No Inspection Lot required for Skipped Lot

Hi Experts,
I have used DMR to skip 10 lots from a particular vendor and inspect the 11th lot. But the client's requirement is even inspection lot should not be generated for the skipped lots.
Also, if the material is procured from some other vendor, then the inspection lot should be generated everytime.
How can I map this?
Please advise.
Regards,
Rahul

The only alternative I can think of would be to use a development. Set up the inspections to happen . No DMR. You then would use a user exit, (I believe QAAT002, maybe QAAT001 would work). One of those allow you to set a flag in the user exit that supreses the creation of the inspectoin lot.
You would have to have the user exit look up the GR's for the vendor/material/plant combination since the last inspection lot for this combination. Then if the count is equal or greater than ten, you create the lot. If less then 10, you suppress the creation of the lot.
I would be careful how you code the user exit. You'll probably only want this to apply to certain materials so you have to come up with a way that allows flexibability in what materials this is used for. I might suggest using the QMin procuremnet control key. If you have no procurement functions, you usually define a control key 0000 for this . Copy that to 1001 for instance. It will have no functions. But your user exit would only run if the control key was 1001. It would immediately exit for any other control key in use. You might need additional control keys if you do use other features of the conrtol key such as COA receipt. In that case you might have two control keys that trigger your user exit. 1001 and 1002. 1002 would require a cert.
I hope this is clear.
FF
Edited by: FireFighter on Sep 22, 2011 2:50 PM

Similar Messages

No Auto UD for SKIP lot

Hello Guys,
I am getting this error when we background job tries to do AUTO UD
"Error during quantity posting for inspection lot 000000314850, manual proc. required"
Thanks!
Owais

>
Owais Ahmed wrote:
> What is the status of Quality level?
> REL
> It also ahs "lot is not inpspected (skip lot)
>
> Have you maintained DMR at lot level in inspection plan? what is the setting of DMR?
> We maintain DMR rule at characteristic level.
Hay Dude!!!
If you want to do "AUTO UD" of insp lot then in inspection plan you should maintain DMR at lot level in header not at char. level.
After that you have to maintain DMR in insp plan header.
To do auto UD quality level next stage should be "SKIP", if it is not inspected or inspect then you have to do inspection & UD manually for first lot then from 2nd lot system will do auto UD.
If still you are getting problem, then let us know what data you have entered in DMR....
Hope this helps.
Thanks!!!

DMR - stock posting for skip lot

hi experts,
i am creating a DMR for raw material GR gainst PO.
I am creating DMR at lot level. i will inspect first batch an skip next 5 batches.
after executing i am getting 6 inpsection lots with first as normal inspection lot and next 5 in skip status.
now the query is in one system after GR of PO i am getting the skip lot stock in quality and in other system (other client) .
i am getting the skip lot stock directly in unrestricted use. both have inspection lots status REL SKIP.
dmr RULE is same , material master inspection type settings are same.
what is standard SAP function shud the stock go to quality or untrestristed for skip lot ?
what might be reason for this different behaviour ? any function module or user exit is used?
anything i need to look in config.?
Thanks
satish

Bit late but maybe other people find this a helpful answer.....
Check the inspection lot control settings in the material master.
If option For each material document item is chosen, the skiplot goes to unrestricted stock.
If option For each material document, batch and storage location is chosen, the skiplot goes to quality stock.
BR,
Arno

Inspection time Capacity Updation in work center for skipped lots

Hi Guys,
             I am using in process inspection type 03 along with DMR criteria at lot level i have defined the DMR rule and assigned it in routing header.DMR rule is inspection lot 1 in 5 will be inspected i.e when the inspection lot will be created and if there is no quality level exists it will first create the quality level with 1st inspection lot which will not be skipped lot and then it will skip next 4 lots and 5th will be inspected again.Quality level is updated during lot creation level.
             what i am looking is when you have the skip inspection lot he capacity which has been planned for inspection for that work center should not be considered since there is no inspection done because of skipped inspection on that work center although it's the part of Routing/production process.
please let me know if any more inputs required.
your inputs/feedback is really appreciated
Regards
Ashutosh Shende

Hi Krishna,
It is distributing unevenly because of the Int. Dist. key maintained for "Labour" capacity category.
Following are the available dist keys.
I think for your scenario, you should select SAP020
SAP000     Overall load for latest start date
SAP010     Overall load for earliest start date
SAP020     Equal distrib. earliest dates, fact.cal.
SAP030     Equal distrib. latest dates, fact. cal.
SAP040     Equal distrib. latest dates, discrete
SAP050     Equal distrib. earliest dates, oper.time
SAP060     Equal distr. latest dates, operat. time
SAP070     Overall load at latest finish date
Please let me know if this works for you.
Regards,
Abhay Kapase

DMR configuration for skip lot inspection

Hi QM experts,
My client needs to configure DMR for skip inspection lot.
Scenario Requires following steps:
1.     Maintain PPAP approved status
2.     After PPAP approval inspection of next 10 consecutive lots.
3.     If all lots OK, system skip 1 in 2 lots.
4.     Then system again checks next 6 consecutive lots, if there is any rejection again repeat step 2 else skip 1 in 3 lots.
5.     Same cycle will repeat for skip 1 in 5, then skip 1 in 10, skip 1 in 20 and so onu2026
I am new to PPAP status and DMR. Kindly guide how to map this in SAP. What are the SPRO settings required and what master data to maintain for it, and what will be the process flow.
Regards,

in need of experts Advice and Guidance.
Regards,

R12 PO Inspection vs. Quality Skip Lot

We have been performing PO inspections without the Quality module for over 10 years. There is project to move many of our key suppliers to an Evaluated Receipt Settlement program. The accounting folks want to throw these suppliers into some sort of Skip Lot process. However it appears that to go in this direction all Inspection Required receipts will now have to have a Quality Plan associated to it. Is this true? Is there anyway to commingle the two inspection methods?
Thanks in advance!

Hi Rahul
You may need to set following to meet your need,
1. In Quality Collection Plan Set Item Inspection required - for a Particular Supplier or Supplier + Site
this will invoke Quality plan only if above conditions meet and hence it will feed this to skiplot engine.
Skiplot engine is designed with skipping lot, irrespective of mode of receiving materials.
Hope this helps.
Any questions let me know
Cheers
Kamal
0044-7533787829

Material Requirement for the Lot Based Job

Hi,
I'm creating an Lot based Job through the request 'Import Lot Based Jobs' . I need to insert values into the table Wip_Requirement_Operations. That is the Lot Based Job form -> Press button component - > Material Requirement Form
I would like to know whether there is any interface available for loading the value into this table.
Can anyone help me in this ?
Thanks
GM

Oracle Manufacturing APIs guide is not clear on this subject.
Lot based job are loaded through interface WSM_LOT_JOB_ INTERFACE and one option is ALLOW_EXPLOSION which tells if the BOM used is the standard one or if you provide a custom BOM . In this case, the user guide does not provide you any method.
(it tells : ALLOW_EXPLOSION: determines whether the system uses the standard bill of
material (BOM) and routing or a custom BOM and routing that you supply. If
this flag is set to N or n, you must manually provide a custom BOM )
=> You should ask Orcle how the custom BOM should be provided to the Lot based job interface.
I do not know if this is the same as for discrete jobs:
For discrete jobs, such data are loaded through interface table WIP_JOB_DTLS_INTERFACE.
Maybe once you have created your job, you can use this WIP_JOB_DTLS_INTERFACE to load component requirements ?

Recurring Inspection is required for non batch managed material

Hi Gurus,
My scenerio is I want recurring inspection of material but my material is not batch managed. is there any way around to cater this requirement?
Regards

Without Batch management the reccuring inspection is not possible because if you receive 100 quantity of material A on date X and consume 50 and again you purchase 50 on daye Y and comsume 30 out of it .. Then how the system will know about when to trigger this inspection and for how much quantity..Even you use development the system canot identify the materials got consumed .. If it is serialized material then you can do it by creating the development table and maintaining the receipt date for each serial no and the inspection date...

Using DMR for inspection how to find a lot whether it is skipped one or not

Hi,
I am using DMR for material and vendor combination using a skipping of 4 lots in a cycle of 1 to 5 lots and i want to print a document when the lot generates. I want to know whether that lot is a normal lot or an skipped lot. i want at which table and field we can get the lot as skipped one or an normal inspection lot which needs to be inspected. please suggest whether in standard SAP any document can be printed for the lot details when GR happens.
please suggest.
Regards
madan

Hi,
Use the field KZSKIPLOT from the table QALS to find whether the inspection lot has skipped nature or not.
Thanks
SUMIT

Stop Skip Lots for Receiving Inspection

Hello Experts
I have set up my DMR as skip 10 lots after one insection.
What I am looking for is to stop skip lots generation as I need to run batch job job QA17 to complete the UD for all skipped lots.
What I am looking is that each 11th receipt is inspected , without generating the skipped lots .
That way system will have less lots and I do not have to execute the batch JOB QA17.
btw in my DMR definition my selection is DYNAMIC MODIFICATION at "lot selection"
Appreciate your feedback.
Thx
Gaurav

Hi Gaurav,
As per my understanding, you want to inspect one lot and after that you want to SKIP next 10 lot inspect 1 lot & SKIP 10 lot ................. Correct??
Let me correct if my understanding is wrong.
If this is the case then do DMR following way it should definitely work in your case.
Create DMR - QDR1
Select DMR for UD (If you want to update quality level after UD)
Select DMR at lot creation (If you want to update quality level after lot creation)
Stage 10: InspServ - 4, SKIP - blank, ISt - Select check box, Short text - inspection, StC -select, No. of inspection - 1, Ma SKIP duration - blank, Next - Stage - 20, Reject - 1, Next - 20.
Stage 20: InspServ - blank, SKIP - Select, ISt - blank, Short text - SKIP, StC - select, No. of inspection - 10, Next - 10, Rejection - 1, Next - 20.
Let me know if you have any question on this.
Thanks!!!

Skip lot across multiple batches for same material

Hi,
I am looking for a way to control skip lots across multiple batches for the same material.
We need to do a quality check in production after a certain quantity produced (on a machine, for a material). My idea was to do skip lots (for GR) until we reach a threshold (say 10.000 pcs) and then do an inspection for the next GR for that material.
Any ideas how to set that up?
Thanks for any hint
Andreas

Hi mergler,
Ref to your query pls check this link Stock Posting for Skip Lots
Thanks in advance

DMR for skipping inspection lots

Hi friends,
I am new to QM. I want to create DMR for skipping four lots after one inspected lot.
Can you please tell me, configuration steps reqd.
Thanks in advance.

Tcode QDR1 > set name > at lot creation > next >
stage 10 > click on insp stage, Severity 04
stage 20 > tick on skip
stahe 30 > Severity 04
select both lines & click on stage change
stage 10
no. of insp : 1
new insp stage : 20
rej : 1
new insp stage : 10
stage 20
no. of skip : 4
new insp stage : 30
rej : 1
new insp stage : 10
stage 30
no. of insp : 1
new insp stage : 20
rej : 1
new insp stage : 10
& save
now u can apply this DMR in inspction plan
It may help you.

Inspection lot creation not required for intercompany Stock transfer order

Hi Team,
The client does not want system to create inspection lots for inter comapny STO. But for intra STO system does not create the inspection lot and thye are happy with it.
I have have flagged the indicator "QM not active' for the movement type
101 entry as below at transaction code OMJJ.
101 B(goods movement for Purchase Order) X(Stock Transport Order)
Even after flagging the above indicator, system is still creating the inspection lot at the time of GR for InterCC STO.
Are you aware any other place to control inspection lot creation for Inter company STO.
Thanks & Regards
Mangesh

The ispection types assigned to the material are given below.
Z05 Goods Return Inspection(copy of 05)
Z09 Shelf life extension Inspection(copy of 09)
Z89 Inspection for Quality Assurance(copy of 89)
Z90 Goods Receipt for Trading goods( It is a copy of 01 inspection type)
There is no inspection type 08 active in the material .
Thanks & Regards
Mangesh

DMR with skip lots & without inspection severity

Hi,
I have a requirement where my user needs the DMR at lot level where they do not need the inspection severity to be picked from DMR because the inspection plan has got different sampling procedures for respective MIC's.
Example:
Create a inspection plan with 3 MIC's for a material as shown below which is having active inspection type as 01: Inspection lot against GR
MIC
Sampling procedure
Inspection severity for sampling procedure
Temperature
SAMP1
SEV1 (for 100 lot size, sample size =5)
Length
SAMP2
SEV2 (for 100 lot size, sample size = 8)
Width
SAMP3
SEV3 (for 100 lot size, sample size = 2)
DMR at lot level is assigned to the inspection plan
DMR is defined as given below:
Stage
Insp severity
Skip
Initial
No. of OK inspections
New stage if OK
No. of not ok insp's
New stage if not OK
1
sev1
yes
2
1
2
yes
1
1
When a inspection lot is created against a GR for 100 lot quantity for this material then system will show the sample size in the results recording screen by considering the DMR inspection severity for all MIC's as shown below.
MIC
To inspect
Inspected
Result
Temperature
5
Length
5
Width
5
My requirement is system should propose me the sampling size as per the sampling procedures assigned to the MIC's in theinspection plan as shown below:
MIC
To inspect
Inspected
Result
Temperature
5
Length
8
Width
2
Lots should be skipped normally as shown in the DMR but sample size should be calculated from the sampling procedure assigned to the MIC.
Please help me out if there is any standard practice in SAP for this requirement.
Thank you.

Dear Craig,
I am concerned about the sample size calculation here.
Yes I have defined three seperate severities for those sampling procedures.
Each sampling procedure has many inspection severities assigned to it and I am defining the default inspection severity in the additional tab of sampling procedure so that where ever i use the sampling procedure automatically the default inspection severity will be considered for calculating sample sizing,
For example:
I have assigned normal, reduced, tightened and loose inspection severity to SAMP1 sampling procedure, then here I will default the inspection severity for the sampling procedure as reduced inspection. In this case where ever I use SAMP1 sampling procedure automatically reduced inspection severity will be considered for sampling sizing.
Similarly, I have assigned normal, reduced, tightened and loose inspection severity to SAMP2 sampling procedure, then here I will default the inspection severity for the sampling procedure as loose inspection. In this case where ever I use SAMP2 sampling procedure automatically loose inspection severity will be considered for sampling sizing.
The procedure which I have given above is standard practice in SAP, but here I want to assign DMR at inspection lot level.
DMR: If 1 lot is created then 3 lots should be skipped. Here inspection severity should not play any role.
Inspection severities should be picked from the sampling procedure assigned to the inspection plan and sample size should be calculated as per the default inspection severities assigned to the respective sampling procedure for an MIC.
Thank you.

Enhancement-One inspection lot for early lot and serial profile

Hi,
I have a requirement shown below.
Can anyone guide me to proceed this Enhancement from the start?
Inspection lot for production order is created at production order release, when the finished good has a serialnumber profile assigned in the materials master and the serialnumbers are captured in the handling unit assigned to the production order, the system will create another inspection lot.
Required system enhancement:
Only 1 inspection lot per production order should be generated.
NB. Without this enhancement both inspection lots created for the production order have to be closed to be able to close the production order.

Please try with sub-routine: userexit_move_field_to_lips or userexit_save_document of include: MV50AFZ1.
I guess clearing LIPS-QPLOS for specific conditions would do the trick for you..
Reward points
Regards

No Inspection Lot required for Skipped Lot

Similar Messages

Maybe you are looking for