No Inter-VLAN, Just the Internet, Still Layer3 needed?

Question

Hi Guys,
If inter-VLAN communications is not required on a LAN, and clients at each VLAN just need outside (Internet) access, then do I still need to have a layer 3 device in my network?
To be more specific, wireless VLANs are going to be created on a WLC for a Hotel. There is no layer 3 device involved in the network. There is a gateway made by a company called SolutionIP which is used for Internet billing and management. The only reason that I'm creating wireless VLANs and AP groups is to break up broadcast domains because of the size of the network (122 APs and up to 2000 users). So actually there is no need for users on a building to communicate with users on another building. All they need is to connect to that gateway, pick up a connection in their browser, pay with the credit card and surf the Internet.
If the answer of the above question is "no", then what IP address should I use for the default gateway when I'm creating dynamic interfaces on the controller?
Regards,
Saman
Internet Billing and Management

Answer 1

You don't need routing on this deployment, APs can be contained within a VLAN and configure the WLC with an interface defined as AP management with a IP address.  You will need DHCP for this VLAN to serve the APs.
Configure multiple interfaces on the controller for clients, these can be configured to be a member of an interface-group, this interface-group is then mapped to the WLAN profile you create.  Users will then be dropped onto the interfaces in a round robin fashion, this way you can serve 1000 users with 4 subnets each of 250 addresses (Class C).  No requirement for routing or large CIDR (supernetted) addresses.  Each interface would need its own DHCP scope which can be done on the internal DHCP server on the WLC. 
As long as your default gateway device, in your case the SolutionIP can be configured with multiple VLANs and IP addresses so it can handle the different subnets then no problem.