No internet after update

Had 3g all the time. Now I have no internet service. Anyone else? Of couse I tried everything except a hard reset. Out of hours now so I guess i will just wait till 6am.

Just a quick question. Do you have WiFi running ( as seen in notification bar)? 3G will not run when Wifi is running. Your phone will defer to Wifi if the signal is there over 3g. Unless you manually turn off Wifi.

Similar Messages

Cannot longer browse the internet after updated 10.5 to 10.5.8

cannot longer browse the internet after updated 10.5 to 10.5.8

Did you repair permissions?
Did you backup your data prior to installing?
Are you using any non-Apple routers to connect to the modem?
Is this with a notebook or a desktop Mac?
Are there any other Macs with 10.5.8 or newer that can connect?
Does connecting directly to the modem work via ethernet, or are you on dialup?

How to restore safari icon and internet after updating 3gs to ios6.1

How do I restore internet function and Safari icon after updating iPhone 3gs to ios 6.1?

The Safari icon cannot be deleted. Go to Settings > General > Restrictions, verify you didn't turn it off.
Otherwise try Settings > General > Reset > Reset Home Screen Layout.

Can't access internet after updating to firmware 7.3.1

After updating to firmware version 7.3.1, I lost the ability to access the internet. The AEBS thinks it has an internet connection (the light is green), but it does not. I have tried restarting the AEBS and my cable modem router.
I had the same problem with firmware version 7.2.1, and had to revert to 7.1.1.
I'd like to find a solution so that I can make use of Airdisk and Time Capsule.

Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

Sony Bridge Can't Connect To Internet After Updating To Mountain Lion

I've tried multiple times now, to get Sony Bridge to check for updates, but every time I try, I get the following error:
Cannot Check For Updates (no internet connection)
I'm on a 2008 iMac, connecting with a Live With Walkman.
My Mac is online and the problem only occurred after updating the OS to Mountain Lion (10.8).
Thus far I've tried going into the user library, and have deleted the two Sony folders present in the Application Support folder, but to no success, I still get the same error.
I'm firing this up regularly to see when ICS is going to drop in Belgium, so I'd be keen to hear of any possibile solutions. Thanks.

Hello OneManLaptop
ML came out 3 days ago...There is as of right now no tested version of Bridge for MAc available for it.
You will need to wait for the Update of the application but right now we can't provide a ETA for it.
Sorry for the inconvenience that this may cause you.
Francis.

Can't connect to internet after updating new Firmware wrt54g Help please!

So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

I am having the exact same problem.. I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help.. It says if you can't access the web based page then to use the TFTP utility to re-flash the router’s firmware but it seems it cannot make a connection to the router.. I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router.. I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well.. So what gives? I followed the directions but the only thing I seemed to accomplish was to brick my router.. Does anyone have a clue on how to go about fixing this problem? Any help is appreciated..

Problems to acces Internet after update to OS X Mountain Lion

After updating to OS X Mountain Lion I can not acces any web that works with and user and a password. Normal acces to any open site. App store is also not working neither software actualization. Keeps trying to connect until time out message appears.
Thanks in advance for your help

If your friend purchased Mountain Lion, have them sign into the App Store using their Apple ID and download it again.
You can make a bootable USB stick to install using this free program which will do all the work for you.
Bootable USB Flash Drive – Diskmaker X

No longer can connect to the internet after updating to 10.4.10 for Intel

I (fortunately) use a cloning program (SuperDuper) to clone my MacBook Pro hard drive now and then on to an external Firewire hard drive... I say "fortunately" because after reading some of the problems folks were having with this most recent OS X update (10.4.10) I chose to update the cloned hard drive first before installing the update on the main drive... On or about 6/20 an update came out (that I can't find anymore so maybe they pulled it??) that was called "MacOSXUpd10.4.10IntelPatch.pkg". First I installed that update on my cloned drive... It booted and worked fine except that when I would try to communicate with the internet wirelessly, I could not... I didn't try a "wired" connection because I am not interested in connecting that way. The system would claim to connect to my wireless router (NetGear WGU624) but pages would time out before loading... Next I tried installing the newer (7/02) Combo package called "MacOSXUpdCombo10.4.10Intel.pkg" but that improved nothing. Still no useable wireless internet connection... So in no way will I be putting this 10.4.10 update (Patch or Combo) on my main drive until something gets fixed... In fact, I went ahead and overwrote what I had on the firewire drive by recloning my main drive (running under 10.4.9) to that firewire drive again... Once I got 10.4.9 reinstalled on that firewire drive, it again connected to the internet just fine... So my experience is that there is something not happy about either the Patch or the Combo updates for 10.4.10, at least as it relates to my Intel system... I also have a G4 PPC and on that machine, the PPC version of the 10.4.10 update worked just fine (though that is a wired connection, if that matters)... Anything I am missing or can someone offer other input other than not to upgrade at this time??? Thanks... Bob...
FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.9)

Hello Robert:
I infer from your post that you selected the updates to install, rather than using software update (IMHO a bad idea). At the moment, as I understand your post, your backup is not working properly and your internal HD has not been changed.
I suggest this:
Clone your HD to your external firewire drive (new copy, not an update of changed data.
Then you have a clone in case someting goes wrong.
Update your HD using software update. If everything is running well after that, you are OK. If not, you can restore your HD from the clone.
The reason I favor using software update is that the system selects the proper software. When Apple releases updates, there are several versions available.
If you know all this, forgive the explanation - I do not know your level of computer expertise.
As an aside, there is nothing (that I am aware of) organically wrong with the OS X 10.4.10 update. Apple did release a 10.4.10 v1. update for the Intel boxes (I do not run Intel-based Macs, so I have not investigated it):
http://www.apple.com/support/downloads/macosx10410updatev11intel.html
Barry

Can't connect to Internet after update

I've had this issue before but I was atleast able to get on iTunes & firefox. After this update my comp can't connect to the Internet period. I called my cable company & everything was working fine on their end. My modem communicates that it's linked my comp by a flashing light. In network prefrences my Ethernet says connected. I do not use a wireless router. I went to the Apple store & managed to get a connection smoothly. After I did the update was when my comp was unable to connect to the Internet, firefox, safari, iTunes NOTHING. I don't have any anti virus programs on my comp.
Help anyone?

Anyone???? This all happened after the 10.6.8 update...at the Apple store my Internet worked fine. Once I get this resolved I'm never updating again!

Problems with Internet, after update to build 9926

updated to version 9926 via the Update Center. everything worked properly. once it updates via windows update kb2267602 kb3034229 and update for the graphics card. after installation, LAN connection and WIFI stopped working (unidentified network without
Internet access) diagnostics showed one or more protocols are not set / incorrect value ip. after the introduction of hand-ip network has become identified, but the Internet has not appeared and diagnostics began to show problems with DNS. Internet on other
devices are working properly. Sorry for my English.

Hi Jetbal,
What is your current situation?
Have you tried to manually install the LAN and WIFI drivers? Download the drivers from the manufacturer side, then take a try to install them with compatibility mode. Right -click on the install file, then select compatibility tab, under taht tab, choose
Windows 8.1 or Windows 7 compatibility mode and then install to check if issue could be solved.
Best regards
Michael Shao
TechNet Community Support

Phone won't connect to internet after update to 4.3.4.

Prior to the latest update, my phone worked fine, requiring a restart maybe once a week when it would not connect to the internet. Now since the update, requires a restart after every 2 or 3 pages of internet. Ideas?

Turning off unneeded features will help battery usage, such as Push Notification, turn down screen brightness a bit, and numerous others. Search on this forum for battery drain, usage and such.
A fix for battery drain issues is to Restore the Firmware and set up the iPhone as "New" when iTunes asks at the end of the Restore Process.

No wireless Internet after updating to iOS 4.3.3 and other bugs

Hello,
Yesterday I updated my iPhone 4 to the latest version (4.3.3), and have noticed that the network is only showing EDGE (E icon) eventhough 3G is enabled. Before this 3G internet was working fine. I checked the APN settings, and they haven't changed. Are any of you guys having the same problem?
Besides that, today, for no apparent reason, while my phone was ringing, the display turned off, and the iPhone wasn't turning on (black screen), and I had to restart the iPhone to get it working again.
Are this issues related to the update?
Maybe I shouldn't update, but ****, if Apple puts an update over the internet it's because they've tested it and because it's supposed to be better than the Firmware you're actually running, isn't it?
Mauricio

-1 to Sonar05, never assume JB is the cause (that's not JustinBieber, it's the acronym jailbreak)
Some iPhones just randomly die... you can see if at&t will examine the phone if not, take it to your local Apple Authorized repair center (call Apple to locate a repair center)

Can't connect or incomplete connect to internet after updating to 10.5.5!!!

Hi
I am having a problem connecting to the internet since I updated (via Software Update) to 10.5.5. There is not a problem with the house internet connection, because 2 other PC's here are connecting fine. I get full wireless strength, my VPN tunnel works, and my skype works. I just can't get on the internet.
I run diagnostics, and it either tells me it's not working, or it tells me it IS working, but I still can't get a web page to load. I have power cycled all the modem/router/MBP a hundred times. I re-setup my connection, and I also tried setting it up with the ethernet cable directly. Nothing works.
I just ran diagnostics AGAIN, and it tells me my internet connection is working correctly...but when I try to open a web page, I get the error that I am not connected to the internet.
It worked flawlessly before the update. So what do I do? Is this an Apple bug that they are going to fix or can fix?

I am writing just a short message in case Apple mistakenly believed that this problem was solved.
It is quite clear that many other people than the ones in this thread are experiencing the problem. From what they describe, possible candidates are:
http://discussions.apple.com/thread.jspa?threadID=1749468&tstart=15
http://discussions.apple.com/thread.jspa?threadID=1756323&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1752506&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1754653&tstart=0

Cannot access internet after updating to 4.2.1

I updated my phone today to 4.2.1 and now I can't access the internet at all.

Error messages?
Is the issue with cellular data? Wi-Fi? both?
Have you done the basics of reset, reboot, restore?

IPad Air can not connect to internet after updating to iOS8.

Safari CAN NOT OPEN ANY PAGES because the iPad is not connected to internet. I updated to iOS8 last night and have been trying to reset my ipad as well. However, the problem is still there. It even says my Apple ID incorrect. GUYS! DO NOT UPDATE YOUR iPAD TO iOS8 UNTIL FURTHER NOTICE!!!!!!!! Luckily, I did not do anything with my phone. PHEW

Other threads I've read have had people note that the following solutions have worked for them:
If you have a 5 GHz wi-fi router, turn off 5 GHz support and let it fall back to 2.4 GHz.
Change wi-fi router to auto-select channels, or manually select a different channel than what it's on now.
Disable iCloud Drive.
I'm not saying that that any of these will work, but it's something to try (one at a time).

My iPad (original) no longer connects to the internet after update to ios 5. Are there any solutions to this issue?

Has anyone found a successful method to connect? This is not a router issue as other devices, including another iPad not updated to ios 5 connects just fine. I am getting frustrated

I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk

No internet after update

Similar Messages

Maybe you are looking for