No Internet Access after 20 minutes in the router Linksys E2500

Hi,
I have a new Linksys E2500 router. Whenever I try to connect to the internet, it works only for 20 minutes. This problem started 15 days ago. At the first time, the problem was with the Internet Service Company, " Comcast ". After they had fixed the problem, the internet worked only by a direct  wired connection between the mofem and the laptop. But when I connect the modem to the router, the internet works only for 20 - 30 minutes. Knowing that I tried  the following: 1 - to use wo  different laptops ( windows 7, and windows 8 ); 2 -  to use  differenet DSL cables; 3- to power down the modem , the  router, and the  laptop , then I turned them on in that order, but the problem is still existed.
Have any one faced this complicated problem before ? Please help me .
Spoiler (Highlight to read)

@alimil,
I agree with jibjib. Changing the local IP address of the router may help resolve the issue specially if your modem is a gateway.. Aside from that, check the firmware of your router. Upgrade the firmware if it’s not the latest. Click this LINK for the latest firmware. Cloning the LAN mac address of the computer that’s able to go online with your modem can also fix the issue.
Try to do these steps…
Connect a computer to the modem and make sure it’s able to get online.
Once the computer is online, disconnect the computer from the modem and connect the computer to one of the numbered ports of the router (ex.Port #4).
Clone the LAN’s mac address of the computer. Click this LINK on how to do it.
After cloning the mac address, connect the modem to the internet port of the router.
Check the status page of the router if you have an internet IP address. If you have an internet IP, try to go online with your computer
If the computer is online with wired connection, proceed with wireless configuration.
If not online, restart your computer
Goodluck….

Similar Messages

  • My TC has been working fine. Using WIFI my iMac, ipod touch were able to access the internet. Last night, no internet access and when I plug the router connection in my Mac all is good.

    My TC was fine, it supports a Mac and an ipod touch. I have had no issues until last night. Nominternet access, Timecapsule app cannot detect or finf the TC. I have my router cable plugged into my Mac and it's fine. I am using Leopard and have no idea what TC firmware version I am on. The TC does get hot! Any clues?

    Firmware downgrade.
    Go to the airport menu at the top of the page when you have airport utility open.
    The second screen will open over the airport utility.
    Now hold down the option key when you select firmware so not just new ones open but also old ones.
    You get a warning ..
    You proceed.
    Now you have your TC with whatever firmware you chose.
    That is about as Gumpy as I can do it.

  • No internet access after hard reset.

    I hit the hard reset button on my router and now my computer & other devices can not access the internet. I can connect to my router but have no internet. It was working fine earlier today until it was hard reseted.
    I ran windows troublshoot and I got: 'The network gateway is accessible, but Windows couldn't receive network traffic from the internet."
    Solved!
    Go to Solution.

    All my devices finally gained internet access after again hard reseting my router and then power cycling my modem, router, and pc. Thanks Eddie 956for not giving up on yourself! 

  • No internet access after bootup on some clients.

    Hi,
    Some of our client pc's do not have internet access after bootup in the morning. The quick solution is to login as administrator disable & re-enable the network adapter and than everything is fine for a few more days. There is nothing showing up in the
    event viewer and it doesn't always happen. 
    Can anyone advise on how best to track down the problem?
    Thanks.

    Cheers, I noticed that the DHCP role is installed but the service has stopped. When I start it, it stopped straight away.
    I think that's because the router has an ip address of 192.168.0.1 and sbs server currently has an ip address of 192.168.0.10. Do I have to change the router ip address to something else and set the server to 192.168.0.1?

  • No internet access after 7.2.1 Firmware Update

    I can not get internet access after performing this Firmware Update. I have a green light on my Airport Extreme, and in the System Preferences Network pane it states that I am connected to the internet via Airport. Has anyone else had this problem and been able to resolve it?
    I have a cable modem and have reset it several times. I have also uploaded the firmware update again. I've tried to go back to the previous version of the firmware but it does not seem to be available anywhere, and does not show up as an option in the Airport Utility using Manual Set Up option.

    I have the same problem. ATT DSL modem. Updated my firmware and lost all connectivity. If I bypass the AEBS, it works just fine. Also lost my Apple TV in iTunes after the update. Frustrating!
    Let me know if you figure it out.

  • If I own Photoshop Elements 5.0 on an old computer without internet access, how do I open the image

    If I have Photoshop Elements 5.0 on an old computer without internet access, how can I open the image I created so I can print it?  The new computer with internet is not the one I have registered the Photoshop product.
    Thanks.
    Eddie

    Hi eddie
      If you saved the image on the old computer as a project or a PSD file it will only open in Elements. The best thing to do is make another copy and then transfer it to the flash drive.
    If you open the saved collage in the PSE5 Editor you can click the top menu Layer à Flatten Image
    Then click File à Save As and choose jpeg.
    Copy the jpeg to the flash drive and then plug it into the new computer and drag the jpeg collage to Pictures or another folder.

  • HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

  • HT201320 I cannot send email. I have internet access. What could be the problem?

    I cannot send email. I have internet access. What could be the problem?

    Hello, ootytooty. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend going through when experiencing issues with mail.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Cheers,
    Jason H.

  • When i want to access in web base utility the router reboot

    i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot
    info:
    led power is on stable
    led lan is on
    led wlan on  and the access point work
    1.http:\\192.168.1.1
    2.enter user name and password (admin,admin)
    3.hir the page begin to get  after a few second  the router reboot
    Page cannot be displayed completelty
    i try :
    - simple reset
    -(30/30/30) reset and i enter in managment mode firmware upgrade
    i don't try hardware reset 
    thank you for help
    Solved!
    Go to Solution.

    i found it 
    when the  router reboot  don't quit page of management mode and not refreash it  put your firmware and upgrade
    the router after few minutes displyed "susseful" 
    enter 192.168.1.1 and username/password "admin/admin" and the page opened without a router  reboot
    thank you for all

  • How to access to configuration page of the router through the windows phone 7 ?

    Hi all
    I'd like to know if there's a way to access to configuration page of the router through my windows phone 7.
    I usually access the router by laptop as following: "192.168.1.1". but sometimes when I'm on my phone  I need to reboot the router through my phone other then the laptop which is not near me...
    I looked up for applications that should do the work, but unfortunately I got no positive result, so I'm reaching out to this very forum in order to find help and tricks so that I can figure it out
    thank you in advance

    Hi Happydz,
    For help using Windows Phone please post in the Windows Phone forums on
    http://answers.microsoft.com .
    The MSDN Windows Phone Development forums are for developers to discuss writing their own Windows Phone apps.
    That said, I'd expect you could connect to 192.168.1.1 from the phone's browser the same way you would from the laptop's browser.

  • I lose my internet connection after 5+ minutes-must restart to get it back

    In the past day or two when I use the internet with my MacBook Pro-13" running Snow Leopard 10.6.4 I suddenly realize after 5-25 minutes that I am no longer connected to the internet. (I have 2 Internet Service Providers in my home-office setup)
    This occurs when I am using either of the ISP's: VOO or BELGACOM; and it occurs if I am using via ethernet cable (primarily VOO) or WiFi (primarily BELGACOM). But it fails with wireless VOO and wired Belgacom, too.
    Suddenly I see that my WeatherDock 2 is not updating or I check the weather somewhere else or I'm going to a new page in Safari and it just has a white page for a long time and I know the internet is GONE. Sometimes the NETWORK Preference panel still tells me I'm connected (wired LAN type); although generally when it is via wireless it turns to the red dot and tells me I am not connected.
    With Wireless if I try to reconnect, often it brings up the WPA password box - but it never connects.
    Logging-out and loggin-in does NOT work; neither does sleep and waking from sleep.
    But if I do a restart- automatically my preferred WiFi server is working great - but for how long? Generally 10-20 minutes then gone...
    HELP - this is a relatively recent problem (last few days) - and a nightmare - can't get anything done!
    GLAD I SAVED THIS BECAUSE I CANNOT SEND IT - AFTER JUST 5 MNUTES THE NETWORK CONNECTION IS GONE AND I HAD TO RESTART-- Hopefully this gets sent.
    Best regards,
    Steve Schulte
    Saturday 9 October 2010

    Thanks and I shall be trying these things - plus perhaps a new router (I have 2 now, and will try to just use the newest one - eventually might get an 8 port out as I have 2-3 computers plus 2 printers...)
    Since I have 2 different ISP's (VOO and BELGACOM) I make sure to turn-off the one (unplug or if WiFi just turn-off WiFi). The eMac does NOT have WiFi.
    The Belgacom modem has its own built-in WiFi - again the eMac cannot access that - other than via the PBG4 accessing that WiFi and the eMac connected to the PBG4 via FireWire 400 cable for internet access. That works and doesn't seem to cut-out.
    I'll follow your other hints-- no "MINI" involved - just an eMac 2005 without WiFi and a PBG4 and my MacBook Pro-13" mid 2010 (and that seems to have a HD problem...)
    I'm not sure how to "RELEASE AND RENEW" my IP address. Also not sure how to access the router LOGs.
    DI-604 router is at least 6 years old---
    Thanks for any reply - hope to get back to this later today -
    regards,
    Steve
    Wednesday 13 October 2010

  • Why no internet access after Safari reinstallation (router does)?

    Since yesterday I have a massive problem I hope someone can help me out.
    To start with I couldn´t email attachments since a few months. Yesterday I thought a re-installation of Safari (browser recommended by the provider) might cure that as I thought recent upgrades (recommended by apple to install) caused that problem which was not there last year.
    So I downloaded Safari from apple.com. From that on I can´t get any internet access anymore (only a few minutes after the first start, then never again), even after spending 40 minutes on my providers extremely expensive hotline no solution (other than that the friendly lady told me to contact this forum). My router has internet access, and the cable between router and my Mac is definetely fine, but when I open the internet-access window, the connection immiadetely crashes always.
    I checked network utilities and found no failure, I tried different ways of access via the network settings, nothing works. I assume it has something to do with the re-installation of Safari, but why on earth should the standard Safari 1.2-version from Apples own website create such a mess?
    Shall I install firefox? Shall I dump the Safari-version installed yesterday and install a copy of the updated version from my office computer instead? What else could cause the problem? Are my network settings wrong? Should I log in via "manual" or DHCP (the provoders hotline told me I should re-type PPP settings. Though that is clearly to see a no-option with Ethernet she kept telling me so. Isn´t PPP only for modem-connection?), or via PPoE? Or shall I re-install the router?
    I would be more than glad if someone could help me.
    I-Mac 20"   Mac OS X (10.3.2)  
    I-Mac 20"   Mac OS X (10.3.2)  

    We can keep it in English as its an english speaking forum and therefore non-germans who might have the same problem could participate. If for you German is better I´m fine with it. Most settings on my Mac are in German so if it becomes too specific, german is anyway necessary.
    Thanks,
    Nobbi

  • No Internet access after setting up time capsule

    I am setting an airport time capsule. After setting up new network, I no longer have Internet access and can not set up the time capsule. I have tried to cycle the power on my model but no luck. Any ideas?

    Disconnect all connections from the Time Capsule except the AC power cord.
    With the Time Capsule powered on for a few minutes, hold in the reset button on the back of the device for 10-12 seconds and release
    Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
    Connect an Ethernet cable from one of the LAN <--> ports on the Actiontec modem/router to the WAN "O" port on the Time Capsule
    Open up AirPort Utility
    Click on Other WiFi Devices
    Click on Time Capsule
    The utility will display a window that looks similar to the illustration below, excep that there will be a picture of the Time Capsule instead of an AirPort Express
    Network Name......Enter a name that you want to call the wireless network
    Base Station Name....Enter a name that you want to call the Time Capsule
    Password......Enter a password that will be used for both the wireless and device name
    Verify the password
    Click Next
    When you see the the message of Setup Complete, click Done
    Now you can select the new network that you created and enter the password to connect
    Try to keep the Actionec modem/router and Time Capsule at least 6-8 feet (or 2 meters) apart from each other to help minimimize the chances of wireless interference between them.

  • No internet access after restart - msi RG300ex lite

    I just bought an msi RG300ex lite wireless router. Right off, the instruction manual is essentially worthless. I am trying to secure my connection which it seems there are 2 ways of doing this: through the wireless wizard or through the set-up tool page (wireless set-up). Problem is, once I do the set-up it works, but it the router is plugged out and turned back on my internet connection says no internet access. I then have to go through the internet wizard to get a connection again. What am I doing wrong, since the instruction manual does not mention anything about securing the wireless connection? I see there is wpa-psk and etc. The wizard chose wpa-psk2 I believe. Through a check on my windows 7 properties of the wireless connection the security type doesn't list any psk, I only see wpa personal, wpa2 enterprise. To tell you the truth I have no idea what the issue is. If you can provide me with a step by step would be greatly appreciated. Thank you.

    Here's is the info, it may not be with the router itself, but the router contrasting with the modem. I open the box with the new MSI wifi and plug it into the modem. Computer(s) see connection and it is open with internet access.  I connect and enter 192.168.0.1 into browser and screen appears showing "set up tool", "internet wizard" and "wireless wizard". I select wireless wizard, enter admin name and pass., USA, write a name in SSID which it checks for duplicates, select best channel, choices appear ( WEP, WPAPSK/WPA2PSK, and No Wireless Security), I choose WPAPSK/WPA2PSK (thus far tried them all), select next and more choices appear: AES, TKIP, I choose AES, Enter a network key (which I make up of course),  then select finish and save and close. Sweet, everything is working. Try 3 different computers, everything is perfect. The chosen wifi connection reads "internet access. To test it, I then unplug the "router" from the wall, because this is what I normally do whenever I leave home anyway, and plug it back in and the wifi connection is visible but the it says "no internet access" when I connect to it. I then have to enter 192.168.0.1 into the browser again, select internet wizard, two choices appear: "Automatic Internet configuration (Wizard will search Internet connection type automatically. DHCP or PPPoE modem can be detected.)" and "Manual Internet configuration", I choose automatic. It then says: "Physical connection of Internet(WAN) port is OK.
    If external modem exists,
    reboot the modem and check a Link/Sync/Online LED of modem.
    if this LED is on and doesn't blink,
    then you can process the next step by clicking 'Next' button."
    The is not blinking so I select next. It then says "Detecting Internet service type. Please wait a minute." Then "Internet is ready! DHCP", and everything is working again. However, why must I go through all of this each time? I never had to do any such thing with my last Belkin Router with the same modem, though unfortunately the router had a short or something after years of use and died. Help me please.

  • No internet access after 10.1 update

    After downloading the 10.1 update to my Z10 my phone could not get Internet access through the network, although wifi still worked. Telus tech support had no idea what was wrong, and we found that the apn field in network settings was blank and could not be typed in manually. He said I might need to send my phone in for repairs. He called me back the next day to say this problem has come up for some people since the update and for a workaround to restore the phone to factory settings. However, if you turn your phone off the problem will come back so you can't turn off or restart your phone. I restored my phone and got Internet back over the network. Hopefully blackberry will have an update to fix this problem soon, I don't know how long I can go without having to turn off or restart my phone. Anyone else familiar with or experiencing this problem?

    Hi man, I updated 3day ago my Z10 and I have the same problem I think. From time to time I get no internet connection by low or full mobile network. It has no reason, It´s just happened. Just like you wrote, reset or turning off/on the mobile helps not. But I don´t want reset my phone to factory default :-/ .
    I hope Blackberry tech support works allready on this problem!!!
    Come on Blackberry I need to work with my Z10 without problems!

Maybe you are looking for