No image but screen backlight and webcam working perfect
I own an 13' macbook pro mid 2010 and i got a problem with the display actually my Lvds connector was damaged on my logic board and got it changed but now my screen backlight and webcam only are working and i dont have any image on my display. i can toggle my backlight on and off but i dont have any image on my display. i am using an external monitor as display for the time being. help pls.
Ask whoever changed your Lvds connector to finish the job correctly. They will likely want to know about and correct your problem with their service.
Similar Messages
-
I'm on Vodafone, but can't make or receive calls. Viber, messaging and the Internet work fine. I've an iPhone 4. Any ideas?
Did you activate roaming before going abroad?
Click on EE & ME and where it says My Account, click on Devices and Usage and enable it from there, cllick on EE & ME and where it says travel and shopping click on using phone abroad.
http://ee.co.uk/help/add-ons-benefits-and-plans/call-or-going-abroad/roaming---using-your-phone-abroad/using-4g-abroad -
My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Finally got face time to work - but screen freezes and can't continue the call
finally got face time to work - but screen freezes and can't continue the call - how can I fix this problem?
Probably a network problem but see here for troubleshooting: http://support.apple.com/kb/TS3367
-
I just installed my apple tv and set it to mirroring and it worked perfect. One hour later it will will only play audio on mirror, it does not show the screen image of the ipad on the tv.
restart ipad, appletv and wifi router
-
I cracked my iPod touch screen...how much would it cost to replace the screen? The iPod works perfectly, but the pieces of the screen are chipped and cracked. Please help!
Contact Apple or a third party repair center and ask.
-
made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
class Program
#region Cosmos Builder logic
// Most users wont touch this. This will call the Cosmos Build tool
[STAThread]
static void Main(string[] args)
BuildUI.Run();
#endregion
// Main entry point of the kernel
public static void Init()
var xBoot = new Cosmos.Sys.Boot();
xBoot.Execute();
Console.ForegroundColor = ConsoleColor.DarkBlue;
a:
Console.WriteLine("------------------------------");
Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
Console.WriteLine("------------------------------");
Console.WriteLine();
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("\t _____
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |___________");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t| | | |
| | |");
Console.WriteLine("\t|_____| |____________| |____________| ____________");
string input;
Console.WriteLine();
Console.Write("\nAbout OS : a");
Console.Write("\nTo Shutdown : s");
Console.Write("\nTo Reboot : r");
Console.Write("\nStart Windows Normaly : n");
Console.WriteLine();
input = Console.ReadLine();
if (input == "s" || input == "S"){
Cosmos.Sys.Deboot.ShutDown();
else
if (input == "r" || input == "R"){
Cosmos.Sys.Deboot.Reboot();
else
if (input == "a" || input == "A"){
Console.ForegroundColor = ConsoleColor.DarkBlue;
Console.Clear();
Console.WriteLine("\n\n\n-------------------------------------");
Console.WriteLine("version: DISPLAYS OS VERSION");
Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
Console.WriteLine("-----------------------------------");
Console.Write("You Want to know : ");
input = Console.ReadLine();
if (input == "version"){
Console.WriteLine("--------------------");
Console.WriteLine("OS VERSION 0.1");
Console.WriteLine("--------------------");
else
if (input == "about"){
Console.WriteLine("--------------------------------------------");
Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
Console.WriteLine("--------------------------------------------");
Console.Write("Want to go back to the main window");
Console.Write("\nYes : ");
string ans = Console.ReadLine();
if (ans == "y" || ans == "Y")
goto a;
Thread.Sleep(10000);
else
if (input == "n" || input == "N")
Thread.Sleep(5000);
Console.Clear();
for (int i = 0; i <= 0; i++){
Console.Write("\n\n\n\n\t\t\t\t\t ____ ____ ___
Console.Write("\n\t\t|\t\t | | | |
| | | | | |");
Console.Write("\n\t\t|\t| | |---- | |
| | | | | |---");
Console.Write("\n\t\t|____|____| |____ |___ |____ |___| | | |___");
Thread.Sleep(500);
Thread.Sleep(5000);
Console.Clear();
BootUserInterface();
Console.ReadLine();
// Form1 fo = new Form1();
else{
for (int i = 0; i <= 5; i++){
Console.Beep();
Thread.Sleep(1000);
goto a;
while (true);
private static void BootUserInterface() {
Thread t = new Thread(UserInterfaceThread);
t.IsBackground = true;
t.SetApartmentState(ApartmentState.STA);
t.Start();
private static void UserInterfaceThread(object arg) {
Form1 frm = new Form1(); // use your own
Application.Run(frm);
Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Downloaded Movies suddenly not working. Appear to be running but screen blank. Music works OK
Downloaded Movies suddenly not working. Appear to be running but screen blank. Music works OK
Hi Dingo1936,
That's unusal that downloaded movies would stop playing correctly. Try running through the troubleshooting article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
-Jason -
hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...
Just do a restart. It seems to clear it up.
-
im trying to type my password but only zero and nine work I tried restarting but it still wont work have any ideas please answer ASAP
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPhone wouldn't connect to my wifi at home but connects to others when i go out. i have tried resetting my whole phone and network settings but still wouldn't work. Everyone in my house has an iPhone and theirs work perfectly. I need help. it randomly started working yesterday after not connecting for 4 days and suddenly it stopped working again today
The two things to try first are renewing your network lease, forgetting the network and if that doesn't work to reset all networks. You might have tried one of these but I'll repeat the steps just to make sure.
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Renew Lease
If that doesn't work then
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Forget this Network
If that doesn't work
Settings > General > Networks > Reset All Networks > then reset your iPhone by
Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
I hope one of these will help. -
When i try to use Command c it dose not work at all with any program but Command x and v works ?
when i try to use Command c it dose not work at all with any program but Command x and v works ?
i don't know what to do and how to fix it and why it habend ??????!!!!!!!!!Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(63123) -
White screen with Apple logo and rotating pin wheel. Carried unit to Peach Mac and it worked perfect there. Justed started doing this again. Any help?
Have a look at > Mac OS X: Gray screen appears during startup
-
i cannot use apps on my ipod as when i turn on my ipod the wi-fi works but after a minute of 2 it stops working and then have to wait ages for it to work again. i have checked my internet but my laptop and playstation works work fine.
Try here
iOS: Troubleshooting applications purchased from the App Store
Maybe you are looking for
-
Hi! I am in troubble following is the query SELECT inv_no, inv_name, inv_desc, i.cat_id, cat_name, i.sub_cat_id, sub_cat_name, asset_cost, del_date, i.bl_id, gen_desc bl_desc, p.prvcode, prvdesc, cur_loc, pldesc, i.pmempno, pmname, i.empid, empname F
-
How do I reinstall the osx on a second hand macbook pro?
My partner recently purchased the latest release of the Macbook Pro and gave me his old one. The problem is that it is still tied to his info and passwords and I would like to somehow completely wipe the system and reinstall it afresh. I have his pas
-
I have been adding news items to the Featured News Widgets. The content area does not size to the text in the news content window. Each item has a long window of empty content space where the text ends. I can't see a place where this can be configure
-
Appear in a wiondow when I try to launch aperture. Never seen it before. Can't get past this to access the program.
-
At least one entry could not be found in object buffer
Hi All, I am frequently getting the message <b>'At least one entry could not be found in object buffer'</b> when I am saving a service process through CRMD_ORDER. Does anybody have faced the similar situation, if so pls help me on this. (Note: For yo