No Internet access when I use a certain static IP yet other IP's are ok.
Hiya,
Strange IP issue !!!
I have a windows 2003 sevrer with a static IP.
My network has a DHCP server and that Particular IP is in the exclusion range.
When I open a browser on the server I get the error "internet explorer cannot display the webpage"
However if I change the static IP address to a defferent static Ip address everything works fine.
Here's the funny bit.
If I set a different PC to this troublesome static IP I also get the issue.
So the problem is with the Static IP address itself?
On the DHCP server there is no indication that this is a BAD IP ADDRESS etc..
Checkeded the firewall an this is not blocking either.
Any ideas why this particular IP fails to get me internet access ?
Ray..
IP with no internet access (IP Issue)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.1.3.150
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.1.2.254
DNS Servers . . . . . . . . . . . : 10.1.3.145
10.1.3.146
IP with internet access working (Normal IP)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.1.3.167
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.1.2.254
DNS Servers . . . . . . . . . . . : 10.1.3.145
10.1.3.146
DNS Server
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-14-5E-BD-CB-20
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.1.3.145
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.1.2.254
DNS Servers . . . . . . . . . . . : 10.1.3.145
Primary WINS Server . . . . . . . : 10.1.3.145
Similar Messages
-
No internet access when i use my notebook into a router
I am trying to use my notebook as a repeater.
I enabled the MS Virtual WiFi Miniport Adapter and configured it with a SSID and password.
The connection seems to be alright, but when connecting my phone to this connection, I get no internet access (the phone is connected and receives an IP with no problem, but when trying to connect to the internet, as if there is no connection).
I am running windows 7I am trying to use my notebook as a repeater.
I enabled the MS Virtual WiFi Miniport Adapter and configured it with a SSID and password.
The connection seems to be alright, but when connecting my phone to this connection, I get no internet access (the phone is connected and receives an IP with no problem, but when trying to connect to the internet, as if there is no connection).
I am running windows 7
wifi repeaters are specialized and its cheaper and easier to get one on ebay, they are low cost and are popular to deal with dead spots with wifi both with business and homes alike
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play! -
Cascaded routers: no internet access when second router not use NAT
Cascaded routers: no internet access when second router not use NAT
Here is my setup:
[pre]
WAN
|
| 74.96.170.x (WAN IP) |
| Router1(Verizon FiOS Router) |
| Model: MI424WR-GEN2 (Rev F) |
| Firmware: 20.21.0.2 |
| Def router: 74.96.170.1 |
| 192.168.1.1 (Local IP) |
|
| 192.168.1.22 (WAN IP) |
| Router2(Linksys) |
| Model: WRT54GL v1.1 |
| Firmware: v4.30.16 |
| Def Router: 192.168.1.1 |
| 192.168.2.1 (Local IP) |
|
| Computer 192.168.2.160 |
| Def Router: 192.168.2.1 |
"q.route" 120L, 4441C written
[m.wang@m-wang-ltm2:/Users/m.wang/m/Network]
$ more q.route
Cascaded routers: no internet access when second router not use NAT
Here is my setup:
[pre]
WAN
|
| 74.96.170.x (WAN IP) |
| Router1(Verizon FiOS Router) |
| Model: MI424WR-GEN2 (Rev F) |
| Firmware: 20.21.0.2 |
| Def router: 74.96.170.1 |
| 192.168.1.1 (Local IP) |
|
| 192.168.1.22 (WAN IP) |
| Router2(Linksys) |
| Model: WRT54GL v1.1 |
| Firmware: v4.30.16 |
| Def Router: 192.168.1.1 |
| 192.168.2.1 (Local IP) |
|
| Computer 192.168.2.160 |
| Def Router: 192.168.2.1 |
| NO iptables, basic setup |
[/pre]
On computer, I have:
[pre]
# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 192.168.2.1 0.0.0.0 UG 2 0 0 enp2s0
loopback localhost 255.0.0.0 UG 0 0 0 lo
192.168.2.0 * 255.255.255.0 U 0 0 0 enp2s0
[/pre]
On Router2, I have:
[pre]
Routing Table Entry List
Destination LAN IP | Subnet Mask | Gateway | Hop Count | Interface
192.168.2.0 255.255.255.0 0.0.0.0 1 LAN & Wireless
192.168.1.0 255.255.255.0 0.0.0.0 1 WAN (Internet)
0.0.0.0 0.0.0.0 192.168.1.1 1 WAN (Internet)
[/pre]
Router2's Operating Mode is Gateway. On Router1, I have:
[pre]
[Router1] Routing Table
Name Destination Gateway Netmask Metric Status
Network (Home/Office) 192.168.2.0 192.168.1.22 255.255.255.0 0 Applied
Network (Home/Office) 192.168.1.0 192.168.1.1 255.255.255.0 0 Applied
Routing Protocol: Internet Group Management Protocol (IGMP)
Default Gateway: 74.96.170.1
[/pre]
On computer, I can run tcptraceroute to yahoo.com OK:
[pre]
# tcptraceroute yahoo.com
Selected device enp2s0, address 192.168.2.160, port 46596 for outgoing packets
Tracing the path to yahoo.com (206.190.36.45) on TCP port 80 (http), 30 hops max
1 192.168.2.1 0.610 ms 0.729 ms 0.735 ms
2 192.168.1.1 1.843 ms 1.378 ms 1.363 ms
3 l100.washdc-vfttp-107.verizon-gni.net (96.241.146.1) 13.620 ms * *
... /* It reached the destination. */
[/pre]
I want to change Router2's Operating Mode from "Gateway" to "Router" because I
want to turn off NAT on Router2 so that I can access all computers attached to
Router2 by their individual IP instead of using port forwarding at Router2.
The problem is after the mode change from "Gateway" to "Router", and regardless
whether I disable RIP or enable RIP, and on what interfaces it is enabled, computer
192.168.2.160 does not have internet connection.
Observations:
[0] INTRAnet works as I can reach computer 192.168.2.160 from computer behind Router1
192.168.1.x and vice versa.
[1] ping and traceroute *work* on Router2 itself using the built-in dianostic tool.
[2] nslookup on computer 192.168.2.160 always works on new lookup. It uses
192.168.2.1 as the resolver.
[3] tcptraceroute stops after step 2:
[pre]
# tcptraceroute yahoo.com
Selected device enp2s0, address 192.168.2.160, port 45999 for outgoing packets
Tracing the path to yahoo.com (98.139.183.24) on TCP port 80 (http), 30 hops max
1 192.168.2.1 2.553 ms 0.534 ms 0.638 ms
2 192.168.1.1 1.342 ms 0.964 ms 0.867 ms
3 * * *
[/pre]
[4] tcpdump shows that computer 192.168.2.160 tries to reach out and nothing is returned:
[pre]
13:34:03.172828 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
13:34:06.175786 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
13:34:09.178804 IP 192.168.2.160.45999 > 98.139.183.24.http: Flags [S], seq 1122548929, win 0, length 0
[/pre]
This is not expected because NAT to internet should still be done by Router1, no? Computer
behind Router1 with IP 192.168.1.x has internet connection.
[5] It looks like I cannot change the Routing Table Entry on Router2. I do not think I need to change anything,
just an observation.
[6] If I use LAN to LAN connection, then both intranet and internet works. [The internet IP of Router2 can be
anything not in the same subnet of the Router1, and DHCP on the local side should be disabled to avoid conflict
with the the DHCP on Router1].I have a question. Unfortunately in order to ask my question, I have to have a lengthy description of my setup. Basically, I have a second Linksys router in "router" operating mode with NAT disabled connected to the Verizon router, and I have a computer which is in a different subnet (192.168.2.x) behind the Linksys router. This computer can communicate with computers behind Verizon router in subnet (192.168.1.x), but cannot reach internet. This is a simplified version of my question, full details are in the original post.
If I setup the Linksys router in "gateway" operating mode, which means with NAT enabled, then both intranet and internet works, but there is no easy way to setup port forwarding for 10 compueters in 192.168.2.x network to communicate with 10 computers in 192.168.1.x network.
If I setup the Linksys router in a LAN to LAN configuration with Verizon routers, but this way all computers are in the same subnet, I want them to be in different subnet for access control and things like that.
I hope this makes things a little clear.
Thanks. -
I just bought iWorks Serial Number Key over the internet. When I use the key, iWorks keep telling me the key is invalid!! Please help. (I bought this iWorks from someone in Singapore. I am using it in Malaysia.). Thanks
Downloaded the Trial version. It still says the serial number key is invalid. On the iWork page where I am suppose to enter the serial number key, the "Go Back" button is always BOLD, but the "Continue" button remains GREY all the time. The "Continue" button remains grey even after I have completed the key entry. I have to type the "Return" key on my keyboard to force enter the key. The message I get is still "Invalid key".
I have called Apple. The first person helped by asking me to delete certain items in some Folders and it still did not work. I was then connected to a senior person, but I heard over the recording that there were 15 persons waiting on the line. I had to end the call because the wait will take too long. -
Does a device need constant internet access when using Adobe products?
If a user wants to use photoshop on a device that is not 1)on an network 2) does not have internet access. Is this a problem when launching the program?
Hi CarolynHayden,
No. Your application are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license.
Please let us know if this was helpful.
Regards -
I am able to connect my ipad 2 to an iphone 4s personal hotspot via bluetooth or wifi. The problem is that I only have internet access with a bluetooth connection. Both are running ios 6.1.2 and I have tried to reset both to factory settings. Any suggestions would be reatly appreciated.
Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options? -
Why does it say no internet access when I connect my laptop to my personal hotspot IPhone 5S?
Every time I try to go on a webpage it says no internet access on the Internet bars
Hi, jon.baldauf.
These articles will help you troubleshoot the issue that you are experiencing when attempting to connect to the iTunes Store. Make sure after each troubleshooting steps to test the results.
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/ht1527
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
There is a possibility that security software installed could be the cause of the issue. You may have to process the steps in this article.
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Cheers,
Jason H. -
No internet access when "Send All Traffic" VPN Checked
Hi Ladies and Gents
Wonder if you can help me. These past few days I have been setting up a VPN on my DD-WRT enabled router. I have successfully accomplished such task, however when I'm connected to the VPN on my phone my public IP address does not change, after doing some reading I believe that is because "Send All Traffic" is unchecked in the VPN profile, but when I check "Send All Traffic" I get no internet access what so ever.
Any advice/input/solution to this would be greatly appreciated.
Cheers
CameronCammy1230 wrote:
when I'm connected to the VPN on my phone my public IP address does not
it's not supposed to. -
I want to disable Internet access to user using GPO
I am using Win Server 2008 R2, I want to disable the users from accessing Internet which are in that OU. Can anyone tell me how is it possible ?
Hi,
Disabling Internet access using software on the client is inherently difficult. The client isn't aware of what is an internal resource (like an Intranet page for example) as opposed to an Internet resource. You can use GPOs to disable specific programs
(like browsers) or to change how traffic is routed by the client but in order to effectively control who can and can't access the Internet, your best bet is a perimeter device like a proxy or firewall that sits between your clients and the Internet and is
integrated with AD so it can manage access to the Internet based on users, groups, IP addresses, etc.
The closest you can come without a proxy is to configure a proxy server address for those users using the Internet Explorer Maintenance component (found under User Configuration\Windows Settings). This proxy can either be a non existent address or
if you want more control over the error messages users get, it can be an internal web server with a page that provide a custom message. The same configuration will allow you to list specific URLs that are exempt in case you have specific web sites, internal
or external that must be available.
Note that this option will apply to all browsing, internal and Internet based, but will only impact IE. Internet access using other browsers or other software will not be impacted unless that software leverages the IE proxy configuration (which many
applications do).
Hope this helps,
Guy -
I recently purchased an i pad and have the internet at home, I am also a truck driver and once i leave home, I won't have the internet unless I stop close to where there is wifi, is there anything out there that I can purchase so I will have the internet at all times
I purchased a Verizon MIFI 2200 mobile hotspot with my forst generation iPad almost tow years ago so that I could have internet access with my WiFi only iPad and my iPod Touch. All in all it is pretty reliable but as varjak paw stated above...
"Either of course will be dependening on your being in a location where the carrier provides cell coverage".
Like my cell phone - there are locations where the MIFI doesn't play nice with the cellular networks and it may struggle to find a good signal. On the other hand, sometimes my connection zips along quite nicely. Just keep that in mind - if and when you decide to purchase a mobile hotspot. -
When I use IWeb to post my blog, many readers claim they are unable to post a comment. When they attempt, they receive an "error" message. I have check and re-checked that "allow comments" is checked in the appropriate window. Any help would be greatly appreciated.
You can publish your blog on any server but will lose the commenting capability. Since you'll have to find a new host soon anyway since MMe will go away on June 30, you might consider converting your blog to WordPress as that's the only other blog type that an MMe blog can be converted to and keep it's comments, etc. Rage Software has create an application that will convert an iWeb blog to WordPress: Convert Your iWeb Blog to a WordPress Blog | iWeb to WordPress. That way you can keep your blog's continuity.
This may be of some additional help to you: Life After MobileMe. -
IPad Internet access when WiFi and Cellular features are disabled
Local security policies require me to disable all wireless communications on devices operating within specific “Controlled Access” areas. Is there a specific lightning (cable) adapter I could use to connect an iPad device to a hardwired Ethernet cable (CAT-5 or 6) to facilitate wired internet communications in this situation? Alternately, can I use a standard Lightning-to-USB cable connected to a MacIntosh computer and somehow configure the MacIntosh to act as a router-like device for internet communications between the iPad and other intranet or internet endpoints that the MacIntosh is also able to interact with? Basically, I need to establish internet connectivity to/from the iPad without the use of wireless communications options, and I'm interested in the options I could pursue.
Thanks for the YouTube links bobseufert.
I'm going to try this approach out myself (just to verify that it works), but I'm really hoping that another - less encumbered, approach can be found for my end-goal. The larger-scale view of my need includes connecting multiple iPads (one per workstation area) to a local intranet. Since I can't use a WiFi or any other wireless communications solution for this installation, I might need a collection of adapter cables and powered USB hubs if I choose to implement the options detailed in these two videos on a large scale. Sure, that's all possible, but what I'm really hoping to find somewhere is an RJ-45 configured Ethernet-to-Lightning Adapter that will work with iOS devices.
From one perspective I can see why this type of adapter has not been built yet. However when you think about the wired adapter options that are available to connect the iPad/iPhone to a remote display (or overhead projector) - there is at least three different versions available through Apple, even through Apple sells wireless video display capabilities (I own two Apple TV devices myself), you wouldn't think that a wired network option for these mobile devices would be something out of the question...
BTW, I noted that Redpark (www.redpark.com) has some serial (RS-232) adapters for the older 30-pin iPads/iPhones and for the newer Lightning equipped iPads/iPhones that Apple has signed-off on. Redpark also has an RJ-45 to Lighting Adapter, but this particular implementation is built (i.e., wired) for the CISCO Console port, which is not compatible with your typical CAT-5 / CAT-6 wiring configuration.
If anyone else finds a Lightning Adapter providing both Ethernet-based Data (via an RJ-45 connector) and Power to keep the iPad devices charged (24/7) I would really like to hear about it... Thanks for your continued support! -
Why do I not have internet access when my phone says it's on LTE?
I am currently having internet connectivity issues. My phone will say it's on LTE, but when I try to use an app that requires internet connectivity, it says that I need to check my internet connection. I can't refresh facebook, check e-mails, or send iMessages. When I join a Wifi network, everything works as it should. I've tried doing a soft reset on my phone multiple times by holding the home and sleep button down until the phone reboots. I've also restored network settings, but nothing seems to be helping. Just wondering if anyone had any tips before I had to take it into the Verizon store.
meganweers,
I am sorry you are having these issues with accessing the internet on your device. Thank you for all the troubleshooting you have done thus far. Have you tried to remove and reinsert the SIM? http://vz.to/1irq2bL Are you able to send text messages and use voice just fine? Are there others reporting the same issues with data connection?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
No Internet access when easy vpn tunnel is down.
Hi.
I have an error. i have a 819 router. with a Easy vpn tunnel.
And i am using the Identical Addressing feature, where i nat vlan1 over loopback0
I also have a vlan2 where i dont use identical addressing.
I have the Easy vpn tunnel configured on loopback0 and vlan2
from Vlan1 i nat to looopback0 with
ip nat inside source static Network 192.168.250.0 192.168.5.0 /24
and i nat outside with
ip nat inside source list INET interface GigabitEhternet0 Overload
ip access-list extended INET
permit ip 192.168.5.0 0.0.0.255 any
When tunnel is up, there is internet from vlan1, vlan2 and loopback0
But when the tunnel is Down, i can only get internet from Vlan2 and loopback0
The route for the tunnel is 0.0.0.0, i need all data to go to the vpn when its up. and to the internet when its Down.
Any ideas?
Thanks.That is correct.
Config.
controller Cellular 0
no cdp run
track 1 ip sla 1 reachability
default-state up
ip tcp synwait-time 10
ip ftp source-interface Vlan1
ip ssh rsa keypair-name Router.yourdomain.com
crypto ipsec client ezvpn VPN-Cel
connect auto
group VPN key -key-
mode network-extension
peer 12.12.12.12
virtual-interface 1
username RouterCel password Password
xauth userid mode local
crypto ipsec client ezvpn VPN-Eth
connect auto
group PANTst key -key-
backup VPN-Cel track 1
mode network-extension
peer 12.12.12.12
virtual-interface 1
username Router password Password
xauth userid mode local
interface Loopback0
ip address 192.168.6.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip virtual-reassembly in
crypto ipsec client ezvpn VPN-Cel inside
crypto ipsec client ezvpn VPN-Eth inside
interface Cellular0
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip inspect CCP_LOW out
ip virtual-reassembly in
ip verify unicast reverse-path
encapsulation slip
load-interval 30
dialer in-band
dialer idle-timeout 0
dialer string hspa-R7
dialer-group 1
no peer default ip address
async mode interactive
crypto ipsec client ezvpn VPN-Cel
interface FastEthernet0
no ip address
interface FastEthernet1
switchport access vlan 2
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface GigabitEthernet0
ip dhcp client route track 1
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip inspect CCP_LOW out
ip virtual-reassembly in
duplex auto
speed auto
crypto ipsec client ezvpn VPN-Eth
interface Serial0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
shutdown
clock rate 2000000
interface Virtual-Template1 type tunnel
no ip address
ip nat outside
ip virtual-reassembly in
tunnel mode ipsec ipv4
interface Vlan1
ip address 192.168.250.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
no autostate
interface Vlan2
ip address 192.168.16.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
no autostate
crypto ipsec client ezvpn VPN-Cel inside
crypto ipsec client ezvpn VPN-Eth inside
interface Dialer2
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip local policy route-map myRoutes
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list INTERNET interface GigabitEthernet0 overload
ip nat inside source static network 192.168.250.0 192.168.6.0 /24
ip route 0.0.0.0 0.0.0.0 Cellular0 254
ip route 8.8.4.4 255.255.255.255 Cellular0
ip access-list extended INTERNET
permit ip 192.168.6.0 0.0.0.255 any
permit ip 192.168.16.0 0.0.0.255 any
ip sla auto discovery
ip sla 1
icmp-echo 8.8.8.8 source-interface GigabitEthernet0
ip sla schedule 1 life forever start-time now
dialer-list 1 protocol ip list 1
dialer-list 2 protocol ip permit
route-map myRoutes permit 10
match ip address 101
set ip next-hop dynamic dhcp
access-list 1 permit any
access-list 23 permit 12.12.12.12
access-list 23 permit 192.168.0.0 0.0.255.255
access-list 101 permit icmp any host 8.8.8.8 echo
control-plane -
Flash 10.1 Freeze Internet Explorer when I use strokemediaplayback in intranet
When I test flash in my company intranet(cannot link internet),I found the flash will freeze the IE.
I found this when:
I open a page include flash content which use strokemediaplayback to play a movie.
The content page locate on my IIS server(not local computer).
I close IE in the first 40seconds, then IE didnot response for many seconds(about 40seconds).
I watch the Tcp connect. I found flash connect to a25-252-224-80.deploy.akamaitechnologies.com and a25-252-224-90.deploy.akamaitechnologies.com, and wait for tcp syc timeout when I do above testing.
And, I found when I test strokemediaplayback on my local computer above not happening.
Even I close the flash autoupdate in mms.cfg. Flash still connect to a25-252-224-80.deploy.akamaitechnologies.com and a25-252-224-90.deploy.akamaitechnologies.com,and wait for connect fail.
Who can answer me ,how can I do for stop this?
I test on Internet Explorer 8,and Flash 10.1.102.64 and Flash 10.1.53.64.Update: the problem mysteriously disappeared - no clue to why.
Maybe you are looking for
-
Short dump when executing report.
Dear all, Im running a web template report which is calling a multiprovider and within the multiprovider are 9 cubes. All cubes have aggregates and are optimize for performance. Lately, for the past 2 days, users have been complaining that they keep
-
ITunes will not install on Windows 8 laptop (despite several attempts)
Please help ! I recently purchased a Sony laptop, with Windows 8 installed. Trying unsuccessfully to install iTunes 11 on it. Application downloads ok, but when I try to run & install 'iTunes64setup' it tells me that my pc is not compatible ??? I vis
-
Photoshop cs4 file/scripts/image processing settings
I have recently started freelancing for a local newspaper, as you can imagine i could have up to 100 images to process at the end of the day. I started using file/scripts/image processing in photoshop cs4 to automaticly size my images. this is indeed
-
i just got a used 15" apple studio display when i dim light a bit it start making a noise that becoms higer when i dim it lower and lower it stops only when the screen is set to higest or brightest level what should i do? thanks ariel
-
UnMapping Fields which are sent from XI
Hi , Scenario : I am doing an auto import of data . I receive an XSD from and an XML which has 40 fields and in the MDM system i have only 30 fields to map . Is this possible.If i do not map my source to any destination will it throw a structural exc