NO HELP FOR QUICKTIME SETTINGS

When I look into my settings, click on QuickTime and click on the "?" to get help from the help center, I only see a blank page. Is that normal or not?

Ditto...can't find an answer anywhere! I'm really getting fed up with this!

Similar Messages

Need QUICK! help for Quicktime Pro Install

I came in this morning knowing I'd be pressed for time, and that I needed to convert a WMA file to an MP3 for a meeting. I decided to use Quicktime Pro 7. I made the purchase and have been trying for a 45 minutes of precious time to get it installed but am running into one bit of crap instructions after another. First, the instructions say to go into my system preferences and click the Quicktime icon. There isn't one. Next it says to download Quicktime 7 and load Quicktime Pro as an upgrade to that. Downloaded QT7, installed and it went off into space somewhere. Not in my applications folder.
I'm running out of time. Why can't this just be an install process like any other normal program intead of making a person crazy?
Any help would be appreciated.
Runing OS 10.6.8 on a hugely capable system.
Cayce

Oh, I think I get it now. So Quicktime Pro 7 will never show up as Quicktimje Pro 7, as advertised, but will be cleverly hidden within Quicktime Player 7 so that after it is actually loaded, it will still be called Quicktime Player 7, and there will be no visually recognizeable evidence that the install was successful, unless you've experienced this before and know what to drill down & look for, which rarely is the case when a person purchases and installs a software for the first time.
Both the Registration and About windows will display the normal QT 7 icon with the "Pro" text embedded to indicate QT 7 is properly keyed for "Pro" use, as well as, "un-greying" the "Pro" specific options in various menu windows when content is loaded/a player window has been opened. As explained on various Apple web pages, purchasing the "Pro" key does not add any new codecs and does not download any new software. It only turns on the track/layer editing and conversion features for direct access from within QT 7 without having to purchase a full editing app like FCP. This is the way classic QT has worked for the last decade since I started using v5.
Thanks for the kind and thorough assist, though, Jon. I'll manage from here. Curious about the South Jersey Apple Users Group. I'm up at the northern border, in the lakes region, town called Ringwood.
The SJAUG primarily hosts membership throughout "South" Jersey (i.e., from Burlington County to Cape May County.) In the past, when membership was more active, we actually held meetings twice a month (Medford leas and Pine Hill School) to host a split membership. The Video SIG used to be quite active but between the split meetings, dwindling membership, aging membership (many have been members for 10-15 years and at 66, I am considered one of the younger members), and closing of the Pine Hill meeting venue (Pine Hill meeting members now usually go to the MUGSNJ at Gloucester County College), our membership and SIG activities have greatly been reduced over the last few years. In any case, we normally meet the third Saturday of each month at the Meford Leas facility just off Rt 70 in Medford. (http://www.sjaug.org)
I have not visited user groups farther north than the Princeton area. Would invite you down to the next meeting (26 Jan '13) but I'm sure there are closer groups if you are interested. Retired, my video/QT interests are promarily centered on the creating and maintaining of my own personal video library for iTunes/TV/Airvideo management/streaming of content.

I need help for quicktime 7.7.5. for Windows.

I tried to make one photo out of a MOV file. In the past earlier version and windows XP no problem. Export movie to photo and no problem. But now with Windows 7 and Quicktime 7.7.5 QT makes a PCT file as usual but converting this file to JPEG did not work.

Lion and Moutain Lion can record a smaller portion of your display using QuickTime 10.1 or 10.2.
If your machine supports the upgrades then you should combine QuickTime player Pro 7 and QuickTime 10.1 or 10.2.
If your machine can't be upgraded to Lion or Mountain Lion then you could use third party software:
http://mac.appstorm.net/roundups/utilities-roundups/10-screen-recording-tools-fo r-mac/

No help in QuickTime

The links in "QuickTime Player Help" no longer work. Is there anything I can do to get them working again? I have QuickTime Pro 7.6.6.
thanks,
Scott

I have the same problem on Leopard 10.5.8 with the help content of QuickTime Pro 7.6.4. The links of the main help page don't work and when I search something (for example "cut") I find a result but if I click on Show, nothing happens and if I click twice on the article title, I return to the main page.
I tried to repair the permissions, I re-installed Quicktime, I installed the combo 10.5.8, I deleted all the help, helpviewer, quicktime preferences (in the User Library and in the Main Library), I tried with a new user (same problem), I deleted the caches (according to an Apple support document for older systems). Not in that order...
The Mac help works normally.
On my Tiger the help for Quicktime (last version, free) works normally.
Is that a bug?
Message was edited by: Patrizia Franchini

Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

What are the existing settings iMovie?
Al

NEED HELP registering QuickTime 1 Pro for Windows

Let me start off by saying that I'm a total novice when it comes to computers & my new iPod. I have Windows XP and I believe I've downloaded Quick Time bla bla bla and have already purchased QT7Pro ($32.31). I have received my email confirmation along with my key. On the on-line instructions it says go to start,settings,control panel, quicktime control panel then register your key. When I click on start, there is no option for settings. There is an option for control panel (which has nothing in it remotely related to QuickTime) and there's an icon for QuickTime. When I click on that it just keeps asking me if I want to but QT 7Pro. I just spent $32.31!!!! I already have it.... help please (in layman's terms).

Open any QT document, such as the sample movie that came in the QT folder. The go to the Edit menu and choose Preferences/Registration. Click on Edit Registration and then enter the Name that is in the email from Apple and then the Key in the email. Click on OK and you should now be registered.

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

Help with FMLE Settings for Sports Broadcast

Hello,
I am in need of some help tweaking my settings in FMLE. I put on various sports broadcasts, but one of my clients has limited bandwidth (avg ~2.5-3mbps upload).
I'd like to keep the output pixel size at 640x360 so that it takes up our entire player and doesn't letter box it, but with the larger video size I sometimes run in to either buffering,or pixelated video depending on how the bandwidth is that particular day. I'd like to stream between 800k-1000k.
I am using VP6 codec and using an Osprey Card as my capture device.
Some of my questions are:
1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
I am able to drop by bitrate down to 600K and the stream does not buffer, but it starts to get pixelated. I would think that 3mbps upload bandwidth is enough to stream at 800k. Any help adjusting my settings to shapen the imagine would be greatly appreciated.
Thanks.

1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
--> Always capture at the same size, unless the device/card doesn't support that size.
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
--> Data rate window is useful for unexpected source data that might not encode well within the specified bit-rates. For example, if you set data rate window to "tiny" and a complex frame (source data) arrives, then encoder will not allocate some extra bits to encode that frame in good quality. But if you set the window to huge, then that complex frame will be encoded in good quality by allocating more bits to it. So, basically, the "delta" around the specified bit-rate increases on moving from "tiny" to "huge" data rate window. Your output bit-rate will vary more in case of "huge" setting.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
--> I can explain the difference between the 2 options and you can experiment with both and stick to one, which gives a better user experience under your bandwidth conditions.
a. Once the auto-adjust feature triggers, Drop frames option will intelligently drop some frames. As a result of this, you might observe video stalling depending upon the severity of the bandwidth conditions.
b. Once the auto-adjust feature triggers, Degrade quality option with a min. video bit-rate value of say 500 kbps will try to encode all the frames within this 500 kbps limit. As you are reducing the bit-rate from the original value of say 800 kbps, the quality is bound to degrade. If you check the "preserve per frame quality" option then the encoder will encode >=50% of the frames within the specified bit-rate of 500 kbps. As the no. of frames are less the per frame quality will be better than the previous case. There is a possiblity that even after degrading quality, the buffer is exceeding the given limit then the degrade quality option will automatically switch to the drop frames option.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
--> Deinterlace option is only available for video sizes >= 640x480.

Incorrect search help for Delivery address in SRM User Settings

Hi experts,
We use SRM 7.0. When i want to change Users Attribute Delivery address (in SRM User Settings) and call search help for this, than i get list with 3 identical addresses.
For example:
Value                          Label
111                         usa/Ny/1
111                         usa/Ny/1
111                         usa/Ny/1
222                         usa/Sf/2
222                         usa/Sf/2
222                         usa/Sf/2
333                         france/P/3
333                         france/P/3
333                         france/P/3
How can I delete undue entries?
Thanks a lot

Hi
Are all adreess numbers Unique ?
every ship to address has unique . can you check data base level ?
Muthu

Best Quicktime settings for Video Encoder?

This is to reiterate the issue originally posted under
this
topic.
Summary: CS3 encoded FLV (using Quicktime movie as source)
stops playing halfway through (likely related to the audio)...
Solution: Set audio of Quicktime movie to 44.100 kHz (not
22.050) sample rate before encoding to FLV.
Continued Issue: Is Adobe working on a fix to the Flash
Video Encoder so that all Quicktime settings are supported?
Question: Any recommendations for the "best" Quicktime
video/audio settings (codecs, frame rate, etc.) for FLV encoding to
optimize quality and minimize file size?

Voddie,
I'm definitely no expert; so if others have better info, I
hope they will post too. And the guidance below is from a Mac
perspective.
Using
Quicktime Pro, you can export each movie and adjust the
Options. Under the Quicktime Options (see this
screen
image
for the two settings windows that you will access), the Sound
Options is where you'll set the sample rate to 44.100 kHz, then
save the file(s).
If Quicktime Pro is not available, you might look into
ffmpegX
as an option (though I have not tried this myself).
Note: I read that for version MX, it was recommended that the
Quicktime sound be uncompressed, or encoded using ALaw 2:1 or ADPCM
codecs. I'm not sure if this is true for CS3. Again, I hope others
will chime in.
Patrick

Help,just entered registration code for quicktime pro,help needed

Help,just entered registration code for quicktime pro,help needed,cant seem to see the quicktime pro screen i saw on internet with all the edit and extra things at the top,i dont understand this,any help,Dave

I hope this helps http://support.apple.com/kb/ht2240 good tips on your prob here..good luck

Help with print settings for Panoramas

Hi,
I use an Epson 2880 and I am trying to figure out the print settings for doing an 11 x 34in panorama print on 13" roll paper from Aperture 3.0.3. I finally got it to do one print properly, but the setup was totally counter intuitive and I can't reproduce it. I tried using "Custom" Paper size and setting it to 13" x 36", then using the landscape mode and setting the Image Size to 11 x 34". Any way I did this ended up with the image printing the wrong way on the paper. So I went back and picked "Roll" paper. This leaves only one field to fill in, which I presume is the paper width (it really didn't make this obvious in the dialogue.). Then I set the mode to Portrait, and made sure that the settings for the Image size were 11 x 34. It then printed fine. But when I went back to print another file, even though I had saved the settings, now I am presented with only one box for specifying the Image Size and there is no way to get it right again. HELP! The settings for this kind of print in Photoshop is also counterintuitive, but when you get it set right, and you know the settings, no problem reproducing it. I think maybe there is a bug in AP3 with regard to this sort of setup.

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How do you get to the options for export settings with the new quicktime?

I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

How do you get to the options for export settings with the new quicktime?
You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

Sprite For Quicktime Help

Hello
I'm looking for someone to help us create sprites for quicktime. I know that you used to be able to do it in Go Live. Can you do this in Dreamweaver? Does it need to be done with CSS? I'm looking for someone to help us out with this. Drop me an email if you're interested in some freelance work.
Thanks
Peter
[email protected]

I suspect a Sprite has some meaning in GoLive, but this term doesn't exist in DW or QuickTime.
Perhaps you will get better answers in this forum if you tell us what a GoLive Sprite is and exactly what you expect to do with it in DW. There may be something comparable you could use that goes by another name.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Cannot change codec settings for Quicktime export?

I have Quicktime installed, and it shows up as an Export option in Premiere Pro. However the options are extremely limited. Under the Video tab, there is a button for "Codec Settings" but it is greyed out. You can't choose whether you want CBR or VBR. Under the Audio tab, there is also a "Codec Settings" tab, but it too is greyed out. I can't even change the bitrate settings for AAC audio. Actually, it doesn't even tell you what bitrate it's exporting at, let alone let you change it.
Does anyone know what the problem is?

Possibly.
Some codecs have settings and some don't. If you pick one off of the list that has settings, you will have more success at changing parameters.
First things first. Does your list of codecs look something like this? If so, select the appropriate codec for your needs and see if it has options. None of the Quicktime exports has the option of changing from CBR to VBR as far as I can tell and to be honest I don't know which is being used. You didn't say if you were on a Mac or a PC but if you are on a PC you might consider using an H.264 export instead.

NO HELP FOR QUICKTIME SETTINGS

Similar Messages

Maybe you are looking for