NO Interface Mapping found in the Integration Directory (Configuration)

Hi,
I've got following problem with PI 7.0::
I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
- Sender Business System is a FTP Server, which contains the needed Sender Interface.
- Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
Thx in advance
Michael

Hi,
You must make sure that you have correctly identified the interfaces in your interface mapping.
1. Message Interfaces are correctly configured
2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
Otherwise, your interface mapping would not be found in the interface determination in Integration Directory.

Similar Messages

Value Mapping - Mass replication and Integration Directory interface

Hello all,
The following question is often approched in this forum but answer is never cleary provided. Thus I'm sorry to ask it again.
We are using Value Mapping mass data replication using special interface provided by XI. We can easily see results in cache using Cache Monitoring tool in RWB.
My question is :
Is it possible to see and then to maintain such data (mass replicated) using Integration directory (Tools > Value Mapping menu)
In this menu, we don't see our loaded data.
How to do this ?
Thanks a lot.

Hi Jean-Charles !
We also use VMR, and we find no way to access the cache data from Integration Directory. I think that by design this is not possible.
Value Mapping Replication for Mass Data
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
You cannot display the replicated value mapping data in the Integration Directory user interface (see Displaying/Editing the Value Mapping Table) since the original runtime data is stored in the application from which the data is copied. The value mappings created in this way using the user interface of the Integration Directory are just one of many possible sources of data.
Regards,
Matias.
ps: please award points if helpful

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

Error while importing the Integration Directory Objects

Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
Chandravadan

Hi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan

No service for system X client Y in the integration directory

Hi guys and gurus,
I've struggling with the following case for a couple of months (!!) and still I can not make it. I have to say that I am coming from the MM modules but trying to set up a ICH demo by myself during my spare time.
I send an idoc from R/3 to XI using program RSMIPROACT and I get message No service for system SAPR3I, client 800 in Integration directory. Even though, idoc has status 03 (Outbox).
- I have created a technical and business system.
- Connections work properly in SM59
- Port XIDOCPORT with RFC XIDCLNT100 maintained txn WE21
- Partner XIDCLNT100 (LS) with Outbound parameter:
Idoc name - Port created. txn WE20.
- IDX1 maintained in XI system.
Is there something missing?
This is my first post but points rewarded if somebody takes me out of this hole.
Thanks,
Ivan.
key words: ICH, Note 940313 IDoc adapter: Error messages in SM58, <a href="https://service.sap.com/sap/support/notes/940313">Idoc Adapter : Error Messages in SM58</a>, No service for system SAPABC client 123 in the integration directory,

Hi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar

List of unnassigned objects in the integration directory

Hi! Hope this is an easy question. Does anyone know of a way to get a list of all objects - party, service, rec det etc... - that are not assigned to a Config Scenario in the integration directory. Need to do a cleanup and wants to avoid going object by object to get the list. Thx, Duncan

Thanks for the replies. The objects tab shows me all objects. I need to see only those not assigned to a CS. How can I do that there?
The where used option requires me to go trhough every object (1000+) and check one by one. That is what I am trying to avoid.
Ideas? Thx, Duncan

Party in the Integration Directory

Hi,
Why do we need to create a party in the Integration Directory? What is the use of it.
Also, the SAP help asks us to create Business service without a party while BPM. Why?
Priya

Hi,
I would recommend you to read this link:
http://help.sap.com/saphelp_nw04/helpdata/en/87/1d6e3fefa13042e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/4f2c41c684de2be10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/da/7a2f41b239a831e10000000a1550b0/content.htm
Regards
Suraj
Message was edited by:
S.R.Suraj

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
 <information>
 <title>Integration Builder</title>
 <vendor>SAP AG</vendor>
 <homepage href="http://www.sap.com" />
 <description type="one-line">Directory</description>
 <description type="short">Directory</description>
 <description type="tooltip">Directory</description>
 <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
 <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
 </information>
 <security>
 <all-permissions />
 </security>
 <resources>
 <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
 <jar href="directory/aii_ibdir_client.jar" />
 <jar href="directory/aii_ibdir_core.jar" />
 <jar href="directory/aii_ibdir_sbeans.jar" />
 <jar href="directory/aii_ibdir_rb.jar" />
 <jar href="directory/aii_ib_client.jar" />
 <jar href="directory/aii_ib_core.jar" />
 <jar href="directory/aii_ib_sbeans.jar" />
 <jar href="directory/aii_ib_rb.jar" />
 <jar href="directory/aii_util_icons.jar" />
 <jar href="directory/aii_util_swing.jar" />
 <jar href="directory/aii_util_xml.jar" />
 <jar href="directory/aii_util_xsd.jar" />
 <jar href="directory/aii_utilxi_misc.jar" />
 <jar href="directory/aii_util_rb.jar" />
 <jar href="directory/clientaii_ib_sbeans.jar" />
 <jar href="directory/clientaii_ibdir_sbeans.jar" />
 <jar href="directory/frog.jar" />
 <jar href="directory/focus14.jar" />
 <jar href="directory/sapxmltoolkit.jar" />
 <jar href="directory/jta.jar" />
 <jar href="directory/ejb20.jar" />
 <jar href="directory/exception.jar" />
 <jar href="directory/logging.jar" />
 <jar href="directory/guidgenerator.jar" />
 <jar href="directory/jperflib.jar" />
 <jar href="directory/sapni.jar" />
 <jar href="directory/sapj2eeclient.jar" />
 <property name="sap.theme" value="Streamline" />
 <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
 <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
 <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
 <argument>webstart</argument>
 </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
*******************Reward,if found useful
Edited by: BVS on May 7, 2008 3:01 PM

Integration Directory configurations for IDOC - XI - File

Hi all,
I have a scenario as above: IDOC-XI-FILE
The IDOCs come from an R/3 system - NHGDDBS01.
I've configured 2 BS:
1) BS_NHGDDBS01
-> TS: NHGDDBS01, type: WebAS ABAP
-> SWCV: BASIS 6.20
2) BS_DEV1_NAUTICUS_OOTS
-> TS: TS_DEV1_NAUTICUS_OOTS, type:Third Party.
-> SWCV: SWCV_DEV1_NAUTICUS_OOTS, type: Third Party
-> PDT: PDT_NAUTICUS_OOTS
With this setup, can someone help me by showing me how to configure the Integration Directory in order to receive IDoc from R/3 (nhgddbs01)?
Please help.
Thanks.
Ron

> This is known issue.....Check the below
> steps.............
>
> Go to XI system ->and IDX1 transaction.. And check
> the port number + RFC destination is given correctly.
> this should point to SAP system ..
> Check thsi RFC destination is having all the entires
> and test connection success
>
> And the port should have the naming convention
> SAP<System Id>.
>
> ........................Check this SAP Note -940313
Hi,
I followed the SAP Note.
The SAP System ID is DV1.
I've configured IDX1 with the following port:
Port: SAPDV1
Client:108
Description: <blank>
RFC_Destination: PI_001 (This RFC destination points to DV1, despite the naming. Connection test is successful)
I recreated metadata on IDX2:
IDoc Types: ZPATINFO
Source Port: SAPDV1
IDoc Types: ZADMINFO
Source Port: SAPDV1
However, when I test the message from R/3 using WE17, SM58 on R/3 it's still showing the error:
Transaction IDX1: Port SAPDV1_108, client 108, RFC Destination error.
May I know where did this error occur and how to rectify this?
Please advise.
Thanks.
Ron

Testing Config in ID but no Interface mapping found!

Hi,
I am testing configurations I have done in ID and it went all successfully but with one error stating "Interface mapping not found , Runtime error
Unable to read payload from the message object"
after going through some links in SDN ....
I did check the Interface mapping is active and the exact one used in the config.
and did all the chache refreshes in SXI_CACHE and Administration in te main menu of XI start page ,bbut no use.
in SM59 I checked INTEGRATION_DIRECTORY_HMI connection and I got
"Http : 500
Status Tex: Internal Server Error",
i understood from sdn links and readyness check check guide this is not a problem.
so what might be the cause?
thank you.
Babu

Satish,
i got doubt ,do you think this is not a problem/
in SM59 I checked INTEGRATION_DIRECTORY_HMI connection and I got
"Http : 500
Status Tex: Internal Server Error",
cos,thats how communication happens between IR and Id right?if there is any error in INTEGRATION_DIRECTORY_HMI connection,I think it might be an issue,but readiness check guide says ok ,in the guide it has not been mentioned that "internal server error is OK""
any comments?
thx

Error in XSLT mapping TEST in the Integration Repository?

Hi,
I try to use imported .xsl file for mapping. I have configured the interface mapping using this .xsl file for transformation. But when I try to test the transformation in the TEST (bookmark), it returns as the result the same .xsl - the stylesheet!
Is it a bug?
Thanx, Peter

What more, it doesn't work so only in the test... I used this transformation in the BPM process and it has produced the stylesheet as the result of the transformation... It doesn't seem as a bug...
What is wrong?
...one more thing: detailed log of the transformation in the TEST shows NO WARNING!

I can't be found in the Skype Directory

Why am I not in the skype directory? No one is able to find me using my skype name, real name or email address......

Just to confirm if one of your friends can search your Skype Name/ Skype ID on Skype Directory?
Note: You won't be able to search your own Skype Name/ Skype ID on Skype Directory.
Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time.
If you found my post useful, please give "Kudos".
If it helped to answer your problem/question, please mark it as "Accepted Solution" so other people can find it easily.

Error in the Integration Directory

Hi All,
In ID When I Go for Environment-->>Cache Notifications
I Got the Following Error
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
Please Resolve this Issue
Regards
Khanna

Hi Navadeep,
I Checked With All PI* Users, None of them are Locked.
In The Runtime Workbench Component Monitoring-->> All Components AE, SLD,IR , ID, RTW, Are in the Green State Only.
Here If I Clicked on the Cache Connectivity Test Means It's Giving Error.
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Please let me Know
Regards
Khanna

Ejbc found errors (The filename,directory name or volume syntax is incorrect

hi ^^
i did like this to deploy test bean..
java -classpath %CLASSPATH% -Dweblogic.home=%WL_HOME% weblogic.ejbc -compiler javac
build\std_ejb_%BEAN_NAME%.jar %MYSERVER%\ejb_%BEAN_NAME%.jar
ERROR: Error from ejbc: D:\temp\ejbcgen\Files\JavaSoft\JRE\1\3\1_03\lib\rt\jar;C
:\ProgramAD.ser (The filename,directory name or volume syntax is incorrect )
helpful somedody said "this is bug so you must upgrage to 6.x"
but myfriend is using well 5.1 on linux2.4 (me : window2000 pro)
thank very much..

Hi seethesh,
The classpath in my system is :
CLASSPATH=d:\jdk1.2.2\bin\;d:\jdk1.2.2\lib\;d:\jdk1.2.2\lib\servlet.jar;.;d:
\j2sdk1.4.0\bin\;d:\j2sdk1.4.0\lib\;.;d:\weblogic
\classes\;d:\weblogic\lib\weblogicaux.jar\;.;
i do not have a rt.jar in my jdk...
Please reply soon.....
Thanks,
Anitha.

Layout found in the VIDEO_TS directory is not a DVD-Video file...etc.

Hi all, I am struggling to get a project finished and really need some help after trawling the net without winning.
I can "Build" my project to a folder with Audio_TS and Video_TS files without errors (it's a dual-layer project, by the way), but when I burn the VIDEO_TS files in Toast, the finished DVD won't play as it should in a DVD player. Nothing like in the simulation, which plays fine, buy the way...
When I burn from inside DVDSP, I get the error message:
"The file 'CIRCUSOFMYSTERY.layout found in the VIDEO_TS folder is not a DVD-Video file and will not be included in the final disc or DLT"
and, directly underneath is:
"The file 'VOB_DATA.LAY'.layout found in the VIDEO_TS folder is not a DVD-Video file and will not be included in the final disc or DLT"
...so I gather these errors are causing the playback error...
The problem is displayed thus:
When the disc is inserted, the short video I have set as a first-play does not play, in fact nothing happens. When I hit the DVD player's PLAY button, the main track plays and the menu is not shown at all.
If someone could offer some assistance I would certainly appreciate it.
Cheers.
Spookola.

The messages are not errors.
They are for information only -it is just telling you that those files will not be in the final DVD because the finished disc doesn't need them, nor would they serve any useful purpose if retained.
The Build folder does need them though, which is why it is listed as a "warning". I find that "warning" is a little exaggerated -"attention" would probably be a better choice. If those items are removed, running the build command again will recreate them.
Your issue might be a setting in Toast. Before you burn the img file, test it in Mac OS X's built in DVD Player. Mount the image in the Finder and in DVD Player, go to File > Open DVD Media.

NO Interface Mapping found in the Integration Directory (Configuration)

Similar Messages

Maybe you are looking for