No Image Size menu or Message Size report in New Message window

Greetings all,
New iMac user (OS X 10.5.8, Mail 3.6). In scanning Mac Help & the Apple Support forums, I note numerous references for Mail 3.6 to an Image Size Menu button at bottom right of Compose window, and a Message Size window at the bottom left. Have never seen these items. Are they hidden? If so, what is the reveal? Appreciate any assistance. Thank you.
Gallery Info

To All,
After sending in my question, I went back to Mail Help & noticed that images could be attached by dragging from Photo Browser or Desktop or Finder, or by clicking on the 'Paperclip' icon. We had only ever used the 'Paperclip'. Dragged an image from the Photo Browser and both Message Size report & Image Size menu button appeared. Then went back and tried Desktop, Finder & 'Paperclip'. Now, the two items appear, whichever method is used. Doesn't work on all .jpg images, but is sufficient for the need.
Guaranteed that if original question wasn't submitted, never would have found out how it works. Many thanks to Apple Discussions.
Gallery Info

Similar Messages

What do I do to resolve an ongoing problem with the MAIL "new messages sound".? If I reboot the iMAC and keep the mail app open after a number of messages come in the NEW MESSAGE Sound quits. I have to reboot the machine to get it back.

New Messages sound quits after several messages have arrived. I've tried several passes at resolving but nothing I have done seems to work. Sometimes I have to reboot the imac several times to get the New Messages Sounds back. Everything else works. The only thing I haven't done is reinstall the OS and that seems foolhardy.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

Command to open a PDF generated Oracle Report in New browser window

I know this is probably something for the Oracle Forums but I'll ask anyway because I can't find any info out there on this, without some extra work.
I am generating a PDF file from 10g Oracle reports on Linux RHEL 5 and storing the PDF file to the server. I can send that PDF file directly to a printer with the "lpr" command and that part works fine.
What I'm wanting to do now is "View" the PDF from within the server in a new window. We are using RHEL 5 (Linux) platform and I'm trying to see if there is a way to open the file with a "command line" command that will open it in a new browser window or new window period (opening it with Adobe Acrobat).
Does anyone have a command that will do this? Otherwise, how has everyone else been handling this. The idea of just viewing the previously generated PDF Report file will save us overhead on our database servers because they won't have to re-run some of the same reports over and over.
Any help and assistance is appreciated.
Chris

Several options:
- If you only want to show the pdf to the client without printing, use destype=cache and use WEB.SHOW_DOCUMENT after the RUN_REPORT_OBJECT (for examples search the forms-forum, there are lots)
-If you have to generate the pdf to a file to get it printed, you could
+use WEBUTIL_FILETRANSFER.AS_TO_CLIENT after the printing to transfer the file to the client, then use CLIENT_HOST to view it.
+map the appserver-directory you generate the report to as a virtual directory in the application-server then use WEB.SHOW_DOCUMENT to directly access the generated file via url.

Calling web report in new browser window

I have one Web-based Oracle report where I am calling another report in a FormatTrigger as:
http://myserver/cgi-bin/rwcgi60.exe?key1+:param1
I want to run this second report in a new browser window. I tried using TARGET="_blank"
but I get syntax errors. I know that without the cgi parameters, it is easy to include the TARGET after the URL. But can anyone tell me the correct syntax for the above case (with parameters)? I tried putting the TARGET before '?' and after the param but both failed.
Thanks
null

try this in your format trigger:
web.show_document('http://myserver/cgi-bin/rwcgi60.exe?param1=value+param2=value', '_blank');

Display Integrated Oracle Report in New Browser Window

Hi All,
I am using APEX 3.0.1 and Reports Builder 10g and have integrated my Oracle Reports (.rdf) successfully with APEX.
The trouble is that the report output (in PDF format) is opening in the same browser window as my APEX application and I would like to spawn a new browser window to display the report output.
The report is being called from a button with a Target of URL and the URL Target is:
&REPORTS_URL.&module=DEBITNOTE_REP.rdf&destype=cache&desformat=pdf&P_DEBITNOTEID=&P73_DEBITNOTEID.
Kind Regards,
Gary.

Hi Garry,
Had to do the same thing last week.
1. Create a javascript function that accepts the report parameters and calls the window.open function for the reports URL
2. Change the URL on the report button to call this new function
It might also be worth using a cmdfile (see reports doco) to simplify the URL
cheers,
Ron

Call selected report in new External window

Hi ,
I have a dropdown with 10 reports. say exaploe Report1, Report2......etc
Now when i selct a Report1 from the drop down and click on PintReport button , I would like call a new External Window. This exteral window should display the data in a table from executed related reportRFC1.
Please can you give some advice what is the best approach to achieve this.
Thanks
Krish

Hi,
if you have the output of your reports as HTML, you can easily use this:
html = htmlheader + htmlBody + htmlfooter;
final IWDCachedWebResource resource = WDWebResource.getPublicCachedWebResource(html.getBytes("UTF-8"), WDWebResourceType.HTML, WDScopeType.APPLICATION_SCOPE, wdComponentAPI.getDeployableObjectPart(), "Title");
resource.setResourceName("HTML_inline.html");
resource.setAttachment(false);
resource.setReadOnce(false);
resource.setMakeCopy(true);
IWDWindow window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(resource.getAbsoluteURL(), "New Window Name");
window.show();
Maybe you can use wdComponentAPI.getWindowManager().createNonModalExternalWindow(resource.getAbsoluteURL(), "New Window Name"); In an other way. It's a method, that opens a new Browser Window.
Best regards,
Christian

Turning off new message indicator AND the new message count

Greetings,
Is it possible to turn off both the new message indicator (red asterix) and the new message count?
I would like no message indicators to appear on my blackberry home screen.
Thanks ever so much for your help.

I guess I didn't read close enough. I don't think you can turn off the red asterisk. It's going to show up on the icon no matter what.
As for the text messages, I'm not sure the setting for not showing message count indicator applies for text messges. In fact, if you have OS 5, it most likely doesn't as sms is handled much differently.
You can turn off sounds and the red led in Profiles (or Sounds in OS 5)
You're basically wanting to disabl everything the phone was designed to do.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Stopping the message ping sound on new messages

Is their a way to stop the ping sound associated with the receipt of new messages, either SMS Texts, Emails, etc. on my 8310 Curve using 4.5 software
Thanks,
Howard
[email protected]
Solved!
Go to Solution.

Go to Profiles. Scroll down to Advanced. Select profile to edit and edit in/out of holster settings. If you want no sound select none under that item (i.e. SMS, MMS, Phone, Cal, etc.)

Drop Down Menu - 3rd Level iView open in new external Window with parameter

Hello Community,
we have the following problem: We have created some drop down menu for the portal navigation. Some iViews we are going to open in new Window. Therefore the iViews are getting some parameters like: menubar=no, toolbar=no, resizable=yes, status yes....and so one....And also the iView has fixed height and width.
Now when we are going to open the iview in the second level position, everything is working fine and the window functions are also used.
When we change the position of the iview from an second level position to an third level position, and we want to open the iview from the drop down menu, the window functions and the size is not used.
Can some one help? I have attached the JSP Code:

[JSP File|http://www.megaupload.com/?d=R7YLTTKX]

Image item to open a page in a new pop window

Hi,
How can I have an image to open a page in a popup window. As I can define an item as a link and define Destination URI and Target Frame as _blank. But I need to show an image that when clicked should open the Destionation URI in a popup blank page. How can I achieve this functionality. Currently I have used an item as image but it opens the page in the same window as I need to open it in a new window.
Thanks

try this..
javascript:var a=window.open('http://www.oracle.com', 'a','height=500,width=900,status=yes,toolbar=no,menubar=no,location=no'); a.focus();
--Prasanna

Message Split - single receiver- New Message ID

Hi,
I am trying a message split to a single receiver. But I want to have multiple line items in sxmb_moni with different Message IDs. So that if there is a failure of the message, through the triggered alert, I would be able to submit that single message.
P.S: I am trying to avoid BPM.
reg

Hi,
If you are avoiding BPM..then it means Splitting fill take place in Adapter Engine( for correspnding adapters).
So if message fails in AE that it is possible to restart/resubmit that failed message (splittted message).
Thanks
Farooq

Scrolling through message thread while typing new message....

Prior to iOS7 when I typed a long text I could press edit while typing to scroll up to see the previous message. Now once I've filled the screen I can't find anyway to go back and look at the previous message until I've pressed send... I type a lot of long messages and it's annoying to not be able to see what I'm replying too..... Anyone know how to do this ? Thanks....

I thought so too but apparently you can read them. You just swipe the tiny bar above the message you're typing down (underneath the name of the person you're texting with) and you can re-read your messages

I use icloud email but (2 email accounts univ and icloud) and i need to have all my outgoing emails come "from" my university account, not my icloud. So how do i do that, note checking the default box for sending new messages only applies to new messages

I am using icloud email but i also have a university account. All my email is fowarded to my icloud account and what i need to do is make sure all of my email that i ship is from my university account and not from my icloud account. I know there is a box that allows the default for all new emails to originate from one account but how do i make sure that all my replies to email (i.e. they have been fowarded from university account to icloud) now go from my university account. please help anyone.

Sorry for the delayed response, yes i want to use my university account when replying to all emails. Note i just discovered something, when i forward my university email to my icloud account and than responded from either my imac of my macbook air (i.e. in icloud) it automatically goes to my university account in the "from" space (good news!!!). That is just what i wanted, . While that is the good news, the bad news is that my iphone and ipad still treat this email as being from icloud even though it is forwarded (redirected) from my university account. That is when i respond to an email (or for that matter create a new email in my icloud account) it automatically lists the icloud account as the "from" account and i have to go in and manually modify it. So i am 50% there to solving my problem (i.e. actually did nothing the systems just worked well) but i still need to figure out a way to make this happen on my ipad and iphone. Any help or suggestions, note the default button in the iphone and ipad for email work differently than the default in the composition menu of the imac or macair.

Image Resize Menu not available

According to Mail Help, when I insert an image into an email, there is supposed to be an image resize menu in the lower right portion of the window and a message size indicator in the lower left of the window. Neither of these are appearing for me. I have tried attaching an image in a number of different ways with the "insert attachment at end of message" both on and off. Any ideas out there?

I've got the same problem. It only occurred after upgrading to Leopard.
Before it worked fine. (Leopard is for me not a success on this moment: my pages just stopped working, can't connect via bleutooth to my phone anymore using addressbook, eyeTV also stops at random and restarts are occurring often. I'm starting to get that 'trow this stupid thing out the window' feeling i had during my MS windows era.

No Image Size menu or Message Size report in New Message window

Similar Messages

Maybe you are looking for