No Inspection lot was generated PM

Hi grue
I am trying to create inspection lot. The error says no inspection lot was generated and the error is below. It looks like ABAP problem I do not understand. Please help
System-defined Include-files.                                 *
INCLUDE LSPO2TOP.      " Global Data
INCLUDE LSPO2UXX.      " Function Modules
User-defined Include-files (if necessary).                    *
INCLUDE LSPO2F...      " Subprograms
INCLUDE LSPO2O10.      " PBO-Modul 100, 300
INCLUDE LSPO2I10.      " PAI-Modul 100, 300
INCLUDE LSPO2F01
What I did; Create function location
Create equipment and assigned to FL
Create Notification attached to iw31
Create task list with one pc of material assigned to iw31 with 300 insp.point and MIC view & SAMPLING WAS MAINTAINED. I have no idea where the come from .Please help me this problem is keep coming and I posted few times but no proper answer was given
Very appreciated

Hi ,
First ensure the below config is done -->
SPRO>PM>Maintenance Order Processing -->Maintenance and service Orders -->Functions and settings for order types -->Assign inspection type to order type .. here ensure for your plant and calibration order type inspection type 14 is assigned
For the process plz follow the link (http://help.sap.com/saphelp_46c/helpdata/en/fe/67ec5c9d6f11d189b60000e829fbbd/frameset.htm) in this look into Maintenance Plan for Calibrating Instruments.
Remaining assigning correct inspection points in tasklist , creation of MIC and assigning MIC to task list operation ..
regrds
pushpa

Similar Messages

Inspection lot not generated after goods reciept?

Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal Rai

Hi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi.

Inspection Lot not generated, with MIGO 561

Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
Piyush

To load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock.

SAP QM-EWM - Inspection Lot not generated in ECC

Hi Gurus,
Need your advice with QM-EWM integration.
We are trying to generate an Inspection lot "01" in ECC while using EWM as our Warehouse.
Material is not HU managed so the trigger of IL should be via Good Receipt. If material is HU managed the inspection lot trigger is via Inbound delivery HU assignment.
The following has been done:
Material is QM active "01" not HU set up in ECC
Material is assigned to an Inspection Plan in ECC
We do not have QIE in place
SLOC used does not require HU
Below is the process.
Purchase Order is created in ECC
Inbound delivery is created in ECC and distributed in EWM
GR happens in EWM and reflects in ECC
The question now is it possible to generate an Inspection lot in ECC even if GR happens in EWM? w/o EWM the scenario is generating Inspection lots.

Hi,
"The question now is it possible to generate an Inspection lot in ECC even if GR happens in EWM? w/o EWM the scenario is generating Inspection lots."
No. You need to have the QIE to trigger the inspection lot creation in ECC.
"We do not have QIE in place"
This is the first thing you need.
Somewhere here in this space I thought is also a document describing how to set it up - but could not find it right now.
Brgds
Juergen

Automatic Inspection lot not generated for Inspection lot origin 12

Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
Regards

Hi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

SAP PM Inspection Lot not generated

Hello Gurus
when I create order IW31 and try to create inspection lot, inspect lot is not generated. Please help

dear friend,
first check in spro ,whether you assigned inspection types to calibration order type ?
second check while creating task list did you assign inspection points ( 300 for equipments and 310 functional locations) ?
third check whether you released the maintenance order r not?
system will generate inspection lot if the system status is REL.
Hope u got an idea.
Regards,
Pardhu

Inspection lot not generated via CO07

Hi QM Gurus,
Does anyone know how we can generate inspection lot via CO07 (production order without material number)?
I have done the steps below:
Customized inspection type 03 in order type PP03 (OPL8).
Created Reference Operation Sets 50000008.
Created Inspection plan for ROS 50000008 and assign IMC in the operation.
OSS note 675643
Anything I missed?
Any help would be appreciated.
Cheers,
Sun

Hi,
      I think the problem is no material will be maintained. The background is user reference operation set & CO07 to create production order without material. Generally, oritinal insp. type should be maintaind in MM02 QM Tab, then 03 insp. lot can be created while Pro Order released. But now, as no material master is maintained, so we can not trigger 03 in QM TAB, and no insp. lot will be generated.
      I made the moderation like Sun listed, but no insp. lot can be generated. What the note says,it will take the material number from the superior order, conflicts with our purpose (without material).
       So my question is:
      1) whether SAP can generate insp. lot from Pro. order without material
      2) What's the superior order mean?
      Thanks
Edited by: Margaretji on May 4, 2009 4:22 AM

No inspection lot was created

Dear all,
While doing a transfer posting with mov type 309,(material to material transfer) the stock is posted into quality stock with out creating a inspection lot. now we are not able to do any transactions with that stock as it was restricted as quality stock.
physically the user has issued the stock but in system , in MMBE the stock is in QI .
we couldnot cancel the material document also as it is throwing error .
can any one suggest how tos olve the problem.
your suggestion is highly appreciated.
Best regards
GP

Hi Sujith ,
I tried to do MB1B but it is giving following error message -
Change the inspection stock of material 2106800431 in QM only
Message no. QA495
Diagnosis
You want to make a stock posting to/from the inspection stock. This is not allowed for material 2106800431 because the quality inspection control has been activated by QM.
The following cases can occur:
The inspection stock should be increased, although an inspection is not foreseen for the current goods movement
The inspection stock should be released, although you can only do this using the QM transactions.
System Response
You cannot carry out the stock posting.
Procedure
Check both the QM inspection setup data and the movement type for material 2106800431 in the quality management view of the material master.
Exception:
If you post a return delivery to a vendor with reference to a purchase order, or cancel a goods receipt, the stock indicator from the order is proposed.
Check and modify this proposal as required.
The stock may have been transferred already and is therefore no longer in inspection stock.
But actually there is no inspection lot created for that material for that batch. so we cannot realease the material from inspection stock. but in MMBE the stock is in QI stock.
Regards

Inspection Lot not created after mvt 322.

Dear All,
I'm facing a problem : after a movement 322 no Inspection (QM) bach was created in QAVE...
In MMBE WM stock view I've got the lot number (quantity 1, stock type Q), and the storage bin which match with the inspection lot.
When trying to take the UD (QA11), the following error message appear :
MMBE :
Do you have any clue ?
Regards,

Hello Amol,
Thanks for your answer.
I gonna check QALS tomorrow as I don't have access to the system right now.
I need to make some clarifications to my previous message, in fact ten inspection lots was generated under the same material document which had 10 items (via MB1B).
9 Inspection lots has been accepted (321) and successfully put into the free stock by the quality, I only have this lot remaining coming from the same document as other ones.
Material Master/Quality Mgmt and inspection types for this article/Plant has not been changed and are correctly set...
I cannot use MB1B, mvt code 321 to move this QI stock to the free stock as QM is activated... I'll get something like "Change the inspection stock of material 0000000 in QM only".
I thinks that, to clean the stock, the only option i've got is to make an inventory from Q stock (mvt 713).
I'm trying to find out what are the root causes of this problem for this not to happen again....
Thanks again for your help,
Kevin
PS : Just checked QALS table this morning, indeed, the inspection lot does not exist.
So, i've got no trace of it in QM, but I'm able to find it in WM...
Message was edited by: Kevin Bou

Inspection lot not getting generated after PurcGR

Hi,
Inspection lot not generated after doing GR for a purchase order. what could be the reasons?
for the first 2 puchase orders, Inspection lot was created. however, for the 3rd Purchase order of 100qty, i did GR for 50 qty only. after then for new purchase orders, the material status has become unrestricted and directly going to stock.
Inspection type 01 is mainted in material master
QM info record has been maintained.
please clarify

Hi Nagaraj,
Try the following.
1. Check the inspection set up in the Material Master record for inspection type 01 whether 'post to inspn stock' is selected. If not, select it.
2. Check in Customizing for 'QM in Procurement' in 'Define QM system' activity, 'certified QM system - skip' is marked(Actual QM system). If this indicator is selected no inspection lot is created even if there is an active inspection type. This is valid if you maintain a target QM system in QM view of Material Master (Purchase data).
3. Check in IMG set up :
Quality Inspection -> Inspection lot creation -> Inspection for goods movement - whether inspection lot origin 01 is specified for movement type 101 and also ensure that QM is active for this movement type.
Please revert after trying these options.
Regards,
Swati

Goods Receipt generates inspection lot using inspection type 08

Hi,
I have two plants A and B. I have set up my materials with an 08 inspection type plant B. Material transfers from plant A and B generate an inspection lot using inspection type 08 and inspection lot origin 08. This works perfectly.
However if I use a stock transfer between two storage locations within 1 plant, using stock transfer order, inspection lot is generated using inspection type 08 when GR is performed.
Is there a link between 08 inspection type and 101 movement
Regards

Yes ,101 & 08 are associated with each other for stock transfer order that is only when receipt indicator is "X" and mvt indicator is prchase order.
If you do not want this to haapen then
copy mvt type 101 as Z01 & for this mvt type deactivate QM in
QCC3->inspection lot creation->Inspect for goods mvt->Deactivate Quality Inspection for a Movement Type>Z01-->deactivate
Use this mvt type when you are tranferring material from storage location to storage Location.
This will not create any inspection lot.
Edited by: Sujit Gujar on Aug 4, 2011 1:09 PM

CALIBRATION WITH OUT GENERATING THE INSPECTION LOT

Dear Friends,
I am clear with the regular process of calibration where the inspection lot is generated for equipment and result recording is done and ud is given.
But my client doesn't want to any of result recording. He want to just maintain the equipment schedule then send equipment to outside agency as per schedule for calibration. And when equipment is received back in he want to maintain the history and the next date should be triggered.
I have already done following :
IE01 >>> QDV1 >>> IP41 >>> IP10 >>> IP30 >>> IP24 >>>
now if i check in IW32 the purchase requisition is not generated automatically, pl help me in this regards,
Thanks and with regards.
Shekhar Mokashi

hi
if you don't want inspection lot for the order then you need to maintain blank for the inspection point in the task list then you don't get the task list.
and if you want to generatethe external service PR through the operation then selct the control key PM03(service control key)
then system ask you enter the vendor deatils and costelement purchase group etc.
pl try
ashok

No inspection lot generated for by product

Dear experts,
Whenever I am making a process order, my by-product is going to the unrestricted storage location through 531 movement but no final inspection lot is generated though I am maintaining inspection plan of origin 05 and inspection type 04 in material master. Please tell how I can get a final inspection lot to record inspection result??
Regards,
Sunit

>
Sunit Kumar Mitra wrote:
> Dear experts,
>
> Whenever I am making a process order, my by-product is going to the unrestricted storage location through 531 movement but no final inspection lot is generated though I am maintaining inspection plan of origin 05 and inspection type 04 in material master. Please tell how I can get a final inspection lot to record inspection result??
>
> Regards,
>
> Sunit
Sunit,
1. Inspection Type "05" should be active.
2. Check Movement type 531 in transaction OMJJ, here QM- Not active check box should not be active.
Regards,
Prasobh

Inspection lot should be automatically generated whenever reverse GI(262)

Hi to all,
My scenarios is ,
if we find any defect in raw material in shop floor after goods issue to production order (261),
we reverse the component (262) , then inspection lot should be automatically generated , but its not happening.
I tried by assigning inspection type 02(goods issue) to the material.
with that inspection lot is generated at the time of goods issue (261) not at the time of reversal.
Please sujjest me the better way to do this.

Check the SPRO setting - inspection for goods movement.
Generally the QM inspection is deactivated for 262.
Inspection lot origin for 262 is 05 , So used by using inspection type 05.
regards
Edited by: Sarvan on Mar 3, 2010 11:21 AM
Edited by: Sarvan on Mar 3, 2010 11:49 AM

Inspection lot for recurring inspection was created without user decision

A manual inspection lot was created for recurring inspection. When reporting results QE51, the user decision option is disable, therefore I can not move the batch from Quality Inspection to Unrestricted.

I still don't see how you are manually creating the lots. From the way you described it, the qty. is already in QI and you are then manually creating an 09 using QA01. If this is what you are doing, the manually created 09's will NOT be linked to the inventory in QI and they will not be able to be used to move the stock out of QI. NO MANUALLY CREATED inspection lots, (i.e transaction QA01), EVER control stock. To control stock, the inspection lot must have been triggerred by another event or transaction that caused the lot to be created., (QA07, GR, stock transfer, delivery creation, etc...)
What I don't know, is how you got the material into QI in the first place. How was the material moved into QI? When stock is moved into QI that should trigger an inspection lot. If QM is active for a material you shouldn't be able to use standard stock movements to place the material into QI. If you moved it and then activated QM you should get errors when activating an inspectoin type unless you have followed specific procedures for creating 08 lots for exisitng QI inventory.
So I think we are still missing some informaiton.
FF

No Inspection lot was generated PM

Similar Messages

Maybe you are looking for