No internet connection after upgrade from windows 8 to windows 8.1

I have upgraded my operating system from windows 8 to windows 8.1, I also updated windows 8.1 after the system upgrated. I found there is no access to internet, although I have full wifi signal. I tried to conncet to the router via ethnet cable, but it still has no internet connection. However, I can see other computers at homenet via wifi. I have seen some questions in the Forum regarding wifi failure after upgrating to windows 8.1, and I tried to uninstall all my drivers (LAN and wireless) of network adapter, and re-install the latest drivers from HP website at http://support.hp.com/gb-en/drivers/selfservice/HP-Pavilion-Sleekbook-15-b000/5296234/model/5311051#Z7_3054ICK0KGTE30AQO5O3KA30R1(I tried the Ralink ones as I remembered the old drivers are Ralink), but it does not work. Please could you help?

Hi @Koala76 , Thank you for visiting the HP Support Forums and Welcome! I have read your post on your HP Pavilion Sleekbook 15-b052ea and Windows 8.1 causing issues for you when trying to connect to the wireless. Try opening Device Manager, clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager. In Device Manager, locate the network adapter, and then double-click the device name. Click the Driver tab, and then uninstall everything in the list except the Realtek and the Ralink. Remove any USB devices and Ethernet cables that are connected. Restart the computer. After you restart the computer, please use the HP Support Assistant. The HP Support Assistant has a wireless connectivity troubleshooting tool inside. Here is a screen shot of the Internet and Security tool that will help you diagnose Internet Connectivity. I hope this helps! Thanks.

Similar Messages

Loss of internet connectivity after upgrading to windows 8.1

Hi, After upgrading to windows 8.1 from windows 8 i am experiencing major problems , loss of internet connectivity for no reason both I.E. and G/CHROME are now taking an age to open there are no virus issues as far as i can see.
I have uninstalled and re-installed windows 8.1 about four times over the past 9 months or so and the same thing happens after all the updates are in it runs like a dream for say 6weeks or so then i get the same faults as described above then i uninstall/ re-install ok for 6 weeks .
I would apprieate any help or advice thanks

Hi @BMATH
Thank you your query.
I understand that after updating to Windows 8.1 about every 6 weeks you loose wireless connectivity for no reason and the web pages are very slow to open. If you uninstall and reinstall Windows 8.1 it works fine again for about the same amount of time. You have done this about 4 times with the same result each time.
Do you know if there is any changes at that time , perhaps an update?
You stated you do not believe you have any viruses. Just to be sure here are two links that will help confirm that.
Microsoft Malicious Software Removal Tool
Microsoft Safety Scanner
After updating to Windows 8.1 have you checked for Windows updates?
Have you ran HP Support Assistant ?
Here is a link to Troubleshooting Wireless Network and Internet (Windows 8) that may also help.
If the issue should remain please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

No Internet connection after upgrade to Win 10 with Dell XPS Fixed

After upgrading from windows 8.1 to 10 on my dell I had no internet connectivity.The answer is that the update reset the driver to default mode. Specifically bandwidth.Go to control panel / device manager / WiFi cardgo to device / properties - Advancedselect bandwidth and change from 20 only to 20/40 auto.

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort/Wi-Fi menu bar item to turn AirPort/Wi-Fi off, then on again.
2) Try to select your Wi-Fi network from the AirPort/Wi-Fi menu.
3) In the Network panel of System Preferences delete the AirPort/Wi-Fi item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort/Wi-Fi connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Reinstalling Elements 11 after upgrading from Windows XP to Windows 7?

Any idea how I can reinstall Elements 11 (Premier and Photoshop) after upgrading from Windows XP to Windows 7?

Download from
Download Photoshop Elements products | 13, 12, 11, 10
Download Premiere Elements products | 13, 12, 11, 10
Install then enter your serial number.

MBA loses internet connection after waking from sleep

I have a new Macbook Air running Mavericks and new 802.11ac Airport Extreme router.
My problem is that the MBA drops the internet connection after waking from sleep. I tried the solution offered by the OP, but it didn't work.
In my case, here's what I have to do to get a connection again. I open the Network preference pane, and then choose "Assist me..." and then "Diagnostics". Invariably it will show a green light beside Wi-Fi, Wi-Fi Settings and Network Settings. I have 5 bars showing in the WiFi menu bar icon. But ISP, Internet and Server will be yellow.
When I go through the steps prompted by the wizard, the ISP/Internet/Server lights turn green on the third screen where I select the wireless network I want to join.
It seems as if it's connecting to the WiFi network when it wakes from sleep, but losing the internet connection?
Note: I have a new iMac as well running Mavericks and don't have this problem with it.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Problems connecting to the internet after Upgrade from windows 8.1 pro

Cant connect to the internet after upgrading to windows 8.1 pro, what can i do to rectify this problem?
Thanks

Hi,
You can also try to install the older version in compatible mode:
Windows 8.1 Wifi showing "limited" or "No Internet Access"
Solution: revert your network adapter driver back to an older version
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
In addition, disable power management on your network driver:
Open Network and Sharing Center.
Click the Change adapter settings link in the upper left of the navigation pane.
Right click the network connection you want to enable/disable power management support on and click Properties .
Click Configure .
On the Power Management tab, clear the Allow the computer to turn off this device to save power check box.
If the issue still persists, please upload the event log for our research:
Kate Li
TechNet Community Support

Problems with your internet connection after upgrading to iOS 7.1.2

After upgrading to iOS 7.1.2 on my iPad Retina display does not connect to the internet more. Recognizes the Wi-Fi network but can not connect to the internet. The same thing happened to my wife's iPhone 5s, while my had no problems ...

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

AMD redeon HD 7400 graphic not working after upgrading from windows 7 to windows 8 Pro

Hello,
I have hp Pavilion G6 1117tx model. i have upgrade from windows 7 to windows 8 Pro. after upgrading i have observed that on righ click option i have not fine CCC and Configure switachable graphic option is missing. so please help me how i can solve proble relationg to AMD redeon hd 7400 grphic card and intel hd 3000 series grphic switchable option.
Please help........
Mounal Patel
This question was solved.
View Solution.

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

USB device keeps disconnecting/connecting after upgrading to Windows 8.1

I have a device(Pedal for Sim Racing) connected via USB, everything is working fine in Windows 7 and 8 but after upgrading my machine to Windows 8.1 the device keeps disconnecting and connecting for like every 2 seconds. But after I open the Property Sheet
in Game Controllers panel the disconnection issue was gone, if I reconnect the device the issue persist. Other people who have similar device also encounters the same issue after upgrading to windows 8.1. The issue persist with or without the device driver
installed.
Any idea, what might cause this?
Best regards
mark

I'v got this exact same problem with my Win 7 desktop. I've also got pedals and wheel but don't see it as different than all the other USB devices. I'm using a bunch of USB, but no hubs, including 3 external storage hard drives. But the momentary
disconnect appears in all devices as best as i can see..even my long time trouble free head phones..keyboard..and all. Sometimes the sound goes away and if I unplug and replug them the sound comes back, and other times I have to exit and re enter the
game. I also get video crashes ..maybe not related.IDK..and have to restart all, because I've got three black screens in Eyefinity. For years my system was trouble free and its just slowly started getting worse. I've thought it had to do with system "sleep"
etc but long ago went to never sleep max performance etc..Makes no difference. Keep thinking its my hardware or my house wiring etc..But can't seem to solve it. I replaced my Mobo/chip/ram maybe 6 months ago and that appears to have not helped. It seems
to be getting worse. I hate to start replacing parts piece by piece..cost a lot of money and sometimes doesn't help.
When I'm playing a game I can often hear "faint" sound of USB connect disconnect happening with regularity..that little bing/boink sound etc..So it must just be constantly happening...Seems weird. Didn't have anything like this happening years
ago with pretty much the same hardware and same Win7 with the continuing updates etc.
What can be causing this common problem?

Windows 8.1 RDP crashes very frequently after upgrade from Windows 8

Hello,
I installed Windows 8.1 EE x64 as upgrade from Windows 8 EE x64 on my personal computer. After that RDP crashes very frequently.
Here is my errors from event viewer (I have Czech language so sorry for it)
Application Error (ID: 1000)
==================
General
Název chybující aplikace: mstsc.exe, verze: 6.3.9600.16384, časové razítko: 0x5215e2b5
Název chybujícího modulu: ntdll.dll, verze: 6.3.9600.16384, časové razítko: 0x5215f938
Kód výjimky: 0xc0000005
Posun chyby: 0x000000000002de46
ID chybujícího procesu: 0x1ef8
Čas spuštění chybující aplikace: 0x01ceb5de1d230682
Cesta k chybující aplikaci: C:\Windows\System32\mstsc.exe
Cesta k chybujícímu modulu: C:\WINDOWS\SYSTEM32\ntdll.dll
ID zprávy: 6e76e3a0-21d1-11e3-824d-005056c00008
Úplný název chybujícího balíčku:
ID aplikace související s chybujícím balíčkem:
Details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-20T08:48:34.000000000Z" />
<EventRecordID>36478</EventRecordID>
<Channel>Application</Channel>
<Computer>JIRKA-PC.sandster.local</Computer>
<Security />
</System>
- <EventData>
<Data>mstsc.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215e2b5</Data>
<Data>ntdll.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f938</Data>
<Data>c0000005</Data>
<Data>000000000002de46</Data>
<Data>1ef8</Data>
<Data>01ceb5de1d230682</Data>
<Data>C:\Windows\System32\mstsc.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\ntdll.dll</Data>
<Data>6e76e3a0-21d1-11e3-824d-005056c00008</Data>
<Data />
<Data />
</EventData>
</Event>
Windows Error Reporting (ID: 1001)
=======================
General
Chybný blok 127057472, typ 4
Název události: APPCRASH
Reakce: Není k dispozici.
ID souboru CAB: 0
Podpis problému:
P1: mstsc.exe
P2: 6.3.9600.16384
P3: 5215e2b5
P4: ntdll.dll
P5: 6.3.9600.16384
P6: 5215f938
P7: c0000005
P8: 000000000002de46
P9:
P10:
Připojené soubory:
C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER3B11.tmp.WERInternalMetadata.xml
C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER440B.tmp.appcompat.txt
Tyto soubory mohou být k dispozici zde:
C:\Users\Jirka.SANDSTER\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_mstsc.exe_b612095447011e21536732396929f9b226636_4012f314_1494441a
Symbol analýzy:
Opětovné hledání řešení: 0
ID hlášení: 6e76e3a0-21d1-11e3-824d-005056c00008
Stav hlášení: 1
Zakódovaný interval: 9db086049b946847d22aeaa96b0e9f58
Details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-20T08:48:37.000000000Z" />
<EventRecordID>36479</EventRecordID>
<Channel>Application</Channel>
<Computer>JIRKA-PC.sandster.local</Computer>
<Security />
</System>
- <EventData>
<Data>127057472</Data>
<Data>4</Data>
<Data>APPCRASH</Data>
<Data>Není k dispozici.</Data>
<Data>0</Data>
<Data>mstsc.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215e2b5</Data>
<Data>ntdll.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f938</Data>
<Data>c0000005</Data>
<Data>000000000002de46</Data>
<Data />
<Data />
<Data>C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER3B11.tmp.WERInternalMetadata.xml C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER440B.tmp.appcompat.txt</Data>
<Data>C:\Users\Jirka.SANDSTER\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_mstsc.exe_b612095447011e21536732396929f9b226636_4012f314_1494441a</Data>
<Data />
<Data>0</Data>
<Data>6e76e3a0-21d1-11e3-824d-005056c00008</Data>
<Data>1</Data>
<Data>9db086049b946847d22aeaa96b0e9f58</Data>
</EventData>
</Event>
Could you help me please?
Thanks

Hi Jiří,
looks like a bad Audio codec (bdmpega64.acm) causes the crash:
* Exception Analysis *
*** WARNING: Unable to verify timestamp for bdmpega64.acm
*** ERROR: Module load completed but symbols could not be loaded for bdmpega64.acm
APPLICATION_VERIFIER_HEAPS_CORRUPTED_HEAP_BLOCK_EXCEPTION_RAISED_FOR_PROBING (c)
Exception raised while verifying the heap block.
This situation happens if we really cannot determine any particular
type of corruption for the block. For instance you will get this if
during a heap free operation you pass an address that points to a
non-accessible memory area.
This can also happen for double free situations if we do not find the
block among full page heap blocks and we probe it as a light page heap block.
Arguments:
Arg1: 000000aa6c971000, Heap handle used in the call.
Arg2: 000000005d0b4440, Heap block involved in the operation.
Arg3: 0000000000000000, Size of the heap block.
Arg4: 00000000c0000005, Reserved.
FAULTING_IP:
verifier!VerifierStopMessage+28a
00007ffd`f922a43a cc int 3
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 00007ffdf922a43a (verifier!VerifierStopMessage+0x000000000000028a)
ExceptionCode: 80000003 (Break instruction exception)
ExceptionFlags: 00000000
NumberParameters: 1
Parameter[0]: 0000000000000000
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
rax=000000aa5cfc0000 rbx=0000000000000000 rcx=000000aa5cfc0000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=00007ffe08bc808a rsp=000000aa5e83cb08 rbp=000000aa5e83d950
r8=0000000000001000 r9=0000000000000000 r10=0000000000000040
r11=0000000000000286 r12=0000000000000000 r13=0000000000000000
r14=000000aa5cfb0000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe cy
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000203
ntdll!NtWaitForMultipleObjects+0xa:
00007ffe`08bc808a c3 ret
DEFAULT_BUCKET_ID: STATUS_BREAKPOINT
PROCESS_NAME: mstsc.exe
ERROR_CODE: (NTSTATUS) 0x80000003 - {AUSNAHME} Haltepunkt Im Quellprogramm wurde ein Haltepunkt erreicht.
EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - Mindestens ein Argument ist ung ltig.
EXCEPTION_PARAMETER1: 0000000000000000
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 48004
APP: mstsc.exe
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
FAULTING_THREAD: 0000000000001630
PRIMARY_PROBLEM_CLASS: STATUS_BREAKPOINT
BUGCHECK_STR: APPLICATION_FAULT_STATUS_BREAKPOINT
LAST_CONTROL_TRANSFER: from 00007ffdf92292e4 to 00007ffdf922a43a
STACK_TEXT:
ntdll!NtWaitForMultipleObjects
ntdll!RtlReportExceptionEx
ntdll!RtlReportException
verifier!AVrfpVectoredExceptionHandler
ntdll!RtlpCallVectoredHandlers
ntdll!RtlDispatchException
ntdll!KiUserExceptionDispatch
verifier!VerifierStopMessage
verifier!AVrfpDphReportCorruptedBlock
verifier!AVrfpDphCheckNormalHeapBlock$filt$0
ntdll!_C_specific_handler
ntdll!RtlpExecuteHandlerForException
ntdll!RtlDispatchException
ntdll!KiUserExceptionDispatch
verifier!AVrfpDphFindBusyMemoryNoCheck
verifier!AVrfpDphFindBusyMemory
verifier!VerifierCheckPageHeapAllocation
verifier!AVrfpHeapFree
bdmpega64
0x0
0x0
0x0
IMAGE_NAME: bdmpega64.acm
FAILURE_BUCKET_ID: STATUS_BREAKPOINT_80000003_bdmpega64.acm!Unknown
Loaded symbol image file: bdmpega64.acm
Image path: C:\Windows\System32\bdmpega64.acm
Image name: bdmpega64.acm
Timestamp: Thu Aug 09 09:40:14 2012
From what I can see the file bdmpega64.acm belongs to a tool called http://www.bandicam.com
Update the tool to the latest version 1.9.0.397:
http://www.bandicam.com/downloads/
If this doesn't fix it, remove it or disable Audio in the RDP options.
"A programmer is just a tool which converts caffeine into code"

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

Unknown Device after upgrade from windows 8.1 to windows 10

My Notebook is a HP 15 d002sl I just upgraded from windows 8.1 to windows10 and everything went fine. Now after installing all of the updated drivers I have an unknown device in my device manager. The Hardware Id's are as follows: ACPI\HPQ6001\2&DABA3FF&0 I can not find out what it is or a driver for it. Anyone else experiencing this or know what this device is and where I can get a driver for it. Much appreciated!

Hi, Does the wireless button work ? Please try: http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58720.exe Regards.

Blutooth is not working after upgrading from Windows 8.1 to Windows 10

HI I am using HP 2000 Notebook PC with serial number 5CG3245C1C and product number D9H41PA#ACJ. Recently i updated from Windows 8.1 to Windows 10. Evertything is working fine with nice speed but only issue with bluetooth , i cant see bluetooth in my system. so can any one please help me with the issue.

On Sun, 1 Feb 2015 10:34:40 +0000, Field Commander A9 wrote:
In-place upgrading from Windows 8.1 to Windows 10 will cause all desktop internet browsers to be unable to open any non-local web pages. You'll have to use netsh to reset the winsock stack to fix this.
Not necessarily. I've upgraded several systems here, ranging from tablets
to laptops to virtual machines with a combination of IE, Chrome, and
FireFox and I've not experienced this on a single system. Also, your post
is the first time I've seen this issue reported in the forums.
Paul Adare - FIM CM MVP
The problem with the gene pool is that there is no lifeguard. -- BSD
fortune
Nah, the problem is that it doesn't have enough chlorine. -- Lionel in ASR
It also lacks an undertow for the weak ones. -- Joe Creighton in ASR

Bluetooth issue after upgrading from windows 8.1 to windows 10

i upgraded from windows 8.1 to windows 10 , The experience was really nice and windows 10 work beautifully of my system. But the only thing is i am not able to find Bluetooth in my system. May be some driver issue. I have troubleshooted many times but the problem as not been solved . So any one can please help me on this.

On Sun, 1 Feb 2015 10:34:40 +0000, Field Commander A9 wrote:
In-place upgrading from Windows 8.1 to Windows 10 will cause all desktop internet browsers to be unable to open any non-local web pages. You'll have to use netsh to reset the winsock stack to fix this.
Not necessarily. I've upgraded several systems here, ranging from tablets
to laptops to virtual machines with a combination of IE, Chrome, and
FireFox and I've not experienced this on a single system. Also, your post
is the first time I've seen this issue reported in the forums.
Paul Adare - FIM CM MVP
The problem with the gene pool is that there is no lifeguard. -- BSD
fortune
Nah, the problem is that it doesn't have enough chlorine. -- Lionel in ASR
It also lacks an undertow for the weak ones. -- Joe Creighton in ASR

No internet connection after upgrade from windows 8 to windows 8.1

Similar Messages

Maybe you are looking for