No Highspeed Internet possible via Airport Express?

Hi,
i am using a windows xp laptop and my router is connected to an airport express base station. I am accessing the internet through the Airport Express WLAN.
I have a broadband internet connection with 16MBIT down. When i connect via the WLAN i get 6MBIT down maximum. When i use a LAN cable to connect directly to my modem i get 16MBT.
How is this possible? How can i optimize the WLAN to get full speed?
I have the latest firmware and software for the airport express.
Thank!

I'm confused by your speeds listed though. I've
never heard of consumer broadband that's anywhere
close to 2MB/s. Mine tops out at under 1/2MB/s, and
at best I've seen companies offering maybe 50% faster
than that (for double the money or more).
Are you sure you're listing the correct speeds?
I suspect he is, remember he is in Germany where you can get even faster speeds up to 50Mbs
Germany preps 50 Mbit broadband
Deutsche Telekom, parent company of T-Mobile USA, announced that it will begin installing VDSL2 broadband across Germany and will have the technology available in ten metropolitan areas by the end of this year. VDSL2 will offer download speeds of up to 50 Mb/s and uploads of up to 10 Mb/s. Deutsche Telekom said that the network will deliver about 100 free and premium TV channels to customers.

Similar Messages

Intermittent internet connection via airport express

I've got a MacBook Core Duo and a MacBook Pro Core 2 Duo...both with airport express. My internet connection is via a DLink DI-624 to Motorola cable modem. The DI-624 is setup with WPA security...which has been working fine for my windows laptop and PDA.
I've been getting random problems with web surfing even though the airport express icon shows full bars. During those problem times, safari reports no internet connection.
I've noticed that I can sometimes bring internet connection back by turning off the airport (via the icon at the top) and then turning it back on. Don't like this, as wireless connection should just work...and this doesn't always fix it.
Suggestions?
Thank you.
MacBook Core Duo and MacBook Core 2 Duo Mac OS X (10.4.8)

raxx wrote:
I am currently using the 802.11n Airport Express (firmware 7.4.2) as a wireless router to serve 2 802.11g Windows PCs. However, our internet connection seems to have slowed significantly recently.
When I connect directly via a LAN cable, my download speed is 25+ mbps. However, the download speed slows to only 6-7 mbps when connected wirelessly via the Airport Express. The speed remains this slow even when only one computer is connected wirelessly.
In general an Ethernet connection will be faster than a Wi-Fi connection.
In AirPort Utility for Mac (which ought to be similar for the same program for Windows) you can enter "manual setup" mode, then select the "Advanced" panel, click the "Logs and Statistics" button, then click the "Wireless Clients" tab. If you can do that, what values do you see in the lower part of the window for "SIgnal" and "Noise"?

Internet shared via Airport Express - Speed control

Good morning all,
I am using an AirPort Express base station to share my internet connection between two computers. I have a cable modem connected to the AirPort Express, and both my iMac and my brother's PC connect wirelessly to the AirPort Express base station.
Now the problem is that the PC is using extensively the bandwidth, whereas the Mac cannot hardly browse the web. As I do not need a fast connection to the Mac all the time, but only in specific occasions, I would like to be able to control how much of the internet bandwith is used by each of the computers connected to the Airport Express base station.
I have checked the manual setup in the AirPort utility, but I cannot find this setting.
Does this exist? Can it be done?
(I know I can ban a specific computer from connecting to the network, but this is not what I want).
Thank you in advance for your help and assistance.

This feature is NOT available on any of Apple's base stations.

Internet speed slows down when connected via airport express

Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?

Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup.

Unable to access internet via Airport Express

Hi. I'm have trouble connecting to the internet using my Airport Express.
When I plug in my DSL modem to the unit, I get the solid green light. My Macbook is able to connect to the airport, and to other computers on the same Airport.
However, none of my computers are able to reach any internet sites. They were even unable to directly ping a remote IP address. However, if I plug my DSL modem directly into my Macbook, bypassing the Airport, it correctly connects to the internet, which leads me to believe the problem is with my Airport.
A couple of oddities which I don't know if they are normal. First, in my MacBook's network prefs, the DNS box is blank. However, I'm connected via DHCP, so I didn't know if that'd matter. In the airport configuration app, under internet, it's also using DHCP, but the box is empty, with the same address as the router (192.168.1.1) greyed out next to it. The IP address is 192.168.1.5. This number is rather different than when I connect to my DSL router directly on my MacBook.
I'm running what I believe to be the newest firmware (6.3).
Any ideas anyone?
Thanks,
Nathaniel

Hi,
I solved the problem using the airport express firmware 6.1.1. and erasing all favourites networks in network pref panel to create new ones. You may also check the keychains utility (applications -> utilities). If there is several times the same pass, just keep the latest and erase the others.
Hope my english is understandable...

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

OS X Leopard and internet connection via Airport

Help! I upgraded to OS X Leopard over the weekend and now I can't connect to the internet. I am using a cable model via Airport express. I'm picking up the airport connection & network but still can't get onto the internet (I get a "server unavailable" message). I upgraded both my desktop and laptop. The laptop is working intermittently, but the desktop only rarely. I have a PC laptop that is still able to connect without a problem. I've tried unplug/replugging the Airport; manually entering the ISP address; and installing the "login and keychain update" download but nothing is working. Any suggestions? Thanks!

Do you have Internet Sharing enabled (in the Sharing Preferences) on the Leopard Mac? These things have changed somewhat in Leopard from Tiger.

Can we print with a non-wifi printer via Airport Express?

Is it possible to print with non-wifi printer via Airport Express?

Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

Wireless Speakers via Airport Express

I have two sets of powered speakers which I play my music from iTunes via Airport Express units. My issue is after months of excellent sound and no problems, it appears I am now losing connection to the speakers which means the music stops and starts, VERY frustrating....! The internet connection via the Airport Express units is not a problem, just the music.
Has anyone had similar problems and is there an answer...??????

Check out this article:
http://www.macfixit.com/article.php?story=20070322005336248
I don't know if it's good or anything, but it looks like the info you want.

Connect Imac to Stereo via Headphone Jack & 2nd Stereo via Airport Express

I have two whole-house stereo systems; one serving the lower level (basement) of my house and another serving the first and second floors. My iMac is on the lower level. The house was prewired with two coax cables (standard cable TV-type cables) from the area behind my stereo on the lower level to the room where my iMac is located. Using adapters from Radio Shack, I was able to directly connect my iMac to my home stereo on the lower level. I can currently play my iTunes on my lower level stereo by plugging the cable into the headphone jack on my iMac.
I am set up with a wireless network using a Linksys WRT54G. I would like to be able to also stream music from iTunes on my iMac to my home stereo on the first floor. I realize I can do this with the use of Airport Express.
My goal is to be able to play the same music from iTunes on my iMac on both stereos simultaneously. My question is; if I have my lower level stereo connected to my iMac via the headphone jack, will I still be able to stream the same music from iTunes to my upper level stereo via Airport Express? I'm concerned that by connecting the lower level stereo to the headphone jack, the music will not be able to be streamed wirelessly to the upper level stereo.
Thank you in advance for your time.
iMac 24 in. Mac OS X (10.4.8) Wireless keyboard & mouse, Linksys WRT-54G connected wirelessly

Hi.
Assuming your iMac is no more than 50 feet from where you intend to locate the express then:
You will need to configure your airport express to join your current wireless network in client mode (otherwise you won't be able to use the internet and the express at the same time).
http://docs.info.apple.com/article.html?artnum=302153
In iTunes there is an option to select multiple speakers. Thus you select this and then check the desired options. Hence you can have music coming out of the speakers/hadphone jack on your iMac AND out of the speakers connected to the airport express.

Trouble printing to Epson Workforce 435 via airport express network

We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express. After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well. Our Macbook air works just fine. The printer's network status sheet says it is connected, but it's like our computer can't find it on the network. Can't ping the printer's IP address either.

Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
Here is additional information about how the AX is currently configured:
In the Airport tab in AirPort Utility:
Wireless Mode: Create a wireless network
Radio Mode: 802.11b (802.11b/g compatible)
Channel: 1
Wireless security: WEP
MAC Address Access Control: Not Enabled
In the Internet tab in Airport Utility:
Connect using: Ethernet
Configure IPv4: Using DHCP
Ethernet WAN port: Automatic
Connection sharing: Off (Bridge mode)
I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
Thanks!

PBG4 tries to connect via airport express, but I want it to use ethernet!

Hey y'all, and thanks in advance for your help!
I use airport express to connect itunes to my stereo, and for nothing else. My computer, however, keeps trying to connect to the internet through the airport express, and I end up having to turn the airport off until I'm on a website, then turn airport back on.
How do I tell my computer to NEVER attempt to connect to the internet via airport, and to ONLY use ethernet to connect???
Thanks again!

Click here and follow the instructions.
(41434)

G5 & PC NOT STAYING CONNECTED VIA AIRPORT EXPRESS!

I've got a G5 and a PC - Hoped that Airport Express would allow both to access internet (via cable modem).
The connection drops after a little while. Everything says its working but obviously it's not.
ANY HELP??!!!
Thx!

reinis wrote:
I have white Macbook (802.11g capable) and Airport Express (802.11g capable).
I have a LAN internet connection, which is pretty fast. When I connect the cable to my ethernet and try to download something (for instance, speedtest.net) then the download speed is 33Mbit/sec, and upload is 20Mbit/sec.
I also have an Airport Express router - the 802.11g to be specific. So in the Airport Utility, under Wireless I selected "802.11g ONLY" and selected 24Mbit/sec Multicast rate.
When I tried to download something when conected to my Airport Express router - what actually happened, is that my computer is 2 m away from the Airport Express and the max download speed approximately should be ~24 Mbit/sec, but it turns out that the down speed is ONLY 14 Mbit/sec and the upload speed is 11 Mbit/sec.
So it means, that the Airport Express actually cannot deliver the 24 Mbit/speed.
I am actually pretty dissapointed, because I was kind of okay with the fact that I will loose those ~10 Mbit/sec from my actual internet sped when connected via Airport express, but I did not expect that it would be halved.
Any solutions?
According to one source, the maximum throughput of 802.11g is 25 Mbps. That assumes ideal conditions. To learn more about those conditions in your case, launch AirPort Utility, double-click on your AirPort station to enter "Manual Setup" mode, select the "Advanced" panel, click on the "Logs and Statistics" button, then click on the "Wireless Clients" tab. There you will see values for signal and noise. The closer those two numbers are together, the worse throughput you can expect.
If the value for noise is high, you might try setting your AirPort unit to a different channel.
All the above is based on your having no other Wi-Fi equipment.

Connecting via AirPort Express: Performance Help Needed.

Hello,
I'm grateful for ideas, instruction, pointers to threads I may have missed re: improving performance/determining the cause of poor performance when connecting via AirPort Express.
The deal: Up to 6 devices are connected to our AirPort Express. Only three of these are ever used simultaneously, though all remain "on," in either sleep or hybernate mode. Performance across the network is terribly uneven. Current data rate stats (a snapshot by way of the AirPort utility, in order of distance from the router):
iMac: 130 Mb/s
Printer: 54 Mb/s
Macbook Pro: 144 Mb/s
iPhone: currently "off"
PC (Connected via Belkin USB-type Wireless Adapter): 2 Mb/s
iPad: 39 Mb/s
Note: the Macbook Pro is often located in a room farthest from the hub, some 120 feet away and with partial direct line of site. Still, its performance is unimpeded.
At first glance, logic would dictate the worst problem is on the PC and caused by the Belkin adapter. But I've swaped that out for different USB solutions. Performace is seldom improved.
Wondering if:
a) The PC problem is in the data transfer rate of the PC bus. (Foregive me if I'm using "bus" incorrectly here. I'm guessing you'll know what I mean.) Or is it the nature of the USB adapters?
b) Please also note that the Printer, which sits close to the router, often has a drop in data rate, sometimes to the single digits.
Again, I'm grateful for ideas, instruction, or pointers. Also for wisdom on "extending" the network, perhaps by adding another AirPort device. I'm rather clueless about such stuff.
Thanks in advance- Best for the weekend-

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

No Highspeed Internet possible via Airport Express?

Similar Messages

Maybe you are looking for