi_framework,
ls_swwwihead TYPE swwwihead,
l_nodetype TYPE swd_nodetp,
lt_alternatives TYPE swr_decialts OCCURS 0 WITH HEADER LINE.
DATA: lt_cont TYPE swr_cont OCCURS 0 WITH HEADER LINE.
DATA: lh_params TYPE REF TO if_swf_ifs_parameter_container.
DATA: lh_trc_data TYPE REF TO if_swf_cnt_container.
DATA: lt_message_lines TYPE sapi_msg_lines.
DATA: lt_message_struct TYPE sapi_msg_struc.
*- startup framework
lh_wapi = cl_swf_utl_wapi_framework=>create( im_language = language ).
lh_msg = lh_wapi->get_message_object( ).
lh_params = lh_wapi->get_parameter_container( ).
CALL METHOD lh_wapi->set_commit_control( im_commit = do_commit ).
TRY.
CALL METHOD lh_params->set
EXPORTING
name = lh_wapi->c_workitem_id
value = workitem_id.
CATCH cx_swf_cnt_container .
ENDTRY.
lv_handle = lh_wapi->register_function( im_function = funcname
im_parameters = lh_params ).
*~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
IF lh_wapi->m_trace_handle IS BOUND.
TRY.
lh_trc_data = lh_wapi->get_initial_trace_data( ).
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'WORKITEM_ID'
value = workitem_id.
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'LANGUAGE'
value = language.
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'USER'
value = user.
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'DECISION_KEY'
value = decision_key.
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'DO_COMMIT'
value = do_commit.
CALL METHOD lh_wapi->write_trace
EXPORTING
im_evt = swwtr_api_init
im_data = lh_trc_data.
CATCH cx_swf_ifs_exception. "#EC NO_HANDLER
ENDTRY.
ENDIF.
*~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
TRY.
*- function valid (allowed)
IF lv_handle LE 0.
lv_excp = lh_wapi->get_last_exception( ).
return_code = 900.
RAISE EXCEPTION lv_excp.
ENDIF.
*- get properties
CALL METHOD cl_swf_run_wim_factory=>find_by_wiid
EXPORTING
im_wiid = workitem_id
RECEIVING
re_instance = lv_wi_handle.
* is it a decision at all?
MOVE-CORRESPONDING lv_wi_handle->m_sww_wihead TO ls_swwwihead.
CALL METHOD cl_swf_run_workitem_compatible=>get_def_guid_structure
EXPORTING
im_header = ls_swwwihead
IMPORTING
ex_nodetype = l_nodetype.
IF l_nodetype <> swfco_wd_decision.
return_code = 2.
ls_t100msg-msgid = 'SWR'.
ls_t100msg-msgty = 'E'.
ls_t100msg-msgno = 205.
ls_t100msg-msgv1 = workitem_id.
RAISE EXCEPTION TYPE cx_swf_run_wim
EXPORTING t100_msg = ls_t100msg
wi_id = workitem_id.
ENDIF.
*- get texts
CALL FUNCTION 'SWU_GET_DECISION_TEXT_TITLE'
EXPORTING
language = language
wiid = workitem_id
TABLES
decision_text = lt_alternatives[]
EXCEPTIONS
node_not_found = 1
text_not_found = 2
workflow_not_found = 3
OTHERS = 4.
IF sy-subrc <> 0.
return_code = 2.
ls_t100msg-msgid = 'SWR'.
ls_t100msg-msgty = 'E'.
ls_t100msg-msgno = 206.
ls_t100msg-msgv1 = workitem_id.
RAISE EXCEPTION TYPE cx_swf_run_wim
EXPORTING t100_msg = ls_t100msg
wi_id = workitem_id.
ENDIF.
*- check alternative id
READ TABLE lt_alternatives WITH KEY altkey = decision_key.
IF sy-subrc <> 0.
return_code = 3.
ls_t100msg-msgid = 'SWR'.
ls_t100msg-msgty = 'E'.
ls_t100msg-msgno = 207.
ls_t100msg-msgv1 = workitem_id.
ls_t100msg-msgv2 = decision_key.
RAISE EXCEPTION TYPE cx_swf_run_wim
EXPORTING t100_msg = ls_t100msg
wi_id = workitem_id.
ENDIF.
CATCH cx_swf_ifs_exception INTO lv_excp.
IF return_code IS INITIAL.
return_code = 1.
ENDIF.
CALL METHOD lh_msg->set_exception_object( im_excp = lv_excp ).
*- set export
message_lines[] = lh_msg->get_message_lines( ).
message_struct[] = lh_msg->get_message_struct( ).
EXIT.
ENDTRY.
*- unregister to framework
CALL METHOD lh_wapi->unregister( lv_handle ).
*- complete decision item
lt_cont-element = swfco_wi_result_const.
lt_cont-value = decision_key.
APPEND lt_cont.
lt_cont-element = swfco_om_result_const.
lt_cont-value = decision_key.
APPEND lt_cont.
CALL FUNCTION 'SAP_WAPI_WORKITEM_COMPLETE'
EXPORTING
workitem_id = workitem_id
actual_agent = user
language = language
do_commit = do_commit
IMPORTING
return_code = return_code
new_status = new_status
TABLES
simple_container = lt_cont[]
message_lines = message_lines
message_struct = message_struct.
*~~ begin of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
IF lh_wapi->m_trace_handle IS BOUND.
TRY.
lh_trc_data = lh_wapi->get_initial_trace_data( ).
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'RETURN_CODE'
value = return_code.
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'NEW_STATUS'
value = new_status.
lt_message_lines = message_lines[].
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'MESSAGE_LINES'
value = lt_message_lines.
lt_message_struct = message_struct[].
CALL METHOD lh_trc_data->element_set
EXPORTING
name = 'MESSAGE_STRUCT'
value = lt_message_struct.
CALL METHOD lh_wapi->write_trace
EXPORTING
im_evt = swwtr_api_result
im_data = lh_trc_data.
CATCH cx_swf_ifs_exception. "#EC NO_HANDLER
ENDTRY.
ENDIF.
*~~ end of trace specific coding ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*
ENDFUNCTION.
========================================================================
When I pass all the data through Process Runner Program and check in SAP manually it look like below in SAP
Kindly check the above screen shot and Help me in this regard.
Thanks,
Srikanth -
What is the Next Step after MCSE
I need to know what is the Next Step after MCSE massaging ?
and what is the top certificate in MicrosoftHey Mohamed,
I agree with Danny, he explained perfectly.
MCSE Certification is the highest in servers, DB, etc. .. (except from Office where different certifications)
MASTER degree have now only for Microsoft Office.
See all qualifications for office following link
https://www.microsoft.com/learning/en-us/office-certification.aspx
Or details of the MASTER link
https://www.microsoft.com/learning/en-us/mos-master-certification.aspx
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
| -
What's the next step before making your site "live"
Hi,
I created a website and I wanted to get input on what my next step would be prior to uploading my website to the host server. It's all ready to go live I just figured there's probably some testing and validating I need to do on it to make sure everything is working as it should. So I wanted to know what are those next steps exactly? Are there any resources (ie: a website, etc.) out there on the web that can help me make this as painless as possible? I'm still fairly new to web design so the simpler the better.
Thanks!
ashmic19Check spelling and grammar.
Validate CSS & HTML code.
To ensure menus, links and widgets all work, fully test your site in the 5 major browsers. If you must support older IE, get IE Tester.
http://www.my-debugbar.com/wiki/IETester/HomePage
Use Firefox's web developer toolbar.
https://addons.mozilla.org/en-US/firefox/addon/web-developer/
Web Page Analyzer & Optimization report
http://www.websiteoptimization.com/services/analyze/
Set-up Google WebMaster Tools and Google Analytics.
http://www.google.com/webmasters/
http://www.google.com/analytics/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Guidance to ABAPer for Next step..
Hi all,
Am an BAPer with 3 years of experience worked on ALE,ALV,Smart forms,IDOC,BDC,Module pool.
Can anybody guide me what exactly out of above is required in CRM?
Please guide me what should be the next step for me in CRM? and why?
Thanks.Hi Sanu,
To begin with CRM,its better you try to understand the functionality available in CRM and how and where in business scenarios it would be used.
All the technical knowledge you mentioned above would also help in CRM,since CRM can inturn be connected to other SAP systems as well as legacy systems.So its an advantage for you that you know stuffs like IDOC,ALE etc.
BDocs are widely used by middle ware module of CRM for data exchange.
Best source for you would be help.sap.com,you can get basic overview of CRM to begin with.
If you have any specific concerns about CRM,plz let me know.
Hope this helps!
Best Regards,
Shanthala Kudva, -
I have EMS 3.5 installed and functioning. Need help with where to go next!
Hello All,
I am brand new to this and need a very basic push in the right direction.
I have FMS 3.5 installed on my server and I am ready to begin testing with it.
My website has a page with descriptions of videos and links to those videos.
When a link is selected, I want a new page to open and the video to play in the FMS player.
I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
I have Flash Professional CS4 and I just need to know what the heck to do next.
Any and all help will be supremely appreciated.
Sincerely,
wordmanGentlemen,
Thank you for the answers, I will definitely look into what you both suggested.
My next step is getting a player into a separate page that plays selected videos through RTMP.
The player that comes with FMS would be fine, but I do not know how to alter it, change colors, etc.
Then I was looking into Real Eyes' REOPS player, and the white papers alone stopped me in my tracks. I realize it's probably easy, but now ehrn you are a novice, to understand it.
Then I saw Adobe Strobe, the OSMF-based player and thought that might be good for me.
The biggest problem I see is that Adobe's resources are not always easy to find on this website, same goes fo rthe OSMF site. Not very well structured sites for a software company.
Bottom line is, I need to get a player on a page that plays though RTMP. Any thoughts there? I'm completely new to Flash.
Thank you all!!!
Sincerely,
wordman -
Next steps after install of solaris10
Hi as I,m new to solaris10 having only used windows i,m a little stuck. Having got solars up & running with help from the forums i need to move on. I would lke to run various programs eg word/ a image program etc, do any of these come with solaris package if so how do i find them / where are they? i know this is very basic stuff but is impossible if u dont know the next steps to take.
If there is a tutorial i am wiling to learnhi spiky001
Welcome to Solaris.
yes, mozilla is not installed on Solaris you have to download it from the web and then install it.
You can log on to or ftp to sun's site [www.sunfreeware.com] with username as anonymous and password as your valid email id.
You can download loads of stuff from there.
Edited by: hiteshthappa on Aug 15, 2009 4:17 PM
Maybe you are looking for
-
Desktop Bluetooth Windows 7 Not working
I have a BB 9000 that I have been trying to connect with desktop manager 6.0 by Bluetooth in Windows 7. Windows 7 pairs with the 9000 with no issue, but then the DT does not find the device. I have also removed the pairing with win 7 and had DT locat
-
I have the same problem w/ 2 different vcams
Okay peoples, I'm putting together an animation in Flash CS4, on a MacBook Pro running OS X 10.5.8, and I positively need to be able to use the vcam (of course!). But I can't make it work. Essentially, when I try to test or publish the movie w/ the
-
Imac Intel - Sleeping display (only imac screen )
I Get a Imac 2008 Alu , And I use it like a media center with a videoprojector ( videoprojector is the second screen) All works well , but As the Imac Screen is very very Bright , I want to Sleep the display of the Imac , but get the Second display O
-
I've got three monitors lined up and I'm looking for a way to instantly center the cursor on a specific display to avoid dragging it everywhere. I know there's a software called Multi Monitor Mouse for Windows which is supposed to handle that pretty
-
Startup failure after the mass updates install
Hello MacWorld:-) I really hoped I will never have to post anything here as long as I have Mac:-) and for almost a year nothing happened, everything worked smooth and easy. But several days ago I decided to install a number of updates, like about 10.