No image or sound when using TV-Out on N82

Hi
Just connected my new N82 to my PAL TV with the cable (white and red sound, yellow video, 3.5mm jack to the phone) and all I get is a distorted image and a horrible sound.
Yes, I changed the settings to PAL 4:3, but I got no better
Some help? Thanks in advance

Haven't used the N82 tv-out but I've used it on N95, N95-8GB and N96 and it works fine.
Try putting the device in Offline mode just in case something is causing interference.
Try a different input in the TV. Be sure that it's a composite input (Yellow for video and Red and White for audio). Don't use a Component input (RED, GREEN, BLUE) as this won't work. (obvious I know but some people...)
Try a different TV set.
Put just the Yellow video cable and try. If the picture is correct then maybe the audio input is the problem, or just connect the audio and check if the audio plays correctly, maybe it's the video input.
Nothing else comes to mind...
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

  • No System Sound when using Digital Out. What the?!

    Hmmm. I've searched and read many of the posts regarding sound problems on the mac mini but none experiencing what i think(?) is my problem. That being that when I use a toslink to connect my mac mini to my an external 5.1 amp the following is disabled:
    - Volume control in menu bar disabled (greyed out)
    - Apple Remote no longer controls volume
    - DVD Player volume does nothing
    - System Sound Preferences show 'Digital Out' but no options
    Can someone confirm that these should still be adjustable? I can't believe that the now I have to use my stereo remote to control my Mac ?! Kind of ruins the 'Mac as a home theatre' experience. Unless I can find a solurion I guess it's back to analogue for me :o(
    Please help!
    Wayne.
    Mac Mini, iBook, Flat Panel Lamp iMac   Mac OS X (10.4.7)  

    I can't believe it! I'm not an audiophile I just wanted to have the clearest quality sound, so for Apple to allow fibre optic connection but disable the ability to change volume just flat out *****. There should at least be the option to treat the connection as stereo. Why should I have to switch back and forward to an analogue cable if i want to use the front row remote? Not very well thought out Apple!
    Thanks for the Remote Buddy suggestion will look in to it.
    Anyone else got any ideas for a work around??

  • No Sound when using Digital out with Mac Mini

    The Digital out on my mac mini has become seriously unreliable. The sound slider is all the way up but locked, no movement is possible. The Toslink cable shows light, and when plugged into another device the amplifier receives sound.
    This is an intermittent problem, for awhile rebooting would make the sound come back, however this has stopped working.
    unplug the toslink and the built in speaker plays fine. Sound slider becomes movable.
    If you sent the sound slider to 50% then plug the toslink back in it jumps to 100% and all controls ar grayed out and 0 sound.
    any troubleshooting tips would be most appreciated as this is my primary audio video device.

    Not likely. Think about this: The output is simply a digital stream of bits. Volume does not apply to digital bits... The first place where you can adjust volume will be in an outboard DAC, a preamp or an integrated receiver.
    For a great DAC, check out ps audio "digital link III", retails currently for around $695, B stock may be avail for around 550. There is a cheaper quality DAC available from Cambridge Audio "Digital Magic", but it is not in the same league as the PS Audio or other higher cost DACs (such as Benchmark Media's DAC1).
    For a fantastic audio system that takes digital audio from a Mac Mini, I have a PS Audio DL III taking Toslink from the Mini and feeding RCA analog into a Zpre from Parasound with a couple of Zamp (zone amps) from Parasound going into very nice bookshelf speakers and in ceiling speakers.
    The volume is controlled by the Zpre amp ...As it must be

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • My Apple TV lacking sound when using iplayer etc

    Can get sound when using Airplay from some web sources but not others. Any reasons why?
    Nick

    Hmm, rebooted the mac and now works! had only tried rebooting Apple Tv before. strange, as sound was fine on mac when not using airplay
    thanks all
    Nick

  • How do I stop system sounds when using AirPlay on my MacBook Pro?

    Hi all,
    Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
    Many thanks in advance, Jon.

    Open AirPort Utility located in HD > Applications > Utilities
    From the AirPort Utility menu bar click AirPort Utility > Preferences
    Deselect:   Monitor AirPort base stations for problems

  • How do I have my phone Make sound when using "Find my phone" app

    How do I have my iPhone make sound when using "find my. Phon" app?

    You can have the app send you an email when it is found, and you can set your email tone under settings-> sounds

  • No Audio When using Video Out to Firewire

    I do not get any audio when I use Firewire ntsc as my video out. When I set video out to canvas playback then I get audio. I want to use print to video but I cannot because the audio will not work with Firewire. I get the image on my external monitor but not the audio. I checked to make sure and the audio was not on the recorded dvd. I cannot not use print to video with canvas playback.
    My Easy Setup is Format: NTSC, Use DV NTSC DV Converter. I tried using Firewire basic and got the same results.
    Please Help
    Ken

    The audio does not play at all from the timeline if video out is set to Firewire. To answer your question, no the audio does not play in the external monitor when playing back from the timeline when Canvas is used as the video out. However, I don't believe the converter box is the problem. The audio would play in the internal speakers when using firewire as video out but it does not.
    Is there a problem with FCE 4?

  • No sound when using programs

    My curve does not make any sounds when i'm using VZ Nav or when i'm using AIM.  it rings for phone calls and text and BB messenger. It won;t even make a sound in vz nav when i press the talk button.   any ideas??

    Backup your Blackberry and Wipe Handheld and test again before restoring from the backup. If its still failing, you may need to upgrade or reload the current o/s.
    New to a Blackberry? Check out http://www.discoverblackberry.com

  • Fragmented sound when using Java Synthetizator

    Hi,
    What is the reason for sound fragmentation when using
    Java synthetizator in playing midi files:
    ByteArrayInputStream mididata = new ByteArrayInputStream(data);
    AudioStream as = new AudioStream(mididata); //pre fragment? Priority problem?
    mididata.close();
    p.start(as);
    as.close();}
    catch (IOException f){System.out.println("error - " + f.toString());}
    And why there is a "blob" in loadspeakers a few seconds before
    the music starts?
    See the whole source:
    http://users.skynet.be/belgia/musitives/Synestesia.html
    Regards,
    LG
    Metacomposer GR�HN http://users.skynet.be/belgia/midi/gallery.html
    SYNESTESIA Open Source Java code generates music from any pictures

    Not sure about the fragmentation, but I guess the Blob is because you have crap in your buffer before you start to play. I don't remember what the fix is for it, but I think there is some way of clearing out the buffer.

  • Z10 Clicking sound when using earpiece

    HELP
    I bought my Z10 June 11, 2013. Using my earpiece for the first time today (June 18, 2013), I noticed that there is a clicking sound. I also notice that when I try to play a music it stops and go but when I take out the earpiece the music plays smoothly. It also notice that when I am out of the music section, it goes in and out of voice recognition. I am looking forward for  some assistance as I have been waiting so long for this phone and now this disappointment. When i go to main volume it keeps on adjusting by itself and making a ringing sound.
    Richard Thompson

    Same problem here when upgrading to 3.1.1 from 3.0, keyboard sound went REAL low no matter what the settings were set to... I just did the latest update from 3.1.1 to 3.1.2 thinking they may have fixed the problem, but NOPE same low keyboard click sound. I'm working on downgrading back to 3.0
    This *****, i need the louder click sound sometime i type notes on my ipod while at work and it a noisy plant... i need to hear what i am typing...

  • Alert sound when using Command Cut, Copy

    Hi there
    I have what seems to be a strange but recurring problem on a particular website where I have to edit a lot of text and keywords around. I'm using an Apple Macbook running on 10.7.4, but also regularly use an iMac on 10.5.11, and on both computers whenever I use Command + Cut, Copy or Paste I have to endure my alert sound over and over again.
    I know I could simply mute my volume but it's very frustrating and I'd simply like to know why it's happening.
    I have posted in the forum of the website I'm using and no other Mac users have this problem.
    If it's a Command key problem why is it specific to the website I'm using? The alert sound doesn't happen repeatedly when I'm Command + Cutting, Copying or Pasting in any other application.
    It doesn't seem to be a problem with this website because no other users are reporting this.
    I came across a similar forum discussion here but after running Repair Disk Permissions the problem isn't solved.
    Any ideas would be much appreciated!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Qosmio X770-11C - how to disable on board speakers when using Line Out?

    Hi,
    Is there any way to disable on board speakers when the line out is used.
    Currently if I plug in a cable to the hadphone socket and choose lineout on the realtek control panel, the sound is output to the line out as expected but also through the internal speakers.
    Is there any way to stop this, and only have sound going out through the line out?
    thanks
    Graeme

    If you want to hear sound on headset only you must choose Headphone option.
    Disconnect cable and connect it again. When you see small window on the screen where you can choose between headphone and line out options choose headphone and you will hear sound on external device only.
    In case you have disabled this popup dialog you can activate it manually. Open Realtek manager connect external device and when you see activated black point on the right side make double click there and change settings.

  • No Sound when Using HDMI from ATT DVR to TV

    I have a 52xv645u TV.  When I connect it to my ATT UVerse DVR using HDMI I get picture but no sound.  Using Composite everything works fine.  I've tried several HDMI cables.  If I use HDMI to my Surround Sound amp, I get both picture and sound (even with the amp volume muted).  The problem seems to be the connection between the DVR and the TV.  Does this TV support HDSC?  I believe that the DVR requires it to support it on the TV.  
    I see that there is an upgrade for the firmware for this TV.  I have a Mac so the instructions don't work right.  I've downloaded the files to a flash drive but I am not sure if they are correct because there is no list of files available.  Does anyone know what files are needed so I can be sure that my flash drive has everything it needs?
    Any help with these problems would be appreciated!  
    Thanks,
    Mark 

    Is there a list of things that are fixed in the update?   I can get sound and picture through component but I fear that it's not the same quality as it would be through HDMI.  But again, it's only when I watch TV without going through my surround sound amp.  I can watch TV through my apm and watch my Bluray DVDs through the amp and it goes via HDMI.  

  • How to embed image in html when using JTextPane, HTMLEditorKit, JavaMail

    I am developing a specialized e-mail client that has to be able to send e-mail messages (in html format with images and attachments) that can be read by standard e-mail clients, and receive similar messages from standard e-mail clients.
    I have everything working except for embedding images.
    Images are to appear in the document mixed in with the text, but that's not what I mean by "embed". By "embed" I mean that the image itself is encoded within the html.
    Here's a bit of code to set the context.
    JTextPane bodyPane = new JTextPane();
    bodyPane.setEditorKit(htmlEditorKit);
    bodyPane.setTransferHandler(new DropHandler());
    bodyPane.setDocument(new HTMLDocument());
    In the DropHandler I have the following:
    HTMLDocument htmlDoc = (HTMLDocument) bodyPane.getDocument();
    HTMLEditorKit htmlKit = (HTMLEditorKit) bodyPane.getEditorKit();
    int caretPos = bodyPane.getCaretPosition();
    At this point get "filename", the full path to an image file that has been dropped onto bodyPane.
    String htmlString = "<img src=\"file:///" + filename.replace("\\","/") + "\">";
    htmlKit.insertHTML(htmlDoc, caretPos, htmlString, 0, 0, HTML.Tag.IMG);
    This works just fine. The image is displayed in the document at the point of insertion.
    However, the image itself is an external file. I need to send an e-mail with this image and could send the image file as an attachment, but I obviously can't assume that the recipient of the email is going to save the attachment into the proper location.
    What is the best way to do this?
    There is a technique for embedding the actual image in the html, using this syntax:
    String htmlString = "<a href=\"data:image/png;base64,---mimed png image here--\" alt=\"Red dot\"></a>";
    I can't get this to work in JTextPane, so perhaps it's not supported. Also, there may be limitations on the size of an image. And apparently Internet Explorer doesn't support this.
    From what I read, using a "content identifier", that is, "cid:" and adding the image as another part of the e-mail message is probably the thing to do. I haven't taken the time to explore this yet.
    Does JTextPane support cid? Is that a nonsense question? I suspect what I need to do when the message is being composed is use absolute paths to local files with the images, and then when assembling the e-mail, attach the files and rewrite the html to build in the cid linkage. Similarly, when reading a message with cid's, the thing to do is save the body parts as files and rewrite the cid to point to the actual file.
    I have seen others ask similar questions, one as recently as last December, and the reply was to refer to a Sun tutorial. But that tutorial doesn't address the full problem of 1) inserting an image into a document (instead of attaching an image to a component) and 2) sending it as an e-mail message.
    I have yet to see an example that shows the complete package.
    Am I right that the data option I mentioned is not going to work?
    Am I right that cid is the best approach, and do I understand how to use it?
    Is there something else?
    Thanks
    John

    Hi Rocky,
    Are you using the DC?
    if yes then you need to put the image inside the component folder. after that close the application
    & reopen. You will get the image.
    In case this does not work then try refreshing the portal through server side. Once the cache is cleared, it will be up to view.
    Also check the Activity list you have created. It should be added to the dtr properly or else it wont be reflected once reimported the configurations.
    Regards
    Chander Kararia

Maybe you are looking for