No install because menus can't be updated

Hi,
I just tried to install the «Zen-Coding» extension for DreamWeaver CS4 (http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1965527) on a Mac G5 PPC running OS X 10.5.8. All I get after accepting the TOC in Extension Manager is a message that the extension won't be installed because the menus cannot be updated.
Other extensions like e.g. http://code.google.com/p/chrismckee-project-bay/wiki/HTML5Weaver install without a hitch.
Any help is gratefully appreciated, thank you!

I have the same problem installing the BC Extension. Using DW CS5.5, german on an iMac with Lion (10.7)
Already gave that issue to the BC support team. Any help or support would be great!

Similar Messages

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Can't install because it can't create a recovery disk?

I've been trying to install mountain lion but it keeps saying that it can't be installed because it can't create a recovery partition. I tried to reinstall lion from the recovery disk but it keeps giving me errors and says try reinstalling, but doesn't give the option to download a fresh copy of lion and apple has pulled the lion installer from the mac app store. What do I do?

See "what to do if the installer warns that no Recovery System can be created" in About OS X Recovery.

I have installed maverick but can seem to update

hello and thanking you in advance for taking the time to answer my question to the following...
I have just updated to the beautiful Maverick and the installation went well. But the Maverick system seem to be only updating when I sign in as a guest on my own computer. And on the Adim side everything looks the same eg. safari, cal etc.. can you help.... DO i have to back up everyting and wipe my mechine then re-install the Maverick on the my pro as a new computer??
Regards
JD.......

Hi Lamont ,
As both the Creative Suite versions are quite outdated ,and Adobe does not provide any support for any of the Creative Suite versions.
I would recommend you to subscribe for Creative Cloud. An yearly commitment will charge you very nominal.
Regards
Sukrit Dhingra

ITunes won't install because an older version of iTunes cannot be removed

I'm running on Windows XP.
I had tried to update my iTunes a few days ago and it was failing because it complained about iTunes.msi. I tried to uninstall and it had the same complain. So I manually removed it and started to remove all references to apple and iTunes in my registry. After that, it no longer showed up in my add/remove applications but if I try to install iTunes (latest or an older version), it complains that it can't install because it can't remove an older version of iTunes.
I downloaded Windows Install Clean Up, but it doesn't list iTunes in there or anything that looks like it might be it. I've tried a number of registry cleaners but still no luck. Any ideas? It's obviously finding some information about my old iTunes install in there somewhere, but it can't figure out how to remove it. I wish it had some kind of debugging mode where it would tell me why it thinks I have iTunes installed still.
Any help would be appreciated.

Hi Ace ... I try not to post links to alternate locations for CleanUp downloads, because that tends to lead to the download location being shut down. (Happened twice for me the day after it was removed from the Microsoft Downloads Center.)
Assuming you've got trouble with an iTunes .msi file, here's a copy of my now-standard spiel on hunting down, installing and using CleanUp:
These sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes 9.2 again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

I can't install quick time - can't find .msi file

QuickTime won't install because it can't find the .msi file - and neither can I. Have searched computer - can't locate. Have uninstalled and reinstalled. No joy. Any other suggestions?

Take a look at Install Missing Components from my troubleshooting tip and scroll down to the end of the Further Information area for a download link for QuickTime. Between the two you should be able to extract the .msi file. Or read the second box on uninstalling all Apple components, cleaning up, and then reinstalling.
tt2

HT4972 Why can't I update my iPad 2?

Why isn't their a update to iOS 5 or later for my iPad 2??? Any help will be appreciated.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.htmlhttp://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks

Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT

What can I do about driver updates that will not install because of an "unknown error".

I have an HP p6530 Pavilion that is taking a while to startup. Not real long but longer then it should. I tried to install driver updates from Intel for the Chipset and RAID but when I download and install it will not finish the install because of an "unknown error" and then setup exits. I could really use advice from anyone that can help.

Have you tried to disable your virus protection and any running programs in the system tray? Turn off any programs that are not necessary before you run the updates. Make sure you run the updates as administrator (right click on the driver install program and click on run as administrator).
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

Took delivery of imac yesterday with pre-installed Pages, Numbers and Keynote. App store says they need updating but won't let me because I've never owned the major version of the software. I have paid like anyone else, so why can't I update?

You must be signed into the Apple Store with your Apple ID or it won't work.
and
How to deal with a 100 Store Error:
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here;
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences/
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store.

TS1717 i have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me it told me your software is up to date and close

I have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me,it told me your software is up to date and then closed on me,please help.

it said it wasnt installed correctly
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

How can I install plugins? my files are not opening because some are missing after updating my OS

How can I install plugins? my files are not opening because some are missing after updating my OS
I can´t update the software because it crashes
Thanks

Casiii which Adobe software or service is your inquiry in reference too?

Although the Snow Leopard updated to 10.9.2 Maverisck, so I then installed FCPX 10.1 I can not pour 4k video on your computer because it can not see the Sony FDR Ax100e. Thing left for me to do?

Although the Snow Leopard updated to 10.9.2 Maverisck, so Ithen installed FCPX 10.1 I can not pour 4k video on your computer because it can not see the Sony FDR Ax100e. Thing left for me to do?

Sony has put in a position that the camera was connected with their software called PlayMemories Home . This then allows you to import movies and photos on the computer and then use them in different ways. However, when the camera is connected to the mac and I said Mass Storage USB Connected , then you execute this program I told you about two seconds later , however returns an error message that is: Connect the device to your computer or multimedia support . I do not understand .

Have Mac OS X 10.4.11; bought Quickbooks and it requires 10.6; updated to 10.6 but can't install because it won't open without 10.5

Have 10.4.11; bought Quickbooks and it wants 10.6; upgraded to 10.6 but can't install because it won't open without 10.5. Don't see upgrade for 10.5 in download list.

Hi Loraine,
Mac OS X 10.5 (Leopard) was between Mac OS X 10.4 (Tiger) and Mac OS X 10.6 (Snow Leopard). If your Quickbooks program indicates it requires Mac OS X 10.6 (Snow Leopard) and you've installed that, then you've done what you can (you can't install 10.5 when you already have 10.6 installed...you are already more up to date).
It sounds like you are having an issue with the Quickbooks program so you may wish to contact those that make / support that application.
Cheers.

PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?

PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?

Don't have a direct answer. But did you install the updates. They might resolve the problem.

No install because menus can't be updated

Similar Messages

Maybe you are looking for