No indication of microphone existance in the mixer panel...where it used to be

I relocated the computer and had to disconnect everything.
Upon reconnection, the internal sound card works, but the external box (to which is where I plug in my microphone) does not light up.
Surround mixer: no microphone existance or available adjustment is indicated where as before there was.
I have very rarely touched this box... there has been no abuse of any kind... I'm inclined to think that it is a hardware connection problem...and they don't even sell this model any more.
I use it for mostly singing and recording and at the time...this was the only sound card with xlr connection that I could find.
I've only had it for about a year but pass the waranty period, unfortunately.
Can anyone PLEASE help or enlighten what I could have done wrong?
Thank you!

you have made a valuable point that I've overlooked !!!!
!!! I think this may cure the problem !
!!! I will try this right away...although...from the sound card...where should i connect the other end?I thought it should go to the cd player and the new pc's would not require that...right?Please advise...and thanks a million... Peggy

Similar Messages

  • How do you reset the faders in the mixer panel in PPro CC

    how do you reset the faders in the mixer panel in PPro CC? I want to reset my channel faders and start my mix fresh but can find no way to reset them

    Dble Click / or right Click on the slider knob or the O
    One of those I think from memory.
    Correct.

  • HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

    Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

    Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

  • How to make a photo STAY in the assets panel for future use for In browser editing?

    How to make a photo STAY in the assets panel for future use for In browser editing?
    When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
    When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

    Sure ... right mouse click on  your page and choose 'Exclude Page from Menus' :-)

  • How do i get to the advanced panel in firefox using a mac

    How do I access the advanced panel in tools using firefox. There is no tools icon on the home page.
    Thanks

    You have Tools and Settings in the Firefox Android.
    To check that click menu/center button to view the list.
    To block popup menus, make use of this Addon
    *https://addons.mozilla.org/en-US/android/addon/adblock-plus/?src=hp-dl-mostpopular
    For more Addons for firefox Android
    *https://addons.mozilla.org/en-US/android/

  • With the left panel, trying to use the Presets, in the tutorial to the left of the commands there are square icons, for example "Lightroom B

    With the left panel, trying to use the Presets, in the tutorial to the left of the commands there are square icons, for example “Lightroom B & W Presets”. On my program they are arrowheads pointing to the right. When I click on any Preset, it does not work.
    Also, Right Panel, Color, White Balance, “As Shot” only has 2 options (auto & custom) vs. tutorial that has 9 options.

    You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

  • CS5 Panels acting bizarrely - unable rearrange the dock panels and cannot use the drop down menus

    The panels are not functioning properly in my new version of CS5.  Several things are wrong:
    I cannot click a panel tab and move it.  When I click on a panel, nothing happens.  I tried moving the swatch panel to the bottom of the dock and I got nothing.  I tried Command Click and I was able to move the swatch panel off the dock, but when i tried to re-dock it at the bottom of the panels, it would not dock in.
    Also, when I try click on the menus in the panels in the dock, nothing happens.  I have to click multiple times....and then the drop down menu just appears for a milisecond and then disappears....so I am not able to select anything.
    Oh...and I am working in 32 bit.
    Anyone have a clue what to do?

    Sounds like your problem is solved.
    If you look at Alien skin's website regarding CS5 (http://support.alienskin.com/Article_BB9D5.aspx), then you'll see that they state that their plug-ins are CS5 compatible, so maybe you have an old version, or maybe you want to let them know about this issue.

  • I'm working on AE tutorial 5.5 chapter 9. It instructs me to use the 'fill" button, problem is it's not located on the Tools panel. where can I find the "fill" button?

    I'm working on AE version 5.5 tutorial; the instructions in chapter 9 tell me to use the "fill" button located in the tools panel. problem is, it's not in the Tools panel. Any idea where to find the "fill" button?

    why a duck wrote:
    AE CS 5. the version of software is 5.5
    When you hit Help>About, what version number does it say?
    Could you show an image of the tutorial or link to it so we can see more clearly what it's asking you to do?

  • There are 13GB "other" data that I cannot account for that simply did not exist before the update. Where is it coming from and how can I get rid of it?

    After the update, 13GB of "other" data mysteriously shows up on my phone when it tries to sync; It's literally more than half the available space on my phone. I've deleted SEVERAL apps (including the apps it tried to sync from my iPad), I've removed most of my music and videos.
    I can account for the rest of the data on the phone EXCEPT for the 13GB of "other".
    Is anyone else experiencing this?

    Yes, I have the same 13 GB "other" after updating from IOS 4 to IOS 5.
    I posted the follow-up question, which is:
    What can I do about this? Can I clear it without doing a restore?
    If I do a restore, can I then re-install my apps and music from my iMac?

  • Does the iPhone 5 unlocked exists in the US? Where can I find one?

    I want to now if there is unlocked iPhone five to buy in USA. Can I buy one using the apple store on the internet?

    The unlocked iPhone 5 is available in the US.
    http://store.apple.com/us/search?find=unlocked%20iPhone%205%20pricing

  • PDF files have suddenly started downloading to the temp folder instead of the download folder where they used to be-- the downloads folder is marked correctly

    all downloads are set to go to downloads file-- PDFs have quit going there and are in temp folder instead-- all other downloads are still going to the right place

    Deleting the '''mimeTypes.rdf''' will reset all download actions to the default settings.
    Type '''about:support''' in the address bar and press enter.
    Under the page logo on the left side you will see '''Application Basics.'''
    Under this find '''Profile Folder.''' To it’s right press the button
    '''Show Folder.''' This will open your file browser to the current
    Firefox profile. Now '''Close Firefox.'''
    Locate the file. Then rename or delete it. Restart Firefox.

  • How to check if a user exists in the system ?

    Dear Gurus,
    I want to check whether a user ID exists in the system after logon by using VBA. If the user ID exists, then I will update the user's information with external data by using the method user.change.
    When running below codes, error occurs and error msg is: "The persistent key for an business object instance of type USER has not been set. Cannot invoke method EXISTENCECHECK"
    How can I do to check the user ID existence ?
    Set oUser = oBAPICtrl.GetSapObject("user")
    oUser.ExistenceCheck "MyUserID", return:=oReturn
    Thanks and Regards,
    Bao Yan

    Mickey,
    I'm afraid I never did get this to work properly. However, in the way of all bad/good (delete as appropriate) programmers eveywhere I worked around this problem. I was using this code in Banner.asp to change the view based on the user group so if a given session variable was set a user would see a different view. It works fine with no slow down on the page and you should be able to adapt it to what you need.
    Hope this helps.
    Neville
    Note: Application variables are ones I have defined in config.xml.
    Code follows:
    <!--START:INC\common\getgroup.asp-->
    <% 'NAH 29/03/2004 ' 'This check the to see if the current user has the group in their membership that has been defined as the group to provide an alternative view of the portal.' 'The group variable is defined in the config.xml as "ALTVIEWGROUP"'
    'Do not do this is we have already matched the group'If Session("groupMatch") <> "1" and Session("groupMatch") <> "2" then
    Dim pGroup
    pGroup = Application("ALTVIEWGROUP") Set Session("groupMatch") = nothing
    Dim Plumtree
    Set Plumtree = Server.CreateObject("ADODB.Recordset") Plumtree.ActiveConnection = "Driver={SQL Server};Server=" & Application("DBSERVER") & ";Database=" & Application("PLUMTREEDB") & ";" Plumtree.Source = "SELECT GROUPID FROM " & Application("PLUMTREEDBUSER") & ".PTGROUPMEMBERSHIP WHERE (USERID = " & strUserID & ") AND (GROUPID = " & pGroup & ")" Plumtree.CursorType = 3 Plumtree.CursorLocation = 2 Plumtree.LockType = 1 Plumtree.Open()
    'If there are records we should have a match otherwise set the session varible to no match.' If Plumtree.EOF then Session("groupMatch") = "2" Else 'By getting here the user should have the matching group but complete one final check to make sure' If cInt(Plumtree.Fields.Item("GROUPID").Value) = cInt(pGroup) then Session("groupMatch") = "1" Else Session("groupMatch") = "2" End If
    End If
    Plumtree.Close() Set Plumtree = Nothing
    End if%><!--END:INC\common\getgroup.asp-->

  • Field BSEG-MEINS. does not exist in the screen SAPMF05A 0300

    Dear Expert,
    in cross-company sales process, issuing an IDoc to create a FI AP document, the IDoc was created and issued successfully by inter-compnay invoice, but in processing the IDoc to creat a FI AP document, there is a error message and that is "Field BSEG-MEINS. does not exist in the screen SAPMF05A 0300". i used the Units of Measurement"EA", and in the setting of Units of Measurement"EA" i already flagged the Units of Measurement"EA" as Primay code, but the error still appear again, please give me some useful advice!

    Hi
    Concerning message of "Fields BSEG-MEINS and MENGE are hidden in
    SAPMF05A 0300", it was recommended to check which G/L accounts were
    involved and to verify that fields BSEG-MEINS and MENGE were set to
    'optional' .Please check the field statuses in OB41/OB14 for the
    affected G/L accounts, whether the field as optional is set.
    regards,
    Ramana

  • Method Implementation does not exist in the SWO1.

    Hi,
    If the definition of the method in the business object does not exist in the Business Object, where all the places the system will try to find & execute the code. For ex: we have a method(custom method) in the YBUSXXXX business object. But when we double click the method , we get the screen where we have 3 tabs, General/Result Type/ABAP tabs. In the ABAP tab, the radio button 'Other' was selected. I did not find the code for this method. If the code does not fins here, where system will find dynamically & excute that code. & how can I see that code? Pls help.
    Thanks,
    Pandu
    Moderator message : Duplicate post locked.
    Edited by: Vinod Kumar on Oct 5, 2011 9:43 AM

    See the below link
    The work book does not exist in the document store
    Regs
    Gopi
    Assign points if it is useful

  • FaceTime does not exist in the settings

    I have an Iphone 4G 16GB with IOS 6 ..
    Model: MC603AE
    I live in the Kingdom of Bahrain, where I deal with BATELCO Telecom (Bahrain) and the FACETIME does not exist in the setting ..
    Where if use another telecommunications company like (VIVA Telecom - BAhrain), the FACETIME come exist in the settings and can be used ..
    I do not know what is the reason ..
    I worked restor several times and now Updated my device to the latest frimware ..
    I hope that you will find a solution to this problem ..
    Thanks
    My Best Regard

    Settings>General>About
    What do you see for Model?
    ~Lyssa

Maybe you are looking for

  • AirPort recognized but no pop-up window for remote speakers in iTunes

    I have connected an Airport Express to an existing wireless network of multiple windows (2000 and XP) computers via a Linksys router. The base station is properly recognized (solid green LED, unit correctly identified in admin utility, and I was able

  • ICal All Day Events

    Hi, Im experiencing problems viewing my month view, i run my business which is holiday lets, off my ICal. I mainly use my month view because i can see availability and communicate this to clients when the call up to book/check availability. My proble

  • TV out full function

    Hi, I am tring to use iphone 4 to have movie output to LCDTV. But it only supports 640x480 on ipod app. If I use some apps like Oplayer, it supports to HD movie on iphone but not TVout. I know jailbreak iphone can use "resupported" to free the tvout

  • Content Activation Problem

    Hi, I have a problem in activation business content for some BI infoobjects. We have upgraded from BI 3.5 to 7.0. But some of the objects are not activated. So i was trying to reactivate them and following are my concerns. If i consider revised versi

  • Deleting multiple emails - no notifiaction if only Hub or Hub + Server

    Dear all, on the Q10 when you delete onyl one email it asks if you like to delte it only in the HUB or in HUB + Server. When you mark several emails to delete them at once, this box is not displayed. Hope this will be improved with the next update?!