No image in the preview screen in the print module = gray print

I have been using LR for some time now. Today, in the middle of printing, I suddenly printed a grey print. It did have the copyright on it and contained a message in red "Out of memory Abe" in reverse in the lower right of the print. I started looking for the problem and noticed that there was no photo showing in the perview screen in the left most panel while in the print module. I restarted the machine, and cycled the printer several times - all no change and still printing gray.
printer is Epson 7800, OS is windows XP
thanks in advance

I have done this across several different folders, yet the problem still remains. Really odd that this is suddenly started in the middle of one of my print jobs.
Thanks

Similar Messages

How do I create a collectio from developed images in the develop module of Lightroom 5?

How do I create a collestion of developped and modified images in the develop module of Lightroom 5

Right-click on Tone Curve and choose basic again or press Ctrl+1 in Develop.
On Mac (Control-Click or Cmd+1)

Why can't I edit images in the develop module? It's telling me folders cannot be found.

Why can I not edit images in the develop module? It is telling me that the source folders cannot be found.

When I click on the RSS button, I got this
message:
"Safari can’t open the page “feed://wwwhome.cs.utwente.nl/~fiorezet/UT/Publications/rss.xml”. The error was: “unknown error” (NSURLErrorDomain:-1)
Will need to look further into that one.
I used the Feed Validator Website to check my RSS files. The Website says: "This feed does not validate". The site also shows in which lines the errors are. The link below shows what I mean:
http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwwwhome.cs.utwente.nl%2F%257 Efiorezet%2FUT%2FHome%2Frss.xml
What should I do to solve my problem?
Regards,

After the new 10.9.2 Maverick upgrade, my Photosmart C4480 3 in 1 printer can not scan and save the file to desktop or documents. You can only see the image in the print preview area. Does anyone know how to fix this or when a fix will be out?

After Aple support downloaded the new 10.9.2 Maverick upgrade on my MacBook Air, my Photosmart C4480 3 in 1 printer can not scan a document and load the file on to my desktop or document file. (You can see the doc image in the preview but it doesn't save it.) Does anyone know an Apple fix for this or when the fix will be out? After hours of trying reloading, and the usual fixes, etc. Apple told me to call HP, and HP told me they don't support Mac. It does not seem honorable of Apple to put out an upgrade and not tell people it will destroy their scanning ability, and that the only thing to do is to buy another printer/scanner.

Have you tried using Applications/Image Capture to scan.
Vuescan often works.
VueScan
VueScan FAQ

No longer able to edit images inside the blog module? Has BC removed this function?

When inserting images into a blog post I used to be able to resize images, add margins, etc. I tried to do this recently but those tools were no longer there. Is this no longer available? Below is a screenshot of what it used to look like.
Since there is no featured image for blog posts I've been inserting images into the first paragraph as a work around. Not being able to edit those images directly in the blog module is going to make that more difficult.
I've been able to resize the image through code, but this is not exactly user friendly for clients.

Hi Beth, Liam answered this for me on another post.
Go into site settings / beta features/ untick active beta feature untick "enable for everybody". That should do the trick.
Check this link to see the conversation I am having with liam as I think we are on the same page....or maybe you can help with my questions...
is it possible to truncate the blog so 2 paragraphs show up?
cheers,
d

Pixelated lines across images from the web module in LR

I use Lightroom 5.2 and am having problems when exporting via the Web module. When I use the basic LR HTML template or plug-ins like Juicebox and TTG, there are pixelted lines acorss some (but not all) of the images. This has started to happen in the last few weeks. Any thoughts/suggestions?

Here's my guess ... somehow the file has gotten corrupted.
I can't tell you exactly what step it got corrupted at ... you'll have to do the research ... it could be that it is corrupt on your hard disk, and Lightroom is attempting to use a corrupted photo; or it could be when Lightroom exports via the Web Module the file is saved in correupted form (most likely cause is a bad hard disk); or it could get corrupted in the upload; or it could be corrupted on the hard disk on the server (bad hard disk again).

How do I view two "different" images in the Develop module so I can match exposure ?

Seems like a dumb question, but for the life of me cannot figure this out ?
Thx

I am not aware of any view mode in the Developer module that is similar to the Library module's Compare View mode. If the images you are trying to adjust were taken at the same time under similar lighting, you can select the settings of the image you adjusted and copy them to the other images. Select the image whose setting you want to copy and then click on the Copy button found in the bottom left side panel. This will display the Copy Settings panel. Insure the setting you want to copy are checked and any you don't want to copy are unchecked. Click the Copy button. Next, select one or more images you want to copy the setting to and click on the Paste button (bottom of left panel). The selected setting will be applied to the selected images. You can also perform a similar function when in the Library module but this time, look for the Synch Settings button found at the bottom of the right hand panel. Button names are changed but the dialog is essentially the same. Photos can be selected either in grid view or the film strip.

Why is the image in the Print window darker?

Hi,
I use the same ICC profile in my regular viewer as in the Print window. The difference is 1/3 to 1/2 stops. Any ideas as to why and how to correct it, and...which is the most accurate?
Thanks,
Raphael

it looks stretched taller.
I think you have Anamorphic material.
Start a new Sequence. Go to Sequence > Settings and click the Anamorphic checkbox.
Select a clip in the Browser. Press command and 9. Find Anamorphic in the column on the left.
Click next to it in the Clip column to place a check mark there too.
Edit into the timeline.
Does that look better?

Pdf image good in preview but distorted when printing without preview

Hi all, I have added a graphic to my adobe form and it looks good when I view the pdf. It also prints fine when I open the pdf and then print it. The problem is when the pdf is sent directly to the printer without previewing it, the image will print but the colors will be distorted.
The image was saved as 256 colors bmp and uploaded using SE78.
Any help is appreciated:). Thanks.

HI friend,
I think it might be the problem with the printer settings just check that else what it must have happened is some code gets trigerred during the print preview which makes the color to print correctly.
But while sending directly that part of code might not have been executed. Try to debug if possible and see whether its because of this else see the printer settings.
I think this might be the issue there might not be any error from smartform.
Just check the driver program print settings also.
If you still face issues please revert back to me i will help you.
Thanks,
Sri Hari.

Some windows-user could not see all images on the print result

We have a Problem when printing images (blobObject).
We are printing all displayed images immediately on the report. The images are represented on the report by Blob objects. At runtime we create a Bitmap object in memory, which is stored in a memory stream, the byte array of MemoryStream is placed in the field of the DataSet, which has deposited on the report as BlobObjekt.
The error that occurs is that some Windows-User didnu2019t see all pictures. But without any Errormessage, the picture is still white.
All users use the same Windows-PC with the Crystal Report Version 10.2.3600.0 .
The difference between the pictures is simple:
Picture 1)
-     Note: This picture appears properly
-     This one exists as JPG-File on the harddisk
-     We read the image, convert it into a memory stream and place the byte array in de DataSet-Field
-      This images are positioned in the header and footer section
Picture 2)
-     Note: this picture does not display properly
-     This one is created by the application
-     It is created in memory by an graphics-object
-     This graphics-Object is converted into an memory stream and so on
-     This images are positioned in the details section
Here are the piece of code, which is the dataset supplied with pictures. (abbreviated version)
Using stream As IO.MemoryStream = New IO.MemoryStream
Using dest As Bitmap = New Bitmap(field.Width, field.Height)
            Using gd As Graphics = Graphics.FromImage(dest)
gd.Clear(Color.White)
gd.DrawImage(Source, destrect, sourcerect, GraphicsUnit.Pixel)
dest.Save(stream, System.Drawing.Imaging.ImageFormat.Bmp)
            End Using
      End Using
ds.Tables(datasourceTableName).Rows(j)(datasourceName) = stream.ToArray
stream.Close()
End Using
Has anyone an ideo whats going wrong?
The logic to print the images is always the same only the windows user is different.

Is this a web or windows based application?
Is this happening on the same computer but with a different user? It could be a user rights issue. Try using the Process Monitor tool to see if it is highlighting any permissions issues.
Regards,
Jonathan

I have Lightroom 5. How do I rotate images in the development module?

The heading says it all...

Well actually, it doesn't say it all
Do you mean rotate a few degrees to get the horizon level, or 90 degrees because the camera or software didn't properly recognize the photo was either landscape or portrait, or 180 degrees; or change from landscape to portrait without rotating 90 degrees; or what?

How to upload image to the progrogram...

I am trying to upload the image to the function module but it says the "sunset.jpg" is feild unkonwn it is not defined by the data...
and when i am passing this image stuff at the runtime... it gives me the memory dum.. would you like to help me... i am creating a splash screen with this code....
i am giving you the code below...
Regards
Naim
Code listing for function: ZJNC_START_SPLASH
Description: Show Splash at Start
FUNCTION zjnc_start_splash.
""Local interface:
*" IMPORTING
*" REFERENCE(IMAGEFILE) TYPE C DEFAULT 'THANKS.JPG'
*" REFERENCE(WIDTH) TYPE I DEFAULT 415
*" REFERENCE(HEIGHT) TYPE I DEFAULT 274
*" REFERENCE(TIMEOUT) TYPE I DEFAULT 3
*" REFERENCE(CALLBACK) TYPE C
 Global data declarations
MOVE imagefile TO g_name.
MOVE width TO picwidth.
MOVE height TO picheight.
MOVE timeout TO pictimeout.
MOVE callback TO piccallback.
TRANSLATE piccallback TO UPPER CASE.
PERFORM getpicurl.
CALL SCREEN 0806.
ENDFUNCTION.
Code listing for function: ZJNC_END_SPLASH
Description: Show Splash at End
FUNCTION ZJNC_END_SPLASH.
""Local interface:
*" IMPORTING
*" REFERENCE(IMAGEFILE) TYPE C DEFAULT 'THANKS.JPG'
*" REFERENCE(WIDTH) TYPE I DEFAULT 415
*" REFERENCE(HEIGHT) TYPE I DEFAULT 274
*" REFERENCE(TIMEOUT) TYPE I DEFAULT 3
 Global data declarations
MOVE imagefile TO g_name.
MOVE width TO picwidth.
MOVE height TO picheight.
MOVE timeout TO pictimeout.
PERFORM getpicurl.
CALL SCREEN 2009.
ENDFUNCTION.
Code listing for: LZUTILTOP
TOP level Include of Function Group ZUTIL
Author Jayanta Narayan Choudhuri
 Flat 302
 395 Jodhpur Park
 Kolkata 700 068
 Email [email protected]
 URL: http://www.geocities.com/ojnc
FUNCTION-POOL zutil. "MESSAGE-ID ..
TYPE-POOLS: abap.
DATA: graphic_url(255),
 g_result TYPE i,
 g_linesz TYPE i,
 g_filesz TYPE i,
 g_name(100).
TYPES: t_graphic_line(256) TYPE x.
DATA: graphic_line TYPE t_graphic_line,
 graphic_table TYPE TABLE OF t_graphic_line.
DATA: picwidth TYPE i,
 picheight TYPE i,
 pictimeout TYPE i,
 piccallback(60) TYPE c,
 first TYPE boolean.
 CLASS ZCL_ES_SPLASH_SCREEN DEFINITION
CLASS zcl_es_splash_screen DEFINITION.
PUBLIC SECTION.
 EVENTS on_close.
 METHODS constructor
 IMPORTING
 !i_num_secs TYPE i DEFAULT 5
 !i_url TYPE c
 !i_width TYPE i
 !i_height TYPE i.
PROTECTED SECTION.
 METHODS handle_end_of_timer
 FOR EVENT finished OF cl_gui_timer.
PRIVATE SECTION.
 DATA container TYPE REF TO cl_gui_dialogbox_container.
 DATA image TYPE REF TO cl_gui_picture.
 DATA timer TYPE REF TO cl_gui_timer.
ENDCLASS. "ZCL_ES_SPLASH_SCREEN DEFINITION
CLASS ZCL_ES_SPLASH_SCREEN IMPLEMENTATION
CLASS zcl_es_splash_screen IMPLEMENTATION.
METHOD constructor.
 DATA: image_width TYPE i,
 image_height TYPE i.
 COMPUTE image_width = i_width + 30.
 COMPUTE image_height = i_height + 50.
 CREATE OBJECT container
 EXPORTING
 width = 10
 height = 10
 top = 10
 left = 10
 name = 'DialogSplash'.
 CALL METHOD container->set_caption
 EXPORTING
 caption = g_name.
 CREATE OBJECT image
 EXPORTING
 parent = container.
 CALL METHOD image->load_picture_from_url
 EXPORTING
 url = i_url.
 image->set_display_mode( image->display_mode_normal_center ).
 cl_gui_cfw=>flush( ).
 container->set_metric( EXPORTING metric = image->metric_pixel ).
 DATA: myleft TYPE i,
 mytop TYPE i.
 COMPUTE myleft = ( 800 - image_width ) / 2.
 COMPUTE mytop = ( 600 - image_height ) / 2.
 IF myleft < 0.
 MOVE 0 TO myleft.
 ENDIF.
 IF mytop < 0.
 MOVE 0 TO mytop.
 ENDIF.
 container->set_position(
 EXPORTING
 height = image_height
 left = myleft
 top = mytop
 width = image_width ).
 cl_gui_cfw=>update_view( ).
 CREATE OBJECT timer.
 timer->interval = i_num_secs.
 SET HANDLER me->handle_end_of_timer FOR timer.
 timer->run( ).
 cl_gui_cfw=>flush( ).
ENDMETHOD. "constructor
METHOD handle_end_of_timer.
I wanted NAMASTE to remain until JOB was complete.
 IF container IS NOT INITIAL.
 container->free( ).
 CLEAR container.
 FREE container.
 ENDIF.
 IF timer IS NOT INITIAL.
 timer->free( ).
 CLEAR timer.
 FREE timer.
 ENDIF.
 cl_gui_cfw=>flush( ).
 RAISE EVENT on_close.
ENDMETHOD. "handle_end_of_timer
ENDCLASS. "ZCL_ES_SPLASH_SCREEN IMPLEMENTATION
 CLASS lcl_event_handler DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS: on_close FOR EVENT on_close OF zcl_es_splash_screen.
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD on_close.
 IF sy-dynnr = 2009.
 LEAVE PROGRAM.
 ELSE.
 MOVE abap_false TO first.
 PERFORM (piccallback) IN PROGRAM (sy-cprog).
 ENDIF.
ENDMETHOD. "on_close
ENDCLASS. "lcl_event_handler IMPLEMENTATION
DATA: splash TYPE REF TO zcl_es_splash_screen.
*& Module STATUS_0806 OUTPUT
MODULE status_0806 OUTPUT.
IF first IS INITIAL.
 first = abap_true.
 SET TITLEBAR 'TITLE0806'.
 CREATE OBJECT splash
 EXPORTING
 i_num_secs = pictimeout
 i_url = graphic_url
 i_width = picwidth
 i_height = picheight.
 SET HANDLER lcl_event_handler=>on_close FOR splash.
ENDIF.
ENDMODULE. " STATUS_0806 OUTPUT
*& Module STATUS_2009 OUTPUT
MODULE status_2009 OUTPUT.
IF first IS INITIAL.
 first = abap_true.
 SET TITLEBAR 'TITLE2009'.
 CREATE OBJECT splash
 EXPORTING
 i_num_secs = pictimeout
 i_url = graphic_url
 i_width = picwidth
 i_height = picheight.
 SET HANDLER lcl_event_handler=>on_close FOR splash.
ENDIF.
ENDMODULE. " STATUS_2009 OUTPUT
*& Form getpicurl
FORM getpicurl.
OPEN DATASET g_name FOR INPUT IN BINARY MODE.
REFRESH graphic_table.
CLEAR g_filesz.
DO.
 CLEAR graphic_line.
 READ DATASET g_name INTO graphic_line ACTUAL LENGTH g_linesz.
 ADD g_linesz TO g_filesz.
 APPEND graphic_line TO graphic_table.
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
ENDDO.
CLOSE DATASET g_name.
CLEAR graphic_url.
CALL FUNCTION 'DP_CREATE_URL'
 EXPORTING
 type = 'IMAGE'
 subtype = 'GIF'
 TABLES
 data = graphic_table
 CHANGING
 url = graphic_url
 EXCEPTIONS
 dp_invalid_parameter = 1
 dp_error_put_table = 2
 dp_error_general = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 EXIT.
ENDIF.
ENDFORM. "getpicurl

Use this program..
create object cust_container
exporting
 container_name = 'MYCONTAINER1'
CREATE OBJECT split_container
EXPORTING
 LINK_DYNNR =
 LINK_REPID =
 SHELLSTYLE =
 LEFT =
 TOP =
 WIDTH = 10
 HEIGHT = 40
 METRIC = cntl_metric_dynpro
 ALIGN = 15
 PARENT = cust_container
 ROWS = 2
 COLUMNS = 2
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
EXCEPTIONS
 CNTL_ERROR = 1
 CNTL_SYSTEM_ERROR = 2
 others = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD split_container->get_container
EXPORTING
 row = 1
 column = 1
receiving
 container = cus_cont.
create object picture
exporting
 parent = cus_cont
clear url.
path = 'ZNAVEEN'.
perform get_url using path.
CALL METHOD picture->set_display_mode
 EXPORTING
 display_mode = cl_gui_picture=>display_mode_fit
EXCEPTIONS
 ERROR = 1
 others = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Use this Perform to load Picture
form get_url using p_path.
DATA query_table LIKE w3query OCCURS 1 WITH HEADER LINE.
DATA html_table LIKE w3html OCCURS 1.
DATA return_code LIKE w3param-ret_code.
DATA content_type LIKE w3param-cont_type.
DATA content_length LIKE w3param-cont_len.
DATA pic_data LIKE w3mime OCCURS 0.
DATA pic_size TYPE i.
REFRESH query_table.
query_table-name = '_OBJECT_ID'.
query_table-value = p_path.
APPEND query_table.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
 TABLES
 query_string = query_table
 html = html_table
 mime = pic_data
 CHANGING
 return_code = return_code
 content_type = content_type
 content_length = content_length
 EXCEPTIONS
 object_not_found = 1
 parameter_not_found = 2
 OTHERS = 3.
IF sy-subrc = 0.
 pic_size = content_length.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
 EXPORTING
 type = 'image'
 subtype = cndp_sap_tab_unknown
 size = pic_size
 lifetime = cndp_lifetime_transaction
 TABLES
 data = pic_data
 CHANGING
 url = url
 EXCEPTIONS
 OTHERS = 1.

LR5 - Selected image does not display in the Develop Module

I recently upgraded to LR5 from LR4.1. I have seen on several occasions where the selected image in the Develop Module does not appear. I can move back to the LIbrary view and the image appears, but when I switch back to the Develop Module, the image disappears and only a black box appears (dark grey really). This seems to happen after I have deleted flagged files using the ALT-Backspace shortcut. This has happeded when I deleted while in the Library and Develop Module, but does not happen every time. I have disabled the "Show photo on Mouse Over" view option. Prior to that, the preview window shows the selected or moused over photo.
The only thing I can do to get the develop module to work again is to restart Lightroom. I've seen no other posts regarding this issue and it is very annoying when trying to go through 4000 photos! I can find no place to report bugs, so I am posting this here.

i found LR5 the most bug infested LR version ever.
i "use" it only as test setup.
real work i still do with LR 4.4.
dav_miller wrote:
How does this issue get reported to Adobe as a bug or is the fact that it is in the forum take care of that?
nope.. in this forum you will only hear that this is not such a big issue and will be fixed soon.
honestly im waiting for some bugs to be fixed since v3.6..... and i gave up on reporting new bugs to adobe.
i just hope that some day they will be fixed.
there is a text layer bug in photoshop i reported back in 2011 and that´s still in photoshop CC.....

Certain websites like Craigslist show a scrambled, blurry security word image that the user has to type into a field in order to submit an ad. With Firefox, the word doesn't show up in the field. I have to open Explorer to accomplish this task.

When a user posts an ad on Craigslist, they are sent an e-mail with a link. Clicking on this link brings the user to a page where the ad content can be checked, and the last step is to retype the scrambled security word into a field. When I'm on Firefox, this word (which I'm assuming is an image file like a .jpg or a .bmp) does not appear.
I just had this same problem on a website called Sailing Anarchy when trying to register a new account.

If images are missing then check that you aren't blocking images from some domains.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
* Check that images are enabled: Tools > Options > Content: [X] Load images automatically
* Check the exceptions in Tools > Options > Content: Load Images > Exceptions
* Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

If you right-click an image you can select to "Block Images" from the site, but how do you reverse this choice?

If you right-click an image on a web page you can select to
"Block Images from [the url of the site]".
This works well, particularly to make the page printer-friendly, but how do you reverse this choice to see the images again?

You can see all permissions for the current page in Tools > Page Info > Permissions
If it is from a different domain then use this:
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Hello, Sorry I have this new version problema. Ustanovil mozily are no longer automatically load images in the settings of this feature is enabled.

Здравствуйте, извините у меня такой вопрос. Я установил последнюю версию мозилы, и у браузер перестал автоматически открывать изображения, данная функция включена в настройках.

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the Media tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*https://support.mozilla.com/kb/Images+or+animations+do+not+show
*http://kb.mozillazine.org/Images_or_animations_do_not_load

No image in the preview screen in the print module = gray print

Similar Messages

Maybe you are looking for