No Integration Server under Adapter Engine at Communication Channel
Hello all,
This is new PI7.0 install.
I configured a file Adapter communication channel for an Integration Scenario.
At field "Adapter Engine" under Parameters tap I am not able to select the Integration Server.
Pull down menu is empty.
I did sxmb_adm and blog 6077 that got "Integration Server" in file adapter. Later to that file to file scenario worked yesterday. However after java+abap stack complete restart (to cleanup unwanted manually created business system of type WEB AS ABAP) the problem came back today.
I repeated again same blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory sxmb_adm, sldcheck, rz70 all looks good, but no luck.
There is a note from forum to change the content maintenance under
SLD->Administration->Content Maintenance->Subset (Landscape description)...
Need some pointers on what to change & get the file adapter to work? Thanks.
Another observation is all adapters got empty menu (no Integration Server). However IDOC, HTTP got integration server populated.
====================
Re: No Integration Server under Adapter Engine at Communication Channel config
Posted: Sep 12, 2007 4:46 PM in response to: Jochen Schertel
Hi All,
the problem was related to missing some Associations under Contend Maintenance for the Integration Server.
After implementing again, the problem was solved!
Regards,
Jochen
====================
Hi Jochen,
Can you please check following parameters in sxmb_adm on your application server.
Goto TC : sxmb_adm...select Integration Engine configuration n check whether you have maintained global configuration data as
Role of Business System : Application system
and Corresponding Integ. Server : http://xi hostname:port/sap/xi/engine?type=entry
Also check if you have created following RFC destinations:
1. INTEGRATION_DIRECTORY_HMI(H)
2.LCRSAPRFC (TCP/IP)
3.SAPSLDAPI
Nilesh
Nilesh
Similar Messages
-
How to change connection port between INTEGRATION SERVER and Adapter Engine
Hi,
I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
Please advise ?
Thank You and Regards
FernandHI,
The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready etc.
SO go to SMQ2 and check the status of the queues.
Also have a look into this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
<i>
Why I can see this messages only in the integration server?</i>
>>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
Regards,
Moorthy -
Adapter Engine In Communication Channel Creation
Hi All,
Im trying the first scenario in new PI 7.0 server.
When i tried to use a file adapter, after selecting the transport and msg protocol..
In the adapter engine..I dont see anything in the drop down..
can u pls help me out on this..has ne one faced such a situation?
I have to start development as soon as possible..
Regards,
TejaIm trying the first scenario in new PI 7.0 server.
In the adapter engine..I dont see anything in the drop down..
Some configuration missing......Check page-129 of this document:
https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000659947&_OBJECT=011000358700005909032005E
From the above document check:
Adapter Engine Not Visible in SLD, RWB, and Directory
Regards,
Abhishek. -
Testing through RWB under Adapter Engine
Hi All
I know i can test my scenario through RWB through Test tab.
The problem i am facing is---- when i am testing using Integration Engine after providing necessary details i am getting a message in moni thats fine but when i am testing the same scenario using Adapter Engine by giving same details i am getting error "Error when sending message: 403 Forbidden"
what could be the problem?
Regards
Dheeraj KumarHi Aamir
the test Tab under adapter engine in RWB is used when you have de-centralized adapter engine.
check this page http://help.sap.com/saphelp_nw04/helpdata/en/25/9c2f3ffed33d67e10000000a114084/frameset.htm its saying This Adapter Engine is a central Adapter Engine its not related to de-central Adapter Engine.
This Adapter Engine resides under Integration Server.
so i believe the prob is because of authorization, if i am not correct please correct me, by this answer i am not telling you that you are wrong i am just putting my view.
Please check and if i am wrong correct me.
Regards
Dheeraj Kumar -
Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7
+Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at 2.00 - 3.00 p.m. Singapore Time (UTC +8)+
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, September 1, 2009:
SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
Thanks & Best Regards,
Sarma SishtaHi,
This was one of the good session...
Especially the features such as;
-- TCP/IP connection control with JMS adapters
-- Empty file Handling
-- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
-- Message Prioritization
-- single IDOC Ack for IDOC Packaging
-- IDOC packaging
-- and many more........................
Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
Thanks
Swarup -
PI 7.0: Error when calling an adapter by using communication channel
Hello Experts,
We have a mapping scenario for ERP -> PI -> web service. Few details from ERP will be sent via PI to Web service.
Once the web service authenticates, token and sign will be generated. Here an RFC adapter is used for configuring the RFC receiver communication channel and provided the ERP system logon details at the RFC client parameter.
An error is received as mentioned below.
Error while lookup Exception during processing the payload.Problem when calling an adapter by using communication channel CC_Rcvr_RFC_Lookup_TokenSign (Party: , Service: BS_QV6_700, Object ID: 54e904ebf3d7382a84a0f83cd292b810)
XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>'. com.sap.aii.mapping.lookup.LookupException
The logon details in RFC parameter are corrected. Re-activated the the communication channel and refreshed the cache.
But still the error is not resolved.Please let me know if there is anything else i need to check.
Thanks in advance.
Regards,
SriHello,
You could also check note 730870 FAQ XI 3.0/ PI 7.0/ PI 7.1 RFC Adapter
Q 16:
While sending a message to the RfcAdapter the error "...functiontemplate from repository was <null>" is shown. Which reasons are possible?
Regards,
Sarah -
Under Adapter engine Test buttion option
Hi Gurus,
I Have small doubt we have option like Test message at RWB
RWB--->COMPONENT MONITORING--->Adapter engine --->Test message ,what is the purpose of this test message option at Adapter engine.
It is same as sending data from Integration engine if so when ever we are sending data from AE we are getting some issue .Can any body clarify this.
Thanks
MadhuHi Madhu,
Check out the below thread:
https://scn.sap.com/thread/1402225
You can also check out this excellent blog for extra information:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/02/17/howto--send-test-messages-to-the-adapter-engine-to-an-integrated-configuration
Regards
Bikash -
Question about Integrated Configuration (Advanced Adapter Engine in PI 7.1)
Hello,
When you use Advanced Adapter Engine in PI 7.1 with Integrated Configuration scenario, it bypasses ABAP stack therefore you can't monitor processed message in SXMB_MONI. Instead this message shows up only in RWB Adapter Engine message monitoring. When you select the message from there, you can view the BEFORE mapping payload in Message Content tab. My question is how do you view the AFTER mapping payload when using Integrated Configuration.
Thanks,
Jay> My question is how do you view the AFTER mapping payload when using Integrated Configuration.
You can't.
So first you have to configure a standard scenario and test the stuff. When everything is fine, remove the standard scenario and create an Integrated Configuration. -
Alert if no file process :Same file adapter with same communication Channel
Hi XI Guru,
I have encountered 1 requirement from my client where, sender will send different data file with different file name. And there want XI to alert the user if no file to process for the schedule date. Please take note that the communication channel is common to all the sender.
Example:
Communication Channel : CC_FILE_SND
FILE_10.TXT ---> Every month on the 10, user have to send FILE_10.TXT to process
FILE_20.TXT ---> Every month on the 20, user have to send FILE_20.TXT to process
If user fail or forget to send the FILE_10.TXT and FILE_20.TXT on special schedule date to process, XI should alert user.
Many thanksHi Lord
<<< there want XI to alert the user if no file to process for the schedule date.
Can you tell me how you are planning to configure this schedule date in your sender file adapter. I mean this date will be fixed or it is going to be change according to the requirement.
Now for the second part in order to alert the user if file is not there, one solution is to use BPM with wait step ( specify the time in this step ), but then again it takes me back to my previous question, the time seems to be different everytime according to the requirement. -
In the XI Szenario i cannot assign Adapter Engine in Communicationchannel
Hi There,
i have a new problem. I imported now the whole Scenario from my XI Cons System into the XI Prod System.
After that i have to reconfigure the Communication Channels.
URL etc.. but in Prod System i cannot Assign Integration Server to Adapter Engine..
i maked a screenshot so you cann see what i mean:
(If you cannot see the screenshots.. please provide me a Mail Adress.. then i can send them to you)
This is our Consolidation System:
http://img16.imageshack.us/img16/7546/xik1.jpg
You see what i mean in the read mark.
And here you can see our Prod System.. i cannot Assign here the Integration Server...
http://img14.imageshack.us/img14/4581/xip1g.jpg
Can you tell me whats wrong here?
Thanks
BjoernHi,
please check this threads, this may help you
Can not select Integration Server for Adapter Engine in File adapter
No Integration Server under Adapter Engine at Communication Channel config
Regards,
pradeep A. -
Unable to Find out Adapter Engine in the Communication Channel
Hi Experts,
I am Unable to select the Adapter Engine As Integration Server in the File Sender Communication Channel.
Please Let Me Know
Regards
KhannaHI Khanna
Check the SLD that Adapter Engine is insatlled and all the adapter has the metadata there.
Go to Transaction Code SXI_CACHE in the Inetgration Server(XI- ABAP stack) Then you can see the list of components.
Just have a look into Menu Bar - in there goto : GoTo->Adapter Engine Cache ( if the status is green - then it is correct-otherwise you need to refreshit.)
You just go thru mentioned document from service.sap.com/nw04
You will get the full info about that.
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
Just try with Visual Administrator to check the services for the adapter engine are running or not
All services starts with SAP XI..
SAP XI AF Core
SAP XI AF CPA Cache
SAP XI AF Messaging
SAP XI Adapter XI
SAP XI AF Security
Check SAP note on CPACache- 741214 and also 824236.
Let me know if any errors..
Cheers..
Vasu
<i>** Reward Points if found useful **</i> -
"Adapter Engine is missing in Communication Channel".
Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khannahi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you -
Hi all,
After transporting objects from Dev to Qa we are experiencing some problems:
1: in the "Component Moinitoring" of the RWB "Adapter Engine" is listed twice (under Integration Server).
2: In the communication channels the the drop down selection box where you choose "Adapter Engine" is empty.
3: The communication channels are not taking in data.
Please advice, ThanksHi all,
After removing and re-registering the Adapter Engine only one engine shows in technical systems in the SLD (instaed of two). - Thants good
But now i have an entry called "Domain Null" (type XI Domain).
What does this mean, and will this cause problems?
Thanks -
hi,
usually why we use , adapter engine - as integration engine? , and what are the other adapter engines available?
thanqThere are basically 3 engines in Integration server.
Adapter engine :Based upon Java stack and hosts all adapters except IDOC and HTTP
Integration engine:Based upon ABAP stack ,hosts IDOC and HTTP adapter and handles configuration steps like mapping,receiver determination,interface determination etc
Business process engine:BPM runs on Business process engine.
Each of the above three adapters do separate tasks and collectively come under Integration server
Thanx
Aamir -
Configuration Steps for Decentralized Adapter Engine
Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
PrasadPrasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana
Maybe you are looking for
-
Creating Parameters in RTF Template for BI Publisher Report
hi, I have created Parameters in my BI Publisher Report and in SQL query. But i need to create same parameters in RTF Template , so that when i publish this report in dashboard , parameters will be visible. Can you please tell me how to create Parame
-
Cannot print due to error message--printer working with Internet Explorer--How do I correct?
Last week printer worked fine with Firefox. This week a message comes back "an error occurred while printing". Printer works fine with Internet Explorer.
-
Clear up a registration problem with my license
I have the Adobe Creative Suite 5.5 Master Collection After my computer crashed Dell replaced the Mother Board, I reloaded the Operating System & the Adobe software. I received a message that my two licenses were taken & I had a 30 day free trial. I
-
I am trying to build a simple app with home page with a link to a page that has content presenter taskflow. If I navigate to the page with content presenter and click browser back button and then perform any operation, I see the following error : <Xm
-
What can I Sync using my Nokia e61 and Isync
Hi there Can I only sync contacts and Ical? I wanted to load some music and some pdf's onto the phone can I do this via the mac, or do I have to use the nokia cable and a PC? New to the E61 so keen to review what can be done with it and what cant - b