No interfaces recognized on C2801

When I boot C2801 router, it displays message :
*May 19 10:08:53.983: %PA-3-PACREATE: Unable to create driver for Port Adaptor type 65535 in bay 0
After booting is complete, I can not see any interface (no built-in Ethernet, no serial on WIC-2A/S).
I suspect what some information has been erased from internal bootflash. Have I any chance to recover ?

Removing all installed modules had no effect.
This problem occured after I replaced original Cisco CF card with 1GB SanDisk CF. In my opinion in this moment something was accidentally rewritten in internal router flash. Changing CF back to original card with previously functional IOS did not resolve this problem.
I have second C2801 box, where I also replaced CF with the same SanDisk card, and all is functioning correctly.
Here are outputs from non-functional box:
Router#sh hardware
Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.3(8)T11, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 10-Aug-05 19:24 by dchih
ROM: System Bootstrap, Version 12.4(13r)T5, RELEASE SOFTWARE (fc1)
Router uptime is 8 minutes
System returned to ROM by power-on
System image file is "flash:c2801-ipbase-mz.123-8.T11.bin"
cisco 2801 (revision 0.0) with 118784K/12288K bytes of memory.
Processor board ID
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x3922
Router#sh diag
Router#

Similar Messages

Audio Interface Recognized, then Immediately Dropping

Hello all. This is my first post on here and I'm hoping I could get some solid advice.
I'm using Logic Pro 8 for live recording and my computer meets all required specifications. We use a TASCAM-1641 USB audio interface for our recording.
Sometimes Logic recognizes my interface and we get through an entire night of recording. However, a majority of the time the software recognizes the interface when I power it up. I the select the interface in Core Audio, and then about 20 seconds later I get a message stating: Logic can no longer detect the US-1641. Switching to default setting.
No matter if I reboot the computer, restart the program, create new song, etc., the problem does not resolve.
Does anyone know what could case this "drop" of the interface? After this happens, my friend switches in his computer with GarageBand and it's good to go, so it's definitely not the USB cable or the interface. It has to be some audio setting on my laptop or soething with Logic.
Thanks in advance for the help.

I have a feeling that the ports on your laptop may not be USB 2, just regular USB. That appears to be the case with my 2007 MacBook Pro. If you look at System Profiler, the only high speed USB port is the one used internally by the built-in webcam.
I don't know which Mac laptop you have; if it's a regular MacBook then you're SOL, but if it has a PC or Expresscard slot then you could use something like this:
http://www.sonnettech.com/product/fwusbexpresscard34.html
(Sonnet tends to be expensive - you'd want to shop around.)
If my theory is correct AND if you have a MacBook with no card slot, your only option is to put your interface on ebay and buy a FireWire one. But I don't know that my theory is correct - it's just an educated guess.

Wireless recognized during install but not after

Hi guys,
I just installed Archlinux using my wireless network (i've installed ANYTHING, no drivers, no firmwares). Everything gone fine but after the installation I rebooted my system and... SURPRISE! The system couldn't bring up the wlan0 interface (recognized by ifconfig -a) because of: SIOCSIFFLAGS: No such file or directory
So after investigating, I found that I need the ralink driver. In fact, I've downloaded it and putted in /lib/firmware
Now I can bring up my IF but when I use THE SAME wpa_supplicant.conf file used during install, nothing, it doesn't work.
If you need more details tell me, but first of all... WHY during the install everything went fine and after no?! Is it a bit strange... no?
Thanks all
(using Archlinux x64 on Acer 5735z)

At least for rt2870sta, it's a retarded bug in Linux that was introduced in 2.6.31 and is still not fixed. It works in the live environment because it has an older kernel.
Kernel 2.6.31 module conflicts
The 2.6.31 kernel caused the rt2870 driver to conflict with other wireless modules. The fix in this thread says that you need to blacklist the rt2800usb rt2x00usb and rt2x00lib modules by modifying the MODULES array in /etc/rc.conf
MODULES=( ... !rt2800usb !rt2x00usb !rt2x00lib ... )

My iPad Air 2 is no longer recognizing my audio interface when I connect.

Basically I am using the camera connection kit to connect to my korg kronos keyboard, which has an audio interface. The couple times that I did this before, it worked. Sound from the iPad was routed to my monitor via the Kronos interface. I don't know what happened but I didn't use it for a week and ever since then when I connect the sound only comes through my iPad. I used to be able to use the Kronos As midi device to control my music apps but even that functionality doesn't work anymore.
ive tried doing a hard reset several times and in several combinations with the Kronos...such as powering both on at the same time but no luck.
the kronos works perfectly when I connect it to my laptop, so I'm convinced it's an issue with the iPad. When I plug the iPad to my computer it is recognized...so it can't be the connection port that is faulty.
THe kronos is the only class compliant device I have to test it on and have been unlucky so far.
ANy help?

Try doing a hard reset on the iPad. You can also check if your iPad needs to be updated too.
To update go to Settings - General - Software Update
To do a hard reset, i would suggest you do a back up first, either on iCloud or via iTunes.
First try shutting down the device off and on, if that does not help, then you can go ahead and do the hard reset.
Hard Resetting your device.
On your iPad, press and hold both the SLEEP/WAKE button and the HOME button for about ten (10) seconds. After ten seconds you should see the Apple logo showing up, you can then release your fingers from those buttons. Wait for your iPad to turn up completely, then try connecting your projector again to see if it works. I hope it does. Please let me know if you need any further assistance.

My older iPod is not recognized by cars with a newer iPod interface

And my new iPod Classic is not recognized by cars with the older interface.
I purchased a new iPod when I realized my new car wouldn't wouldn't recognize my older iPod. Now I find my two older cars won't recognize the new device. Is there an interface cable adapter out there anywhere?

The Jaguar there is nothing you can do, and the new interface from the dealer are not compatible
For the BMW, you have to find out what brand interface was installed in the vehicle
can be dension or original BMW in the x5, if dension you can get something call
Scosche passPORT if BMW brand you can get a new cable from Bmw with the usb and dual power supply,
In the Mini if DIce brand you will need a new cable or new iPod interface, now they have a usb plug to do updates in case iPhone 5 is release in the future or any other updates from iTunes
http://www.oemautosound.com/pc-457-164-dice-i-bmw-t5v-mini-cooper-2002-2008-to-i pod-text-ready.aspx

Usb audio interface isn't recognized by mac os 10.4.11 after reconnecting

Hi,
I use the native instruments audio 8 dj interface (1.2.0.020, driver 2.3.5, FW 23) with my macbook pro (mac os 10.4.11).
The audio 8 dj is only recognized by it's control panel when it's connected to the notebook via usb before the notebook is started.
When the notebook is already up and running and you connect the audio 8 dj it's not recognized by the notebook.
Also when you disconnect and reconnect the usb cable while the notebook is running the audio 8 dj is not recognized any more, although in all cases the usb led of the audio 8 dj is steady green.
Does anybody know which could be the reason for this problem?
If you need further information please let me know.
Best Regards,
Thorsten

I'm having the same problem on my new MacBook Pro 13", but in my case the issue is with a Sennheiser USB adapter (modelno UUSB2) that I use for my headset.
It's very annoying having to reboot each time I would disconnect and reconnect the device!
The Sennheiser adapter works fine on my older MacBook Pro 15", so it's not an hardware issue with the adapter itself. I've tried resetting the SMC and PRAM to no avail. Sennheiser does not provide any drivers, so it's not a third party driver-issue either. I've tried clean re-install of the OS as well without any luck.
The log-messages from Console.app start notifying me about this when I try to re-connect the device:
17.09.09 22.11.28 kernel USBF: 4037.829 AppleUSBOHCI[0x702a800]::Found a transaction which hasn't moved in 5 seconds on bus 0x6, timing out! (Addr: 0, EP: 0)
17.09.09 22.11.28 kernel USBF: 4037.928 [0x70f9600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x6000000)
17.09.09 22.11.34 kernel USBF: 4043.829 AppleUSBOHCI[0x702a800]::Found a transaction which hasn't moved in 5 seconds on bus 0x6, timing out! (Addr: 0, EP: 0)
17.09.09 22.11.40 kernel USBF: 4049.830 AppleUSBOHCI[0x702a800]::Found a transaction which hasn't moved in 5 seconds on bus 0x6, timing out! (Addr: 0, EP: 0)
17.09.09 22.11.46 kernel USBF: 4055.830 AppleUSBOHCI[0x702a800]::Found a transaction which hasn't moved in 5 seconds on bus 0x6, timing out! (Addr: 0, EP: 0)
17.09.09 22.11.48 kernel USBF: 4058.330 [0x70f9600] The IOUSBFamily was not able to enumerate a device.

Why isn't my Roland FA-66 Audio Interface being recognized?

I'm trying to setup my Roland FA-66 "Cakewalk" so I can record some stuff, but it isn't being recognized by my iMac.
It is plugged in with a Firewire cable and I have everything on the device setup properly. But my Mac itself isn't recognizing the device.
Just a few notes:
Mid-2010 iMac with an i3 processor
Audio Interface is a Roland FA-66 CAKEWALK, not EDIROL
Trying to record into Garageband
Connected with a Firewire cable
Cheers

I know it supports Snow Leopard because I've used it before with Snow Leopard. It doesn't require any drivers to be installed. I just recently downgraded back to Snow Leopard from Mavericks, thats why.

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Hello, I just wanted to know when an update would be available for my mac mini server os x lion to resolve the issues regarding my m-audio fastrack pro usb audio interface (no midi messages recognized)

Have you reported your problems to Apple?
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
And/Or
Mac OS X Feedback<http://www.apple.com/feedback/macosx.html>

Interface not recognized

Hello!I have an iMac (Version10.6.8) and i've been using it with a M-audio fast track ultra interface,since i updated the iMac,the interface was not recognized by the iMac,i've tried all the drivers for this version i found, but it's still the same,any help?Thanks!

Hey bro -- I am probably a minority here in my complete dislike and distrust of MOTU products, but the same thing happened to me when I bought an 8pre -- it just stopped functioning and no one, at MOTU or anywhere, could figure out why. (And even when it did work it was sort of klugey). Luckily I was able to return it. Recently had a similar crap situation with a MOTU fastlane MIDI/USB interface: downloaded the most current drivers from MOTUs site and it stubbornly refused to appear. Returned it an bought and Edirol, which I had up and running, and connected a MCU to, in minutes.
All I could recommend is check their web site and see if there are new drivers. Or leave a message with their rech support via the site -- they do respond, eventually (within 48 hours in my experience).
Good luck.

MIDI interface not recognized after Mavericks install

Hi,
I was using a Midisport UNO with OSX 10.6, connecting my keyboard with the Mac Pro and using programs such as Live and Garageband. After the Mavericks install, I have a bunch of obsoleted hardware. I understand that Midisport have not come up with a driver to support Mavericks just yet. But that is not my issue.
Today, I purchased a new MIDI interface, one that is class compliant and so requires no driver software. According to everything that I have read, from external literature to the interface's literature, the device should work just fine. But my Mac Pro doesn't recognize the device in the Audio and MIDI Setup utility. In fact, it recognizes the Midisport UNO just fine but that device is greyed out and I guess this means there is no correct driver.
I have noticed that the Mac Pro seems to turn off ports when supplying power to USB devices. Sometimes, the front USB ports will not connect my iPhone to iTunes, for example. When I restart, the power sometimes returns. So is this a power issue or does my connectivity problem lie with the MIDI interface?
Thank you

I just purchased a new iMac running Mavericks. I have an M-Audio Keystation 49e, I have the same issue. It won't work or be recognized in adui/midi setup. It is there, just greyed out. I have searched everywhere for a fix. All you find is delete this, delete that. It worked fine on Mountain Lion, now it is useless to me. I have tried running it through a hub, doesn't fix the issue. I use power as opposed to just the USB, doesn't fix the issue. Can someone please point us in the right direction so we don't have to go spend more money on a midi keyboard because of Mavericks?

Yamaha p200+motu fastlane midi interface=GB not recognizing midi device =0(

tried hooking up my motu fastlane midi interface to my yamaha p200 and to my mac mini for use in garageband. GB is not recognizing a midi interface. i read elsewhere that i may need a driver, but would it be for the yamaha p200 (keyboard) or the motu fastlane midi interface? or is it a driver for garageband??
please help!!

You need Motu's midi driver...Go to their site for the current version...in the Downloads section.
You will need to log-in or register if you haven't already.
Once installed and restarted you need to set up your midi connection in Apple's: Audio Midi Setup utility and connect the Fastlane to the Yamaha...
Link here if helpful:
http://www.showmeprotools.com/apple-ams-audio-midi-setup-for-pro-tools/
Just imagine the Pro-Tools interface is the Fastlane...
Typically the manufacturer model and names are no longer supplied in the Properties window. You can enter whatever names you want in that section. It doesn't matter. So don't worry if it's blank or not as shown in the link.
If you want to use the internal sounds of the P200 then you will need to use the analog output connections from the P200 into the analog inputs of an audio interface...using a real instrument track.

Cisco 1702i WAP: how to get an interface in a non-native bridge group/ VLAN to be recognized by the internal DHCP server

Does anyone know how the internal DHCP server in these access points connects to virtual interfaces and bridges in the unit?
Is there some sort of default connection that connects the DHCP server to the native bridge group or VLAN?
In a test case, with an SSID in the native VLAN and bridge group, the 1702i serves an IP address to a wireless client no problem. But with a second SSID in a non native VLAN and bridge group, no IP gets served. My only guess is that since the bvi1 defaults to the native bridge group and VLAN, sub-interfaces also in this group are assumed to be in the same subnet as bvi1, or in this case:
interface bvi1
ip address 192.168.1.205 255.255.255.0
no ip route-cache
exit
It would be the ..1. subnet.
Since the dhcp pool is set as:
ip dhcp pool GeneralWiFi
network 192.168.1.0 255.255.255.0
lease 1
default-router 192.168.1.1
dns-server 8.8.8.8
exit
There may be an assumption that anything bvi1 can talk to is in the ..1. subnet, so the above pool gets activated on a request coming through bvi1.
Is the DHCP server just hanging out waiting for a request from an "area" that is assumed to be on the same subnet as the given pool?
Do I need to somehow show the device what subnet the 2nd SSID/ subinterfaces are in so the internal DHCP server can decide it needs to go to work, or is there some sort of bridging between the DHCP server and the interfaces that needs to be done? I am trying to use the same DHCP pool for the second subnet at this point, since I assume I will need another router to service an additional subnet and DHCP pool.

Keep in mind that DHCP is a broadcast packet to start. So the AP can only listen in the subnet that it has an IP address for.
Now, for any other subnet you can use the AP for DHCP but you have to have an IP helper address on your L3 pointing back to the AP.
That being said, I wouldn't use the DHCP server on the AP as it is limited. You'd be better off using a Microsoft server or some other device that is designed for DHCP.
HTH,
Steve

After installing 11.2.2.3 iPod Classc. is wiped/"dead" (not recognized by iTunes, Win7 find the unit in explorer) and my iPod Touch refuse to comm with iPod interface in the car. Just wait for a iTunes update?

Hi,
I installed 11.2.2.3 2 days ago and have since then not been able to sync my iPod Classic (not recognized by iTunes anymore and alll data has been wiped but show up in Win explorer when in Disk mode with my label on it "Nik's iPod") my old iPod Touch appear to have all data left but doesn't communicate with my car anymore.
Nedless to say none of the other Apple devices in our house will be updated or connected until this is resolved.
Is this related to the iTunes update?
If so should I just wait for a new update to come out that can help me get these things sorted?
I have tried most of the different remedies listed in this forum to no avail and being computer illiterate (not comepletely but anyway) I just want to know if this is a known problem that I can successfully fix with a bit of fiddling or if its time to seek out a genius bar somewhere and get some help.
Nik

Hi Jeff,
Thanks for the help but I am unfortunately still not able to get my iPod Classic to connect. I have tried all the tricks in the article that you linked to.
One thing is that when I reset the iPod (menu and center until the logo pops up) I get a critical error in iTunes and it shuts down. Could that indicate that my problem is with the iTunes installation rather than the iPod?
I have tried to re-install iTunes before but maybe I shpuld give it a go again?
Brgds,
Nik

Thunderbolt firewire shows in network screen as not connected. how do i connect this so my audio interface is recognized?

am trying to get imac to recognize audio interface so i can record thru my presonus. i remember having problem with macmini and had to set up an aggregate device. right now only built in mic shows in GB thanks

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

No interfaces recognized on C2801

Similar Messages

Maybe you are looking for