No install discs, how do I get X11 program?

I was given an older but opperable PowerBook Mac OS X 10.4.11 recently. I have spent the last couple weeks getting to know it. I haven't used a mac in many decades. I purchased a program that requires X11 to run. I have no install discs so I tried to download it from Apple's site but am still not getting it right I suppose.
I am needing some guidance in getting X11.

Welcome to Apple Discussions!
Contact the original seller of the computer. They can't sell you the computer without installation discs. The installation discs provide valuable hardware test programs, as well as custom installable software that does not ship with the operating system. If they lost the discs, ask them to call AppleCare for you to get those discs. If you lost the discs, call AppleCare. Here's their numbers worldwide:
http://www.apple.com/contact/phone_contacts.html

Similar Messages

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • I have an SL install disc; how many machines can I install it on?

    I have an SL install disc; how many machines can I install it on?

    frederickmitch wrote:
    I have an SL install disc; how many machines can I install it on?
    If it's a white disk with 10.6.3, technically as many Mac's that came with 10.6.3 or below that can run 10.6.
    Legally, only one.
    If it's a grey disk, then only the same model of Mac, as there are no hardware drivers for other Mac models on the grey disks.

  • Due to flash drive error on MBA my drive was wiped yesterday and OS re installed.  How to I get my bookmarks still on my iPhone back onto the mba

    Due to flash drive error on MBA my drive was wiped yesterday and OS re installed.  How to I get my bookmarks still on my iPhone back onto the mba

    Hi Nathanbeyondme!
    I have an article that can help you with that question:
    OS X Mountain Lion: Store your content in iCloud
    http://support.apple.com/kb/PH11421
    Safari bookmarks and tabs
    iCloud keeps your bookmarks and Reading List the same in Safari on your Mac, iPhone, iPad, and iPod touch. On your Mac, Safari also uses iCloud to let you open tabs that are open on your other devices. You set up the Safari service in iCloud preferences.
    If you are having issues with syncing these bookmarks, you will want to reference the following article:
    iCloud: Troubleshooting iCloud Bookmarks and Reading List
    http://support.apple.com/kb/ts4001
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
    Powerbook G4   Mac OS X (10.4.7)  

  • I accidentally deleted Candy Crush off my phone, and when I went to reinstall it, it reinstalled but has now disappeared from my screen.  I went to the app store and it says there that it is still installed.  How do I get it back?

    I accidentally deleted Candy Crush off my phone, and when I went to reinstall it, it reinstalled but has now disappeared from my screen.  I went to the app store and it says there that it is still installed.  How do I get it back?

    You may have accidentally put it in a folder instead of deleting it. Check all your folders to see if it is in one.

  • Update notification remains after update installed.  How to I get rid of the notification?

    I installed the iPhoto update 9.4.1 but the update notification remains.  I've checked iPhoto and it is definitely showing that 9.4.1 is installed.
    How do I get rid of the unwanted notification?
    iMac, Mac OS X (10.6.5)

    Try deleting the cache, cookies, and preference files associated wtih the App Store then restart your Mac.
    Quit the App Store if it's open.
    Now open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy/paste:    ~/LIbrary/Caches/com.apple.appstore
    Click Go then move the Cache.db file from the com.apple.appstore folder to the Trash.
    Type or copy/paste:    ~/Library/Cookies
    Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
    Type or copy/paste:    ~/Library/Preferences
    Click Go then move the com.apple.appstore.plist file from the Preferences folder to the Trash.
    See if that made a difference ...

  • Actually in Photoshop CC is Camera Raw (Vesion 8.0.0.137) installed. How ca I get a newer Version? Updater says, everthing is actual.

    Actually in Photoshop CC is Camera Raw (Vesion 8.0.0.137) installed. How ca I get a newer Version? Updater says, everthing is actual.

    Moving this discussion to the Camera RAW forum.

  • I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard.  When I run the Snow Leo install it errors saying I need OS 10.5 to run the install.  How do I get around this?  I've read that it's possible to go direcectly from 10.4 to 10.6.

    I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard.  When I run the Snow Leo install it errors saying I need OS 10.5 to run the install.  How do I get around this?  I've read that it's possible to go direcectly from 10.4 to 10.6.

    To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
    Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088

  • TS1702 Had to restore 3GS and most of my working paid apps will not re-install. How do I get the previous version until I can upgrade to new phone?

    I did a back up restore and some the apps I have purchased will not re-install. How do i get them back on my 3GS OS4.2.1?

    Music, video and some other stuff are not in your backup.  They get synced to your iPod from your iTunes library as part of the update.  It appears that the music were not in your iTunes library.  You only get one download of music and it is up to your to back it up.  However, Apple has been known to allow a redownload.  You can contact the Itunes store and ask them.  Go here and select iTunes Account and Billing and select the appropriate topic.
    http://www.apple.com/support/itunes/

  • When trying to statup with install disc inserted,all i get is an apple logo.when i try starting using command v it seems to see the cpu,but does not list any drivers.any thoughts appreciated!

    when trying to startup with install disc inserted,all i get is an apple logo.when using command v keys,it seems to see the cpu, but doesn't list any drivers.any idea what,s wrong?

    That is the wrong system disc, the Mid 2007 Mac Mini's originally came with Tiger 10.4. You must have been sent the wrong disc, because that gray 10.6 system disc is obviously for a later Mac.
    Mac mini (Mid 2007) - Technical Specifications
    At this point I'm afraid that your options are very limited.
    1. Call Apple, have your serial # handy and ask for a replacement Tiger disc set. Problem is that it wouldn't be of much use, except for maybe running the Apple Hardware Test.
    Apple - Support - iMac - Service FAQ
    2. Purchase a Retail Snow Leopard Upgrade disc.
    Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
    As for the RAM, if 2GB is shown in both Apple / About This Mac and in the Activity Monitor then there is a pretty good chance that's it OK. Of course it is hard to test without the original disc set and in your case may need to be done with a third party RAM checker like Memtest OS X

  • Computer Crashed with CS4 - How can I get these programs to my new computer?

    Computer Crashed with CS4 - How can I get these programs to my new computer?

    You will want to install them from the installation media.

  • How do I get a program to run inside flash

    How do I get a program on my harddrive to run inside flash on my computer? I would like to build a Flash front end for my boat pc, but I would need to be able able to open up a program inside a flash.exe?
    would a external .ini  File work? if so what code would I use internally to execute the .ini
    any help would be greatly appreciated Sincerely newwaveboats

    Thanks for the tip about Zink, but it is not what I'm after.
    On (Release)
    FS Command ("exec", "install.exe")
    End On
    google search just revealed this button code but it was for back in the day "Flash 8" as1 or 2.  as3 your not allowed code to be plaaced on buttons.
    So I know it is possible, I just need the know how.
    EDIT: I looked further into to this, and it is perfect for my needs. my first look was quick and I saw a close to 300 price tag and that it was a compiler, 2nd longer look showed it was free for personal use and has lots of great system features.
    Thanks again combustion007 for your help was greatly appreciated, Sorry I did not realize how perfect it was when you first told me about it.

  • How do I get a program to start up when I turn my computer on?

    You know how in the dock, there's a little triangle under a program that's technically running even if you don't have a window open? Dashboard and Finder always have that triangle after start up. How do I get another program, like Safari to "start up" with that triangel all the time even if I don't want to have the browser window open when I turn my computer on?

    Open the Accounts pane of System Preferences, add it to the list of login items for your account, and check the box to hide it. Some applications, such as Mail, ignore the box in Mac OS X 10.4 and are always visible when launched; in this case, an AppleScript can be used to hide them.
    (24829)

  • I just purchased a MacBookPro after having a MacBook.  I have ILife, IWorks and Office for Mac.  How do I get those programs on to my MacBook Pro?  I will still use my MacBook at work so I need those programs to remain on it as well.

    I just purchased a MacBookPro after having a MacBook.  I have ILife, IWorks and Office for Mac.  How do I get those programs on to my MacBook Pro?  I will still use my MacBook at work so I need those programs to remain on it as well.

    You need a Firewire cable to run between the two Macs.  Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP.  Here's more info from Apple.
    You might have an issue with the Serial number for Office, but hopefully you have that around.
    Hope this helps.

Maybe you are looking for

  • How do I set up genius mixes on my iPhone with iTunes match

    I have used genius mixes on my phone, but now that I have iTunes match I no longer see the controls for turning on the genius mixes for my phone.  How do I do that?

  • Officejet Pro 8600 Plus paper tray will not go all the way in so cannot print

    Have loved this printer for almost two years but suddenly the drawer which holds the paper will not go all the way in so cannot print.  Took it to a so-called tech at Office Depot who said that because you cannot open/remove the tray, there is no way

  • Random unresponsive desktop items since 10.5.7

    I've noticed since 10.5.7 every now a then the desktop items become completely un-clickable / un-dragable, Finder still works perfectly, the problem is only with the desktop items and folders. A quick 'killall Finder' command fixes the problem in Ter

  • Floppy doesn't work...

    I just built a system with the KT2 Combo motherboard, but I have one small problem--the floppy drive won't work with it. The bios recognizes it (on either primary or secondary cable hookup), and it works perfectly in another system, but it doesn't wo

  • QM in SD and MM

    Dear all i have two slides to represent,one is QM in SD in which i have to know that what is relashionship of Quality information in sales order. Also one is QM in MM in which i want to know the Technical delivery terms relashionship with Quotation.