No IDocs could be sent to BI using RFC.

We are experiencing this error while loading data from R/3 to BI 7.0. The exact problem is that these Idocs eventually get transferred to BI but at a very very slow rate:
For a job that takes 10secs to load, you can have it running for 4hours.
How can we resolve fast pls?
Note there have been steps taken by our basis team all to no avail.
SM58 on BI doesnt throw up any hanging Idocs
=============================================
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
============================================
regards,
Nneka

Hi
I think that you should perform with your basis some checks in your R3 environment.
First go to we20 / we21 and check if you have the RS* message configured in the LSR3SID system.
Also ask to your technical team if they saw some RFC response time issue in the environment. Sometimes you have a large wait time and you can set a RFC groups in order to avoid that.
Be sure that the user used in the RFC connections are correct and if the roles assigned are the necesary.
If all of this points are correct you can try to reduce the amount of records and the size in every InfoPackage .
hope this help you

Similar Messages

Extraction : No IDocs could be sent to BI using RFC.

I am using BI 7.01 SP006 . When extracting data, I got following error message :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Please could you help
Thanks in advance

Hi,
The problem seems to be with "SMQS". Please check whether you get WAITING and WAITCONN appearing,it appears if the maximum number of connections has been reached or if the scheduler is waiting for a connection to become available again.
Have a look into the below links:
http://webcache.googleusercontent.com/search?q=cache:NrEUCUI2lXMJ:help.sap.com/saphelp_nw04/helpdata/en/af/d4fa40ee14f26fe10000000a1550b0/content.htm+SMQS&cd=1&hl=en&ct=clnk&gl=in
Regards,
Lakshminarasimhan.N

Error: No IDocs could be sent to the SAP BW using RFC.

Hello Experts,
I am getting following error while loading data into BW:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Please advice how should i proceed in this case..
Regards
Priyanka

Hi......
Transactional RFC is an asynchronous communication method that executes the called function module just once in the RFC server. The remote system need not be available at the time when the RFC client program is executing a tRFC. The tRFC component stores the called RFC function, together with the corresponding data, in the SAP database under a unique transaction ID (TID).
If a call is sent, and the receiving system is down, the call remains in the local queue. The calling dialog program can proceed without waiting to see whether the remote call was successful. If the receiving system does not become active within a certain amount of time, the call is scheduled to run in batch.
Ur trfc connection not available may be because due to the work processors in R/3 would have not been available for the whole period of ur loading process .
Pls wait for the parallel processes to end and then load ur data again after deleting the bad req from the manage tab
if this error persists then go for a Ticket
Hope this helps you......
Thanks==Points as per SDN.......
Regards,
Debjani........
Edited by: Debjani Mukherjee on Sep 29, 2008 6:50 AM
Edited by: Debjani Mukherjee on Sep 29, 2008 6:52 AM

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

Using RFC in File to Idoc Scenario

Hi all,
I got a complex requirement in EDI to IDOC Scenario , I am getting EDI 850 file from Customer and posting IDOC to R3 . In this process i need to have some validations using RFC(Which connects to R3) at XI level, If these validations fails then we should not post Idoc to R3 and we need to send back a mail to customer. I am not expert at XI, So can you please suggest is there is any way to build this requirement.
Thanks for looking into this. Your help is appreciable
Thanks,
Kishore

HI Kishore,
I got a complex requirement in EDI to IDOC Scenario , I am getting EDI 850 file from Customer and posting IDOC to R3 . In this process i need to have some validations using RFC(Which connects to R3) at XI level, If these validations fails then we should not post Idoc to R3 and we need to send back a mail to customer. I am not expert at XI, So can you please suggest is there is any way to build this requirement.
Yes, u can achieve it by using multimappping.
First write a functional module wich is remote enabelled(just change the parameter value).
Then in message mapping u will have a multimapping,with mail (0..1) occurence.
If suppose the validation fails u will send a flag or a field which to PI, and based on this value the mail is sent to the recepients.
In operation mapping make sure that Mail occurence is 0..1.
If any prblm still.. pl do post.
Babu

Which IDoc Type and Message Type to use for Credit Memo?

Could you guys please tell me which IDoc type and Message Type to use for Credit Memo? Also if possible tell me the process code/ function module.
Will certainly give points for right answer. Thank you for reading.

Hi,
You can use IDoc type FIDCCP02 with message type FIDCC1/FIDCC2 for Credit Memo.
Also you can use this FM FI_IDOC_CREATE_FIDCC1/
FI_IDOC_CREATE_FIDCC2 to generate the IDoc.
Regards,
Ferry Lianto

Link idoc in R3 sent form PI

hi,
can you share somethoughts on finding the idoc created by xi....i know how to find using message type but is it possible to find it via the xi message id?

Hi,
I think Prabhu means that he wants to search in R3 for Idocs that were sent there from PI to R3.
I dont think IDX5 can give you those Idocs. Idx 5 is only usable for Idocs sent from R3 to the PI system.
But than i'm not sure how to find the particular Idoc in the R3. I think it would be best to get a close range of date/time from PI and then use that same range in R3 in transaction WE02.
Kr
Robert

Idocs not being sent from 4.6c to 6.0 system

Hello,
I am sending Idocs from a 4.6c R/3 system to a 6.0 R/3 system. I can see that the Idocs are being created and sent to port OK (status 03) in the 4.6c system but not able to see the Idocs in the 6.0 system.
Actually, there are 2 cases but in both cases I am using the same function module 'ALE_DISPUTE_CREATE' to send the Idocs but only in the first case Idocs are received in the 6.0 system. I checked the parameters of the function module in both the cases and they are same in both the cases with the only difference being the values.
One more difference is the way the data is prepared . In the first case, 'FDM_CASE_DATA_PREPARE' is used to prepare the data and in the second case I am creating the data using normal data extraction and internal tables after which I pass the datas to the function module 'FDM_COM_CASE_CREATE' which is also used in the first case.
'ALE_DISPUTE_CREATE' is within this function module.
I checked the queues in both the systems and did not find anything stuck there. One more interesting case, If I copy the Idocs which are not being sent using WE19, the Idocs are being sent correctly and received correctly in the 6.0 system.
Please advice.
Thanks,
Laxman.

Hi Laxman,
You said that the Status of the IDOC at sender side is '03', have you checked the status of IDOC in reciever system. Check the details of DOC using WE02. Use BD87 to Monitor the messages issued during IDOC processing. These messages will help you to reach to the exact problem.
Regards,
Vaishali.

TS1424 i forgot provide recure email andsecurity questions and answers. Could you sent it again please?thanks

i forgot provide recure email ,security questions and answers. Could you sent it again please?thanks
<Email Edited by Host>

Not going to happen from here. We are users, not Apple. You need to change your rescue email address in your own Apple ID.
The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

We used to get a 'whooshing' noise when we sent an eMail using mac Mail. This no longer happens. We recently updated to Mountain Lion 10.8.1 Can anyone throw light on this please? David

We used to get a 'whooshing' noise when we sent an eMail using mac Mail. This no longer happens. We recently updated to Mountain Lion 10.8.1 Can anyone throw light on this please? David

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Idoc- can we sent already sended idoc if status is showing error message

hi
Idoc- can we sent already sended idoc if status is showing error message
without making any changes.
Thanks in advance.

Hi raja,
IN BD87.
give the idoc number,its status,messagetype and partner system and resend it.
Regards,
nagaraj

Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?

Just installed mountain Lion. Viewing a pdf sent to me using preview and some colors are appearing BLACK, however when I view the same PDF in Acrobat they are perfect and what they are suppose to be. WHY would PREVIEW showing a different color?

Here's what I've found on the issue:
Pantone color definitions have changed (coinciding with CS6) — they are now "Pantone+" (I think that's what they're called). The "+" apparently means they're now LAB colors. Lab colors are not properly displayed in Preview (or in Finder previews) — they display as black (as far as I can tell, in all circumstances). I'm sure it's a tad more complicated than that, but that's the gist.
Now the bad news — nobody seems to know anything about a fix or workaround (unless you convert your PDFs to process — this might be a fix for sending to clients). It causes issues for me in AI files — being able to view them in the finder (with previews) is a HUGE time saver for my workflow... when they're all black, not so much.
In my chat with a director of product dev at Adobe, they placed the responsibility to fix on Apple (assuming Apple wants to support Pantone color definitions in their OS).

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

HT3697 i am trying to open a pdf sent by email using keynote

Hi I am needing help opening a pdf sent via email using keynote

I just tried an experiment.
I created a PDF file and e-mailed it to myself. I then checked my e-mail on my iPad in Mail. The PDF appeared as an attachement. When I clicked on it it opened, apparently in Mail.
Am I misunderstanding your situation since Keynote does not seem to be involved at all?

TS3991 I organazied my contacts by the address of my tenants. I just joined to Icloud and I am not able to find my tenants in the directory in the computer at all. I could search when I am using my phone but they do not show at first.how can correct this?

I am a landlord and I organazied my contacts by the address of my tenants. I just joined to Icloud and I am not able to find my tenants in the directory in the computer at all. I could search when I am using my phone but they do not show at first.how can correct this? as an example 37 31 1 and when i type this nothing is showing.

I am a landlord and I organazied my contacts by the address of my tenants. I just joined to Icloud and I am not able to find my tenants in the directory in the computer at all. I could search when I am using my phone but they do not show at first.how can correct this? as an example 37 31 1 and when i type this nothing is showing.

No IDocs could be sent to BI using RFC.

Similar Messages

Maybe you are looking for