No HW ID received by mssg server

Hello
When I attempt to login to my Mini SAP Web AS version 6.2 I am receiving this error "No HW ID received by mssg server" What can I do?
I have just check System file and I have just cancelled port 3600 but I have ever the same problem.
Sorry for my English
Help me!!

I had this problem.  I noticed in my SAPMMC (Console) my process list was status yellow also.
A change I made was in "start>settings>network connections"
My "Microsoft Loopback adapter" was enabled but not connected.
Steps I took and it now works are:
- rebooted
- Added the "Microsoft Loopback adapter" to the bridge by right clicking on the adapter and choosing "Add to bridge"
- started application server through menupath
- looked at console and lights were green
- started up the gui and i am able to log-in.
Hope it helps.

Similar Messages

  • No logon possible (no hw ID received by mssg server)

    We have restored a copy of our production R/3 system onto another LPAR. I've done the homogenous copy of that system and have done all the post upgrade steps. I was working on it all day yesterday with no problems.
    Today, when I stopped/started the system, when I try and login I get the error "No logon possible (no hw ID received by mssg server)"
    When looking in the dev_ms log, there really isn't anything out of the oridinary. Looking in the dev_disp log, there are a bunch of logs that say: *** ERROR => MsISnd2: not_attached [msxxi.c 1334]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4297]
    Anyone seen this error before? Any help would be greatly appreciated. I do have a OSS message open as well.
    Thanks,
    Dale Dingmann

    Hi Dale,
    this is a quite normal thing after homo copies that are carried out slightly wrong.
    The host names in the profiles, cfgtcp option 10 & 12 and the service sapmsSID need fully to match. If one of these is wrong, the dispatcher is not able to find the message server ... (upper & lowercase is of interest as well)
    Regards
    Volker Gueldenpfennig, consolut international ag
    http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

  • SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN

    Hello All,
    I work on PI 7.1 and needed to create an interface using a simple File-to-File scenario. I created this without using any IR/ESR Objects as per a technical article on the website saptechnical dot com /Tutorials/XI/File2File/Demo1.htm
    This worked perfectly fine in my dev environment. However, when I moved it to Test environment, I am having issues. Error message shown in RWB for Adapter engine is
    SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_ECC100, http://abc, ecc-to-external; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_ECC100, interface namespace http://abc interface ecc-to-external  No sender agreement found for , , , , , 
    Error Transmitting the message to endpoint http://piq.uk.rweutil.net/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during Sender Agreement Determination.
    I checked the Sender agreement. It seems fine. All other components are also active, however I do not see the sender agreement  in SXI_CACHE transaction. Any clues what could be wrong ?
    Many thanks in advance .
    Regards
    Rajiv

    Hi Rajiv,
    Please perform below tasks
    1. Logon Integration Directory
    2. Click on 'Modification' icon, put a 'dummy' change (may a space) in the description field
    3. Save the change
    4. Active the changed objects
    5. Repeat 2, 3, 4 steps for all those objects you moved to Test environment.
    All the above steps, eventually leads to have forceble cache refresh, if this won't helps resolve, Please perform full CPACache refresh using below URl
    http://<host name>:<http port>/CPACache/refresh?mode=full
    I presume these instructions will help to resolve the issue.
    Regards
    Sekhar

  • CLI0615E  Error receiving from socket, server is not responding.

    We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
    connection pool and running on iPlanet.
    We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
    I read something about "stale connections". Does anyone know how to check to see if this is a problem?
    When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
    The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
    Any suggestions would be greatly appreciated.
    Thanks.
    [29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
         at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
         at bom.Bom.getDefs(Bom.java(Compiled Code))
         at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
         at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)

    hi,
    lemme try to tell u what i thinkk..i dont think its' a solution
    Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
    But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
    contact them and they may provide and explanation..
    wishes,
    Jer

  • SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

    SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
    on IE to go to the previous page. Then it catch the error as:
    Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
    Details: Error parsing near '
    <!DOCTYPE html PUB'.
    I am using SQL2012 and Sharpoint2013.

    Hi Alisa,
    Thanks for your reply, I changed the web.config, but the issue did not resolved. 
    I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
    This issue can not reproduce on Chrome only occur on IE.
    So, do you have some details suggestion for me to fix it?
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <configuration>
    <configSections>
    <sectionGroup name="SharePoint">
    </sectionGroup>
    <location path="_layouts/15/TA_AppMonitoringDetails.aspx">
    <appSettings>
    <add key="ChartImageHandler" value="storage=memory;timeout=20" />
    </appSettings>
    </location>
    <location path="_layouts/15/ReportServer/RSViewerPage.aspx">
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    </appSettings>
    </location>
    <system.net>
    <defaultProxy />
    </system.net>
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    <add key="aspnet:RestrictXmlControls" value="true" />
    <add key="FeedCacheTime" value="300" />
    <add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
    <add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
    <add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    </appSettings>

  • Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000] String data, right truncation [SQLSTATE 01004] [SQLSTATE 08S01] error

    I'm looking for some general guidance on this complete error:
    Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000]
    String data, right truncation [SQLSTATE 01004]
    Msg 16389, Sev 16, State 1: The connection is no longer usable because the server response for a previously executed statement was incorrectly formatted. [SQLSTATE 08S01]
    This error is caused by a SQL Agent Job, but it does not always occur. I understand this could be an issue with SQL dropping the connection, but what is the best way to troubleshoot this?
    Thanks,
    Phil

    Hi philliptackett77,
    It would be more helpful for troubleshooting the issue if you post the SQL Server error log and SQL Server version. Additionally, please state what purpose of using the agent job.
    Based on my research, [SQLSTATE 08S01] error means communication link failure. If the executed statement returns invalid value in the job, the connection between server and client will fail. This error could be caused by the error of [SQLSTATE HY000] and
    [SQLSTATE 01004]. I’d like to share my knowledge about these errors as below.
    Quote: String data, right truncation [SQLSTATE 01004]
    This error could occur when passing data whose length is larger than the received object,and the passed value is truncated, and returns invalid value. So please check if the data type of the objects are identical and the length of passed value is not larger
    than the received object.
    Quote: Msg 0, Sev 0, State 1: Unknown token received from SQL Server [SQLSTATE HY000]
    The error could occur in the two cases below.
    1. If you use SQL Server version 6.50, and execute the cursor in the job step, set the statement options to use a server-side cursor and prepare a select statement on a SQL Server system table. The first execution of the select creates the cursor successfully.
    After you close this cursor, if you execute the prepared statement again, the error could occur.
    I recommend you to apply the latest service pack firstly. If the error still occurs, you could change your code by using a forward-only cursor instead of a static, keyset, or dynamic cursor on the system tables. If a forward-only cursor is unacceptable,
    prepare the select statement again on the system table and execute it to create a server-side cursor. For more information about the process, please refer to the article:
    http://support.microsoft.com/kb/151693/en-us
    2. The TDS stream from the server is invalid when transfer data between a database server and a client. This error is typically caused by a problem on the server. For more information about errors above, please refer to the article:
    http://technet.microsoft.com/en-us/library/aa937531(v=sql.80).aspx
    Regards,
    Michelle Li

  • SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR

    Hi Experts,
    we are testing file to RFC scenario. file adapter picked the file but not moving to Integration engine.we are getting below error someone can help us to resolve the issue. already we tested same one in development there it was works fine. but we are facing this problem in Quality.
    we have done below checks also..
    1. cache refresh (ESR, ID, Delta and full cache)
    2.tested configurations in ID its working fine.
    3. checked SXMB_ADM and and pipeline url and business systems in SLD. everything is fine.
    4. when i checked in messaging system there i find something error like.
    Transmitting the message to endpoint http://...sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during Sender Agreement Determination
    SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BC_xxxx, http://xxx//xxxx,; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BC_xxxx, interface namespace http://xxx//xx, interface xxxx
    No sender agreement found for , , , ,
    can someone help us....
    Regards,
    vengal.

    Hi Vengal,
    The error is only in one FTP scenario or all FTP scenario? Please check the below discussion
    SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN
    regards,
    Harish

  • How to trigger an event web service when a mail received in Exchange Server ?

    Hi,
    I have a requirement of Triggering the event in Web-service with related data (Mail Details) whenever mail received in Exchange Server..
    I have done R&D on this, but I couldn't find answer.
    Is there any possibility of triggering the service ? If Yes, how can I achieve this?
    Thanks in Advance.

    Hi Jason,
    Using above link, I am getting notifications only for the logged in user
    service.Credentials = new NetworkCredential(EmailAddress,Password,domain);
    I want a way to get the notification or callback when a email comes from any user to the server. I tried as above , but i could get the notifications for a logged in user with his credentials.
    Please help me to find out a way to get the notifications from the server irrespective of the user login.

  • The Data Received from the server running AD RMS didn't match the expected format.contact your system administrator for further investigation.

    Hi All,
       We Have implemented AD RMS in our organisation recently.But the Problem we are facing here many users those are Ms office 2013 we will get the error"The Data Received from the server running AD RMS didn't match the expected format.contact
    your system administrator for further investigation." and those who are in Ms office 2010 Professional it says  
        "The service is Temporally unavailable.Ensure the you have   connectivity to this server.This error could be caused if you are working offline.Proxy setting are preventing your connection or intermittent network issue."
      Below are the workaround did,
    1.Able to reach to Our pipeline ADRMS cluster.
    2.We have a valid Certificate.
    3.if we type https://adrms.ourdomain.com its working fine.
    4.Manually put the registry setting for effected computers.
    5. Applied the Hotfixes:MicrosoftFixit50903,KB2627273.
       Kindly help or suggest us to resolve the above issue as many computers in domain are not working with IRM.
    Thanks and reqard,
    Mohammed Siddiq.

    Hi Mohammed,
    Were you able to fix the issue with CRL disablement?
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • Exchange 2010 Initialization failed (Initialization failed) The WinRM client received an HTTP server error status (502)

    i have Server 2008 r2
    exchange 2010 evrything was working fine but now when i try to open the Exchange management console i get this errore
    the follwing error ocurred when serching for on premises exchange server
    Connecting to remote server failed with the following error message:
    The WinRM client received an HTTP server error status 502,  from the remote ws-managment servic   For more information, see the about_Remote_Troubleshooting Help topic. It was running the command
    'Discover-ExchangeServer -UseWIA $true -SuppressError $true'.
    please help
    Mahmoud Hanefy

    Anything in the event logs?
    Any help from:
    http://msexchangeteam.com/archive/2010/02/04/453946.aspx
    Troubleshooting Exchange 2010 Management Tools startup issues

  • Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500

    Good morning,
    I have major problems with exchange 2010 this morning.
    First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
    I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:
    Initialization failed
    The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';
    The attempt to connect to
    http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any
    other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
    I followed the steps listed here:
    http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
    but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.
    Any help would be much appreciated.
    Best regards
    Katrina

    Hi,
    I had the same problem, and I spent a weekend looking a solution, fortunally, I have it:
    Please follow this steps:
    Install WinRM IIS Extension, adding this feature from Server Manager.
    Change  IPv4 over IPv6 lookup preference, because the FQDN fails to find the server on TCP/IPv6. 
    To verify this, on Command Prompt please make this test: ping yourserver.yourdomain.domain. 
    Maybe you obtain TCP/IPV6 address response.
    Probably the Internet Information Services (IIS) Manager dont have the binding for IPv6, only for IPv4.
    To change IPv4 over IPv6 lookup group prefence, follow this steps:
    Please open regedit, locate the skubkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
    On DisabledComponents subkey, double click, change de value for
    0x20 (or 4120 Hexadecimal). this value make  the Windows OS to prefer IPv4 over IPv6.
    Repeat the test, on command prompt:
    ipconfig /flushdns (Enter) to flush DNS cache.
    ping yourserver.yourdomain.domain.
    At this moment you obtain TCP/IPv4 address response.
    To check Exchange Managment Console operation, you must restart the server.
    Please restart the server.
              Best Regards,

  • The WinRM client received an HTTP server error status (500)

    Hi All,
    I have installed the Exchange 2010 Management Tools and a few roles on our DC (Windows Server 2008 R2) but i cannot even connect to it to configure anything.
    If i use the management tools GUI i get an error message saying:
    "Connecting to remote server failied with the following error message: The WinRM client received an HTTP server error status (500), but the remove service did not include any other informaition about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true'."
    Using the Exchange Management Shell is get a similar error:
    "Connecting to remote server failied with the following error message: The WinRM client received an HTTP server error status (500), but the remove service did not include any other informaition about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
    + FullyQualifiedErrorId: PSSessionOpenFailed"
    This comes up 3 times and then said it failed to connect and to enter the Server FQDN i want to connect to.
    I have seen other posts where they have said to disable anonymous access for PowerShell in IIS which i have done and to also run the set-user yourusername -remotepowershellenabled:$true which i cannot run because i cannot even connect into it via PowerShell.
    Tried to see if there was a way to reinstall the management tools because i have a feeling they didnt install properly but cant find a way to do that.
    Tried to uninstall everything but i cannot because it says there are already mailboxes created (presume some default ones) but i cannot connect to remove them to uninstall.
    I seem to have reached a wall and cannot see how to proceed.
    Please help. Thanks.

    Have you tried loading EMS via Admin Tools > Windows Powershell Modules? Amazingly, that will probably work fine for you.
    Assuming that loads, or that you can run EMS on another machine:
    Check Powershell directory in IIS on the problem server. Make sure SSL is not required. Allow only Anonymous access - no basic/IWA auth etc.
    If you can get into Windows Powershell Modules, run the set-user command suggested above from there.
    Remove-powershellvirtualdirectory, and then New-powershellvirtualdirectory (either remotely or using Windows Powershell Modules.
    Re-check SSL/authentication once this is done.
    -Max
    Hi Max,
    Tried loading EMS via Admin Tools > Windows Powershell Modules but didnt work. Got the following error:
    Import-Module : There were errors in loading the format data file:
    Microsoft.Exchange.Management.PowerShell.Setup, C:\Program Files\Microsoft\Exchange Server\V14\bin\Exchange.format.ps1x
    ml : File skipped because it was already present from "Microsoft.Exchange.Management.PowerShell.E2010".
    At line:24 char:34
    +                     Import-Module <<<<  $_.Name -ErrorAction SilentlyContinue
        + CategoryInfo          : InvalidOperation: (:) [Import-Module], RuntimeException
        + FullyQualifiedErrorId : FormatXmlUpateException,Microsoft.PowerShell.Commands.ImportModuleCommand
    I think it is a problem with the PowerShell IIS VirtualDirectory because when i browse any other virtual directory i get a response of some sort but when i browse the PowerShell virtual directory i get the same 500 error message.
    This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
    Now i think i have made things worse. I was looking at the remove and new point you made an accidently deleted the whole PowerShell virtual directory in IIS using the IIS GUI. I didnt use the Remove-powershellvirtualdirectory command. Now i dont know how to get it back :(
    When i try to run New-powershellvirtualdirectory and specify to call it PowerShell it says it is already
    New-PowerShellVirtualDirectory : The virtual directory 'PowerShell' already exists under 'DC01.mainserver/Default Web S
    ite'.
    Parameter name: VirtualDirectoryName
    At line:1 char:31
    + New-PowerShellVirtualDirectory <<<<
        + CategoryInfo          : InvalidArgument: (DC01\PowerShell (Default Web Site):ADObjectId) [New-PowerShellVirtualD
       irectory], ArgumentException
        + FullyQualifiedErrorId : 7833EE63,Microsoft.Exchange.Management.SystemConfigurationTasks.NewPowerShellVirtualDire
       ctory
    I have tried to use the remove command but it doesnt find it no matter what i put in the identify parameter. It should be "Default Web Site" right?
    Anyways, i have created a new PowerShell virtual directory called ExchPowerShell (still would like to find a way have it called PowerShell) and removed SSL and enabled only Anonymous access. Now get a different error message:
    VERBOSE: Connecting to DC01.mainserver
    [dc01.mainserver] Connecting to remote server failed with the following error message : The WinRM client sent a request
     to an HTTP server and got a response saying the requested HTTP URL was not available. This is usually returned by a HT
    TP server that does not support the WS-Management protocol. For more information, see the about_Remote_Troubleshooting
    Help topic.
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
       eption
        + FullyQualifiedErrorId : PSSessionOpenFailed
    Did a search and i think this is because i now had a different PowerShell virtual directory so if i try to connect and specify the new virtual directory name i get the same error i was getting.
    Failed to connect to any Exchange Server in the current site.
    Please enter the Server FQDN where you want to connect: DC01.mainserver/ExchPowerShell
    VERBOSE: Connecting to DC01.mainserver/ExchPowerShell
    [dc01.mainserver] Connecting to remote server failed with the following error message : The WinRM client received an HT
    TP server error status (500), but the remote service did not include any other information about the cause of the failu
    re. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
       eption
        + FullyQualifiedErrorId : PSSessionOpenFailed
    Thank for all you help so far.

  • HT1937 Hello ! How i get activate my sim phone ? I have iphone 4s and I've received a message : "server unavailable. Please contact apple support." I've tried with iTunes, but ididn't work. Please help me.

    Hello ! How i get activate my sim phone ? I have iphone 4s and I've received a message : "server unavailable. Please contact apple support." I've tried with iTunes, but ididn't work. Please help me.

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and tis now relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743 
    If your iPhone has not been jailbroken, see the troubleshooting suggestions here:http://support.apple.com/kb/TS3424?viewlocale=en_US

  • Intermittenly receiving an Internal Server Error from Web Services

    When attempting to login to Siebel CRM using the SSO Token (i.e. https://secure-ausomxpod.crmondemand.com/Services/Integration?command=ssologin&odSsoToken=[TOKEN]), I am intermittenly receiving an Internal Server Error. This seems to be completely random and occurs even before the SSO token expires.
    The error code I am getting back is SBL-ODU-01006
    If there is any other information I can provide, please let me know.
    Thank you,
    Cameron

    Hi !
    Is it happening on the production environnment or only on your staging ?
    It may be link on how you get the sso token. Do you make any changes on the "JSESSIONID=azojdazpdazpdnazpdnazpdn" ?
    Just try to search the error code SBL-ODU-01006 in the forum and there're two thread about it.
    Hope this will help, feel free to ask more !
    Max

  • OfficialFile.asmx The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'. ERROR

    We are getting an error on the authentication piece when trying to submit a file to the OfficialFile.asmx web service to submit a document to the Drop-Off Library. Here is the code snippet -
    public string FileUpload(HttpPostedFile FileInput, RecordsRepositoryProperty[] properties)
    string strFileUrl = string.Empty;
    RecordsRepositorySoapClient repository = new RecordsRepositorySoapClient();
    BinaryReader b = new BinaryReader(FileInput.InputStream);
    byte[] binData = b.ReadBytes(FileInput.ContentLength);
    repository.ClientCredentials.Windows.ClientCredential = new System.Net.NetworkCredential(iUserID, iUserPassword, iUserDomain);
    repository.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
    repository.SubmitFile(binData, properties, null, FileInput.FileName, HttpContext.Current.User.Identity.Name);
    strFileUrl = repository.GetFinalRoutingDestinationFolderUrl(properties, null, FileInput.FileName).Url;
    return strFileUrl;
    Although we are setting the network credential in the client call we still get the error
    - The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'.
    Ideas?
    Thanks in advance.

    Hi,
    Based on the error message, the issue is related to the authentication type.
    I suggest you can specify the credential type like the below:
    CredentialCache credentialCache = new CredentialCache();
    NetworkCredential credentials = new NetworkCredential(UserName, PassWord, sDomain);
    credentialCache.Add(new Uri(recordCenterUrl), "NTLM", credentials);
    Here is a detailed code demo for your reference:
    http://blogs.msdn.com/b/mcsnoiwb/archive/2011/06/06/sending-files-to-a-record-center-using-the-sp2010-webservice-officialfile-asmx.aspx
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

Maybe you are looking for