No installation disk with lion

Hi Folks
After runnuning a Verify Disk in Disk Utility, the program tells me I need to start the computer from my installation disk go to Disk Utility and then run Repair Disk. I download my Lion upgrade from the App Store and have no installation disk. Anyone tell me what I can do to make the repairs to my disk? Much appreciated. Thanks

OS X Lion: About Lion Recovery

Similar Messages

Can't Zap the P-RAM , Can't start from an installer disk with the C-Key...

Can't Zap the P-RAM , Can't start from an installer disk with the C-Key... or The D-Key for Apple Hardware test or run with the shift Key in Safe Mode!!!
About a week ago I started to have problems with the Mac after 10.5.6! First the Mac after shut down would restart on its own in 10 to 15 minutes. I read in various forums about some of the 10.5.6 problems. I did a clean reinstall where the Mac created a previous system folder. After this suddenly mail, I-Chat as well as some other programs would open, then close immediately! Since I did not have things backed up because I didn't have a large drive, I dragged my files and apps to another drive and reformatted the drive zeroing out all data and did a fresh new install then brought in the combo 10.5.6 update.The Mac is running correctly but I can't Zap the P-Ram, startup from the Mac OS X installer Dvd with the C key or run Apple Hardware Test with the D key or boot in safe mode with the shift key. I can boot any of the Bootable disks from the start-up Disk in Preferences.
I went over this with Apple and they suggested I run the Apple Hardware test. It won't run on this machine because I can't boot it with the D- Key. I ran tech Tools and every single thing checks out OK! This Mac has worked great since I got it in I believe Feb or March of 2007.

Make sure that you don't have firmware password protection enabled. It will prevent some boot key shortcuts from working, like clearing NVRAM, etc. You can disable firmware password protection by booting off the OSX DVD and loading the utility.

USB disk with Lion recovery partition + storage partition shared by Mac & Windows: Windows can't read it.

I have a Lexar Express Card flash drive (16GB). It works the same as any USB flash drive.
I use it to move files between Mac OS and Windows 7/Bootcamp: Drag files to it in one OS, reboot in the other OS, take the files back off.
Recently, I discovered the Lion Recvoery Disk Assistant, which allows you to create a Lion Recovery Disk on an external drive (just in case). So, I decided I would use a ~1GB partition on the express card for the recovery disk, and leave a ~15GB partition for the same file sharing I am used to.
This setup requires that the disk use a GUID Partition Map with a HFS+ file system for the recovery partition, and I use a FAT32 file system for the shared partition. The partitioning was done in Mac OS Disk Utility, and then I think the Recovery Disk Assistant modifies it further by adding an EFI partition.
When I try to access the disk in Windows 7, it says it needs to format the drive first (which it shows to be a ~200MB "volume" on a disk with ~15.4GB "capacity"). From what I have been able to find on my own, Windows 7 should be fine with a disk using a GUID Partition Map, and both OSs can use a FAT32 file system. So why does Windows only see the 200MB EFI partition at the first section of the disk, and not the other partitions, particularly the FAT32 file sharing partition?
The last thing I will mention is that the disk is being seen by Windows as a MBR/Master Boot Record partitioned device. I'm assuming this is the GPT/GUID Partition Table's protective partition's fault; the one MBR partition that keeps the GPT partitioning safe from software that doesn't recognize or know about GPT.
I'm asking on the Apple discussions because it's in Boot Camp and I'm primarily a Mac user. If anyone knows a better, Windows-focused place to ask, please say so!

You really need to search first as there are A LOT of post's with the same question. Different issues with different Models.
What model/year do you have and what OS were you using first? Snow Leopard (10.6) is the last one that came with a CD/DVD with the computer.
You insert the disk when it's done installing W7 and reboots into Windows then you insert the 10.6 MacOS Installer disk for the Windows drivers. Lion does it a different way.
PR7 wrote:
...........because I lost the OS X Lion install disk that came with my Mac)..........
Lion (10.7) is only a download now, there are no more physical disk's, (unless you pay the extra money for the USB installer thumb drive directly from Apple). So if your computer came with 10.7 Lion installed then you will not have a physical disk. There should be a "Repair Partition" that you use to boot to if you need to repair or to reinstall the Lion OS.
PR7 wrote:
However, when I log on my Windows account and I insert the bootable OS X Lion install disk, Windows doesn't read it. I can't even find the disk in Windows Explorer or even Right Click on the disk.
Please Help!
Thank You!!!
I don't believe the Boot Camps drivers are in the Lion download anymore, ( to keep the download smaller?), the only way you get them now is when you start BCAssistant, it will prompt you to download them onto a CD, or USB drive. You have to download and install the Boot Camp drivers separately. You then insert it when it's done, when Windows boots.

I never received an installation disk with my iMac. I do require one now. How do I get it?

Hello everyone,
My wife and I purchased an iMac about 1,5 years ago. Perhaps 2. And everything worked perfectly. We even got the iPad 3 to go with and next month an iphone 5.
However, since a few weeks my mail didn't respond anymore. Did not open, didn't do anything anymore. I found a solution and had it working again.
NOW, it's jPhoto that is not responding anymore. Though only on MY account. We have two accounts on the system, but with my wife it is working. Just not on mine.
I have found Disk Utilities and did a permissions repair. Which worked. I think... But then the disk repair does not. I can verify the disk but not repair it. It requires a reboot from the Mac OS X installation disk.
I never received one. Was I supposed to get one with my iMac? Or should I make one? Can I still make one with the problems I am having? Or am I copying the problems to that disk?
Can anyone enlighten me?
Thanks,
The Demacker Family.
PS: We did update to iOS 10.6 a while ago.

In the meantime, if you really are on 10.6, you can try and repair the drive by using these options, both explained here. Safe Boot and fsck from single user mode.
http://support.apple.com/kb/TS1417

How to clone an entire disk with Lion ( Rescue)

Hello there,
I have a faulty (hardware-wise) drive in my 2011 macbook pro and will probably get a replacement drive from the vendor, but I was wondering whether there is (by now) a way (tool) to clone the disk completely, including the (main) lion-, its rescue- and finally the windows7 bootcamp partition without having to completely re-install both systems?
Best,
-Jörg

Carbon Copy Cloner http://www.bombich.com/
Clones Lion including the Recovery HD partition http://help.bombich.com/kb/troubleshooting/will-ccc-clone-the-recovery-hd-partit ion-on-lion and the contents of your BootCamp Windows http://help.bombich.com/kb/troubleshooting/can-ccc-back-up-my-bootcamp-windows-p artition but Windows will not be bootable.
CopyCatX http://www.subrosasoft.com/OSXSoftware/index.php?main_page=product_info&cPath=20 2&products_id=7 seems another one but I can't find anything on the Recovery HD there.
Same for Clonezilla http://clonezilla.org/
Stefan

How do I eject a stuck Leopard installer disk with only a wireless keyboard

Today I bought a brand new mini at the Apple Store, with Tiger installed and the Leopard disk "in the box". On install, I decided to erase the disk and start fresh. I aborted after it started because I wanted to go back and partition. Sadly, it had already wiped Tiger, and now it refuses to install Leopard because it's a bare-metal install, and not an upgrade.
Fine. Understood.
Problem is, my Leopard disk is stuck inside and I can't get it out. I've only got a wireless keyboard, and it isn't recognized during the boot, so I can't press the eject key (C?, Eject? Doesn't matter, it only sees the mouse). HELP! I'm in a Catch-22 situation.
Sure I could go wake the neighbors in the middle of the night, but isn't there some way? What happened to the paperclip trick? No more?

oregano wrote:
Today I bought a brand new mini at the Apple Store, with Tiger installed and the Leopard disk "in the box". On install, I decided to erase the disk and start fresh. I aborted after it started because I wanted to go back and partition. Sadly, it had already wiped Tiger, and now it refuses to install Leopard because it's a bare-metal install, and not an upgrade.
I did not realize that Apple had two kinds of Leopards - upgrade and full.
I would go back to the store where you bought it and demand they fix it immediately.
They also should have supplied you with a Tiger disk.

I would like to share my NTFS disk with Lion?

Mac OS X 10.7 note: Mac OS X Lion includes a new SMB/CIFS server called smbx. Unfortunately this closed-source replacement for Samba doesn’t allow any other volumes than HFS+ volumes to be shared. It returns an error when you attempt to access any shares that are on NTFS, FAT32, exFAT volumes. Currently we don’t know any solution to this issue, so please contact Apple if you are affected by this bug.
Does someone knows if Apple is going to allow this kind of sharing by sending out a patch in smbx?

Just plug the iPod in and open iTunes. It will the iPod will show in the devices section of the iTunes sidebar. Click on the iPod go to the summary tab and set you syncing options. You can do this for as many iPods/iPhones/iPads as you like.

How do I get A new installation disk???

Hello,
I reacently was given a linksys wireless b broadband router
#befw11s4 ver.4, however it did not have the installation disk with it. When I hooked it up(and yes I hooked it up correctly) it worked just fine, well just fine if you just want to use the desktop that origanally had dsl,
But the router(which by now I have a couple of new words for) simply refuses to have anything to do with my laptop or my linksys wireless b notebook adapter. So the only thing that I know is I need the installation cd, but seeing as I don't have one the only logical solution would be to get one, and that is the problem, so my question is where do you get the cd's or just downloading the contents would be fine, I don't need a cd just whats on it. Oh and if possible could someone point me to a free one? Because if I had any money I would have already put mine through the wall and bought a new one with better standards and a cd.
Thank you for you're time and help,
Chris Cain

Thank you for you're time and help.
Peace and prosperity dude
Chris CainMessage Edited by Cowboy_one_one on 09-26-200608:53 AM

I bought a MBPro which came with Lion installed,i also wanted to have a copy of installation disc so i used mac app store.Normally if an app is already bought there is a warning or a sign that informs the buyer.I've charged for this download is it normal?

Hi ,i bought a MacBookPro which came with Lion installed on it (i have registered my mac book pro right after i bought it), i also wanted to have a copy of the installation disc in case of a crash, so i used mac app store to get it.Normally if an app is already bought (for iphone app store) there is a warning or a sign that informs the buyer, than the app store lets the buyer to re-download/re-install the app.I've charged for this download afterwards, because i was using virtual credit card, there was not enough money transferred to that card during that download but the app store let me download it anyway. I haven't charged before the download, the app store first let me to download it then it requested that amount of money for next download wich it was a free app. Can anybody enlight me? thanks

Hi ...
i also wanted to have a copy of the installation disc in case of a crash
If you have problems with your Mac you use Lion Recovery
However, you can create your own installation disc > How to create an OS X Lion installation disc | MacFixIt - CNET Reviews
Since Lion came pre installed on your Mac, the App Store doesn't not recognize that as a purchase so you if you want to re download Lion to create a boot disk you will have to pay for it. You can then re download Lion on all your authorized Macs for free.

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?

Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?

Once the Lion download is complete quit the installer and follow these directions. The file you need to make a boot disk disappears after you install Lion.
Egg Freckles | Burning A Lion Boot Disc
However, the Lion installation includes a recovery partition. It won't be of help if your entire HD dies but is very handy otherwise. This Knowledge Base article has a lot of good information about Lion's recovery partition.
OS X Lion: About Lion Recovery

My computer came with Lion but no install disks, how can I do a reinstaller DVD ??

This is only part of my problem.
My computer came with Lion but no install disks, I would love to have a disaster recovery DVD just in case, The is the LionDiskMaker script that says it would do it for Lion and Mountain Lion but when I tried, It did not find what it needed to create such a DVD.
On the other hand, when I replace my MacBookPro last october, the lady at the Apple Store online used my gmail adress instead of my videotron.ca adress... So now, I have a dual identity, one that owns a MacBookPro and the other that has done business with Apple for ages.
So :
1. Can I unify my 2 Apple ID ??
2. Can I get a kind of installer of Lion without paying the price ??
Yours truly,
Binaire101

You need to download and save the Lion and/or Mountain Lion installer app.
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
Unfortunately, the link for getting specific hardware versions has disappeared. So basically:
Get yourself a spare hard drive freshly erased or with a freshly erased partition of around 8 GBs or more.
Boot to your Recovery HD. Select Reinstall Lion from the main menu.
From the beginning screen select your spare partition/drive as the target destination then begin the download.
At the end of the download you will observe an Install button for you to click. Now this is important - as soon as that gadget appears you must abort the installation process. There are only two reliable ways to do this quickly: a. yank the cable for the drive from the computer; b. pull the power on the computer - shut it down quickly.
This will result in your finding a folder on the drive that contains InstallESD.dmg that you can now use to create a bootable USB flash drive installer based on the special build for your model. Use it until the next public release of Lion appears or you move on to Mountain Lion.
If you do not stop the download process immediately upon its completion you will end up with an installer that always boots to a non-functioning installation progress window instead of the normal main menu.

MacBook Pro with Lion pre-installed. How to get installer?

Ok, so I purchased a shiny new MacBook Pro 15" yesterday, which came with Lion pre-installed.
I am planning to downgrade to Snow Leopard. Don't ask me why, I just don't want Lion at this time.
My question is: how do I get a Lion installer, which I can put away somewhere safe until I'm ready to upgrade to Lion again? My MBP came with a Lion license, so I shouldn't have to buy it again, right?
Any suggestions greatly appreciated!

No need to buy another license, all you have to do is create a Lion Recovery USB (perhaps 2 for safety)
1: USB 1+ GB formatted GUID OS X Extended Journaled in Disk Utility
2: Lion Recovery Disk Assistant > USB
https://support.apple.com/kb/dl1433
3: Optional: Carbon Copy Cloner your present Lion OS X partition to a external GUID OS X Extended drive, it's hold the option key bootable.
(hold option to boot from USB if you need it)
https://discussions.apple.com/message/16276201#16276201
https://discussions.apple.com/thread/3264421?start=0&tstart=0

Why Apple did not provide Installation Disk in MacBook Pro Mac OS Lion 10.7?

I want to reinstall my MacBook Pro with Mac OS X Lion , I want to reinstall it without using Ethernet, Wi-fi, etc... I want to reinstall using a Installation Disk but there is no Installation Disk when I bought my MacBook Pro. Why Apple did not provide Installation Disk? It is better to have it. It is very useful. Right? I want to reinstall without using Ethernet. I want Installation Disk Mac OS X Lion! I ask price from Power Mac for upgrading . Php 1,500 .

selcor wrote:
Yeah, your right. I will pay a amount of Php 1,500 for upgrading or reinstalling to the Power Mac , . So expensive. Can I borrow your Installer of Mac OS X Lion or Mac OS X Mountaion Lion? ((= So that I upgrade or reinstall it for free?
App store. Pay what your country's App store ask. Don't be a tightarse.
Good Luck
Pete

Macbook Pro didn't come with Installation disk

Hello. My 13inch Macbook pro just arrived today. It's Mac OS X Lion 10.7. After powering it up my first order of buisness was to install windows 7 through bootcamp. Then I made the discovery that this Macbook didn't come with an installation disk which I find damned odd. I checked the box and the little notebook holders, and there's no disk. This thing isn't even a day out of the box, so should I call apple and see if they'll send me one or is there something I'm missing?

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.

No installation disk with lion

Similar Messages

Maybe you are looking for