No Internet after installing Windows 7

I recently installed Windows 7 onto my HP G60 and it won't allow me to access the internet or find a connect. I need the correct driver/link to install onto my laptop. Where can I get this ?

Hi: You'll have to know what model wireless card your notebook has and you will have to enter the full model number/product number of your notebook at the link below to be directed to the support and driver page. http://h22207.www2.hp.com/us-en

Similar Messages

  • After instaling windows 7 with bootcamp windows fails to connect to internet

    after installing windows 7 using bootcamp on mac osx lion windows wont connect to internet it appears to have no drivers installed for ethernet device

    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
    "Go into System Preferences - Network - Advanced - Proxies  Uncheck "Auto Proxy Discovery", click OK, Apply"
    After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
    odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started.  Windows support software is now downloading...  if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB (format as FAT and MBR).
    https://discussions.apple.com/thread/3223773?start=15
    Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
    208.67.222.222
    208.67.220.220
    Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

  • A lot of problems after installing Windows XP using Boot Camp on a Mac Book

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
    ~Twilight

    ---I'm moving this topic to the Boot Camp forums.
    -Twilight

  • How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • MANY issues after installing Windows XP Home Edition with Boot Camp

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
    ~Twilight

    Twilight:
    Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
    Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
    Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
    Axel F.

  • I can no longer boot up in osx after installing windows 7 with bootcamp

    After installing windows 7 with boot camp I am no longer able to access my osx side, I do not receive an option when holding alt when turning on my MacBook

    What options do you get? If you don't get any options then you may not be pressing and holding the option key long enough or you are pressing it too early or too late.

  • No Bluetooth after install Windows 8.1 - Model: pavilion dv6 6080se

    Hi
    please help me
    there is no blutooth driver & software after install windows 8.1 pro 64bit
    i used all of past ver. drivers, but it says, your bluetooth device not connected
    i installed hp support asistant, i used windows update and check optional updates, a......n......d, no action
    please show me a way to use my bluetooth

    what? downgrade?!!!
    is this HP support?!!!
    are you kidding me?
    downgrade!!!
    best of luck!!!
    my friend's old dell laptop has 8.1 O.S. and it's working with good performance. without problems like this.
    and now, you want to downgrade While I've bought windows 8.1

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • How can I partition internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    I recently purchased MacBook Pro 13" (Late 2011) model with OS X v10.7.2 Lion installed. I've upgraded to OS X v10.7.3 Lion and updated all other software.
    I require Windows 7 for some Windows based softwares that do not support Mac OS X. Therefore, used Boot Camp 4.0 to install Windows 7 and then tried partitioning single internal HDD  to have 3 partitions (4 total including BOOTCAMP partition). Disk Utility created a 648.5MB partition and then I was able to create 3 other partitions of custom sizes. After applying these changes, I got an error message that said selected volume size is too small. I resized this 648.5MB partion to a custom size and had total 4 partitions, including BOOTCAMP.
    After reapplying these changes, BOOTCAMP partition was removed and I was left with only 3 partitions and empty space.
    I've tried several different ways to partition the disk, all in vein. Is there a way I can partition my single internal HDD after installing Windows 7 Professional via Boot Camp 4.0?

    You can't do what you want with GUI utilities, which will only allow a total of 4 partitions due to the limitation of MBR needed to support Windows. Those four partitions: EFI System (hidden), Mac OS, Recovery HD (hidden), Windows. So with Lion, you only get two visible partitions if you're going to use Windows with BootCamp. You can't make anymore with the included graphical tools.
    If you need more partitions you'll need to use something like GPT fdisk (gdisk) to create the partitions in the GPT first. Then add the Windows partition only to the MBR and flag it as bootable. gdisk can be googled and downloaded for Mac OS X off sourceforge. It is not a GUI tool.
    You should read this:
    http://www.rodsbooks.com/gdisk/
    And this:
    http://www.rodsbooks.com/gdisk/hybrid.html

  • No bootable drive after installing windows successfully

    I am trying to install Windows XP/Vista 32 Bit On Intel Mac Notebook through BootCamp.But after installing windows successfully,when it reboot?resatrt,It gives me error message that NO bootable Drive ,Press any to key to continue.......
    I have Downloaded Windows XP/Vista 32 Bit ISO format and burned it on my DVD through Disk utility.I can install windows successfully but when it restarted then it gives that message.However I am able to locate windows hard drive after holding the Option Key and when I choose the windows HDD (BootCamp),It gives me same error.
    I started the installation in osx using boot camp, and the windows was completely installed, even the boot camp driver for windows was installed and there are options to restart into either windows or mac osx.
    But when I restart the machine and choose to go into windows, it just can not boot, saying no bootable device. If I insert the installation disc into the drive, then I restart and go to windows, it can boot successfully.
    Please Help.
    Much appriciated.

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Is there a new driver needed to run Photoshop CC after installing Windows 8.1?

    Has anyone had trouble with downloading pictures to Bridge after installing Windows 8.1?

    You may have to reset preferences.  Hold down Ctrl key and start Bridge.  You should get a reset window.

  • Dvd/cd player won't work after installing windows 8.1

    I recently installed windows 8.1 on my Pavilion All in One Desktop Computer and now the computer won't recognise the DVD/CD player. I have downloaded all current drivers, but still not working. Any ideas?

    Hello Gindel95,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the DVD/CD player will not work after installing Windows 8.1, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer?
    What version of Windows did you have installed on your computer before upgrading to 8.1?
    Has your computer completed all of its important Windows Updates?
    In the meantime, I recommend following this document on Download or Update Software and Drivers for HP Computers, which should help configure your DVD / CD drive.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • \\?\volume{fabc216-f912-4ff7-ae4b-6914f7d120c53}\ after installing windows 8.1

    \\?\volume{fabc216-f912-4ff7-ae4b-6914f7d120c53}\ after installing windows 8.1 this drive came up and it needs 22% defragmenting, also another drive showed up windows RE tools... please help!!!!!

    Hi,
    You're asking this question in the wrong forum, this forum is meant for discussions on the forums redesign, not individual product support.
    Your best bet to get some help with this issue will be to post in the Windows forums here:
    http://answers.microsoft.com/en-us/windows
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • HP6520 Scanner and Copier Broke after installing windows 8.1

    After installing windows 8.1, my copier and scanner stopped working.  I have an HPPhotosmart 6520.  There is no "Microsoft Fix it" for Windows 8.1. Could you help me with this problem? Thank you.

    Hi,
    Give it a try. All the best.
    Regards,
    Asim

  • Monitor calibratio​n problems after installing windows 8.1

    I have a hp envy m6-1105tx and right after installing windows 8.1 my monitor changed completely.
    When i have a photo open in photoshop tones, colors luminosity, gamma etc are all wrong. Before i never had problems, when i looked at a photo in photoshop and i will see the photo on a different screen it would be basiclally identical but now the photo in photoshop is much different than the actual photo, and this doesn't apply only to photoshop but to everything. I already try to do the calibration through the control panel but it didn't improve the situation, is there a way to get the screen back to the way it was before?
    Thanks

    Wehodancer, welcome to the forum.
    I checked for an updated driver for the video, but there is none for Win 8.1.  Therefore, I suggest installing the original driver for the video to see if it helps.  It may be that it was corrupted during the update process.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for