No input signal after creating a new track in logic 9

i am working on a song and have 14 audio track used and 5 midi . i try to create a new audio track but i have no input signal ,only the output is working.i did a upgrade recently but i am not sure if that is the problem.can someone help?
ps: i have no input if i record or if i playback,but it does record and i can adjust the volume ,just no signal

have you selected the proper input on the channel strip that matches the one your instrument or mic is plugged in to?

Similar Messages

  • When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select.  Anyone else noticing this?

    When I create a new track for Guitar it labels the track "Clean Combo" no matter which amp I select.  Anyone else noticing this?

    Look at it this way: there is no need to record that effect onto the audiofile. This is a great advantage of modern recording, and this is how most DAW's work by default. Just leave the plugin on when playing back.
    Only for CPU management reasons it may be advantageous in certain situations to either freeze a track or bounce it in place (both techniques will render an audiofile that may include the effect). But in general it is a (very) good thing that it is possible to tweak any effect after recording, and have a clean, unprocessed recorded signal to work with. And if the effect was perfect at the time of recording, well, just leave the plugin(s) engaged.
    http://help.apple.com/logicpro/mac/10.1/#/lgcp8ae5826e
    http://help.apple.com/logicpro/mac/10.1/#/lgcpf1cbfd51
    ps: there is a way to record plugin effected signal live into the audiofile, but it involves creating a custom environment setup.

  • Glitch?  track creating a new track...

    ok, so lets say I have 3 tracks... and in my window, you can see both "tracks"' and "mixer"(with volume/pan/level)
    when I push the big "+" to add a new track, it "collapses my tracks" ( as if I am pushcin the little arrow at the top right by "tracks") - now the mixer is no longer visible for each track...
    so then, I push the arrow again, and each of the tracks fall down into their place, as they should, but only like part of the gray box for each track (like where it says new track) is visible... I have to roll my mouse over the box for the rest of it to show up.. does that make sense.. it seems like some sort of graphic glitch- it is the latest version of GB.. I don't get it... on top of all this, my mixers have dissapeared again too, so I have to push the arrow again..
    in short, every time I create a new track, I have to click the arrow, then roll my mouse over the gray boxes for me to able to see them, then click the arrow again so the mixer pops back out.. its strange..
    I am new to GB, but want to know if this has happened to others, or if anyone knows how to fix it.. its annoying!
    thanks
    in short, after I

    I really appreciate that. I went through every setting I could think of and didn't "check" or uncheck the obvious.  Lifesaver.

  • Problem in creating a new track

    Hi,
    I am trying to create a new track in NWDi like this
    1.created a product,sofware unit and software component and defined the dependencies(required components like BUILDT,JTECHS etc)
    2.Went to landscape configurator and clicked on track data and enter the track name and add the sc created .
    3.After adding the sc created required components came automatically in the track data screen.
    4.i saved the track data then it says track is created
    5.I went to NWDS and trying to import that track.
    6.i can see all the components in that track but inside each component like BUILDT i dont see any sda files(external libraries or jar files) they are just empty.
    Did i miss any step here in creating the track
    please help me in resolving this issue
    Bala

    I followed the same steps as mentioned below
    1. you are running JDI on SPS12
    2. you have defined your software component "mycomp" at the SLD
    3. you have declared the three SCs BUILDT, JTECHS, JEE as
    dependent SCs for "mycomp" at the SLD
    4. after these you did an "update CMS" at the "domain data" configuration
    5. you created your track and choose for your SCs "mycomp" as software component.
    and now:
    6. When i added the developed component it brought all the required (JTECHS,BUILDT,JEE)components in the Landscape configurator. You already defined the usage of these SCs
    in the SLD at step 3.
    In older Versions of the JDI (e.g. SPS10) you saw after the choice
    of "mycomp" inside the track data also the dependent SCs. This is
    not the case any more in SPS13.
    Summary: only define your dependent SCs at the SLD, update CMS,
    remove the definition from you track directly and try again.
    But the problem is when i go to Transport Studio and checked in in check-in tab and after went to development tab and imported and after sometime it is saying import failed.And when i go to NWDS it is bringing all the scs in my trck but there are no libraries in my scs
    I did observe a problem in CBS for this new track
    when i go to CBS and select my track and look for DCs in JTECHS,JEE,BUILDT scs there are no DCS(0 dcs).
    I think if i can resolve this i can create a new track without any problems
    Please help me in resolving this issue

  • Problem while creating a new track

    Hi,
    When we create a new track, we get the following exception:
    Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: com.tssap.dtr.client.lib.cms.DTR.connect(Ljava/lang/String;Lcom/tssap/dtr/client/lib/protocol/ISessionContext;)V
    We have created a new product and a software component and defined the dependencies for the software component (SAP_BUILDT, SAP_JTECHS & SAP-JEE).  In the CMS, we have done Update CMS.  We are able to see the software component and have added the same in the 'Software Components for Development'.  All the usage dependencies are clearly visible.
    When we save the track, we get the above exception.  Can any one of you please respond this query?
    Thanks in advance.
    Regards,
    Ravi

    Hi Ravi,
    We enocounted a similar problem once.  For our situation it was a missing DTR url in the lanscape configurator.  To check/fix this do the following:
    1) login to CMS
    2) click on the Landscape Configurator link
    3) if not already selected, choose the track in the list of tracks on the left
    4) click on the Track Data tab for the selected track
    5) verify that the Design Time Repository URL is specified and correct (e.g. http://<server>:<port>/dtr
    Save the configuration.
    Hope this helps.

  • HT4942 After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

    After Creating a new document or editing an old document in Pages on my iPad I no longer see the changes in Pages on my iPhone. iCloud services are on with both devices.

    Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
    I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
    The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
    I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

  • How to create a new track with existing changes in the production

    Hi
    I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
    points rewarded for helpful answers
    Thanks
    Sheril

    Param
    Have you done the import in DEV and CONS  and then Assembled .. ?
    If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox  and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
    If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
    Thanks
    Rahul

  • Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    Mac OSX, 10.7.5, LR 5.6  After creating a new folder in the Destination section and importing images, the new folder name appears as 2010, no matter what name I give it.  Why is it doing this?

    I am experiencing Mavericks failing to copy subdirectories from usb sticks, I am backing up game saves from a console. Both sticks I use are fine, same permissions of course since the console wrote the files. Sometimes it copies, sometimes it doesn't. It seems to be related to the mounting process.
    Thank God Apple hasn't (yet) broken bash.

  • After creating a new slideshow I export it with the  setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not  as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

    After creating a new slideshow I export it with the  setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not  as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

    DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good.  You should probably create your .mov in DV format to best match the DVD format

  • After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

    After creating a new playlist in iTunes, how can I add my entire music library --at once-- to the new playlist. I want to download all my music from Icloud at once on my Macpro

    You have two separate questions here...
    To get all your music into one playlist, select Music in the sidebar and click the Songs view at the top. Then, highlight all the songs and drag them into your playlist.
    I don't know if it's possible to download all Purchased content (or do you mean iTunes Match content?) at once; try a few Google searches.

  • Any event which is raised when we save Purchase order after creating a new?

    Hi
    I need to know any event which is raised whenever we save a purchase order after creating a new one. I know event 'change' of object type BUS2012 is raised whenever we change a PO. Please help in this regard.
    Regards
    Swetabh

    Create event doesnt exist in BUS2012.check if custom business object exists for this by using 'where used list',probably it may have created event.

  • I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as tambourine? its really annoying

    I'm trying to multi-track using an m-audio device, I can record my guitar fine. However, I want to create a new track so I can record an acoustic tambourine over the top. Instead it records the original guitar as well as the tambourine coming out with a really distorted sound. I've managed to record over the top of a guitar before and add diferent riffs and sounds but I've tried all of the settings but its still not working. Basically I want to record different tracks without it recording my previous guitar riffs as well. Help would really be appreciated.

    Ah that was it, thanks a lot common sense really but thanks for the help

  • CMSUnexpectedException when I create a new track or copy.

    Hi,
    When I create a new track or copy track CMS'll retrun an error
    Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR)
    I restart JDI but it still error.
    What should I do?
    Regards,
    Khempat

    I find a answer in topic ht[CMS SCA imports fail & CBS error while activating|CMS SCA imports fail & CBS error while activating]
    tx for ur care

  • Can't create a new project in Logic pro . Goes straight to a midi file. Do I shut something down before trying to create a new project

    Can't create a new project in Logic pro . Goes straight to a midi file. Do I shut something down before trying to create a new project?

    When you open Logic, close the project that its automatically brought up (see CCT's answer above, which explains how you can change that behaviour, if you like - I usually want to listen to the last thing I was doing, but its your choice - and then File>New.
    So, yeah, you do have to close the currently loaded project first.

  • HT3659 My Soundtrack pro looses the mic on AJAKona.  It will appear as an input only after clicking on New audio file, then ok, Recording alert appears and then I have my AJA KONA3g back as an input option. loose it again if I change track

    My Soundtrack pro looses the mic on AJAKona.  It will appear as an input only by clicking on New audio file, then ok,  and an Recording alert comes up.  But if I change track I loose the AJA again. How do I fix this?

    Finally found the answer. The recording was done at 48, the audio/MIDI settings were set to 48, but the sampling setting on the export was not, causing everything else to break down. Once all three matched the export worked and the playback audio worked without opening the clip editing screen.

Maybe you are looking for